diff options
Diffstat (limited to 'host/lib/usrp/b200/b200_impl.cpp')
| -rw-r--r-- | host/lib/usrp/b200/b200_impl.cpp | 108 |
1 files changed, 85 insertions, 23 deletions
diff --git a/host/lib/usrp/b200/b200_impl.cpp b/host/lib/usrp/b200/b200_impl.cpp index 355d12d12..f07b7fc6f 100644 --- a/host/lib/usrp/b200/b200_impl.cpp +++ b/host/lib/usrp/b200/b200_impl.cpp @@ -88,14 +88,16 @@ static device_addrs_t b200_find(const device_addr_t &hint) //since an address and resource is intended for a different, non-USB, device. if (hint.has_key("addr") || hint.has_key("resource")) return b200_addrs; - boost::uint16_t vid, pid; + size_t found = 0; + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list;//vid pid pair search list for devices. if(hint.has_key("vid") && hint.has_key("pid") && hint.has_key("type") && hint["type"] == "b200") { - vid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")); - pid = uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("vid")), + uhd::cast::hexstr_cast<boost::uint16_t>(hint.get("pid")))); } else { - vid = B200_VENDOR_ID; - pid = B200_PRODUCT_ID; + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID, B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID, B210_PRODUCT_NI_ID)); } // Important note: @@ -105,8 +107,9 @@ static device_addrs_t b200_find(const device_addr_t &hint) // This requirement is a courtesy of libusb1.0 on windows. //find the usrps and load firmware - size_t found = 0; - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + std::vector<usb_device_handle::sptr> uhd_usb_device_vector = usb_device_handle::get_device_list(vid_pid_pair_list); + + BOOST_FOREACH(usb_device_handle::sptr handle, uhd_usb_device_vector) { //extract the firmware path for the b200 std::string b200_fw_image; try{ @@ -137,7 +140,7 @@ static device_addrs_t b200_find(const device_addr_t &hint) //search for the device until found or timeout while (boost::get_system_time() < timeout_time and b200_addrs.empty() and found != 0) { - BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid_pid_pair_list)) { usb_control::sptr control; try{control = usb_control::make(handle, 0);} @@ -154,12 +157,16 @@ static device_addrs_t b200_find(const device_addr_t &hint) { switch (boost::lexical_cast<boost::uint16_t>(mb_eeprom["product"])) { + //0x0001 and 0x7737 are Ettus B200 product Ids. case 0x0001: case 0x7737: + case B200_PRODUCT_NI_ID: new_addr["product"] = "B200"; break; - case 0x7738: + //0x0002 and 0x7738 are Ettus B210 product Ids. case 0x0002: + case 0x7738: + case B210_PRODUCT_NI_ID: new_addr["product"] = "B210"; break; default: UHD_MSG(error) << "B200 unknown product code: " << mb_eeprom["product"] << std::endl; @@ -203,13 +210,50 @@ b200_impl::b200_impl(const device_addr_t &device_addr) //try to match the given device address with something on the USB bus boost::uint16_t vid = B200_VENDOR_ID; boost::uint16_t pid = B200_PRODUCT_ID; + bool specified_vid = false; + bool specified_pid = false; + if (device_addr.has_key("vid")) + { vid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("vid")); + specified_vid = true; + } + if (device_addr.has_key("pid")) + { pid = uhd::cast::hexstr_cast<boost::uint16_t>(device_addr.get("pid")); + specified_pid = true; + } - std::vector<usb_device_handle::sptr> device_list = - usb_device_handle::get_device_list(vid, pid); + std::vector<usb_device_handle::vid_pid_pair_t> vid_pid_pair_list;//search list for devices. + + // Search only for specified VID and PID if both specified + if (specified_vid && specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,pid)); + } + // Search for all supported PIDs limited to specified VID if only VID specified + else if (specified_vid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(vid,B210_PRODUCT_NI_ID)); + } + // Search for all supported VIDs limited to specified PID if only PID specified + else if (specified_pid) + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,pid)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,pid)); + } + // Search for all supported devices if neither VID nor PID specified + else + { + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_ID,B200_PRODUCT_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B200_PRODUCT_NI_ID)); + vid_pid_pair_list.push_back(usb_device_handle::vid_pid_pair_t(B200_VENDOR_NI_ID,B210_PRODUCT_NI_ID)); + } + + std::vector<usb_device_handle::sptr> device_list = usb_device_handle::get_device_list(vid_pid_pair_list); //locate the matching handle in the device list usb_device_handle::sptr handle; @@ -243,13 +287,17 @@ b200_impl::b200_impl(const device_addr_t &device_addr) { switch (boost::lexical_cast<boost::uint16_t>(mb_eeprom["product"])) { + //0x0001 and 0x7737 are Ettus B200 product Ids. case 0x0001: case 0x7737: + case B200_PRODUCT_NI_ID: product_name = "B200"; default_file_name = B200_FPGA_FILE_NAME; break; - case 0x7738: + //0x0002 and 0x7738 are Ettus B210 product Ids. case 0x0002: + case 0x7738: + case B210_PRODUCT_NI_ID: product_name = "B210"; default_file_name = B210_FPGA_FILE_NAME; break; @@ -415,6 +463,7 @@ b200_impl::b200_impl(const device_addr_t &device_addr) .publish(boost::bind(&b200_impl::get_tick_rate, this)) .subscribe(boost::bind(&b200_impl::update_tick_rate, this, _1)); _tree->create<time_spec_t>(mb_path / "time" / "cmd"); + _tree->create<bool>(mb_path / "auto_tick_rate").set(false); //////////////////////////////////////////////////////////////////// // and do the misc mboard sensors @@ -515,6 +564,11 @@ b200_impl::b200_impl(const device_addr_t &device_addr) _tree->access<double>(mb_path / "rx_dsps" / str(boost::format("%u") % i)/ "rate/value").set(B200_DEFAULT_RATE); _tree->access<double>(mb_path / "tx_dsps" / str(boost::format("%u") % i) / "rate/value").set(B200_DEFAULT_RATE); } + // We can automatically choose a master clock rate, but not if the user specifies one + _tree->access<bool>(mb_path / "auto_tick_rate").set(not device_addr.has_key("master_clock_rate")); + if (not device_addr.has_key("master_clock_rate")) { + UHD_MSG(status) << "Setting master clock rate selection to 'automatic'." << std::endl; + } //GPS installed: use external ref, time, and init time spec if (_gps and _gps->gps_detected()) @@ -578,7 +632,7 @@ void b200_impl::setup_radio(const size_t dspno) _tree->create<meta_range_t>(rx_dsp_path / "rate" / "range") .publish(boost::bind(&rx_dsp_core_3000::get_host_rates, perif.ddc)); _tree->create<double>(rx_dsp_path / "rate" / "value") - .coerce(boost::bind(&rx_dsp_core_3000::set_host_rate, perif.ddc, _1)) + .coerce(boost::bind(&b200_impl::coerce_rx_samp_rate, this, perif.ddc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_rx_samp_rate, this, dspno, _1)) .set(0.0); // Can only set this after tick rate is initialized. _tree->create<double>(rx_dsp_path / "freq" / "value") @@ -602,7 +656,7 @@ void b200_impl::setup_radio(const size_t dspno) _tree->create<meta_range_t>(tx_dsp_path / "rate" / "range") .publish(boost::bind(&tx_dsp_core_3000::get_host_rates, perif.duc)); _tree->create<double>(tx_dsp_path / "rate" / "value") - .coerce(boost::bind(&tx_dsp_core_3000::set_host_rate, perif.duc, _1)) + .coerce(boost::bind(&b200_impl::coerce_tx_samp_rate, this, perif.duc, dspno, _1)) .subscribe(boost::bind(&b200_impl::update_tx_samp_rate, this, dspno, _1)) .set(0.0); // Can only set this after tick rate is initialized. _tree->create<double>(tx_dsp_path / "freq" / "value") @@ -655,6 +709,8 @@ void b200_impl::setup_radio(const size_t dspno) .set(B200_DEFAULT_FREQ); _tree->create<meta_range_t>(rf_fe_path / "freq" / "range") .publish(boost::bind(&ad9361_ctrl::get_rf_freq_range)); + _tree->create<sensor_value_t>(rf_fe_path / "sensors" / "temp") + .publish(boost::bind(&ad9361_ctrl::get_temperature, _codec_ctrl)); //setup RX related stuff if (key[0] == 'R') @@ -722,7 +778,7 @@ void b200_impl::codec_loopback_self_test(wb_iface::sptr iface) /*********************************************************************** * Sample and tick rate comprehension below **********************************************************************/ -void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const char* direction /*= NULL*/) +void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, const std::string &direction /*= ""*/) { const size_t max_chans = 2; if (chan_count > max_chans) @@ -730,7 +786,7 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co throw uhd::value_error(boost::str( boost::format("cannot not setup %d %s channels (maximum is %d)") % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) % max_chans )); } @@ -744,20 +800,26 @@ void b200_impl::enforce_tick_rate_limits(size_t chan_count, double tick_rate, co % (tick_rate/1e6) % (max_tick_rate/1e6) % chan_count - % (direction ? direction : "data") + % (direction.empty() ? "data" : direction) )); } } } -double b200_impl::set_tick_rate(const double rate) +double b200_impl::set_tick_rate(const double new_tick_rate) { - UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz\n") % (rate/1e6)); - - check_tick_rate_with_current_streamers(rate); // Defined in b200_io_impl.cpp + UHD_MSG(status) << (boost::format("Asking for clock rate %.6f MHz... ") % (new_tick_rate/1e6)) << std::flush; + check_tick_rate_with_current_streamers(new_tick_rate); // Defined in b200_io_impl.cpp + + // Make sure the clock rate is actually changed before doing + // the full Monty of setting regs and loopback tests etc. + if (std::abs(new_tick_rate - _tick_rate) < 1.0) { + UHD_MSG(status) << "OK" << std::endl; + return _tick_rate; + } - _tick_rate = _codec_ctrl->set_clock_rate(rate); - UHD_MSG(status) << (boost::format("Actually got clock rate %.6f MHz\n") % (_tick_rate/1e6)); + _tick_rate = _codec_ctrl->set_clock_rate(new_tick_rate); + UHD_MSG(status) << std::endl << (boost::format("Actually got clock rate %.6f MHz.") % (_tick_rate/1e6)) << std::endl; //reset after clock rate change this->reset_codec_dcm(); |