diff options
Diffstat (limited to 'host/lib/usrp/b100')
| -rw-r--r-- | host/lib/usrp/b100/CMakeLists.txt | 47 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_ctrl.cpp | 245 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_ctrl.hpp | 69 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_iface.cpp | 336 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_iface.hpp | 73 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_impl.cpp | 280 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_impl.hpp | 204 | ||||
| -rw-r--r-- | host/lib/usrp/b100/b100_regs.hpp | 264 | ||||
| -rw-r--r-- | host/lib/usrp/b100/clock_ctrl.cpp | 525 | ||||
| -rw-r--r-- | host/lib/usrp/b100/clock_ctrl.hpp | 118 | ||||
| -rw-r--r-- | host/lib/usrp/b100/codec_ctrl.cpp | 283 | ||||
| -rw-r--r-- | host/lib/usrp/b100/codec_ctrl.hpp | 90 | ||||
| -rw-r--r-- | host/lib/usrp/b100/codec_impl.cpp | 149 | ||||
| -rw-r--r-- | host/lib/usrp/b100/ctrl_packet.hpp | 75 | ||||
| -rw-r--r-- | host/lib/usrp/b100/dboard_iface.cpp | 298 | ||||
| -rw-r--r-- | host/lib/usrp/b100/dboard_impl.cpp | 185 | ||||
| -rw-r--r-- | host/lib/usrp/b100/dsp_impl.cpp | 189 | ||||
| -rw-r--r-- | host/lib/usrp/b100/io_impl.cpp | 210 | ||||
| -rw-r--r-- | host/lib/usrp/b100/mboard_impl.cpp | 246 |
19 files changed, 3886 insertions, 0 deletions
diff --git a/host/lib/usrp/b100/CMakeLists.txt b/host/lib/usrp/b100/CMakeLists.txt new file mode 100644 index 000000000..e1618a49c --- /dev/null +++ b/host/lib/usrp/b100/CMakeLists.txt @@ -0,0 +1,47 @@ +# +# Copyright 2010-2011 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# This file included, use CMake directory variables +######################################################################## + +######################################################################## +# Conditionally configure the B100 support +######################################################################## +LIBUHD_REGISTER_COMPONENT("B100" ENABLE_B100 ON "ENABLE_LIBUHD;ENABLE_USB" OFF) + +IF(ENABLE_B100) + LIBUHD_APPEND_SOURCES( + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/clock_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/codec_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/ctrl_packet.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dboard_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/dsp_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/io_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/mboard_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_ctrl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_ctrl.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_iface.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_iface.hpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_impl.cpp + ${CMAKE_CURRENT_SOURCE_DIR}/b100_impl.hpp + ) +ENDIF(ENABLE_B100) diff --git a/host/lib/usrp/b100/b100_ctrl.cpp b/host/lib/usrp/b100/b100_ctrl.cpp new file mode 100644 index 000000000..4d4520e1e --- /dev/null +++ b/host/lib/usrp/b100/b100_ctrl.cpp @@ -0,0 +1,245 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "../../transport/super_recv_packet_handler.hpp" +#include "b100_ctrl.hpp" +#include "b100_impl.hpp" +#include <uhd/transport/usb_zero_copy.hpp> +#include <uhd/transport/zero_copy.hpp> +#include <uhd/transport/vrt_if_packet.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/types/serial.hpp> +#include "ctrl_packet.hpp" +#include <boost/thread.hpp> +#include <uhd/exception.hpp> + +using namespace uhd::transport; +using namespace uhd; + +bool b100_ctrl_debug = false; + +class b100_ctrl_impl : public b100_ctrl { +public: + b100_ctrl_impl(uhd::transport::usb_zero_copy::sptr ctrl_transport) : + sync_ctrl_fifo(2), + async_msg_fifo(100), + _ctrl_transport(ctrl_transport), + _seq(0) + { + boost::barrier spawn_barrier(2); + viking_marauders.create_thread(boost::bind(&b100_ctrl_impl::viking_marauder_loop, this, boost::ref(spawn_barrier))); + spawn_barrier.wait(); + } + + int write(boost::uint32_t addr, const ctrl_data_t &data); + ctrl_data_t read(boost::uint32_t addr, size_t len); + + ~b100_ctrl_impl(void) { + bbl_out_marauding = false; + viking_marauders.interrupt_all(); + viking_marauders.join_all(); + } + + bool get_ctrl_data(ctrl_data_t &pkt_data, double timeout); + bool recv_async_msg(uhd::async_metadata_t &async_metadata, double timeout); + +private: + int send_pkt(boost::uint16_t *cmd); + + //änd hërë wë gö ä-Vïkïng för äsynchronous control packets + void viking_marauder_loop(boost::barrier &); + bounded_buffer<ctrl_data_t> sync_ctrl_fifo; + bounded_buffer<async_metadata_t> async_msg_fifo; + boost::thread_group viking_marauders; + bool bbl_out_marauding; + + uhd::transport::usb_zero_copy::sptr _ctrl_transport; + boost::uint8_t _seq; +}; + +/*********************************************************************** + * helper functions for packing/unpacking control packets + **********************************************************************/ +void pack_ctrl_pkt(boost::uint16_t *pkt_buff, + const ctrl_pkt_t &pkt){ + //first two bits are OP + //next six bits are CALLBACKS + //next 8 bits are SEQUENCE + //next 16 bits are LENGTH (16-bit word) + //next 32 bits are ADDRESS (16-bit word LSW) + //then DATA (28 16-bit words) + pkt_buff[0] = (boost::uint16_t(pkt.pkt_meta.op) << 14) | (boost::uint16_t(pkt.pkt_meta.callbacks) << 8) | pkt.pkt_meta.seq; + pkt_buff[1] = pkt.pkt_meta.len; + pkt_buff[2] = (pkt.pkt_meta.addr & 0x00000FFF); + pkt_buff[3] = 0x0000; //address high bits always 0 on this device + + for(size_t i = 0; i < pkt.data.size(); i++) { + pkt_buff[4+i] = pkt.data[i]; + } +} + +void unpack_ctrl_pkt(const boost::uint16_t *pkt_buff, + ctrl_pkt_t &pkt){ + pkt.pkt_meta.seq = pkt_buff[0] & 0xFF; + pkt.pkt_meta.op = CTRL_PKT_OP_READ; //really this is useless + pkt.pkt_meta.len = pkt_buff[1]; + pkt.pkt_meta.callbacks = 0; //callbacks aren't implemented yet + pkt.pkt_meta.addr = pkt_buff[2] | boost::uint32_t(pkt_buff[3] << 16); + + //let's check this so we don't go pushing 64K of crap onto the pkt + if(pkt.pkt_meta.len > CTRL_PACKET_DATA_LENGTH) { + throw uhd::runtime_error("Received control packet too long"); + } + + for(int i = 4; i < 4+pkt.pkt_meta.len; i++) pkt.data.push_back(pkt_buff[i]); +} + +int b100_ctrl_impl::send_pkt(boost::uint16_t *cmd) { + managed_send_buffer::sptr sbuf = _ctrl_transport->get_send_buff(); + if(!sbuf.get()) { + throw uhd::runtime_error("Control channel send error"); + } + + //FIXME there's a better way to do this + for(size_t i = 0; i < (CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)); i++) { + sbuf->cast<boost::uint16_t *>()[i] = cmd[i]; + } + sbuf->commit(CTRL_PACKET_LENGTH); //fixed size transaction + return 0; +} + +int b100_ctrl_impl::write(boost::uint32_t addr, const ctrl_data_t &data) { + UHD_ASSERT_THROW(data.size() <= (CTRL_PACKET_DATA_LENGTH / sizeof(boost::uint16_t))); + ctrl_pkt_t pkt; + pkt.data = data; + pkt.pkt_meta.op = CTRL_PKT_OP_WRITE; + pkt.pkt_meta.callbacks = 0; + pkt.pkt_meta.seq = _seq++; + pkt.pkt_meta.len = pkt.data.size(); + pkt.pkt_meta.addr = addr; + boost::uint16_t pkt_buff[CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)]; + + pack_ctrl_pkt(pkt_buff, pkt); + size_t result = send_pkt(pkt_buff); + return result; +} + +ctrl_data_t b100_ctrl_impl::read(boost::uint32_t addr, size_t len) { + UHD_ASSERT_THROW(len <= (CTRL_PACKET_DATA_LENGTH / sizeof(boost::uint16_t))); + + ctrl_pkt_t pkt; + pkt.pkt_meta.op = CTRL_PKT_OP_READ; + pkt.pkt_meta.callbacks = 0; + pkt.pkt_meta.seq = _seq++; + pkt.pkt_meta.len = len; + pkt.pkt_meta.addr = addr; + boost::uint16_t pkt_buff[CTRL_PACKET_LENGTH / sizeof(boost::uint16_t)]; + + pack_ctrl_pkt(pkt_buff, pkt); + send_pkt(pkt_buff); + + //loop around waiting for the response to appear + while(!get_ctrl_data(pkt.data, 0.05)); + + return pkt.data; +} + +/*********************************************************************** + * Viking marauders go pillaging for asynchronous control packets in the + * control response endpoint. Sync packets go in sync_ctrl_fifo, + * async TX error messages go in async_msg_fifo. sync_ctrl_fifo should + * never have more than 1 message in it, since it's expected that we'll + * wait for a control operation to finish before starting another one. + **********************************************************************/ +void b100_ctrl_impl::viking_marauder_loop(boost::barrier &spawn_barrier) { + bbl_out_marauding = true; + spawn_barrier.wait(); + set_thread_priority_safe(); + + while(bbl_out_marauding){ + managed_recv_buffer::sptr rbuf = _ctrl_transport->get_recv_buff(); + if(!rbuf.get()) continue; //that's ok, there are plenty of villages to pillage! + const boost::uint16_t *pkt_buf = rbuf->cast<const boost::uint16_t *>(); + + if(pkt_buf[0] >> 8 == CTRL_PACKET_HEADER_MAGIC) { + //so it's got a control packet header, let's parse it. + ctrl_pkt_t pkt; + unpack_ctrl_pkt(pkt_buf, pkt); + + if(pkt.pkt_meta.seq != boost::uint8_t(_seq - 1)) { + throw uhd::runtime_error("Sequence error on control channel"); + } + if(pkt.pkt_meta.len > (CTRL_PACKET_LENGTH - CTRL_PACKET_HEADER_LENGTH)) { + throw uhd::runtime_error("Control channel packet length too long"); + } + + //push it onto the queue + sync_ctrl_fifo.push_with_wait(pkt.data); + } else { //it's an async status pkt + //extract the vrt header packet info + vrt::if_packet_info_t if_packet_info; + if_packet_info.num_packet_words32 = rbuf->size()/sizeof(boost::uint32_t); + const boost::uint32_t *vrt_hdr = rbuf->cast<const boost::uint32_t *>(); + vrt::if_hdr_unpack_le(vrt_hdr, if_packet_info); + + if( if_packet_info.sid == 0 + and if_packet_info.packet_type != vrt::if_packet_info_t::PACKET_TYPE_DATA){ + //fill in the async metadata + async_metadata_t metadata; + metadata.channel = 0; + metadata.has_time_spec = if_packet_info.has_tsi and if_packet_info.has_tsf; + metadata.time_spec = time_spec_t( + time_t(if_packet_info.tsi), size_t(if_packet_info.tsf), 64e6 //FIXME get from clock_ctrl + ); + metadata.event_code = async_metadata_t::event_code_t(sph::get_context_code(vrt_hdr, if_packet_info)); + //print the famous U, and push the metadata into the message queue + if (metadata.event_code & + ( async_metadata_t::EVENT_CODE_UNDERFLOW + | async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET) ) + UHD_MSG(fastpath) << "U"; + + if (metadata.event_code & + ( async_metadata_t::EVENT_CODE_SEQ_ERROR + | async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST) ) + UHD_MSG(fastpath) << "S"; + + async_msg_fifo.push_with_pop_on_full(metadata); + continue; + } + throw uhd::runtime_error("Control: unknown async response"); + } + } +} + +bool b100_ctrl_impl::get_ctrl_data(ctrl_data_t &pkt_data, double timeout){ + boost::this_thread::disable_interruption di; //disable because the wait can throw + return sync_ctrl_fifo.pop_with_timed_wait(pkt_data, timeout); +} + +bool b100_ctrl_impl::recv_async_msg(uhd::async_metadata_t &async_metadata, double timeout) { + boost::this_thread::disable_interruption di; //disable because the wait can throw + return async_msg_fifo.pop_with_timed_wait(async_metadata, timeout); +} + +/*********************************************************************** + * Public make function for b100_ctrl interface + **********************************************************************/ +b100_ctrl::sptr b100_ctrl::make(uhd::transport::usb_zero_copy::sptr ctrl_transport){ + return sptr(new b100_ctrl_impl(ctrl_transport)); +} diff --git a/host/lib/usrp/b100/b100_ctrl.hpp b/host/lib/usrp/b100/b100_ctrl.hpp new file mode 100644 index 000000000..ae706dbb4 --- /dev/null +++ b/host/lib/usrp/b100/b100_ctrl.hpp @@ -0,0 +1,69 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_B100_CTRL_HPP +#define INCLUDED_B100_CTRL_HPP + +#include <uhd/transport/bounded_buffer.hpp> +#include <uhd/transport/usb_zero_copy.hpp> +#include <uhd/types/metadata.hpp> +#include <uhd/types/serial.