diff options
Diffstat (limited to 'host/lib/usrp/e100/e100_regs.hpp')
| -rw-r--r-- | host/lib/usrp/e100/e100_regs.hpp | 130 |
1 files changed, 29 insertions, 101 deletions
diff --git a/host/lib/usrp/e100/e100_regs.hpp b/host/lib/usrp/e100/e100_regs.hpp index 75be2cfbe..654163dce 100644 --- a/host/lib/usrp/e100/e100_regs.hpp +++ b/host/lib/usrp/e100/e100_regs.hpp @@ -15,55 +15,45 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // -//////////////////////////////////////////////////////////////// -// -// Memory map for embedded wishbone bus -// -//////////////////////////////////////////////////////////////// - -// All addresses are byte addresses. All accesses are word (16-bit) accesses. -// This means that address bit 0 is usually 0. -// There are 11 bits of address for the control. - #ifndef INCLUDED_E100_REGS_HPP #define INCLUDED_E100_REGS_HPP -///////////////////////////////////////////////////// -// Slave pointers +#include <boost/cstdint.hpp> -#define E100_REG_SLAVE(n) ((n)<<7) +#define TOREG(x) ((x)*4) -///////////////////////////////////////////////////// -// Slave 0 -- Misc Regs +#define localparam static const int -#define E100_REG_MISC_BASE E100_REG_SLAVE(0) +localparam SR_MISC = 0; // 5 +localparam SR_USER_REGS = 5; // 2 -#define E100_REG_MISC_LED E100_REG_MISC_BASE + 0 -#define E100_REG_MISC_SW E100_REG_MISC_BASE + 2 -#define E100_REG_MISC_CGEN_CTRL E100_REG_MISC_BASE + 4 -#define E100_REG_MISC_CGEN_ST E100_REG_MISC_BASE + 6 -#define E100_REG_MISC_TEST E100_REG_MISC_BASE + 8 -#define E100_REG_MISC_RX_LEN E100_REG_MISC_BASE + 10 -#define E100_REG_MISC_TX_LEN E100_REG_MISC_BASE + 12 -#define E100_REG_MISC_XFER_RATE E100_REG_MISC_BASE + 14 +localparam SR_TX_CTRL = 32; // 6 +localparam SR_TX_DSP = 40; // 5 +localparam SR_TX_FE = 48; // 5 -///////////////////////////////////////////////////// -// Slave 1 -- UART -// CLKDIV is 16 bits, others are only 8 +localparam SR_RX_CTRL0 = 96; // 9 +localparam SR_RX_DSP0 = 106; // 7 +localparam SR_RX_FE = 114; // 5 -#define E100_REG_UART_BASE E100_REG_SLAVE(1) +localparam SR_RX_CTRL1 = 128; // 9 +localparam SR_RX_DSP1 = 138; // 7 -#define E100_REG_UART_CLKDIV E100_REG_UART_BASE + 0 -#define E100_REG_UART_TXLEVEL E100_REG_UART_BASE + 2 -#define E100_REG_UART_RXLEVEL E100_REG_UART_BASE + 4 -#define E100_REG_UART_TXCHAR E100_REG_UART_BASE + 6 -#define E100_REG_UART_RXCHAR E100_REG_UART_BASE + 8 +localparam SR_TIME64 = 192; // 6 +localparam SR_SPI = 208; // 3 +localparam SR_I2C = 216; // 1 +localparam SR_GPIO = 224; // 5 -///////////////////////////////////////////////////// -// Slave 2 -- SPI Core -//these are 32-bit registers mapped onto the 16-bit Wishbone bus. -//Using peek32/poke32 should allow transparent use of these registers. -#define E100_REG_SPI_BASE E100_REG_SLAVE(2) +#define