diff options
Diffstat (limited to 'host/lib/usrp/usrp2/clock_ctrl.cpp')
| -rw-r--r-- | host/lib/usrp/usrp2/clock_ctrl.cpp | 155 |
1 files changed, 155 insertions, 0 deletions
diff --git a/host/lib/usrp/usrp2/clock_ctrl.cpp b/host/lib/usrp/usrp2/clock_ctrl.cpp new file mode 100644 index 000000000..db8d8a886 --- /dev/null +++ b/host/lib/usrp/usrp2/clock_ctrl.cpp @@ -0,0 +1,155 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9510_regs.hpp" +#include "usrp2_regs.hpp" //spi slave constants +#include <boost/cstdint.hpp> + +using namespace uhd; + +/*! + * A usrp2 clock control specific to the ad9510 ic. + */ +class clock_ctrl_impl : public clock_ctrl{ +public: + clock_ctrl_impl(usrp2_iface::sptr iface){ + _iface = iface; + + _ad9510_regs.cp_current_setting = ad9510_regs_t::CP_CURRENT_SETTING_3_0MA; + this->write_reg(0x09); + + // Setup the clock registers to 100MHz: + // This was already done by the firmware (or the host couldnt communicate). + // We could remove this part, and just leave it to the firmware. + // But why not leave it in for those who want to mess with clock settings? + // 100mhz = 10mhz/R * (P*B + A) + + _ad9510_regs.pll_power_down = ad9510_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9510_regs.prescaler_value = ad9510_regs_t::PRESCALER_VALUE_DIV2; + this->write_reg(0x0A); + + _ad9510_regs.acounter = 0; + this->write_reg(0x04); + + _ad9510_regs.bcounter_msb = 0; + _ad9510_regs.bcounter_lsb = 5; + this->write_reg(0x05); + this->write_reg(0x06); + + _ad9510_regs.ref_counter_msb = 0; + _ad9510_regs.ref_counter_lsb = 1; // r divider = 1 + this->write_reg(0x0B); + this->write_reg(0x0C); + + /* regs will be updated in commands below */ + + this->enable_external_ref(false); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + + /* private clock enables, must be set here */ + this->enable_dac_clock(true); + this->enable_adc_clock(true); + + } + + ~clock_ctrl_impl(void){ + /* private clock enables, must be set here */ + this->enable_dac_clock(false); + this->enable_adc_clock(false); + } + + //uses output clock 7 (cmos) + void enable_rx_dboard_clock(bool enb){ + _ad9510_regs.power_down_lvds_cmos_out7 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out7 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT7_CMOS; + _ad9510_regs.output_level_lvds_out7 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT7_1_75MA; + this->write_reg(0x43); + this->update_regs(); + } + + //uses output clock 6 (cmos) + void enable_tx_dboard_clock(bool enb){ + _ad9510_regs.power_down_lvds_cmos_out6 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out6 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT6_CMOS; + _ad9510_regs.output_level_lvds_out6 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT6_1_75MA; + this->write_reg(0x42); + this->update_regs(); + } + + /*! + * If we are to use an external reference, enable the charge pump. + * \param enb true to enable the CP + */ + void enable_external_ref(bool enb){ + _ad9510_regs.charge_pump_mode = (enb)? + ad9510_regs_t::CHARGE_PUMP_MODE_NORMAL : + ad9510_regs_t::CHARGE_PUMP_MODE_3STATE ; + _ad9510_regs.pll_mux_control = ad9510_regs_t::PLL_MUX_CONTROL_DLD_HIGH; + _ad9510_regs.pfd_polarity = ad9510_regs_t::PFD_POLARITY_POS; + this->write_reg(0x08); + this->update_regs(); + } + +private: + /*! + * Write a single register to the spi regs. + * \param addr the address to write + */ + void write_reg(boost::uint8_t addr){ + boost::uint32_t data = _ad9510_regs.get_write_reg(addr); + _iface->transact_spi(SPI_SS_AD9510, spi_config_t::EDGE_RISE, data, 24, false /*no rb*/); + } + + /*! + * Tells the ad9510 to latch the settings into the operational registers. + */ + void update_regs(void){ + _ad9510_regs.update_registers = 1; + this->write_reg(0x5a); + } + + //uses output clock 3 (pecl) + void enable_dac_clock(bool enb){ + _ad9510_regs.power_down_lvpecl_out3 = (enb)? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out3 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT3_810MV; + this->write_reg(0x3F); + this->update_regs(); + } + + //uses output clock 4 (lvds) + void enable_adc_clock(bool enb){ + _ad9510_regs.power_down_lvds_cmos_out4 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out4 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT4_LVDS; + _ad9510_regs.output_level_lvds_out4 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT4_1_75MA; + this->write_reg(0x40); + this->update_regs(); + } + + usrp2_iface::sptr _iface; + ad9510_regs_t _ad9510_regs; +}; + +/*********************************************************************** + * Public make function for the ad9510 clock control + **********************************************************************/ +clock_ctrl::sptr clock_ctrl::make(usrp2_iface::sptr iface){ + return sptr(new clock_ctrl_impl(iface)); +} |