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include "ctrl_packet.hpp" +#include <boost/thread.hpp> + +class b100_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<b100_ctrl> sptr; + + /*! + * Make a USRP control object from a data transport + * \param ctrl_transport a USB data transport + * \return a new b100 control object + */ + static sptr make(uhd::transport::usb_zero_copy::sptr ctrl_transport); + + /*! + * Write a byte vector to an FPGA register + * \param addr the FPGA register address + * \param bytes the data to write + * \return 0 on success, error code on failure + */ + virtual int write(boost::uint32_t addr, const ctrl_data_t &data) = 0; + + /*! + * Read a byte vector from an FPGA register (blocking read) + * \param addr the FPGA register address + * \param len the length of the read + * \return a vector of bytes from the register(s) in question + */ + virtual ctrl_data_t read(boost::uint32_t addr, size_t len) = 0; + + /*! + * Get a sync ctrl packet (blocking) + * \param the packet data buffer + * \param the timeout value + * \return true if it got something + */ + virtual bool get_ctrl_data(ctrl_data_t &pkt_data, double timeout) = 0; + + virtual bool recv_async_msg(uhd::async_metadata_t &async_metadata, double timeout) = 0; + +}; + +#endif /* INCLUDED_B100_CTRL_HPP */ diff --git a/host/lib/usrp/b100/b100_iface.cpp b/host/lib/usrp/b100/b100_iface.cpp new file mode 100644 index 000000000..17ea2e6ad --- /dev/null +++ b/host/lib/usrp/b100/b100_iface.cpp @@ -0,0 +1,336 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_iface.hpp" +#include "usrp_commands.h" +#include <uhd/exception.hpp> +#include <uhd/utils/byteswap.hpp> +#include <uhd/utils/safe_call.hpp> +#include <uhd/utils/msg.hpp> +#include <boost/format.hpp> +#include <iomanip> +#include <iostream> + +//FOR TESTING ONLY +#include "b100_regs.hpp" +#include <boost/thread/thread.hpp> +#include "usrp_i2c_addr.h" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const bool iface_debug = true; +static const boost::uint16_t USRP_B_FW_COMPAT_NUM = 0x02; +static const boost::uint16_t USRP_B_FPGA_COMPAT_NUM = 0x03; + +/*********************************************************************** + * I2C + FX2 implementation wrapper + **********************************************************************/ +class b100_i2c_fx2_iface : public i2c_iface{ +public: + b100_i2c_fx2_iface(uhd::usrp::fx2_ctrl::sptr fx2_ctrl){ + _fx2_ctrl = fx2_ctrl; + } + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes) + { + UHD_ASSERT_THROW(bytes.size() < max_i2c_data_bytes); + + unsigned char buff[max_i2c_data_bytes]; + std::copy(bytes.begin(), bytes.end(), buff); + + int ret = _fx2_ctrl->usrp_i2c_write(addr & 0xff, + buff, + bytes.size()); + + if (iface_debug && (ret < 0)) + uhd::runtime_error("USRP: failed i2c write"); + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes) + { + UHD_ASSERT_THROW(num_bytes < max_i2c_data_bytes); + + unsigned char buff[max_i2c_data_bytes]; + int ret = _fx2_ctrl->usrp_i2c_read(addr & 0xff, + buff, + num_bytes); + + if (iface_debug && ((ret < 0) || (unsigned)ret < (num_bytes))) + uhd::runtime_error("USRP: failed i2c read"); + + byte_vector_t out_bytes; + for (size_t i = 0; i < num_bytes; i++) + out_bytes.push_back(buff[i]); + + return out_bytes; + } + +private: + static const size_t max_i2c_data_bytes = 64; + uhd::usrp::fx2_ctrl::sptr _fx2_ctrl; +}; + +/*********************************************************************** + * USRP-E100 interface implementation + **********************************************************************/ +class b100_iface_impl : public b100_iface{ +public: + /******************************************************************* + * Structors + ******************************************************************/ + b100_iface_impl(uhd::usrp::fx2_ctrl::sptr fx2_ctrl, + b100_ctrl::sptr fpga_ctrl) : + _fx2_i2c_iface(fx2_ctrl), + _fx2_ctrl(fx2_ctrl), + _fpga_ctrl(fpga_ctrl) + { + this->check_fw_compat(); + if (fpga_ctrl.get() != NULL){ + enable_gpif(1); + i2c_init(); + this->check_fpga_compat(); + } + mb_eeprom = mboard_eeprom_t(get_fx2_i2c_iface(), mboard_eeprom_t::MAP_B000); + } + + void check_fw_compat(void){ + unsigned char data[4]; //useless data buffer + const boost::uint16_t fw_compat_num = _fx2_ctrl->usrp_control_read( + VRQ_FW_COMPAT, 0, 0, data, sizeof(data) + ); + if (fw_compat_num != USRP_B_FW_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected firmware compatibility number 0x%x, but got 0x%x:\n" + "The firmware build is not compatible with the host code build." + ) % USRP_B_FW_COMPAT_NUM % fw_compat_num)); + } + } + + void check_fpga_compat(void){ + const boost::uint16_t fpga_compat_num = this->peek16(B100_REG_MISC_COMPAT); + if (fpga_compat_num != USRP_B_FPGA_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected FPGA compatibility number 0x%x, but got 0x%x:\n" + "The FPGA build is not compatible with the host code build." + ) % USRP_B_FPGA_COMPAT_NUM % fpga_compat_num)); + } + } + + ~b100_iface_impl(void) + { + /* NOP */ + } + + /******************************************************************* + * Peek and Poke + ******************************************************************/ + + void poke(boost::uint32_t addr, const ctrl_data_t &data) { + boost::mutex::scoped_lock lock(_ctrl_mutex); + _fpga_ctrl->write(addr, data); + } + + ctrl_data_t peek(boost::uint32_t addr, size_t len) { + boost::mutex::scoped_lock lock(_ctrl_mutex); + return _fpga_ctrl->read(addr, len); + } + + void poke16(boost::uint32_t addr, boost::uint16_t value) + { + ctrl_data_t words(1); + words[0] = value; + poke(addr, words); + } + + void poke32(boost::uint32_t addr, boost::uint32_t value) + { + //just a subset of poke() to maintain compatibility + ctrl_data_t words(2); + words[0] = value & 0x0000FFFF; + words[1] = value >> 16; + poke(addr, words); + } + + boost::uint32_t peek32(boost::uint32_t addr) + { + ctrl_data_t words = peek(addr, 2); + return boost::uint32_t((boost::uint32_t(words[1]) << 16) | words[0]); + } + + boost::uint16_t peek16(boost::uint32_t addr) + { + ctrl_data_t words = peek(addr, 1); + return boost::uint16_t(words[0]); + } + + /******************************************************************* + * I2C + ******************************************************************/ + static const boost::uint32_t i2c_datarate = 400000; + static const boost::uint32_t wishbone_clk = 64000000; //FIXME should go somewhere else + + void i2c_init(void) { + //init I2C FPGA interface. + poke16(B100_REG_I2C_CTRL, 0x0000); + //set prescalers to operate at 400kHz: WB_CLK is 64MHz... + boost::uint16_t prescaler = wishbone_clk / (i2c_datarate*5) - 1; + poke16(B100_REG_I2C_PRESCALER_LO, prescaler & 0xFF); + poke16(B100_REG_I2C_PRESCALER_HI, (prescaler >> 8) & 0xFF); + poke16(B100_REG_I2C_CTRL, I2C_CTRL_EN); //enable I2C core + } + + static const size_t max_i2c_data_bytes = 64; + + void i2c_wait_for_xfer(void) + { + while(this->peek16(B100_REG_I2C_CMD_STATUS) & I2C_ST_TIP) + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + } + + bool wait_chk_ack(void) { + i2c_wait_for_xfer(); + return (this->peek16(B100_REG_I2C_CMD_STATUS) & I2C_ST_RXACK) == 0; + } + + void write_i2c(boost::uint8_t addr, const byte_vector_t &bytes) + { + poke16(B100_REG_I2C_DATA, (addr << 1) | 0); //addr and read bit (0) + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_WR | I2C_CMD_START | (bytes.size() == 0 ? I2C_CMD_STOP : 0)); + + //wait for previous transfer to complete + if(!wait_chk_ack()) { + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_STOP); + return; + } + + for(size_t i = 0; i < bytes.size(); i++) { + poke16(B100_REG_I2C_DATA, bytes[i]); + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_WR | ((i == (bytes.size() - 1)) ? I2C_CMD_STOP : 0)); + if(!wait_chk_ack()) { + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_STOP); + return; + } + } + } + + byte_vector_t read_i2c(boost::uint8_t addr, size_t num_bytes) + { + byte_vector_t bytes; + if(num_bytes == 0) return bytes; + + while (peek16(B100_REG_I2C_CMD_STATUS) & I2C_ST_BUSY); + + poke16(B100_REG_I2C_DATA, (addr << 1) | 1); //addr and read bit (1) + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_WR | I2C_CMD_START); + //wait for previous transfer to complete + if(!wait_chk_ack()) { + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_STOP); + } + + for(; num_bytes > 0; num_bytes--) { + poke16(B100_REG_I2C_CMD_STATUS, I2C_CMD_RD | ((num_bytes == 1) ? (I2C_CMD_STOP | I2C_CMD_NACK) : 0)); + i2c_wait_for_xfer(); + boost::uint8_t readback = peek16(B100_REG_I2C_DATA) & 0xFF; + bytes.push_back(readback); + } + return bytes; + } + + i2c_iface &get_fx2_i2c_iface(void){ + return _fx2_i2c_iface; + } + + /******************************************************************* + * SPI interface + * Eventually this will be replaced with a control-channel system + * to let the firmware do the actual write/readback cycles. + * This keeps the bandwidth on the control channel down. + ******************************************************************/ + + void spi_wait(void) { + while(peek32(B100_REG_SPI_CTRL) & SPI_CTRL_GO_BSY); + } + + boost::uint32_t transact_spi(int which_slave, + const spi_config_t &config, + boost::uint32_t bits, + size_t num_bits, + bool readback) + { + UHD_ASSERT_THROW((num_bits <= 32) && !(num_bits % 8)); + + int edge_flags = ((config.miso_edge==spi_config_t::EDGE_FALL) ? SPI_CTRL_RXNEG : 0) | + ((config.mosi_edge==spi_config_t::EDGE_FALL) ? 0 : SPI_CTRL_TXNEG) + ; + + boost::uint16_t ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & num_bits) | edge_flags; + + poke16(B100_REG_SPI_DIV, 0x0001); // = fpga_clk / 4 + poke32(B100_REG_SPI_SS, which_slave & 0xFFFF); + poke32(B100_REG_SPI_TXRX0, bits); + poke16(B100_REG_SPI_CTRL, ctrl); + + poke16(B100_REG_SPI_CTRL, ctrl | SPI_CTRL_GO_BSY); + if(readback) { + spi_wait(); + return peek32(B100_REG_SPI_TXRX0); + } + else { + return 0; + } + } + + void reset_gpif(boost::uint16_t ep) { + _fx2_ctrl->usrp_control_write(VRQ_RESET_GPIF, ep, ep, 0, 0); + } + + void enable_gpif(bool en) { + _fx2_ctrl->usrp_control_write(VRQ_ENABLE_GPIF, en ? 1 : 0, 0, 0, 0); + } + + void clear_fpga_fifo(void) { + _fx2_ctrl->usrp_control_write(VRQ_CLEAR_FPGA_FIFO, 0, 0, 0, 0); + } + + void write_uart(boost::uint8_t, const std::string &) { + throw uhd::not_implemented_error("Unhandled command write_uart()"); + } + + std::string read_uart(boost::uint8_t) { + throw uhd::not_implemented_error("Unhandled command read_uart()"); + } + +private: + b100_i2c_fx2_iface _fx2_i2c_iface; + uhd::usrp::fx2_ctrl::sptr _fx2_ctrl; + b100_ctrl::sptr _fpga_ctrl; + boost::mutex _ctrl_mutex; +}; + +/*********************************************************************** + * Public Make Function + **********************************************************************/ +b100_iface::sptr b100_iface::make(uhd::usrp::fx2_ctrl::sptr fx2_ctrl, + b100_ctrl::sptr fpga_ctrl) +{ + return b100_iface::sptr(new b100_iface_impl(fx2_ctrl, fpga_ctrl)); +} diff --git a/host/lib/usrp/b100/b100_iface.hpp b/host/lib/usrp/b100/b100_iface.hpp new file mode 100644 index 000000000..57ed6a45c --- /dev/null +++ b/host/lib/usrp/b100/b100_iface.hpp @@ -0,0 +1,73 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_B100_IFACE_HPP +#define INCLUDED_B100_IFACE_HPP + +#include <uhd/usrp/mboard_iface.hpp> +#include <uhd/usrp/mboard_eeprom.