diff options
Diffstat (limited to 'host/lib/usrp/usrp2/clock_ctrl.cpp')
| -rw-r--r-- | host/lib/usrp/usrp2/clock_ctrl.cpp | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/host/lib/usrp/usrp2/clock_ctrl.cpp b/host/lib/usrp/usrp2/clock_ctrl.cpp new file mode 100644 index 000000000..7572ed6b1 --- /dev/null +++ b/host/lib/usrp/usrp2/clock_ctrl.cpp @@ -0,0 +1,364 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9510_regs.hpp" +#include "usrp2_regs.hpp" //spi slave constants +#include "usrp2_clk_regs.hpp" +#include <uhd/utils/assert_has.hpp> +#include <boost/cstdint.hpp> +#include <boost/lexical_cast.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> + +using namespace uhd; + +static const bool enb_test_clk = false; + +/*! + * A usrp2 clock control specific to the ad9510 ic. + */ +class usrp2_clock_ctrl_impl : public usrp2_clock_ctrl{ +public: + usrp2_clock_ctrl_impl(usrp2_iface::sptr iface){ + _iface = iface; + clk_regs = usrp2_clk_regs_t(_iface->get_rev()); + + _ad9510_regs.cp_current_setting = ad9510_regs_t::CP_CURRENT_SETTING_3_0MA; + this->write_reg(clk_regs.pll_3); + + // Setup the clock registers to 100MHz: + // This was already done by the firmware (or the host couldnt communicate). + // We could remove this part, and just leave it to the firmware. + // But why not leave it in for those who want to mess with clock settings? + // 100mhz = 10mhz/R * (P*B + A) + + _ad9510_regs.pll_power_down = ad9510_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9510_regs.prescaler_value = ad9510_regs_t::PRESCALER_VALUE_DIV2; + this->write_reg(clk_regs.pll_4); + + _ad9510_regs.acounter = 0; + this->write_reg(clk_regs.acounter); + + _ad9510_regs.bcounter_msb = 0; + _ad9510_regs.bcounter_lsb = 5; + this->write_reg(clk_regs.bcounter_msb); + this->write_reg(clk_regs.bcounter_lsb); + + _ad9510_regs.ref_counter_msb = 0; + _ad9510_regs.ref_counter_lsb = 1; // r divider = 1 + this->write_reg(clk_regs.ref_counter_msb); + this->write_reg(clk_regs.ref_counter_lsb); + + /* regs will be updated in commands below */ + + this->enable_external_ref(false); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + this->enable_mimo_clock_out(false); + + /* private clock enables, must be set here */ + this->enable_dac_clock(true); + this->enable_adc_clock(true); + this->enable_test_clock(enb_test_clk); + } + + ~usrp2_clock_ctrl_impl(void){ + //power down clock outputs + this->enable_external_ref(false); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + this->enable_dac_clock(false); + this->enable_adc_clock(false); + this->enable_mimo_clock_out(false); + this->enable_test_clock(false); + } + + void enable_mimo_clock_out(bool enb){ + //calculate the low and high dividers + size_t divider = size_t(this->get_master_clock_rate()/10e6); + size_t high = divider/2; + size_t low = divider - high; + + switch(clk_regs.exp){ + case 2: //U2 rev 3 + _ad9510_regs.power_down_lvpecl_out2 = enb? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out2 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT2_810MV; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out2 = low - 1; + _ad9510_regs.divider_high_cycles_out2 = high - 1; + _ad9510_regs.bypass_divider_out2 = 0; + break; + + case 5: //U2 rev 4 + _ad9510_regs.power_down_lvds_cmos_out5 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out5 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT5_LVDS; + _ad9510_regs.output_level_lvds_out5 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT5_1_75MA; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out5 = low - 1; + _ad9510_regs.divider_high_cycles_out5 = high - 1; + _ad9510_regs.bypass_divider_out5 = 0; + break; + + case 6: //U2+ + _ad9510_regs.power_down_lvds_cmos_out6 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out6 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT6_LVDS; + _ad9510_regs.output_level_lvds_out6 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT6_1_75MA; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out6 = low - 1; + _ad9510_regs.divider_high_cycles_out6 = high - 1; + _ad9510_regs.bypass_divider_out5 = 