diff options
Diffstat (limited to 'host/lib/usrp/usrp2/dboard_interface.cpp')
| -rw-r--r-- | host/lib/usrp/usrp2/dboard_interface.cpp | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/host/lib/usrp/usrp2/dboard_interface.cpp b/host/lib/usrp/usrp2/dboard_interface.cpp index cefd69ba9..d20465147 100644 --- a/host/lib/usrp/usrp2/dboard_interface.cpp +++ b/host/lib/usrp/usrp2/dboard_interface.cpp @@ -28,10 +28,10 @@ public: void write_aux_dac(unit_type_t, int, int); int read_aux_adc(unit_type_t, int); - void set_atr_reg(gpio_bank_t, uint16_t, uint16_t, uint16_t); - void set_gpio_ddr(gpio_bank_t, uint16_t, uint16_t); - void write_gpio(gpio_bank_t, uint16_t, uint16_t); - uint16_t read_gpio(gpio_bank_t); + void set_atr_reg(gpio_bank_t, boost::uint16_t, boost::uint16_t, boost::uint16_t); + void set_gpio_ddr(gpio_bank_t, boost::uint16_t, boost::uint16_t); + void write_gpio(gpio_bank_t, boost::uint16_t, boost::uint16_t); + boost::uint16_t read_gpio(gpio_bank_t); void write_i2c(int, const byte_vector_t &); byte_vector_t read_i2c(int, size_t); @@ -89,7 +89,7 @@ double usrp2_dboard_interface::get_tx_clock_rate(void){ * \param bank the dboard interface gpio bank enum * \return an over the wire representation */ -static uint8_t gpio_bank_to_otw(dboard_interface::gpio_bank_t bank){ +static boost::uint8_t gpio_bank_to_otw(dboard_interface::gpio_bank_t bank){ switch(bank){ case uhd::usrp::dboard_interface::GPIO_TX_BANK: return USRP2_DIR_TX; case uhd::usrp::dboard_interface::GPIO_RX_BANK: return USRP2_DIR_RX; @@ -97,7 +97,7 @@ static uint8_t gpio_bank_to_otw(dboard_interface::gpio_bank_t bank){ throw std::invalid_argument("unknown gpio bank type"); } -void usrp2_dboard_interface::set_gpio_ddr(gpio_bank_t bank, uint16_t value, uint16_t mask){ +void usrp2_dboard_interface::set_gpio_ddr(gpio_bank_t bank, boost::uint16_t value, boost::uint16_t mask){ //setup the out data usrp2_ctrl_data_t out_data; out_data.id = htonl(USRP2_CTRL_ID_USE_THESE_GPIO_DDR_SETTINGS_BRO); @@ -110,7 +110,7 @@ void usrp2_dboard_interface::set_gpio_ddr(gpio_bank_t bank, uint16_t value, uint ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_GOT_THE_GPIO_DDR_SETTINGS_DUDE); } -void usrp2_dboard_interface::write_gpio(gpio_bank_t bank, uint16_t value, uint16_t mask){ +void usrp2_dboard_interface::write_gpio(gpio_bank_t bank, boost::uint16_t value, boost::uint16_t mask){ //setup the out data usrp2_ctrl_data_t out_data; out_data.id = htonl(USRP2_CTRL_ID_SET_YOUR_GPIO_PIN_OUTS_BRO); @@ -123,7 +123,7 @@ void usrp2_dboard_interface::write_gpio(gpio_bank_t bank, uint16_t value, uint16 ASSERT_THROW(htonl(in_data.id) == USRP2_CTRL_ID_I_SET_THE_GPIO_PIN_OUTS_DUDE); } -uint16_t usrp2_dboard_interface::read_gpio(gpio_bank_t bank){ +boost::uint16_t usrp2_dboard_interface::read_gpio(gpio_bank_t bank){ //setup the out data usrp2_ctrl_data_t out_data; out_data.id = htonl(USRP2_CTRL_ID_GIVE_ME_YOUR_GPIO_PIN_VALS_BRO); @@ -135,7 +135,7 @@ uint16_t usrp2_dboard_interface::read_gpio(gpio_bank_t bank){ return ntohs(in_data.data.gpio_config.value); } -void usrp2_dboard_interface::set_atr_reg(gpio_bank_t bank, uint16_t tx_value, uint16_t rx_value, uint16_t mask){ +void usrp2_dboard_interface::set_atr_reg(gpio_bank_t bank, boost::uint16_t tx_value, boost::uint16_t rx_value, boost::uint16_t mask){ //setup the out data usrp2_ctrl_data_t out_data; out_data.id = htonl(USRP2_CTRL_ID_USE_THESE_ATR_SETTINGS_BRO); @@ -158,7 +158,7 @@ void usrp2_dboard_interface::set_atr_reg(gpio_bank_t bank, uint16_t tx_value, ui * \param dev the dboard interface spi dev enum * \return an over the wire representation */ -static uint8_t spi_dev_to_otw(dboard_interface::spi_dev_t dev){ +static boost::uint8_t spi_dev_to_otw(dboard_interface::spi_dev_t dev){ switch(dev){ case uhd::usrp::dboard_interface::SPI_TX_DEV: return USRP2_DIR_TX; case uhd::usrp::dboard_interface::SPI_RX_DEV: return USRP2_DIR_RX; @@ -172,7 +172,7 @@ static uint8_t spi_dev_to_otw(dboard_interface::spi_dev_t dev){ * \param latch the dboard interface spi latch enum * \return an over the wire representation */ -static uint8_t spi_latch_to_otw(dboard_interface::spi_latch_t latch){ +static boost::uint8_t spi_latch_to_otw(dboard_interface::spi_latch_t latch){ switch(latch){ case uhd::usrp::dboard_interface::SPI_LATCH_RISE: return USRP2_CLK_EDGE_RISE; case uhd::usrp::dboard_interface::SPI_LATCH_FALL: return USRP2_CLK_EDGE_FALL; @@ -186,7 +186,7 @@ static uint8_t spi_latch_to_otw(dboard_interface::spi_latch_t latch){ * \param push the dboard interface spi push enum * \return an over the wire representation */ -static uint8_t spi_push_to_otw(dboard_interface::spi_push_t push){ +static boost::uint8_t spi_push_to_otw(dboard_interface::spi_push_t push){ switch(push){ case uhd::usrp::dboard_interface::SPI_PUSH_RISE: return USRP2_CLK_EDGE_RISE; case uhd::usrp::dboard_interface::SPI_PUSH_FALL: return USRP2_CLK_EDGE_FALL; @@ -286,7 +286,7 @@ dboard_interface::byte_vector_t usrp2_dboard_interface::read_i2c(int i2c_addr, s * \param unit the dboard interface unit type enum * \return an over the wire representation */ -static uint8_t spi_dev_to_otw(dboard_interface::unit_type_t unit){ +static boost::uint8_t spi_dev_to_otw(dboard_interface::unit_type_t unit){ switch(unit){ case uhd::usrp::dboard_interface::UNIT_TYPE_TX: return USRP2_DIR_TX; case uhd::usrp::dboard_interface::UNIT_TYPE_RX: return USRP2_DIR_RX; @@ -300,7 +300,7 @@ void usrp2_dboard_interface::write_aux_dac(dboard_interface::unit_type_t unit, i out_data.id = htonl(USRP2_CTRL_ID_WRITE_THIS_TO_THE_AUX_DAC_BRO); out_data.data.aux_args.dir = spi_dev_to_otw(unit); out_data.data.aux_args.which = which; - out_data.data.aux_args.dir = htonl(value); + out_data.data.aux_args.value = htonl(value); //send and recv usrp2_ctrl_data_t in_data = _impl->ctrl_send_and_recv(out_data); |