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <uhd/transport/usb_zero_copy.hpp> +#include "../fx2/fx2_ctrl.hpp" +#include "b100_ctrl.hpp" + +/*! + * The usrp1 interface class: + * Provides a set of functions to implementation layer. + * Including spi, peek, poke, control... + */ +class b100_iface : boost::noncopyable, public uhd::usrp::mboard_iface{ +public: + typedef boost::shared_ptr<b100_iface> sptr; + + /*! + * Make a new b100 interface with the control transport. + * \param fx2_ctrl the usrp control object + * \param fpga_ctrl the FPGA interface control object + * \return a new usrp1 interface object + */ + static sptr make(uhd::usrp::fx2_ctrl::sptr fx2_ctrl, + b100_ctrl::sptr fpga_ctrl = b100_ctrl::sptr() + ); + + /*! + * Reset the GPIF interface on the FX2 + * \param which endpoint to reset + * \return + */ + virtual void reset_gpif(boost::uint16_t ep) = 0; + + /*! + * Clear the GPIF FIFOs on the FPGA + * \return + */ + virtual void clear_fpga_fifo(void) = 0; + + /*! + * Enable/disable the GPIF interfaces on the FX2 + * \return + */ + virtual void enable_gpif(bool en) = 0; + + //! Get access to the FX2 I2C interface + virtual uhd::i2c_iface &get_fx2_i2c_iface(void) = 0; + + uhd::usrp::mboard_eeprom_t mb_eeprom; +}; + +#endif /* INCLUDED_USRP1_IFACE_HPP */ diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp new file mode 100644 index 000000000..7e733ddd9 --- /dev/null +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -0,0 +1,280 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include "b100_ctrl.hpp" +#include "fpga_regs_standard.h" +#include "usrp_spi_defs.h" +#include <uhd/transport/usb_control.hpp> +#include "ctrl_packet.hpp" +#include <uhd/usrp/device_props.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/images.hpp> +#include <uhd/utils/safe_call.hpp> +#include <boost/format.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/filesystem.hpp> +#include <boost/thread/thread.hpp> +#include <boost/lexical_cast.hpp> +#include "b100_regs.hpp" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +const boost::uint16_t B100_VENDOR_ID = 0x2500; +const boost::uint16_t B100_PRODUCT_ID = 0x0001; +const boost::uint16_t FX2_VENDOR_ID = 0x04b4; +const boost::uint16_t FX2_PRODUCT_ID = 0x8613; + +/*********************************************************************** + * Discovery + **********************************************************************/ +static device_addrs_t b100_find(const device_addr_t &hint) +{ + device_addrs_t b100_addrs; + + //return an empty list of addresses when type is set to non-b100 + if (hint.has_key("type") and hint["type"] != "b100") return b100_addrs; + + //Return an empty list of addresses when an address is specified, + //since an address is intended for a different, non-USB, device. + if (hint.has_key("addr")) return b100_addrs; + + boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : B100_VENDOR_ID; + boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : B100_PRODUCT_ID; + + // Important note: + // The get device list calls are nested inside the for loop. + // This allows the usb guts to decontruct when not in use, + // so that re-enumeration after fw load can occur successfully. + // This requirement is a courtesy of libusb1.0 on windows. + + //find the usrps and load firmware + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + //extract the firmware path for the b100 + std::string b100_fw_image; + try{ + b100_fw_image = find_image_path(hint.get("fw", "usrp_b100_fw.ihx")); + } + catch(...){ + UHD_MSG(warning) << boost::format( + "Could not locate B100 firmware.\n" + "Please install the images package.\n" + ); + return b100_addrs; + } + UHD_LOG << "the firmware image: " << b100_fw_image << std::endl; + + usb_control::sptr control; + try{control = usb_control::make(handle);} + catch(const uhd::exception &){continue;} //ignore claimed + + fx2_ctrl::make(control)->usrp_load_firmware(b100_fw_image); + } + + //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware + vid = B100_VENDOR_ID; + pid = B100_PRODUCT_ID; + + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + device_addr_t new_addr; + new_addr["type"] = "b100"; + + //Attempt to read the name from the EEPROM and perform filtering. + //This operation can throw due to compatibility mismatch. + try{ + usb_control::sptr control = usb_control::make(handle); + b100_iface::sptr iface = b100_iface::make(fx2_ctrl::make(control)); + new_addr["name"] = iface->mb_eeprom["name"]; + new_addr["serial"] = handle->get_serial(); + } + catch(const uhd::exception &){ + //set these values as empty string so the device may still be found + //and the filter's below can still operate on the discovered device + new_addr["name"] = ""; + new_addr["serial"] = ""; + } + + //this is a found b100 when the hint serial and name match or blank + if ( + (not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) + ){ + b100_addrs.push_back(new_addr); + } + } + + return b100_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr b100_make(const device_addr_t &device_addr){ + + //extract the FPGA path for the B100 + std::string b100_fpga_image = find_image_path( + device_addr.has_key("fpga")? device_addr["fpga"] : "usrp_b100_fpga.bin" + ); + + //try to match the given device address with something on the USB bus + std::vector<usb_device_handle::sptr> device_list = + usb_device_handle::get_device_list(B100_VENDOR_ID, B100_PRODUCT_ID); + + //locate the matching handle in the device list + usb_device_handle::sptr handle; + BOOST_FOREACH(usb_device_handle::sptr dev_handle, device_list) { + if (dev_handle->get_serial() == device_addr["serial"]){ + handle = dev_handle; + break; + } + } + UHD_ASSERT_THROW(handle.get() != NULL); //better be found + + //create control objects and a data transport + usb_control::sptr fx2_transport = usb_control::make(handle); + fx2_ctrl::sptr fx2_ctrl = fx2_ctrl::make(fx2_transport); + fx2_ctrl->usrp_load_fpga(b100_fpga_image); + + device_addr_t data_xport_args; + data_xport_args["recv_frame_size"] = device_addr.get("recv_frame_size", "16384"); + data_xport_args["num_recv_frames"] = device_addr.get("num_recv_frames", "16"); + data_xport_args["send_frame_size"] = device_addr.get("send_frame_size", "16384"); + data_xport_args["num_send_frames"] = device_addr.get("num_send_frames", "16"); + + usb_zero_copy::sptr data_transport = usb_zero_copy::make_wrapper( + usb_zero_copy::make( + handle, // identifier + 6, // IN endpoint + 2, // OUT endpoint + data_xport_args // param hints + ) + ); + + //create the control transport + device_addr_t ctrl_xport_args; + ctrl_xport_args["recv_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); + ctrl_xport_args["num_recv_frames"] = "16"; + ctrl_xport_args["send_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); + ctrl_xport_args["num_send_frames"] = "4"; + + usb_zero_copy::sptr ctrl_transport = usb_zero_copy::make( + handle, + 8, + 4, + ctrl_xport_args + ); + + const double master_clock_rate = device_addr.cast<double>("master_clock_rate", 64e6); + + + //create the b100 implementation guts + return device::sptr(new b100_impl(data_transport, ctrl_transport, fx2_ctrl, master_clock_rate)); +} + +UHD_STATIC_BLOCK(register_b100_device){ + device::register_device(&b100_find, &b100_make); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +b100_impl::b100_impl(uhd::transport::usb_zero_copy::sptr data_transport, + uhd::transport::usb_zero_copy::sptr ctrl_transport, + uhd::usrp::fx2_ctrl::sptr fx2_ctrl, + const double master_clock_rate) + : _data_transport(data_transport), _fx2_ctrl(fx2_ctrl) +{ + //this is the handler object for FPGA control packets + _fpga_ctrl = b100_ctrl::make(ctrl_transport); + + _iface = b100_iface::make(_fx2_ctrl, _fpga_ctrl); + + //create clock interface + _clock_ctrl = b100_clock_ctrl::make(_iface, master_clock_rate); + + //create codec interface + _codec_ctrl = b100_codec_ctrl::make(_iface); + + //initialize the codecs + codec_init(); + + //initialize the mboard + mboard_init(); + + //initialize the dboards + dboard_init(); + + //initialize the dsps + rx_ddc_init(); + + //initialize the dsps + tx_duc_init(); + + //init the subdev specs + this->mboard_set(MBOARD_PROP_RX_SUBDEV_SPEC, subdev_spec_t()); + this->mboard_set(MBOARD_PROP_TX_SUBDEV_SPEC, subdev_spec_t()); + + //initialize the send/recv buffs + io_init(); +} + +b100_impl::~b100_impl(void){ + /* NOP */ +} + +bool b100_impl::recv_async_msg(uhd::async_metadata_t &md, double timeout){ + return _fpga_ctrl->recv_async_msg(md, timeout); +} + +/*********************************************************************** + * Device Get + **********************************************************************/ +void b100_impl::get(const wax::obj &key_, wax::obj &val) +{ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<device_prop_t>()){ + case DEVICE_PROP_NAME: + val = std::string("USRP-B100 device"); + return; + + case DEVICE_PROP_MBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _mboard_proxy->get_link(); + return; + + case DEVICE_PROP_MBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Device Set + **********************************************************************/ +void b100_impl::set(const wax::obj &, const wax::obj &) +{ + UHD_THROW_PROP_SET_ERROR(); +} diff --git a/host/lib/usrp/b100/b100_impl.hpp b/host/lib/usrp/b100/b100_impl.hpp new file mode 100644 index 000000000..daec70bca --- /dev/null +++ b/host/lib/usrp/b100/b100_impl.hpp @@ -0,0 +1,204 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_iface.hpp" +#include "b100_ctrl.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/device.hpp> +#include <uhd/utils/pimpl.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/types/otw_type.hpp> +#include <uhd/types/clock_config.