0; + break; + + default: + break; + } + this->write_reg(clk_regs.output(clk_regs.exp)); + this->write_reg(clk_regs.div_lo(clk_regs.exp)); + this->update_regs(); + } + + //uses output clock 7 (cmos) + void enable_rx_dboard_clock(bool enb){ + _ad9510_regs.power_down_lvds_cmos_out7 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out7 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT7_CMOS; + _ad9510_regs.output_level_lvds_out7 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT7_1_75MA; + this->write_reg(clk_regs.output(clk_regs.rx_db)); + this->update_regs(); + } + + void set_rate_rx_dboard_clock(double rate){ + assert_has(get_rates_rx_dboard_clock(), rate, "rx dboard clock rate"); + size_t divider = size_t(get_master_clock_rate()/rate); + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out7 = (divider == 1)? 1 : 0; + //calculate the low and high dividers + size_t high = divider/2; + size_t low = divider - high; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out7 = low - 1; + _ad9510_regs.divider_high_cycles_out7 = high - 1; + //write the registers + this->write_reg(clk_regs.div_lo(clk_regs.rx_db)); + this->write_reg(clk_regs.div_hi(clk_regs.rx_db)); + this->update_regs(); + } + + std::vector<double> get_rates_rx_dboard_clock(void){ + std::vector<double> rates; + for (size_t i = 1; i <= 16+16; i++) rates.push_back(get_master_clock_rate()/i); + return rates; + } + + //uses output clock 6 (cmos) on USRP2 and output clock 5 (cmos) on USRP2+ + void enable_tx_dboard_clock(bool enb){ + switch(clk_regs.tx_db) { + case 5: //USRP2+ + _ad9510_regs.power_down_lvds_cmos_out5 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out5 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT5_CMOS; + _ad9510_regs.output_level_lvds_out5 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT5_1_75MA; + break; + case 6: //USRP2 + _ad9510_regs.power_down_lvds_cmos_out6 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out6 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT6_CMOS; + _ad9510_regs.output_level_lvds_out6 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT6_1_75MA; + break; + } + + this->write_reg(clk_regs.output(clk_regs.tx_db)); + this->update_regs(); + } + + void set_rate_tx_dboard_clock(double rate){ + assert_has(get_rates_tx_dboard_clock(), rate, "tx dboard clock rate"); + size_t divider = size_t(get_master_clock_rate()/rate); + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out6 = (divider == 1)? 1 : 0; + //calculate the low and high dividers + size_t high = divider/2; + size_t low = divider - high; + + switch(clk_regs.tx_db) { + case 5: //USRP2+ + _ad9510_regs.bypass_divider_out5 = (divider == 1)? 1 : 0; + _ad9510_regs.divider_low_cycles_out5 = low - 1; + _ad9510_regs.divider_high_cycles_out5 = high - 1; + break; + case 6: //USRP2 + //bypass when the divider ratio is one + _ad9510_regs.bypass_divider_out6 = (divider == 1)? 1 : 0; + //set the registers (divider - 1) + _ad9510_regs.divider_low_cycles_out6 = low - 1; + _ad9510_regs.divider_high_cycles_out6 = high - 1; + break; + } + + //write the registers + this->write_reg(clk_regs.div_hi(clk_regs.tx_db)); + this->write_reg(clk_regs.div_lo(clk_regs.tx_db)); + this->update_regs(); + } + + std::vector<double> get_rates_tx_dboard_clock(void){ + return get_rates_rx_dboard_clock(); //same master clock, same dividers... + } + + void enable_test_clock(bool enb) { + _ad9510_regs.power_down_lvpecl_out0 = enb? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT0_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT0_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out0 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT0_810MV; + _ad9510_regs.divider_low_cycles_out0 = 0; + _ad9510_regs.divider_high_cycles_out0 = 0; + _ad9510_regs.bypass_divider_out0 = 1; + this->write_reg(0x3c); + this->write_reg(0x48); + this->write_reg(0x49); + } + + /*! + * If we are to use an external reference, enable the charge pump. + * \param enb true to enable the CP + */ + void enable_external_ref(bool enb){ + _ad9510_regs.charge_pump_mode = (enb)? + ad9510_regs_t::CHARGE_PUMP_MODE_NORMAL : + ad9510_regs_t::CHARGE_PUMP_MODE_3STATE ; + _ad9510_regs.pll_mux_control = ad9510_regs_t::PLL_MUX_CONTROL_DLD_HIGH; + _ad9510_regs.pfd_polarity = ad9510_regs_t::PFD_POLARITY_POS; + this->write_reg(clk_regs.pll_2); + this->update_regs(); + } + + double get_master_clock_rate(void){ + return 100e6; + } + + void set_mimo_clock_delay(double delay) { + //delay_val is a 5-bit value (0-31) for fine control + //the equations below determine delay for a given ramp current, # of caps and fine delay register + //delay range: + //range_ns = 200*((caps+3)/i_ramp_ua)*1.3286 + //offset (zero delay): + //offset_ns = 0.34 + (1600 - i_ramp_ua)*1e-4 + ((caps-1)/ramp)*6 + //delay_ns = offset_ns + range_ns * delay / 31 + + int delay_val = boost::math::iround(delay/9.744e-9*31); + + if(delay_val == 0) { + switch(clk_regs.exp) { + case 5: + _ad9510_regs.delay_control_out5 = 1; + break; + case 6: + _ad9510_regs.delay_control_out6 = 1; + break; + default: + break; //delay not supported on U2 rev 3 + } + } else { + switch(clk_regs.exp) { + case 5: + _ad9510_regs.delay_control_out5 = 0; + _ad9510_regs.ramp_current_out5 = ad9510_regs_t::RAMP_CURRENT_OUT5_200UA; + _ad9510_regs.ramp_capacitor_out5 = ad9510_regs_t::RAMP_CAPACITOR_OUT5_4CAPS; + _ad9510_regs.delay_fine_adjust_out5 = delay_val; + this->write_reg(0x34); + this->write_reg(0x35); + this->write_reg(0x36); + break; + case 6: + _ad9510_regs.delay_control_out6 = 0; + _ad9510_regs.ramp_current_out6 = ad9510_regs_t::RAMP_CURRENT_OUT6_200UA; + _ad9510_regs.ramp_capacitor_out6 = ad9510_regs_t::RAMP_CAPACITOR_OUT6_4CAPS; + _ad9510_regs.delay_fine_adjust_out6 = delay_val; + this->write_reg(0x38); + this->write_reg(0x39); + this->write_reg(0x3A); + break; + default: + break; + } + } + } + +private: + /*! + * Write a single register to the spi regs. + * \param addr the address to write + */ + void write_reg(boost::uint8_t addr){ + boost::uint32_t data = _ad9510_regs.get_write_reg(addr); + _iface->write_spi(SPI_SS_AD9510, spi_config_t::EDGE_RISE, data, 24); + } + + /*! + * Tells the ad9510 to latch the settings into the operational registers. + */ + void update_regs(void){ + _ad9510_regs.update_registers = 1; + this->write_reg(clk_regs.update); + } + + //uses output clock 3 (pecl) + //this is the same between USRP2 and USRP2+ and doesn't get a switch statement + void enable_dac_clock(bool enb){ + _ad9510_regs.power_down_lvpecl_out3 = (enb)? + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_NORMAL : + ad9510_regs_t::POWER_DOWN_LVPECL_OUT3_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out3 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT3_810MV; + _ad9510_regs.bypass_divider_out3 = 1; + this->write_reg(clk_regs.output(clk_regs.dac)); + this->write_reg(clk_regs.div_hi(clk_regs.dac)); + this->update_regs(); + } + + //uses output clock 4 (lvds) on USRP2 and output clock 2 (lvpecl) on USRP2+ + void enable_adc_clock(bool enb){ + switch(clk_regs.adc) { + case 2: + _ad9510_regs.power_down_lvpecl_out2 = enb? ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_NORMAL : ad9510_regs_t::POWER_DOWN_LVPECL_OUT2_SAFE_PD; + _ad9510_regs.output_level_lvpecl_out2 = ad9510_regs_t::OUTPUT_LEVEL_LVPECL_OUT2_500MV; + _ad9510_regs.bypass_divider_out2 = 1; + break; + case 4: + _ad9510_regs.power_down_lvds_cmos_out4 = enb? 0 : 1; + _ad9510_regs.lvds_cmos_select_out4 = ad9510_regs_t::LVDS_CMOS_SELECT_OUT4_LVDS; + _ad9510_regs.output_level_lvds_out4 = ad9510_regs_t::OUTPUT_LEVEL_LVDS_OUT4_1_75MA; + _ad9510_regs.bypass_divider_out4 = 1; + break; + } + + this->write_reg(clk_regs.output(clk_regs.adc)); + this->write_reg(clk_regs.div_hi(clk_regs.adc)); + this->update_regs(); + } + + usrp2_iface::sptr _iface; + + usrp2_clk_regs_t clk_regs; + ad9510_regs_t _ad9510_regs; +}; + +/*********************************************************************** + * Public make function for the ad9510 clock control + **********************************************************************/ +usrp2_clock_ctrl::sptr usrp2_clock_ctrl::make(usrp2_iface::sptr iface){ + return sptr(new usrp2_clock_ctrl_impl(iface)); +} |