diff options
Diffstat (limited to 'host/lib/usrp/dboard/db_sbx_version3.cpp')
| -rw-r--r-- | host/lib/usrp/dboard/db_sbx_version3.cpp | 25 |
1 files changed, 16 insertions, 9 deletions
diff --git a/host/lib/usrp/dboard/db_sbx_version3.cpp b/host/lib/usrp/dboard/db_sbx_version3.cpp index 6e20d5882..2765d530c 100644 --- a/host/lib/usrp/dboard/db_sbx_version3.cpp +++ b/host/lib/usrp/dboard/db_sbx_version3.cpp @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -75,7 +75,6 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar if(ref_freq <= 12.5e6) D = adf4350_regs_t::REFERENCE_DOUBLER_ENABLED; //increase RF divider until acceptable VCO frequency - //start with target_freq*2 because mixer has divide by 2 double vco_freq = target_freq; while (vco_freq < 2.2e9) { vco_freq *= 2; @@ -83,7 +82,7 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar } //use 8/9 prescaler for vco_freq > 3 GHz (pg.18 prescaler) - adf4350_regs_t::prescaler_t prescaler = vco_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; + adf4350_regs_t::prescaler_t prescaler = target_freq > 3e9 ? adf4350_regs_t::PRESCALER_8_9 : adf4350_regs_t::PRESCALER_4_5; /* * The goal here is to loop though possible R dividers, @@ -91,7 +90,7 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar * (frac) dividers. * * Calculate the N and F dividers for each set of values. - * The loop exists when it meets all of the constraints. + * The loop exits when it meets all of the constraints. * The resulting loop values are loaded into the registers. * * from pg.21 @@ -110,7 +109,7 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar if (pfd_freq > 25e6) continue; //ignore fractional part of tuning - N = int(std::floor(vco_freq/pfd_freq)); + N = int(std::floor(target_freq/pfd_freq)); //keep N > minimum int divider requirement if (N < prescaler_to_min_int_div[prescaler]) continue; @@ -125,7 +124,7 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar //Fractional-N calculation MOD = 4095; //max fractional accuracy - FRAC = int((vco_freq/pfd_freq - N)*MOD); + FRAC = int((target_freq/pfd_freq - N)*MOD); //Reference divide-by-2 for 50% duty cycle // if R even, move one divide by 2 to to regs.reference_divide_by_2 @@ -135,12 +134,12 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar } //actual frequency calculation - actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))/RFdiv); + actual_freq = double((N + (double(FRAC)/double(MOD)))*ref_freq*(1+int(D))/(R*(1+int(T)))); UHD_LOGV(often) << boost::format("SBX Intermediates: ref=%0.2f, outdiv=%f, fbdiv=%f") % (ref_freq*(1+int(D))/(R*(1+int(T)))) % double(RFdiv*2) % double(N + double(FRAC)/double(MOD)) << std::endl - << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d, LD=%s" - ) % R % BS % N % FRAC % MOD % T % D % RFdiv % self_base->get_locked(unit).to_pp_string() << std::endl + << boost::format("SBX tune: R=%d, BS=%d, N=%d, FRAC=%d, MOD=%d, T=%d, D=%d, RFdiv=%d" + ) % R % BS % N % FRAC % MOD % T % D % RFdiv << std::endl << boost::format("SBX Frequencies (MHz): REQ=%0.2f, ACT=%0.2f, VCO=%0.2f, PFD=%0.2f, BAND=%0.2f" ) % (target_freq/1e6) % (actual_freq/1e6) % (vco_freq/1e6) % (pfd_freq/1e6) % (pfd_freq/BS/1e6) << std::endl; @@ -155,6 +154,9 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar regs.frac_12_bit = FRAC; regs.int_16_bit = N; regs.mod_12_bit = MOD; + regs.clock_divider_12_bit = std::max(1, int(std::ceil(400e-6*pfd_freq/MOD))); + regs.feedback_select = adf4350_regs_t::FEEDBACK_SELECT_DIVIDED; + regs.clock_div_mode = adf4350_regs_t::CLOCK_DIV_MODE_RESYNC_ENABLE; regs.prescaler = prescaler; regs.r_counter_10_bit = R; regs.reference_divide_by_2 = T; @@ -163,6 +165,11 @@ double sbx_xcvr::sbx_version3::set_lo_freq(dboard_iface::unit_t unit, double tar UHD_ASSERT_THROW(rfdivsel_to_enum.has_key(RFdiv)); regs.rf_divider_select = rfdivsel_to_enum[RFdiv]; + //reset the N and R counter + regs.counter_reset = adf4350_regs_t::COUNTER_RESET_ENABLED; + self_base->get_iface()->write_spi(unit, spi_config_t::EDGE_RISE, regs.get_reg(2), 32); + regs.counter_reset = adf4350_regs_t::COUNTER_RESET_DISABLED; + //write the registers //correct power-up sequence to write registers (5, 4, 3, 2, 1, 0) int addr; |