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/dboard_id.hpp> +#include <uhd/usrp/subdev_spec.hpp> +#include <uhd/usrp/dboard_eeprom.hpp> +#include <uhd/usrp/dboard_manager.hpp> +#include <uhd/transport/usb_zero_copy.hpp> + +#ifndef INCLUDED_B100_IMPL_HPP +#define INCLUDED_B100_IMPL_HPP + +/*! + * Make a b100 dboard interface. + * \param iface the b100 interface object + * \param clock the clock control interface + * \param codec the codec control interface + * \return a sptr to a new dboard interface + */ +uhd::usrp::dboard_iface::sptr make_b100_dboard_iface( + b100_iface::sptr iface, + b100_clock_ctrl::sptr clock, + b100_codec_ctrl::sptr codec +); + +/*! + * Simple wax obj proxy class: + * Provides a wax obj interface for a set and a get function. + * This allows us to create nested properties structures + * while maintaining flattened code within the implementation. + */ +class wax_obj_proxy : public wax::obj { +public: + typedef boost::function<void(const wax::obj &, wax::obj &)> get_t; + typedef boost::function<void(const wax::obj &, const wax::obj &)> set_t; + typedef boost::shared_ptr<wax_obj_proxy> sptr; + + static sptr make(const get_t &get, const set_t &set){ + return sptr(new wax_obj_proxy(get, set)); + } + +private: + get_t _get; set_t _set; + wax_obj_proxy(const get_t &get, const set_t &set): _get(get), _set(set) {}; + void get(const wax::obj &key, wax::obj &val) {return _get(key, val);} + void set(const wax::obj &key, const wax::obj &val) {return _set(key, val);} +}; + +/*! + * USRP1 implementation guts: + * The implementation details are encapsulated here. + * Handles properties on the mboard, dboard, dsps... + */ +class b100_impl : public uhd::device { +public: + //structors + b100_impl(uhd::transport::usb_zero_copy::sptr data_transport, + uhd::transport::usb_zero_copy::sptr ctrl_transport, + uhd::usrp::fx2_ctrl::sptr fx2_ctrl, + double master_clock_rate); + + ~b100_impl(void); + + //the io interface + size_t send(const send_buffs_type &, + size_t, + const uhd::tx_metadata_t &, + const uhd::io_type_t &, + send_mode_t, double); + + size_t recv(const recv_buffs_type &, + size_t, uhd::rx_metadata_t &, + const uhd::io_type_t &, + recv_mode_t, double); + + size_t get_max_send_samps_per_packet(void) const; + + size_t get_max_recv_samps_per_packet(void) const; + + bool recv_async_msg(uhd::async_metadata_t &, double); + +private: + //clock control + b100_clock_ctrl::sptr _clock_ctrl; + + //interface to ioctls and file descriptor + b100_iface::sptr _iface; + + //handle io stuff + uhd::transport::zero_copy_if::sptr _data_transport; + UHD_PIMPL_DECL(io_impl) _io_impl; + void update_transport_channel_mapping(void); + void io_init(void); + void issue_stream_cmd(const uhd::stream_cmd_t &stream_cmd); + void handle_overrun(size_t); + + //otw types + uhd::otw_type_t _recv_otw_type; + uhd::otw_type_t _send_otw_type; + + //configuration shadows + uhd::clock_config_t _clock_config; + uhd::usrp::subdev_spec_t _rx_subdev_spec, _tx_subdev_spec; + + //ad9862 codec control interface + b100_codec_ctrl::sptr _codec_ctrl; + + //codec properties interfaces + void codec_init(void); + void rx_codec_get(const wax::obj &, wax::obj &); + void rx_codec_set(const wax::obj &, const wax::obj &); + void tx_codec_get(const wax::obj &, wax::obj &); + void tx_codec_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_codec_proxy, _tx_codec_proxy; + + //device functions and settings + void get(const wax::obj &, wax::obj &); + void set(const wax::obj &, const wax::obj &); + + //mboard functions and settings + void mboard_init(void); + void mboard_get(const wax::obj &, wax::obj &); + void mboard_set(const wax::obj &, const wax::obj &); + void update_clock_config(void); + wax_obj_proxy::sptr _mboard_proxy; + + /*! + * Make a usrp1 dboard interface. + * \param iface the usrp1 interface object + * \param clock the clock control interface + * \param codec the codec control interface + * \param dboard_slot the slot identifier + * \param rx_dboard_id the db id for the rx board (used for evil dbsrx purposes) + * \return a sptr to a new dboard interface + */ + static uhd::usrp::dboard_iface::sptr make_dboard_iface( + b100_iface::sptr iface, + b100_clock_ctrl::sptr clock, + b100_codec_ctrl::sptr codec, + const uhd::usrp::dboard_id_t &rx_dboard_id + ); + + //xx dboard functions and settings + void dboard_init(void); + uhd::usrp::dboard_manager::sptr _dboard_manager; + uhd::usrp::dboard_iface::sptr _dboard_iface; + + //rx dboard functions and settings + uhd::usrp::dboard_eeprom_t _rx_db_eeprom; + void rx_dboard_get(const wax::obj &, wax::obj &); + void rx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _rx_dboard_proxy; + + //tx dboard functions and settings + uhd::usrp::dboard_eeprom_t _tx_db_eeprom, _gdb_eeprom; + void tx_dboard_get(const wax::obj &, wax::obj &); + void tx_dboard_set(const wax::obj &, const wax::obj &); + wax_obj_proxy::sptr _tx_dboard_proxy; + + //rx ddc functions and settings + void rx_ddc_init(void); + void rx_ddc_get(const wax::obj &, wax::obj &); + void rx_ddc_set(const wax::obj &, const wax::obj &); + double _ddc_freq; size_t _ddc_decim; + wax_obj_proxy::sptr _rx_ddc_proxy; + + //tx duc functions and settings + void tx_duc_init(void); + void tx_duc_get(const wax::obj &, wax::obj &); + void tx_duc_set(const wax::obj &, const wax::obj &); + double _duc_freq; size_t _duc_interp; + wax_obj_proxy::sptr _tx_duc_proxy; + + //transports + b100_ctrl::sptr _fpga_ctrl; + uhd::usrp::fx2_ctrl::sptr _fx2_ctrl; + +}; + +#endif /* INCLUDED_b100_IMPL_HPP */ diff --git a/host/lib/usrp/b100/b100_regs.hpp b/host/lib/usrp/b100/b100_regs.hpp new file mode 100644 index 000000000..010df283e --- /dev/null +++ b/host/lib/usrp/b100/b100_regs.hpp @@ -0,0 +1,264 @@ + + +//////////////////////////////////////////////////////////////// +// +// Memory map for wishbone bus +// +//////////////////////////////////////////////////////////////// + +// All addresses are byte addresses. All accesses are word (16-bit) accesses. +// This means that address bit 0 is usually 0. +// There are 11 bits of address for the control. + +#ifndef __B100_REGS_H +#define __B100_REGS_H + +///////////////////////////////////////////////////// +// Slave pointers + +#define B100_REG_SLAVE(n) ((n)<<7) +#define B100_REG_SR_ADDR(n) ((B100_REG_SETTINGS_BASE) + (4*(n))) + +///////////////////////////////////////////////////// +// Slave 0 -- Misc Regs + +#define B100_REG_MISC_BASE B100_REG_SLAVE(0) + +#define B100_REG_MISC_LED B100_REG_MISC_BASE + 0 +#define B100_REG_MISC_SW B100_REG_MISC_BASE + 2 +#define B100_REG_MISC_CGEN_CTRL B100_REG_MISC_BASE + 4 +#define B100_REG_MISC_CGEN_ST B100_REG_MISC_BASE + 6 +#define B100_REG_MISC_TEST B100_REG_MISC_BASE + 8 +#define B100_REG_MISC_RX_LEN B100_REG_MISC_BASE + 10 +#define B100_REG_MISC_TX_LEN B100_REG_MISC_BASE + 12 +#define B100_REG_MISC_XFER_RATE B100_REG_MISC_BASE + 14 +#define B100_REG_MISC_COMPAT B100_REG_MISC_BASE + 16 + +///////////////////////////////////////////////////// +// Slave 1 -- UART +// CLKDIV is 16 bits, others are only 8 + +#define B100_REG_UART_BASE B100_REG_SLAVE(1) + +#define B100_REG_UART_CLKDIV B100_REG_UART_BASE + 0 +#define B100_REG_UART_TXLEVEL B100_REG_UART_BASE + 2 +#define B100_REG_UART_RXLEVEL B100_REG_UART_BASE + 4 +#define B100_REG_UART_TXCHAR B100_REG_UART_BASE + 6 +#define B100_REG_UART_RXCHAR B100_REG_UART_BASE + 8 + +///////////////////////////////////////////////////// +// Slave 2 -- SPI Core +//these are 32-bit registers mapped onto the 16-bit Wishbone bus. +//Using peek32/poke32 should allow transparent use of these registers. +#define B100_REG_SPI_BASE B100_REG_SLAVE(2) +#define B100_REG_SPI_TXRX0 B100_REG_SPI_BASE + 0 +#define B100_REG_SPI_TXRX1 B100_REG_SPI_BASE + 4 +#define B100_REG_SPI_TXRX2 B100_REG_SPI_BASE + 8 +#define B100_REG_SPI_TXRX3 B100_REG_SPI_BASE + 12 +#define B100_REG_SPI_CTRL B100_REG_SPI_BASE + 16 +#define B100_REG_SPI_DIV B100_REG_SPI_BASE + 20 +#define B100_REG_SPI_SS B100_REG_SPI_BASE + 24 + +//spi slave constants +#define B100_SPI_SS_AD9862 (1 << 2) +#define B100_SPI_SS_TX_DB (1 << 1) +#define B100_SPI_SS_RX_DB (1 << 0) + +//spi ctrl register bit definitions +#define SPI_CTRL_ASS (1<<13) +#define SPI_CTRL_IE (1<<12) +#define SPI_CTRL_LSB (1<<11) +#define SPI_CTRL_TXNEG (1<<10) //mosi edge, push on falling edge when 1 +#define SPI_CTRL_RXNEG (1<< 9) //miso edge, latch on falling edge when 1 +#define SPI_CTRL_GO_BSY (1<< 8) +#define SPI_CTRL_CHAR_LEN_MASK 0x7F + +//////////////////////////////////////////////// +// Slave 3 -- I2C Core + +#define B100_REG_I2C_BASE B100_REG_SLAVE(3) +#define B100_REG_I2C_PRESCALER_LO B100_REG_I2C_BASE + 0 +#define B100_REG_I2C_PRESCALER_HI B100_REG_I2C_BASE + 2 +#define B100_REG_I2C_CTRL B100_REG_I2C_BASE + 4 +#define B100_REG_I2C_DATA B100_REG_I2C_BASE + 6 +#define B100_REG_I2C_CMD_STATUS B100_REG_I2C_BASE + 8 + +//and while we're here... + +// +// STA, STO, RD, WR, and IACK bits are cleared automatically +// + +#define I2C_CTRL_EN (1 << 7) // core enable +#define I2C_CTRL_IE (1 << 6) // interrupt enable + +#define I2C_CMD_START (1 << 7) // generate (repeated) start condition +#define I2C_CMD_STOP (1 << 6) // generate stop condition +#define I2C_CMD_RD (1 << 5) // read from slave +#define I2C_CMD_WR (1 << 4) // write to slave +#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) +#define I2C_CMD_RSVD_2 (1 << 2) // reserved +#define I2C_CMD_RSVD_1 (1 << 1) // reserved +#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt + +#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) +#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected +#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration +#define I2C_ST_RSVD_4 (1 << 4) // reserved +#define I2C_ST_RSVD_3 (1 << 3) // reserved +#define I2C_ST_RSVD_2 (1 << 2) // reserved +#define I2C_ST_TIP (1 << 1) // Transfer-in-progress +#define I2C_ST_IP (1 << 0) // Interrupt pending + +//////////////////////////////////////////////// +// Slave 4 -- GPIO + +#define B100_REG_GPIO_BASE B100_REG_SLAVE(4) + +#define B100_REG_GPIO_RX_IO B100_REG_GPIO_BASE + 0 +#define B100_REG_GPIO_TX_IO B100_REG_GPIO_BASE + 2 +#define B100_REG_GPIO_RX_DDR B100_REG_GPIO_BASE + 4 +#define B100_REG_GPIO_TX_DDR B100_REG_GPIO_BASE + 6 +#define B100_REG_GPIO_RX_SEL B100_REG_GPIO_BASE + 8 +#define B100_REG_GPIO_TX_SEL B100_REG_GPIO_BASE + 10 +#define B100_REG_GPIO_RX_DBG B100_REG_GPIO_BASE + 12 +#define B100_REG_GPIO_TX_DBG B100_REG_GPIO_BASE + 14 + +//possible bit values for sel when dbg is 0: +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic + +//possible bit values for sel when dbg is 1: +#define GPIO_SEL_DEBUG_0 0 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 1 // if pin is an output, debug lines from FPGA fabric + +/////////////////////////////////////////////////// +// Slave 6 -- ATR Controller +// 16 regs + +#define B100_REG_ATR_BASE B100_REG_SLAVE(6) + +#define B100_REG_ATR_IDLE_RXSIDE B100_REG_ATR_BASE + 0 +#define B100_REG_ATR_IDLE_TXSIDE B100_REG_ATR_BASE + 2 +#define B100_REG_ATR_INTX_RXSIDE B100_REG_ATR_BASE + 4 +#define B100_REG_ATR_INTX_TXSIDE B100_REG_ATR_BASE + 6 +#define B100_REG_ATR_INRX_RXSIDE B100_REG_ATR_BASE + 8 +#define B100_REG_ATR_INRX_TXSIDE B100_REG_ATR_BASE + 10 +#define B100_REG_ATR_FULL_RXSIDE B100_REG_ATR_BASE + 12 +#define B100_REG_ATR_FULL_TXSIDE B100_REG_ATR_BASE + 14 + +/////////////////////////////////////////////////// +// Slave 7 -- Readback Mux 32 + +#define B100_REG_RB_MUX_32_BASE B100_REG_SLAVE(7) + +#define B100_REG_RB_TIME_NOW_SECS B100_REG_RB_MUX_32_BASE + 0 +#define B100_REG_RB_TIME_NOW_TICKS B100_REG_RB_MUX_32_BASE + 4 +#define B100_REG_RB_TIME_PPS_SECS B100_REG_RB_MUX_32_BASE + 8 +#define B100_REG_RB_TIME_PPS_TICKS B100_REG_RB_MUX_32_BASE + 12 +#define B100_REG_RB_MISC_TEST32 B100_REG_RB_MUX_32_BASE + 16 + +//////////////////////////////////////////////////// +// Slaves 8 & 9 -- Settings Bus +// +// Output-only, no readback, 64 registers total +// Each register must be written 32 bits at a time +// First the address xxx_xx00 and then xxx_xx10 + +#define B100_REG_SETTINGS_BASE_ADDR(n) (B100_REG_SLAVE(8) + (4*(n))) + +#define B100_REG_SR_MISC_TEST32 B100_REG_SETTINGS_BASE_ADDR(52) + +///////////////////////////////////////////////// +// DSP RX Regs +//////////////////////////////////////////////// +#define B100_REG_DSP_RX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(16) + (4*(n))) +#define B100_REG_DSP_RX_FREQ B100_REG_DSP_RX_ADDR(0) +#define