diff options
Diffstat (limited to 'host/lib/usrp/dboard/db_rfx.cpp')
| -rw-r--r-- | host/lib/usrp/dboard/db_rfx.cpp | 24 |
1 files changed, 19 insertions, 5 deletions
diff --git a/host/lib/usrp/dboard/db_rfx.cpp b/host/lib/usrp/dboard/db_rfx.cpp index 32aa3fe04..cf3b29ddc 100644 --- a/host/lib/usrp/dboard/db_rfx.cpp +++ b/host/lib/usrp/dboard/db_rfx.cpp @@ -1,5 +1,5 @@ // -// Copyright 2010-2011 Ettus Research LLC +// Copyright 2010-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -174,7 +174,14 @@ rfx_xcvr::rfx_xcvr( //////////////////////////////////////////////////////////////////// // Register RX properties //////////////////////////////////////////////////////////////////// - this->get_rx_subtree()->create<std::string>("name").set("RFX RX"); + if(get_rx_id() == 0x0024) this->get_rx_subtree()->create<std::string>("name").set("RFX400 RX"); + else if(get_rx_id() == 0x0025) this->get_rx_subtree()->create<std::string>("name").set("RFX900 RX"); + else if(get_rx_id() == 0x0034) this->get_rx_subtree()->create<std::string>("name").set("RFX1800 RX"); + else if(get_rx_id() == 0x0026) this->get_rx_subtree()->create<std::string>("name").set("RFX1200 RX"); + else if(get_rx_id() == 0x002c) this->get_rx_subtree()->create<std::string>("name").set("RFX2200 RX"); + else if(get_rx_id() == 0x0027) this->get_rx_subtree()->create<std::string>("name").set("RFX2400 RX"); + else this->get_rx_subtree()->create<std::string>("name").set("RFX RX"); + this->get_rx_subtree()->create<sensor_value_t>("sensors/lo_locked") .publish(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_RX)); BOOST_FOREACH(const std::string &name, _rx_gain_ranges.keys()){ @@ -203,7 +210,14 @@ rfx_xcvr::rfx_xcvr( //////////////////////////////////////////////////////////////////// // Register TX properties //////////////////////////////////////////////////////////////////// - this->get_tx_subtree()->create<std::string>("name").set("RFX TX"); + if(get_tx_id() == 0x0028) this->get_tx_subtree()->create<std::string>("name").set("RFX400 TX"); + else if(get_tx_id() == 0x0029) this->get_tx_subtree()->create<std::string>("name").set("RFX900 TX"); + else if(get_tx_id() == 0x0035) this->get_tx_subtree()->create<std::string>("name").set("RFX1800 TX"); + else if(get_tx_id() == 0x002a) this->get_tx_subtree()->create<std::string>("name").set("RFX1200 TX"); + else if(get_tx_id() == 0x002d) this->get_tx_subtree()->create<std::string>("name").set("RFX2200 TX"); + else if(get_tx_id() == 0x002b) this->get_tx_subtree()->create<std::string>("name").set("RFX2400 TX"); + else this->get_tx_subtree()->create<std::string>("name").set("RFX TX"); + this->get_tx_subtree()->create<sensor_value_t>("sensors/lo_locked") .publish(boost::bind(&rfx_xcvr::get_locked, this, dboard_iface::UNIT_TX)); this->get_tx_subtree()->create<int>("gains"); //phony property so this dir exists @@ -258,7 +272,7 @@ void rfx_xcvr::set_rx_ant(const std::string &ant){ //set the rx atr regs that change with antenna setting if (ant == "CAL") { - this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_DIS); + this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_TX_ONLY, _power_up | ANT_TXRX | MIXER_ENB); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_FULL_DUPLEX, _power_up | ANT_TXRX | MIXER_ENB); this->get_iface()->set_atr_reg(dboard_iface::UNIT_RX, dboard_iface::ATR_REG_RX_ONLY, _power_up | MIXER_ENB | ANT_TXRX ); } @@ -358,7 +372,7 @@ double rfx_xcvr::set_lo_freq( * The goal here to to loop though possible R dividers, * band select clock dividers, and prescaler values. * Calculate the A and B counters for each set of values. - * The loop exists when it meets all of the constraints. + * The loop exits when it meets all of the constraints. * The resulting loop values are loaded into the registers. * * fvco = [P*B + A] * fref/R |