diff options
Diffstat (limited to 'host/lib/usrp/usrp2/mboard_impl.cpp')
| -rw-r--r-- | host/lib/usrp/usrp2/mboard_impl.cpp | 72 |
1 files changed, 65 insertions, 7 deletions
diff --git a/host/lib/usrp/usrp2/mboard_impl.cpp b/host/lib/usrp/usrp2/mboard_impl.cpp index 7518d3114..610aade14 100644 --- a/host/lib/usrp/usrp2/mboard_impl.cpp +++ b/host/lib/usrp/usrp2/mboard_impl.cpp @@ -45,8 +45,8 @@ usrp2_mboard_impl::usrp2_mboard_impl( _iface = usrp2_iface::make(ctrl_transport); //extract the mboard rev numbers - _rev_lo = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_REV_LSB, 1).at(0); - _rev_hi = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_REV_MSB, 1).at(0); + _rev_lo = _iface->read_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV_LSB, 1).at(0); + _rev_hi = _iface->read_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV_MSB, 1).at(0); //contruct the interfaces to mboard perifs _clock_ctrl = usrp2_clock_ctrl::make(_iface); @@ -67,7 +67,7 @@ usrp2_mboard_impl::usrp2_mboard_impl( _allowed_decim_and_interp_rates.push_back(i); } - //setup the vrt rx registers + //init the rx control registers _iface->poke32(U2_REG_RX_CTRL_NSAMPS_PER_PKT, _io_helper.get_max_recv_samps_per_packet()); _iface->poke32(U2_REG_RX_CTRL_NCHANNELS, 1); _iface->poke32(U2_REG_RX_CTRL_CLEAR_OVERRUN, 1); //reset @@ -81,6 +81,12 @@ usrp2_mboard_impl::usrp2_mboard_impl( _iface->poke32(U2_REG_RX_CTRL_VRT_TRAILER, 0); _iface->poke32(U2_REG_TIME64_TPS, size_t(get_master_clock_freq())); + //init the tx control registers + _iface->poke32(U2_REG_TX_CTRL_NUM_CHAN, 0); //1 channel + _iface->poke32(U2_REG_TX_CTRL_CLEAR_STATE, 1); //reset + _iface->poke32(U2_REG_TX_CTRL_REPORT_SID, 1); //sid 1 (different from rx) + _iface->poke32(U2_REG_TX_CTRL_POLICY, U2_FLAG_TX_CTRL_POLICY_NEXT_PACKET); + //init the ddc init_ddc_config(); @@ -90,8 +96,20 @@ usrp2_mboard_impl::usrp2_mboard_impl( //initialize the clock configuration init_clock_config(); + //init the codec before the dboard + codec_init(); + //init the tx and rx dboards (do last) dboard_init(); + + //set default subdev specs + (*this)[MBOARD_PROP_RX_SUBDEV_SPEC] = subdev_spec_t(); + (*this)[MBOARD_PROP_TX_SUBDEV_SPEC] = subdev_spec_t(); + + //Issue a stop streaming command (in case it was left running). + //Since this command is issued before the networking is setup, + //most if not all junk packets will never make it to the socket. + this->issue_ddc_stream_cmd(stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); } usrp2_mboard_impl::~usrp2_mboard_impl(void){ @@ -174,14 +192,14 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ //handle the other props if (key.type() == typeid(std::string)){ if (key.as<std::string>() == "mac-addr"){ - byte_vector_t bytes = _iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_MAC_ADDR, 6); + byte_vector_t bytes = _iface->read_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, 6); val = mac_addr_t::from_bytes(bytes).to_string(); return; } if (key.as<std::string>() == "ip-addr"){ boost::asio::ip::address_v4::bytes_type bytes; - std::copy(_iface->read_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_IP_ADDR, 4), bytes); + std::copy(_iface->read_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, 4), bytes); val = boost::asio::ip::address_v4(bytes).to_string(); return; } @@ -252,6 +270,14 @@ void usrp2_mboard_impl::get(const wax::obj &key_, wax::obj &val){ } return; + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + default: UHD_THROW_PROP_GET_ERROR(); } } @@ -264,14 +290,14 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ if (key.type() == typeid(std::string)){ if (key.as<std::string>() == "mac-addr"){ byte_vector_t bytes = mac_addr_t::from_string(val.as<std::string>()).to_bytes(); - _iface->write_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_MAC_ADDR, bytes); + _iface->write_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, bytes); return; } if (key.as<std::string>() == "ip-addr"){ byte_vector_t bytes(4); std::copy(boost::asio::ip::address_v4::from_string(val.as<std::string>()).to_bytes(), bytes); - _iface->write_eeprom(I2C_ADDR_MBOARD, EE_MBOARD_IP_ADDR, bytes); + _iface->write_eeprom(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, bytes); return; } } @@ -296,6 +322,38 @@ void usrp2_mboard_impl::set(const wax::obj &key, const wax::obj &val){ issue_ddc_stream_cmd(val.as<stream_cmd_t>()); return; + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + //handle automatic + if (_rx_subdev_spec.empty()) _rx_subdev_spec.push_back( + subdev_spec_pair_t("", _dboard_manager->get_rx_subdev_names().front()) + ); + //sanity check + UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); + uhd::assert_has((*this)[MBOARD_PROP_RX_DBOARD_NAMES].as<prop_names_t>(), _rx_subdev_spec.front().db_name, "rx dboard names"); + uhd::assert_has(_dboard_manager->get_rx_subdev_names(), _rx_subdev_spec.front().sd_name, "rx subdev names"); + //set the mux + _iface->poke32(U2_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + //handle automatic + if (_tx_subdev_spec.empty()) _tx_subdev_spec.push_back( + subdev_spec_pair_t("", _dboard_manager->get_tx_subdev_names().front()) + ); + //sanity check + UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + uhd::assert_has((*this)[MBOARD_PROP_TX_DBOARD_NAMES].as<prop_names_t>(), _tx_subdev_spec.front().db_name, "tx dboard names"); + uhd::assert_has(_dboard_manager->get_tx_subdev_names(), _tx_subdev_spec.front().sd_name, "tx subdev names"); + //set the mux + _iface->poke32(U2_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + default: UHD_THROW_PROP_SET_ERROR(); } } |