B100_REG_DSP_RX_SCALE_IQ B100_REG_DSP_RX_ADDR(1) // {scale_i,scale_q} +#define B100_REG_DSP_RX_DECIM_RATE B100_REG_DSP_RX_ADDR(2) // hb and decim rate +#define B100_REG_DSP_RX_DCOFFSET_I B100_REG_DSP_RX_ADDR(3) // Bit 31 high sets fixed offset mode, using lower 14 bits, // otherwise it is automatic +#define B100_REG_DSP_RX_DCOFFSET_Q B100_REG_DSP_RX_ADDR(4) // Bit 31 high sets fixed offset mode, using lower 14 bits +#define B100_REG_DSP_RX_MUX B100_REG_DSP_RX_ADDR(5) + +/////////////////////////////////////////////////// +// VITA RX CTRL regs +/////////////////////////////////////////////////// +// The following 3 are logically a single command register. +// They are clocked into the underlying fifo when time_ticks is written. +#define B100_REG_CTRL_RX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(0) + (4*(n))) +#define B100_REG_CTRL_RX_STREAM_CMD B100_REG_CTRL_RX_ADDR(0) // {now, chain, num_samples(30) +#define B100_REG_CTRL_RX_TIME_SECS B100_REG_CTRL_RX_ADDR(1) +#define B100_REG_CTRL_RX_TIME_TICKS B100_REG_CTRL_RX_ADDR(2) +#define B100_REG_CTRL_RX_CLEAR_OVERRUN B100_REG_CTRL_RX_ADDR(3) // write anything to clear overrun +#define B100_REG_CTRL_RX_VRT_HEADER B100_REG_CTRL_RX_ADDR(4) // word 0 of packet. FPGA fills in packet counter +#define B100_REG_CTRL_RX_VRT_STREAM_ID B100_REG_CTRL_RX_ADDR(5) // word 1 of packet. +#define B100_REG_CTRL_RX_VRT_TRAILER B100_REG_CTRL_RX_ADDR(6) +#define B100_REG_CTRL_RX_NSAMPS_PER_PKT B100_REG_CTRL_RX_ADDR(7) +#define B100_REG_CTRL_RX_NCHANNELS B100_REG_CTRL_RX_ADDR(8) // 1 in basic case, up to 4 for vector sources + +///////////////////////////////////////////////// +// DSP TX Regs +//////////////////////////////////////////////// +#define B100_REG_DSP_TX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(32) + (4*(n))) +#define B100_REG_DSP_TX_FREQ B100_REG_DSP_TX_ADDR(0) +#define B100_REG_DSP_TX_SCALE_IQ B100_REG_DSP_TX_ADDR(1) // {scale_i,scale_q} +#define B100_REG_DSP_TX_INTERP_RATE B100_REG_DSP_TX_ADDR(2) +#define B100_REG_DSP_TX_UNUSED B100_REG_DSP_TX_ADDR(3) +#define B100_REG_DSP_TX_MUX B100_REG_DSP_TX_ADDR(4) + +///////////////////////////////////////////////// +// VITA TX CTRL regs +//////////////////////////////////////////////// +#define B100_REG_CTRL_TX_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(24) + (4*(n))) +#define B100_REG_CTRL_TX_NCHANNELS B100_REG_CTRL_TX_ADDR(0) +#define B100_REG_CTRL_TX_CLEAR_UNDERRUN B100_REG_CTRL_TX_ADDR(1) +#define B100_REG_CTRL_TX_REPORT_SID B100_REG_CTRL_TX_ADDR(2) +#define B100_REG_CTRL_TX_POLICY B100_REG_CTRL_TX_ADDR(3) + +#define B100_FLAG_CTRL_TX_POLICY_WAIT (0x1 << 0) +#define B100_FLAG_CTRL_TX_POLICY_NEXT_PACKET (0x1 << 1) +#define B100_FLAG_CTRL_TX_POLICY_NEXT_BURST (0x1 << 2) + +///////////////////////////////////////////////// +// VITA49 64 bit time (write only) +//////////////////////////////////////////////// + /*! + * \brief Time 64 flags + * + * <pre> + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-----------------------------------------------------------+-+-+ + * | |S|P| + * +-----------------------------------------------------------+-+-+ + * + * P - PPS edge selection (0=negedge, 1=posedge, default=0) + * S - Source (0=sma, 1=mimo, 0=default) + * + * </pre> + */ +#define B100_REG_TIME64_ADDR(n) (B100_REG_SETTINGS_BASE_ADDR(40) + (4*(n))) +#define B100_REG_TIME64_SECS B100_REG_TIME64_ADDR(0) // value to set absolute secs to on next PPS +#define B100_REG_TIME64_TICKS B100_REG_TIME64_ADDR(1) // value to set absolute ticks to on next PPS +#define B100_REG_TIME64_FLAGS B100_REG_TIME64_ADDR(2) // flags - see chart above +#define B100_REG_TIME64_IMM B100_REG_TIME64_ADDR(3) // set immediate (0=latch on next pps, 1=latch immediate, default=0) +#define B100_REG_TIME64_TPS B100_REG_TIME64_ADDR(4) // clock ticks per second (counter rollover) + +//pps flags (see above) +#define B100_FLAG_TIME64_PPS_NEGEDGE (0 << 0) +#define B100_FLAG_TIME64_PPS_POSEDGE (1 << 0) +#define B100_FLAG_TIME64_PPS_SMA (0 << 1) +#define B100_FLAG_TIME64_PPS_MIMO (1 << 1) + +#define B100_FLAG_TIME64_LATCH_NOW 1 +#define B100_FLAG_TIME64_LATCH_NEXT_PPS 0 + +#define B100_REG_CLEAR_RX_FIFO B100_REG_SETTINGS_BASE_ADDR(48) +#define B100_REG_CLEAR_TX_FIFO B100_REG_SETTINGS_BASE_ADDR(49) + +#define B100_REG_GLOBAL_RESET B100_REG_SETTINGS_BASE_ADDR(50) +#define B100_REG_TEST32 B100_REG_SETTINGS_BASE_ADDR(52) + +#endif + diff --git a/host/lib/usrp/b100/clock_ctrl.cpp b/host/lib/usrp/b100/clock_ctrl.cpp new file mode 100644 index 000000000..e138242d1 --- /dev/null +++ b/host/lib/usrp/b100/clock_ctrl.cpp @@ -0,0 +1,525 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "clock_ctrl.hpp" +#include "ad9522_regs.hpp" +#include <uhd/utils/log.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/assert_has.hpp> +#include <uhd/utils/safe_call.hpp> +#include <boost/cstdint.hpp> +#include "b100_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/common_factor_rt.hpp> //gcd +#include <algorithm> +#include <utility> + +using namespace uhd; + +/*********************************************************************** + * Constants + **********************************************************************/ +static const bool ENABLE_THE_TEST_OUT = true; +static const double REFERENCE_INPUT_RATE = 10e6; + +/*********************************************************************** + * Helpers + **********************************************************************/ +template <typename div_type, typename bypass_type> static void set_clock_divider( + size_t divider, div_type &low, div_type &high, bypass_type &bypass +){ + high = divider/2 - 1; + low = divider - high - 2; + bypass = (divider == 1)? 1 : 0; +} + +/*********************************************************************** + * Clock rate calculation stuff: + * Using the internal VCO between 1400 and 1800 MHz + **********************************************************************/ +struct clock_settings_type{ + size_t ref_clock_doubler, r_counter, a_counter, b_counter, prescaler, vco_divider, chan_divider; + size_t get_n_counter(void) const{return prescaler * b_counter + a_counter;} + double get_ref_rate(void) const{return REFERENCE_INPUT_RATE * ref_clock_doubler;} + double get_vco_rate(void) const{return get_ref_rate()/r_counter * get_n_counter();} + double get_chan_rate(void) const{return get_vco_rate()/vco_divider;} + double get_out_rate(void) const{return get_chan_rate()/chan_divider;} + std::string to_pp_string(void) const{ + return str(boost::format( + " r_counter: %d\n" + " a_counter: %d\n" + " b_counter: %d\n" + " prescaler: %d\n" + " vco_divider: %d\n" + " chan_divider: %d\n" + " vco_rate: %fMHz\n" + " chan_rate: %fMHz\n" + " out_rate: %fMHz\n" + ) + % r_counter + % a_counter + % b_counter + % prescaler + % vco_divider + % chan_divider + % (get_vco_rate()/1e6) + % (get_chan_rate()/1e6) + % (get_out_rate()/1e6) + ); + } +}; + +//! gives the greatest divisor of num between 1 and max inclusive +template<typename T> static inline T greatest_divisor(T num, T max){ + for (T i = max; i > 1; i--) if (num%i == 0) return i; return 1; +} + +//! gives the least divisor of num between min and num exclusive +template<typename T> static inline T least_divisor(T num, T min){ + for (T i = min; i < num; i++) if (num%i == 0) return i; return 1; +} + +static clock_settings_type get_clock_settings(double rate){ + clock_settings_type cs; + cs.ref_clock_doubler = 2; //always doubling + cs.prescaler = 8; //set to 8 when input is under 2400 MHz + + //basic formulas used below: + //out_rate*X = ref_rate*Y + //X = i*ref_rate/gcd + //Y = i*out_rate/gcd + //X = chan_div * vco_div * R + //Y = P*B + A + + const boost::uint64_t out_rate = boost::uint64_t(rate); + const boost::uint64_t ref_rate = boost::uint64_t(cs.get_ref_rate()); + const size_t gcd = size_t(boost::math::gcd(ref_rate, out_rate)); + + for (size_t i = 1; i <= 100; i++){ + const size_t X = i*ref_rate/gcd; + const size_t Y = i*out_rate/gcd; + + //determine A and B (P is fixed) + cs.b_counter = Y/cs.prescaler; + cs.a_counter = Y - cs.b_counter*cs.prescaler; + + static const double vco_bound_pad = 100e6; + for ( //calculate an r divider that fits into the bounds of the vco + cs.r_counter = size_t(cs.get_n_counter()*cs.get_ref_rate()/(1800e6 - vco_bound_pad)); + cs.r_counter <= size_t(cs.get_n_counter()*cs.get_ref_rate()/(1400e6 + vco_bound_pad)) + and cs.r_counter > 0; cs.r_counter++ + ){ + + //determine chan_div and vco_div + //and fill in that order of preference + cs.chan_divider = greatest_divisor<size_t>(X/cs.r_counter, 32); + cs.vco_divider = greatest_divisor<size_t>(X/cs.chan_divider/cs.r_counter, 6); + + //avoid a vco divider of 1 (if possible) + if (cs.vco_divider == 1){ + cs.vco_divider = least_divisor<size_t>(cs.chan_divider, 2); + cs.chan_divider /= cs.vco_divider; + } + + UHD_LOGV(always) + << "gcd " << gcd << std::endl + << "X " << X << std::endl + << "Y " << Y << std::endl + << cs.to_pp_string() << std::endl + ; + + //filter limits on the counters + if (cs.vco_divider == 1) continue; + if (cs.r_counter >= (1<<14)) continue; + if (cs.b_counter == 2) continue; + if (cs.b_counter == 1 and cs.a_counter != 0) continue; + if (cs.b_counter >= (1<<13)) continue; + if (cs.a_counter >= (1<<6)) continue; + + UHD_MSG(status) << "USRP-B100 clock control: " << i << std::endl << cs.to_pp_string() << std::endl; + return cs; + } + } + + throw uhd::runtime_error(str(boost::format( + "USRP-B100 clock control: could not calculate settings for clock rate %fMHz" + ) % (rate/1e6))); +} + +/*********************************************************************** + * Clock Control Implementation + **********************************************************************/ +class b100_clock_ctrl_impl : public b100_clock_ctrl{ +public: + b100_clock_ctrl_impl(b100_iface::sptr iface, double master_clock_rate){ + _iface = iface; + _chan_rate = 0.0; + _out_rate = 0.0; + + //init the clock gen registers + _ad9522_regs.sdo_active = ad9522_regs_t::SDO_ACTIVE_SDO_SDIO; + _ad9522_regs.enb_stat_eeprom_at_stat_pin = 0; //use status pin + _ad9522_regs.status_pin_control = 0x1; //n divider + _ad9522_regs.ld_pin_control = 0x00; //dld + _ad9522_regs.refmon_pin_control = 0x12; //show ref2 + _ad9522_regs.lock_detect_counter = ad9522_regs_t::LOCK_DETECT_COUNTER_16CYC; + + this->use_internal_ref(); + + this->set_fpga_clock_rate(master_clock_rate); //initialize to something + + this->enable_fpga_clock(true); + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + } + + ~b100_clock_ctrl_impl(void){ + UHD_SAFE_CALL( + this->enable_test_clock(ENABLE_THE_TEST_OUT); + this->enable_rx_dboard_clock(false); + this->enable_tx_dboard_clock(false); + //this->enable_fpga_clock(false); //FIXME + ) + } + + /*********************************************************************** + * Clock rate control: + * - set clock rate w/ internal VCO + * - set clock rate w/ external VCXO + **********************************************************************/ + void set_clock_settings_with_internal_vco(double rate){ + const clock_settings_type cs = get_clock_settings(rate); + + //set the rates to private variables so the implementation knows! + _chan_rate = cs.get_chan_rate(); + _out_rate = cs.get_out_rate(); + + _ad9522_regs.enable_clock_doubler = (cs.ref_clock_doubler == 2)? 