REG_RB_TIME_NOW_HI TOREG(10) +#define REG_RB_TIME_NOW_LO TOREG(11) +#define REG_RB_TIME_PPS_HI TOREG(14) +#define REG_RB_TIME_PPS_LO TOREG(15) +#define REG_RB_SPI TOREG(0) +#define REG_RB_COMPAT TOREG(1) +#define REG_RB_GPIO TOREG(3) +#define REG_RB_I2C TOREG(2) +#define REG_RB_CONFIG0 TOREG(4) +#define REG_RB_CONFIG1 TOREG(5) +#define REG_RB_NUM_RX_DSP TOREG(6) //spi slave constants #define UE_SPI_SS_AD9522 (1 << 3) @@ -71,67 +61,5 @@ #define UE_SPI_SS_TX_DB (1 << 1) #define UE_SPI_SS_RX_DB (1 << 0) -//////////////////////////////////////////////// -// Slave 3 -- I2C Core - -#define E100_REG_I2C_BASE E100_REG_SLAVE(3) - -//////////////////////////////////////////////// -// Slave 5 -- Error messages buffer - -#define E100_REG_ERR_BUFF E100_REG_SLAVE(5) - -/////////////////////////////////////////////////// -// Slave 7 -- Readback Mux 32 - -#define E100_REG_RB_MUX_32_BASE E100_REG_SLAVE(7) - -#define E100_REG_RB_TIME_NOW_HI E100_REG_RB_MUX_32_BASE + 0 -#define E100_REG_RB_TIME_NOW_LO E100_REG_RB_MUX_32_BASE + 4 -#define E100_REG_RB_TIME_PPS_HI E100_REG_RB_MUX_32_BASE + 8 -#define E100_REG_RB_TIME_PPS_LO E100_REG_RB_MUX_32_BASE + 12 -#define E100_REG_RB_MISC_TEST32 E100_REG_RB_MUX_32_BASE + 16 -#define E100_REG_RB_ERR_STATUS E100_REG_RB_MUX_32_BASE + 20 -#define E100_REG_RB_COMPAT E100_REG_RB_MUX_32_BASE + 24 -#define E100_REG_RB_GPIO E100_REG_RB_MUX_32_BASE + 28 - -//////////////////////////////////////////////////// -// Slave 8 -- Settings Bus -// -// Output-only, no readback, 64 registers total -// Each register must be written 64 bits at a time -// First the address xxx_xx00 and then xxx_xx10 - -// 64 total regs in address space -#define UE_SR_RX_CTRL0 0 // 9 regs (+0 to +8) -#define UE_SR_RX_DSP0 10 // 4 regs (+0 to +3) -#define UE_SR_RX_CTRL1 16 // 9 regs (+0 to +8) -#define UE_SR_RX_DSP1 26 // 4 regs (+0 to +3) -#define UE_SR_ERR_CTRL 30 // 1 reg -#define UE_SR_TX_CTRL 32 // 4 regs (+0 to +3) -#define UE_SR_TX_DSP 38 // 3 regs (+0 to +2) - -#define UE_SR_TIME64 42 // 6 regs (+0 to +5) -#define UE_SR_RX_FRONT 48 // 5 regs (+0 to +4) -#define UE_SR_TX_FRONT 54 // 5 regs (+0 to +4) - -#define UE_SR_REG_TEST32 60 // 1 reg -#define UE_SR_CLEAR_FIFO 61 // 1 reg -#define UE_SR_GLOBAL_RESET 63 // 1 reg -#define UE_SR_USER_REGS 64 // 2 regs - -#define UE_SR_GPIO 128 - -#define E100_REG_SR_ADDR(n) (E100_REG_SLAVE(8) + (4*(n))) - -#define E100_REG_SR_MISC_TEST32 E100_REG_SR_ADDR(UE_SR_REG_TEST32) -#define E100_REG_SR_ERR_CTRL E100_REG_SR_ADDR(UE_SR_ERR_CTRL) - -///////////////////////////////////////////////// -// Magic reset regs -//////////////////////////////////////////////// -#define E100_REG_CLEAR_FIFO E100_REG_SR_ADDR(UE_SR_CLEAR_FIFO) -#define E100_REG_GLOBAL_RESET E100_REG_SR_ADDR(UE_SR_GLOBAL_RESET) - -#endif +#endif /*INCLUDED_E100_REGS_HPP*/ |