1 : 0; + + _ad9522_regs.set_r_counter(cs.r_counter); + _ad9522_regs.a_counter = cs.a_counter; + _ad9522_regs.set_b_counter(cs.b_counter); + UHD_ASSERT_THROW(cs.prescaler == 8); //assumes this below: + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV8_9; + + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + + _ad9522_regs.bypass_vco_divider = 0; + switch(cs.vco_divider){ + case 1: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV1; break; + case 2: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV2; break; + case 3: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV3; break; + case 4: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV4; break; + case 5: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV5; break; + case 6: _ad9522_regs.vco_divider = ad9522_regs_t::VCO_DIVIDER_DIV6; break; + } + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_VCO; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + set_clock_divider(cs.chan_divider, + _ad9522_regs.divider0_low_cycles, + _ad9522_regs.divider0_high_cycles, + _ad9522_regs.divider0_bypass + ); + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + set_clock_divider(cs.chan_divider, + _ad9522_regs.divider1_low_cycles, + _ad9522_regs.divider1_high_cycles, + _ad9522_regs.divider1_bypass + ); + + this->send_all_regs(); + calibrate_now(); + } + + void set_clock_settings_with_external_vcxo(double rate){ + //set the rates to private variables so the implementation knows! + _chan_rate = rate; + _out_rate = rate; + + _ad9522_regs.enable_clock_doubler = 1; //doubler always on + const double ref_rate = REFERENCE_INPUT_RATE*2; + + //bypass prescaler such that N = B + long gcd = boost::math::gcd(long(ref_rate), long(rate)); + _ad9522_regs.set_r_counter(int(ref_rate/gcd)); + _ad9522_regs.a_counter = 0; + _ad9522_regs.set_b_counter(int(rate/gcd)); + _ad9522_regs.prescaler_p = ad9522_regs_t::PRESCALER_P_DIV1; + + //setup external vcxo + _ad9522_regs.pll_power_down = ad9522_regs_t::PLL_POWER_DOWN_NORMAL; + _ad9522_regs.cp_current = ad9522_regs_t::CP_CURRENT_1_2MA; + _ad9522_regs.bypass_vco_divider = 1; + _ad9522_regs.select_vco_or_clock = ad9522_regs_t::SELECT_VCO_OR_CLOCK_EXTERNAL; + + //setup fpga master clock + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + _ad9522_regs.divider0_bypass = 1; + + //setup codec clock + _ad9522_regs.out3_format = ad9522_regs_t::OUT3_FORMAT_LVDS; + _ad9522_regs.divider1_bypass = 1; + + this->send_all_regs(); + } + + void set_fpga_clock_rate(double rate){ + if (_out_rate == rate) return; + if (rate == 61.44e6) set_clock_settings_with_external_vcxo(rate); + else set_clock_settings_with_internal_vco(rate); + //clock rate changed! update dboard clocks and FPGA ticks per second + set_rx_dboard_clock_rate(rate); + set_tx_dboard_clock_rate(rate); + _iface->poke32(B100_REG_TIME64_TPS, boost::uint32_t(get_fpga_clock_rate())); + } + + double get_fpga_clock_rate(void){ + return this->_out_rate; + } + + /*********************************************************************** + * FPGA clock enable + **********************************************************************/ + void enable_fpga_clock(bool enb){ + _ad9522_regs.out0_format = ad9522_regs_t::OUT0_FORMAT_LVDS; + _ad9522_regs.out0_lvds_power_down = !enb; + this->send_reg(0x0F0); + this->latch_regs(); + } + + /*********************************************************************** + * Special test clock output + **********************************************************************/ + void enable_test_clock(bool enb){ + //setup test clock (same divider as codec clock) + _ad9522_regs.out4_format = ad9522_regs_t::OUT4_FORMAT_CMOS; + _ad9522_regs.out4_cmos_configuration = (enb)? + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_A_ON : + ad9522_regs_t::OUT4_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F4); + this->latch_regs(); + } + + /*********************************************************************** + * RX Dboard Clock Control (output 9, divider 3) + **********************************************************************/ + void enable_rx_dboard_clock(bool enb){ + _ad9522_regs.out9_format = ad9522_regs_t::OUT9_FORMAT_CMOS; + _ad9522_regs.out9_cmos_configuration = (enb)? + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT9_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F9); + this->latch_regs(); + } + + std::vector<double> get_rx_dboard_clock_rates(void){ + std::vector<double> rates; + for(size_t div = 1; div <= 16+16; div++) + rates.push_back(this->_chan_rate/div); + return rates; + } + + void set_rx_dboard_clock_rate(double rate){ + assert_has(get_rx_dboard_clock_rates(), rate, "rx dboard clock rate"); + _rx_clock_rate = rate; + size_t divider = size_t(this->_chan_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider3_low_cycles, + _ad9522_regs.divider3_high_cycles, + _ad9522_regs.divider3_bypass + ); + this->send_reg(0x199); + this->send_reg(0x19a); + this->soft_sync(); + } + + double get_rx_clock_rate(void){ + return _rx_clock_rate; + } + + /*********************************************************************** + * TX Dboard Clock Control (output 6, divider 2) + **********************************************************************/ + void enable_tx_dboard_clock(bool enb){ + _ad9522_regs.out6_format = ad9522_regs_t::OUT6_FORMAT_CMOS; + _ad9522_regs.out6_cmos_configuration = (enb)? + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_B_ON : + ad9522_regs_t::OUT6_CMOS_CONFIGURATION_OFF; + this->send_reg(0x0F6); + this->latch_regs(); + } + + std::vector<double> get_tx_dboard_clock_rates(void){ + return get_rx_dboard_clock_rates(); //same master clock, same dividers... + } + + void set_tx_dboard_clock_rate(double rate){ + assert_has(get_tx_dboard_clock_rates(), rate, "tx dboard clock rate"); + _tx_clock_rate = rate; + size_t divider = size_t(this->_chan_rate/rate); + //set the divider registers + set_clock_divider(divider, + _ad9522_regs.divider2_low_cycles, + _ad9522_regs.divider2_high_cycles, + _ad9522_regs.divider2_bypass + ); + this->send_reg(0x196); + this->send_reg(0x197); + this->soft_sync(); + } + + double get_tx_clock_rate(void){ + return _tx_clock_rate; + } + + /*********************************************************************** + * Clock reference control + **********************************************************************/ + void use_internal_ref(void) { + _ad9522_regs.enable_ref2 = 1; + _ad9522_regs.enable_ref1 = 0; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF2; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_MANUAL; + this->send_reg(0x01C); + this->latch_regs(); + } + + void use_external_ref(void) { + _ad9522_regs.enable_ref2 = 0; + _ad9522_regs.enable_ref1 = 1; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF1; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_MANUAL; + this->send_reg(0x01C); + this->latch_regs(); + } + + void use_auto_ref(void) { + _ad9522_regs.enable_ref2 = 1; + _ad9522_regs.enable_ref1 = 1; + _ad9522_regs.select_ref = ad9522_regs_t::SELECT_REF_REF1; + _ad9522_regs.enb_auto_ref_switchover = ad9522_regs_t::ENB_AUTO_REF_SWITCHOVER_AUTO; + this->send_reg(0x01C); + this->latch_regs(); + } + +private: + b100_iface::sptr _iface; + ad9522_regs_t _ad9522_regs; + double _out_rate; //rate at the fpga and codec + double _chan_rate; //rate before final dividers + double _rx_clock_rate, _tx_clock_rate; + + void latch_regs(void){ + _ad9522_regs.io_update = 1; + this->send_reg(0x232); + } + + void send_reg(boost::uint16_t addr){ + boost::uint32_t reg = _ad9522_regs.get_write_reg(addr); + UHD_LOGV(often) << "clock control write reg: " << std::hex << reg << std::endl; + byte_vector_t buf; + buf.push_back(boost::uint8_t(reg >> 16)); + buf.push_back(boost::uint8_t(reg >> 8)); + buf.push_back(boost::uint8_t(reg & 0xff)); + + _iface->get_fx2_i2c_iface().write_i2c(0x5C, buf); + } + + boost::uint8_t read_reg(boost::uint16_t addr){ + byte_vector_t buf; + buf.push_back(boost::uint8_t(addr >> 8)); + buf.push_back(boost::uint8_t(addr & 0xff)); + _iface->get_fx2_i2c_iface().write_i2c(0x5C, buf); + + buf = _iface->get_fx2_i2c_iface().read_i2c(0x5C, 1); + + return boost::uint32_t(buf[0] & 0xFF); + } + + void calibrate_now(void){ + //vco calibration routine: + _ad9522_regs.vco_calibration_now = 0; + this->send_reg(0x18); + this->latch_regs(); + _ad9522_regs.vco_calibration_now = 1; + this->send_reg(0x18); + this->latch_regs(); + //wait for calibration done: + static const boost::uint8_t addr = 0x01F; + for (size_t ms10 = 0; ms10 < 100; ms10++){ + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + boost::uint32_t reg = read_reg(addr); + _ad9522_regs.set_reg(addr, reg); + if (_ad9522_regs.vco_calibration_finished) goto wait_for_ld; + } + UHD_MSG(error) << "USRP-B100 clock control: VCO calibration timeout" << std::endl; + wait_for_ld: + //wait for digital lock detect: + for (size_t ms10 = 0; ms10 < 100; ms10++){ + boost::this_thread::sleep(boost::posix_time::milliseconds(10)); + boost::uint32_t reg = read_reg(addr); + _ad9522_regs.set_reg(addr, reg); + if (_ad9522_regs.digital_lock_detect) return; + } + UHD_MSG(error) << "USRP-B100 clock control: lock detection timeout" << std::endl; + } + + void soft_sync(void){ + _ad9522_regs.soft_sync = 1; + this->send_reg(0x230); + this->latch_regs(); + _ad9522_regs.soft_sync = 0; + this->send_reg(0x230); + this->latch_regs(); + } + + void send_all_regs(void){ + //setup a list of register ranges to write + typedef std::pair<boost::uint16_t, boost::uint16_t> range_t; + static const std::vector<range_t> ranges = boost::assign::list_of + (range_t(0x000, 0x000)) (range_t(0x010, 0x01F)) + (range_t(0x0F0, 0x0FD)) (range_t(0x190, 0x19B)) + (range_t(0x1E0, 0x1E1)) (range_t(0x230, 0x230)) + ; + + //write initial register values and latch/update + BOOST_FOREACH(const range_t &range, ranges){ + for(boost::uint16_t addr = range.first; addr <= range.second; addr++){ + this->send_reg(addr); + } + } + this->latch_regs(); + } +}; + +/*********************************************************************** + * Clock Control Make + **********************************************************************/ +b100_clock_ctrl::sptr b100_clock_ctrl::make(b100_iface::sptr iface, double master_clock_rate){ + return sptr(new b100_clock_ctrl_impl(iface, master_clock_rate)); +} diff --git a/host/lib/usrp/b100/clock_ctrl.hpp b/host/lib/usrp/b100/clock_ctrl.hpp new file mode 100644 index 000000000..2a2e74024 --- /dev/null +++ b/host/lib/usrp/b100/clock_ctrl.hpp @@ -0,0 +1,118 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_B100_CLOCK_CTRL_HPP +#define INCLUDED_B100_CLOCK_CTRL_HPP + +#include "b100_iface.hpp" +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> +#include <vector> + +/*! + * The usrp-e clock control: + * - Setup system clocks. + * - Disable/enable clock lines. + */ +class b100_clock_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<b100_clock_ctrl> sptr; + + /*! + * Make a new clock control object. + * \param iface the b100 iface object + * \param master_clock_rate the master FPGA/sample clock rate + * \return the clock control object + */ + static sptr make(b100_iface::sptr iface, double master_clock_rate); + + /*! + * Set the rate of the fpga clock line. + * Throws if rate is not valid. + * \param rate the new rate in Hz + */ + virtual void set_fpga_clock_rate(double rate) = 0; + + /*! + * Get the rate of the fpga clock line. + * \return the fpga clock rate in Hz + */ + virtual double get_fpga_clock_rate(void) = 0; + + /*! + * Get the possible rates of the rx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_rx_dboard_clock_rates(void) = 0; + + /*! + * Get the possible rates of the tx dboard clock. + * \return a vector of clock rates in Hz + */ + virtual std::vector<double> get_tx_dboard_clock_rates(void) = 0; + + /*! + * Set the rx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_rx_dboard_clock_rate(double rate) = 0; + + /*! + * Set the tx dboard clock rate to a possible rate. + * \param rate the new clock rate in Hz + * \throw exception when rate cannot be achieved + */ + virtual void set_tx_dboard_clock_rate(double rate) = 0; + + /*! + * Enable/disable the FPGA clock. + * \param enb true to enable + */ + + virtual void enable_fpga_clock(bool enb) = 0; + + /*! + * Enable/disable the rx dboard clock. + * \param enb true to enable + */ + virtual void enable_rx_dboard_clock(bool enb) = 0; + + /*! + * Enable/disable the tx dboard clock. + * \param enb true to enable + */ + virtual void enable_tx_dboard_clock(bool enb) = 0; + + /*! + * Use the internal TCXO reference + */ + virtual void use_internal_ref(void) = 0; + + /*! + * Use the external SMA reference + */ + virtual void use_external_ref(void) = 0; + + /*! + * Use external if available, internal otherwise + */ + virtual void use_auto_ref(void) = 0; + +}; + +#endif /* INCLUDED_B100_CLOCK_CTRL_HPP */ diff --git a/host/lib/usrp/b100/codec_ctrl.cpp b/host/lib/usrp/b100/codec_ctrl.cpp new file mode 100644 index 000000000..4d118b68b --- /dev/null +++ b/host/lib/usrp/b100/codec_ctrl.cpp @@ -0,0 +1,283 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "codec_ctrl.hpp" +#include "ad9862_regs.hpp" +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/algorithm.hpp> +#include <uhd/utils/log.hpp> +#include <uhd/utils/safe_call.hpp> +#include <boost/cstdint.hpp> +#include <boost/tuple/tuple.hpp> +#include <boost/math/special_functions/round.hpp> +#include "b100_regs.hpp" //spi slave constants +#include <boost/assign/list_of.hpp> + +using namespace uhd; + +const gain_range_t b100_codec_ctrl::tx_pga_gain_range(-20, 0, double(0.1)); +const gain_range_t b100_codec_ctrl::rx_pga_gain_range(0, 20, 1); + +/*********************************************************************** + * Codec Control Implementation + **********************************************************************/ +class b100_codec_ctrl_impl : public b100_codec_ctrl{ +public: + //structors + b100_codec_ctrl_impl(b100_iface::sptr iface); + ~b100_codec_ctrl_impl(void); + + //aux adc and dac control + double read_aux_adc(aux_adc_t which); + void write_aux_dac(aux_dac_t which, double volts); + + //pga gain control + void set_tx_pga_gain(double); + double get_tx_pga_gain(void); + void set_rx_pga_gain(double, char); + double get_rx_pga_gain(char); + +private: + b100_iface::sptr _iface; + ad9862_regs_t _ad9862_regs; + void send_reg(boost::uint8_t addr); + void recv_reg(boost::uint8_t addr); +}; + +/*********************************************************************** + * Codec Control Structors + **********************************************************************/ +b100_codec_ctrl_impl::b100_codec_ctrl_impl(b100_iface::sptr iface){ + _iface = iface; + + //soft reset + _ad9862_regs.soft_reset = 1; + this->send_reg(0); + + //initialize the codec register settings + _ad9862_regs.sdio_bidir = ad9862_regs_t::SDIO_BIDIR_SDIO_SDO; + _ad9862_regs.lsb_first = ad9862_regs_t::LSB_FIRST_MSB; + _ad9862_regs.soft_reset = 0; + + //setup rx side of codec + _ad9862_regs.byp_buffer_a = 1; + _ad9862_regs.byp_buffer_b = 1; + _ad9862_regs.buffer_a_pd = 1; + _ad9862_regs.buffer_b_pd = 1; + _ad9862_regs.mux_out = ad9862_regs_t::MUX_OUT_RX_MUX_MODE; //B100 uses interleaved RX->FPGA + _ad9862_regs.rx_pga_a = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_pga_b = 0;//0x1f; //TODO bring under api control + _ad9862_regs.rx_twos_comp = 1; + _ad9862_regs.rx_hilbert = ad9862_regs_t::RX_HILBERT_DIS; + + //setup tx side of codec + _ad9862_regs.two_data_paths = ad9862_regs_t::TWO_DATA_PATHS_BOTH; + _ad9862_regs.interleaved = ad9862_regs_t::INTERLEAVED_INTERLEAVED; + _ad9862_regs.tx_retime = ad9862_regs_t::TX_RETIME_CLKOUT2; + _ad9862_regs.tx_pga_gain = 199; //TODO bring under api control + _ad9862_regs.tx_hilbert = ad9862_regs_t::TX_HILBERT_DIS; + _ad9862_regs.interp = ad9862_regs_t::INTERP_2; + _ad9862_regs.tx_twos_comp = 1; + _ad9862_regs.fine_mode = ad9862_regs_t::FINE_MODE_BYPASS; + _ad9862_regs.coarse_mod = ad9862_regs_t::COARSE_MOD_BYPASS; + _ad9862_regs.dac_a_coarse_gain = 0x3; + _ad9862_regs.dac_b_coarse_gain = 0x3; + _ad9862_regs.edges = ad9862_regs_t::EDGES_NORMAL; + + //setup the dll + _ad9862_regs.input_clk_ctrl = ad9862_regs_t::INPUT_CLK_CTRL_EXTERNAL; + _ad9862_regs.dll_mult = ad9862_regs_t::DLL_MULT_2; + _ad9862_regs.dll_mode = ad9862_regs_t::DLL_MODE_FAST; + + //write the register settings to the codec + for (uint8_t addr = 0; addr <= 25; addr++){ + this->send_reg(addr); + } + + //always start conversions for aux ADC + _ad9862_regs.start_a = 1; + _ad9862_regs.start_b = 1; + + //aux adc clock + _ad9862_regs.clk_4 = ad9862_regs_t::CLK_4_1_4; + this->send_reg(34); +} + +b100_codec_ctrl_impl::~b100_codec_ctrl_impl(void){ + UHD_SAFE_CALL( + //set aux dacs to zero + this->write_aux_dac(AUX_DAC_A, 0); + this->write_aux_dac(AUX_DAC_B, 0); + this->write_aux_dac(AUX_DAC_C, 0); + this->write_aux_dac(AUX_DAC_D, 0); + + //power down + _ad9862_regs.all_rx_pd = 1; + this->send_reg(1); + _ad9862_regs.tx_digital_pd = 1; + _ad9862_regs.tx_analog_pd = ad9862_regs_t::TX_ANALOG_PD_BOTH; + this->send_reg(8); + ) +} + +/*********************************************************************** + * Codec Control Gain Control Methods + **********************************************************************/ +static const int mtpgw = 255; //maximum tx pga gain word + +void b100_codec_ctrl_impl::set_tx_pga_gain(double gain){ + int gain_word = int(mtpgw*(gain - tx_pga_gain_range.start())/(tx_pga_gain_range.stop() - tx_pga_gain_range.start())); + _ad9862_regs.tx_pga_gain = uhd::clip(gain_word, 0, mtpgw); + this->send_reg(16); +} + +double b100_codec_ctrl_impl::get_tx_pga_gain(void){ + return (_ad9862_regs.tx_pga_gain*(tx_pga_gain_range.stop() - tx_pga_gain_range.start())/mtpgw) + tx_pga_gain_range.start(); +} + +static const int mrpgw = 0x14; //maximum rx pga gain word + +void b100_codec_ctrl_impl::set_rx_pga_gain(double gain, char which){ + int gain_word = int(mrpgw*(gain - rx_pga_gain_range.start())/(rx_pga_gain_range.stop() - rx_pga_gain_range.start())); + gain_word = uhd::clip(gain_word, 0, mrpgw); + switch(which){ + case 'A': + _ad9862_regs.rx_pga_a = gain_word; + this->send_reg(2); + return; + case 'B': + _ad9862_regs.rx_pga_b = gain_word; + this->send_reg(3); + return; + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double b100_codec_ctrl_impl::get_rx_pga_gain(char which){ + int gain_word; + switch(which){ + case 'A': gain_word = _ad9862_regs.rx_pga_a; break; + case 'B': gain_word = _ad9862_regs.rx_pga_b; break; + default: UHD_THROW_INVALID_CODE_PATH(); + } + return (gain_word*(rx_pga_gain_range.stop() - rx_pga_gain_range.start())/mrpgw) + rx_pga_gain_range.start(); +} + +/*********************************************************************** + * Codec Control AUX ADC Methods + **********************************************************************/ +static double aux_adc_to_volts(boost::uint8_t high, boost::uint8_t low){ + return double((boost::uint16_t(high) << 2) | low)*3.3/0x3ff; +} + +double b100_codec_ctrl_impl::read_aux_adc(aux_adc_t which){ + switch(which){ + + case AUX_ADC_A1: + _ad9862_regs.select_a = ad9862_regs_t::SELECT_A_AUX_ADC1; + this->send_reg(34); //start conversion and select mux + this->recv_reg(28); //read the value (2 bytes, 2 reads) + this->recv_reg(29); + return aux_adc_to_volts(_ad9862_regs.aux_adc_a1_9_2, _ad9862_regs.aux_adc_a1_1_0); + case AUX_ADC_A2: + _ad9862_regs.select_a = ad9862_regs_t::SELECT_A_AUX_ADC2; + this->send_reg(34); //start conversion and select mux + this->recv_reg(26); //read the value (2 bytes, 2 reads) + this->recv_reg(27); + return aux_adc_to_volts(_ad9862_regs.aux_adc_a2_9_2, _ad9862_regs.aux_adc_a2_1_0); + + case AUX_ADC_B1: + _ad9862_regs.select_b = ad9862_regs_t::SELECT_B_AUX_ADC1; + this->send_reg(34); //start conversion and select mux + this->recv_reg(32); //read the value (2 bytes, 2 reads) + this->recv_reg(33); + return aux_adc_to_volts(_ad9862_regs.aux_adc_b1_9_2, _ad9862_regs.aux_adc_b1_1_0); + case AUX_ADC_B2: + _ad9862_regs.select_b = ad9862_regs_t::SELECT_B_AUX_ADC2; + this->send_reg(34); //start conversion and select mux + this->recv_reg(30); //read the value (2 bytes, 2 reads) + this->recv_reg(31); + return aux_adc_to_volts(_ad9862_regs.aux_adc_b2_9_2, _ad9862_regs.aux_adc_b2_1_0); + } + UHD_THROW_INVALID_CODE_PATH(); +} + +/*********************************************************************** + * Codec Control AUX DAC Methods + **********************************************************************/ +void b100_codec_ctrl_impl::write_aux_dac(aux_dac_t which, double volts){ + //special case for aux dac d (aka sigma delta word) + if (which == AUX_DAC_D){ + boost::uint16_t dac_word = uhd::clip(boost::math::iround(volts*0xfff/3.3), 0, 0xfff); + _ad9862_regs.sig_delt_11_4 = boost::uint8_t(dac_word >> 4); + _ad9862_regs.sig_delt_3_0 = boost::uint8_t(dac_word & 0xf); + this->send_reg(42); + this->send_reg(43); + return; + } + + //calculate the dac word for aux dac a, b, c + boost::uint8_t dac_word = uhd::clip(boost::math::iround(volts*0xff/3.3), 0, 0xff); + + //setup a lookup table for the aux dac params (reg ref, reg addr) + typedef boost::tuple<boost::uint8_t*, boost::uint8_t> dac_params_t; + uhd::dict<aux_dac_t, dac_params_t> aux_dac_to_params = boost::assign::map_list_of + (AUX_DAC_A, dac_params_t(&_ad9862_regs.aux_dac_a, 36)) + (AUX_DAC_B, dac_params_t(&_ad9862_regs.aux_dac_b, 37)) + (AUX_DAC_C, dac_params_t(&_ad9862_regs.aux_dac_c, 38)) + ; + + //set the aux dac register + UHD_ASSERT_THROW(aux_dac_to_params.has_key(which)); + boost::uint8_t *reg_ref, reg_addr; + boost::tie(reg_ref, reg_addr) = aux_dac_to_params[which]; + *reg_ref = dac_word; + this->send_reg(reg_addr); +} + +/*********************************************************************** + * Codec Control SPI Methods + **********************************************************************/ +void b100_codec_ctrl_impl::send_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_write_reg(addr); + UHD_LOGV(rarely) << "codec control write reg: " << std::hex << reg << std::endl; + _iface->transact_spi( + B100_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16, false /*no rb*/ + ); +} + +void b100_codec_ctrl_impl::recv_reg(boost::uint8_t addr){ + boost::uint32_t reg = _ad9862_regs.get_read_reg(addr); + UHD_LOGV(rarely) << "codec control read reg: " << std::hex << reg << std::endl; + boost::uint32_t ret = _iface->transact_spi( + B100_SPI_SS_AD9862, + spi_config_t::EDGE_RISE, + reg, 16, true /*rb*/ + ); + UHD_LOGV(rarely) << "codec control read ret: " << std::hex << boost::uint16_t(ret & 0xFF) << std::endl; + _ad9862_regs.set_reg(addr, boost::uint8_t(ret&0xff)); +} + +/*********************************************************************** + * Codec Control Make + **********************************************************************/ +b100_codec_ctrl::sptr b100_codec_ctrl::make(b100_iface::sptr iface){ + return sptr(new b100_codec_ctrl_impl(iface)); +} diff --git a/host/lib/usrp/b100/codec_ctrl.hpp b/host/lib/usrp/b100/codec_ctrl.hpp new file mode 100644 index 000000000..1bd579190 --- /dev/null +++ b/host/lib/usrp/b100/codec_ctrl.hpp @@ -0,0 +1,90 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_B100_CODEC_CTRL_HPP +#define INCLUDED_B100_CODEC_CTRL_HPP + +#include "b100_iface.hpp" +#include <uhd/types/ranges.hpp> +#include <boost/shared_ptr.hpp> +#include <boost/utility.hpp> + +/*! + * The usrp-e codec control: + * - Init/power down codec. + * - Read aux adc, write aux dac. + */ +class b100_codec_ctrl : boost::noncopyable{ +public: + typedef boost::shared_ptr<b100_codec_ctrl> sptr; + + static const uhd::gain_range_t tx_pga_gain_range; + static const uhd::gain_range_t rx_pga_gain_range; + + /*! + * Make a new codec control object. + * \param iface the usrp_e iface object + * \return the codec control object + */ + static sptr make(b100_iface::sptr iface); + + //! aux adc identifier constants + enum aux_adc_t{ + AUX_ADC_A2 = 0xA2, + AUX_ADC_A1 = 0xA1, + AUX_ADC_B2 = 0xB2, + AUX_ADC_B1 = 0xB1 + }; + + /*! + * Read an auxiliary adc: + * The internals remember which aux adc was read last. + * Therefore, the aux adc switch is only changed as needed. + * \param which which of the 4 adcs + * \return a value in volts + */ + virtual double read_aux_adc(aux_adc_t which) = 0; + + //! aux dac identifier constants + enum aux_dac_t{ + AUX_DAC_A = 0xA, + AUX_DAC_B = 0xB, + AUX_DAC_C = 0xC, + AUX_DAC_D = 0xD //really the sigma delta output + }; + + /*! + * Write an auxiliary dac. + * \param which which of the 4 dacs + * \param volts the level in in volts + */ + virtual void write_aux_dac(aux_dac_t which, double volts) = 0; + + //! Set the TX PGA gain + virtual void set_tx_pga_gain(double gain) = 0; + + //! Get the TX PGA gain + virtual double get_tx_pga_gain(void) = 0; + + //! Set the RX PGA gain ('A' or 'B') + virtual void set_rx_pga_gain(double gain, char which) = 0; + + //! Get the RX PGA gain ('A' or 'B') + virtual double get_rx_pga_gain(char which) = 0; +}; + +#endif /* INCLUDED_B100_CODEC_CTRL_HPP */ diff --git a/host/lib/usrp/b100/codec_impl.cpp b/host/lib/usrp/b100/codec_impl.cpp new file mode 100644 index 000000000..de3ca3a66 --- /dev/null +++ b/host/lib/usrp/b100/codec_impl.cpp @@ -0,0 +1,149 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/codec_props.hpp> +#include <boost/bind.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Helper Methods + **********************************************************************/ +void b100_impl::codec_init(void){ + //make proxies + _rx_codec_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::rx_codec_get, this, _1, _2), + boost::bind(&b100_impl::rx_codec_set, this, _1, _2) + ); + _tx_codec_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::tx_codec_get, this, _1, _2), + boost::bind(&b100_impl::tx_codec_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Codec Properties + **********************************************************************/ +static const std::string ad9862_pga_gain_name = "ad9862 pga"; + +void b100_impl::rx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("b100 adc - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = b100_codec_ctrl::rx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_rx_pga_gain('B'); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void b100_impl::rx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<double>(), 'A'); + return; + + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_rx_pga_gain(val.as<double>(), 'B'); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Codec Properties + **********************************************************************/ +void b100_impl::tx_codec_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_NAME: + val = std::string("b100 dac - ad9522"); + return; + + case CODEC_PROP_OTHERS: + val = prop_names_t(); + return; + + case CODEC_PROP_GAIN_NAMES: + val = prop_names_t(1, ad9862_pga_gain_name); + return; + + case CODEC_PROP_GAIN_RANGE: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = b100_codec_ctrl::tx_pga_gain_range; + return; + + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + val = _codec_ctrl->get_tx_pga_gain(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +void b100_impl::tx_codec_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the set request conditioned on the key + switch(key.as<codec_prop_t>()){ + case CODEC_PROP_GAIN_I: //only one gain for I and Q + case CODEC_PROP_GAIN_Q: + UHD_ASSERT_THROW(key.name == ad9862_pga_gain_name); + _codec_ctrl->set_tx_pga_gain(val.as<double>()); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/b100/ctrl_packet.hpp b/host/lib/usrp/b100/ctrl_packet.hpp new file mode 100644 index 000000000..f504fc5aa --- /dev/null +++ b/host/lib/usrp/b100/ctrl_packet.hpp @@ -0,0 +1,75 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#ifndef INCLUDED_CTRL_PACKET_HPP +#define INCLUDED_CTRL_PACKET_HPP + +#include <uhd/config.hpp> +#include <boost/cstdint.hpp> +#include <uhd/types/serial.hpp> + +typedef std::vector<boost::uint16_t> ctrl_data_t; + +/*! + * Control packet operation type + */ +enum ctrl_pkt_op_t { + CTRL_PKT_OP_WRITE = 1, + CTRL_PKT_OP_READ = 2, + CTRL_PKT_OP_READBACK = 3 +}; + +/*! + * Control packet transaction length + */ +const size_t CTRL_PACKET_LENGTH = 32; +const size_t CTRL_PACKET_HEADER_LENGTH = 8; +const size_t CTRL_PACKET_DATA_LENGTH = 24; //=length-header + +/*! + * Control packet header magic value + */ +const boost::uint8_t CTRL_PACKET_HEADER_MAGIC = 0xAA; + +/*! + * Callback triggers for readback operation + */ +//FIXME: these are not real numbers, callbacks aren't implemented yet +const boost::uint16_t CTRL_PACKET_CALLBACK_SPI = 0x0001; +const boost::uint16_t CTRL_PACKET_CALLBACK_I2C = 0x0002; +//and so on + +/*! + * Metadata structure to describe a control packet + */ +struct UHD_API ctrl_pkt_meta_t { + ctrl_pkt_op_t op; + boost::uint8_t callbacks; + boost::uint8_t seq; + boost::uint16_t len; + boost::uint32_t addr; +}; + +/*! + * Full control packet structure + */ +struct UHD_API ctrl_pkt_t { + ctrl_pkt_meta_t pkt_meta; + ctrl_data_t data; +}; + +#endif /* INCLUDED_CTRL_PACKET_HPP */ diff --git a/host/lib/usrp/b100/dboard_iface.cpp b/host/lib/usrp/b100/dboard_iface.cpp new file mode 100644 index 000000000..ec3da6220 --- /dev/null +++ b/host/lib/usrp/b100/dboard_iface.cpp @@ -0,0 +1,298 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_iface.hpp" +#include "b100_regs.hpp" +#include "clock_ctrl.hpp" +#include "codec_ctrl.hpp" +#include <uhd/usrp/dboard_iface.hpp> +#include <uhd/types/dict.hpp> +#include <uhd/exception.hpp> +#include <boost/assign/list_of.hpp> + + +using namespace uhd; +using namespace uhd::usrp; +using namespace boost::assign; + +class b100_dboard_iface : public dboard_iface{ +public: + + b100_dboard_iface( + b100_iface::sptr iface, + b100_clock_ctrl::sptr clock, + b100_codec_ctrl::sptr codec + ){ + _iface = iface; + _clock = clock; + _codec = codec; + + //init the clock rate shadows + this->set_clock_rate(UNIT_RX, _clock->get_fpga_clock_rate()); + this->set_clock_rate(UNIT_TX, _clock->get_fpga_clock_rate()); + + _iface->poke16(B100_REG_GPIO_RX_DBG, 0); + _iface->poke16(B100_REG_GPIO_TX_DBG, 0); + } + + ~b100_dboard_iface(void){ + /* NOP */ + } + + special_props_t get_special_props(void){ + special_props_t props; + props.soft_clock_divider = false; + props.mangle_i2c_addrs = false; + return props; + } + + void write_aux_dac(unit_t, aux_dac_t, double); + double read_aux_adc(unit_t, aux_adc_t); + + void _set_pin_ctrl(unit_t, boost::uint16_t); + void _set_atr_reg(unit_t, atr_reg_t, boost::uint16_t); + void _set_gpio_ddr(unit_t, boost::uint16_t); + void _set_gpio_out(unit_t, boost::uint16_t); + void set_gpio_debug(unit_t, int); + boost::uint16_t read_gpio(unit_t); + + void write_i2c(boost::uint8_t, const byte_vector_t &); + byte_vector_t read_i2c(boost::uint8_t, size_t); + + void write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + boost::uint32_t read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ); + + void set_clock_rate(unit_t, double); + std::vector<double> get_clock_rates(unit_t); + double get_clock_rate(unit_t); + void set_clock_enabled(unit_t, bool); + double get_codec_rate(unit_t); + +private: + b100_iface::sptr _iface; + b100_clock_ctrl::sptr _clock; + b100_codec_ctrl::sptr _codec; + uhd::dict<unit_t, double> _clock_rates; +}; + +/*********************************************************************** + * Make Function + **********************************************************************/ +dboard_iface::sptr make_b100_dboard_iface( + b100_iface::sptr iface, + b100_clock_ctrl::sptr clock, + b100_codec_ctrl::sptr codec +){ + return dboard_iface::sptr(new b100_dboard_iface(iface, clock, codec)); +} + +/*********************************************************************** + * Clock Rates + **********************************************************************/ +void b100_dboard_iface::set_clock_rate(unit_t unit, double rate){ + _clock_rates[unit] = rate; + switch(unit){ + case UNIT_RX: return _clock->set_rx_dboard_clock_rate(rate); + case UNIT_TX: return _clock->set_tx_dboard_clock_rate(rate); + } +} + +std::vector<double> b100_dboard_iface::get_clock_rates(unit_t unit){ + switch(unit){ + case UNIT_RX: return _clock->get_rx_dboard_clock_rates(); + case UNIT_TX: return _clock->get_tx_dboard_clock_rates(); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +double b100_dboard_iface::get_clock_rate(unit_t unit){ + return _clock_rates[unit]; +} + +void b100_dboard_iface::set_clock_enabled(unit_t unit, bool enb){ + switch(unit){ + case UNIT_RX: return _clock->enable_rx_dboard_clock(enb); + case UNIT_TX: return _clock->enable_tx_dboard_clock(enb); + } +} + +double b100_dboard_iface::get_codec_rate(unit_t){ + return _clock->get_fpga_clock_rate(); +} + +/*********************************************************************** + * GPIO + **********************************************************************/ +void b100_dboard_iface::_set_pin_ctrl(unit_t unit, boost::uint16_t value){ + UHD_ASSERT_THROW(GPIO_SEL_ATR == 1); //make this assumption + switch(unit){ + case UNIT_RX: _iface->poke16(B100_REG_GPIO_RX_SEL, value); return; + case UNIT_TX: _iface->poke16(B100_REG_GPIO_TX_SEL, value); return; + } +} + +void b100_dboard_iface::_set_gpio_ddr(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(B100_REG_GPIO_RX_DDR, value); return; + case UNIT_TX: _iface->poke16(B100_REG_GPIO_TX_DDR, value); return; + } +} + +void b100_dboard_iface::_set_gpio_out(unit_t unit, boost::uint16_t value){ + switch(unit){ + case UNIT_RX: _iface->poke16(B100_REG_GPIO_RX_IO, value); return; + case UNIT_TX: _iface->poke16(B100_REG_GPIO_TX_IO, value); return; + } +} + +boost::uint16_t b100_dboard_iface::read_gpio(unit_t unit){ + switch(unit){ + case UNIT_RX: return _iface->peek16(B100_REG_GPIO_RX_IO); + case UNIT_TX: return _iface->peek16(B100_REG_GPIO_TX_IO); + default: UHD_THROW_INVALID_CODE_PATH(); + } +} + +void b100_dboard_iface::_set_atr_reg(unit_t unit, atr_reg_t atr, boost::uint16_t value){ + //define mapping of unit to atr regs to register address + static const uhd::dict< + unit_t, uhd::dict<atr_reg_t, boost::uint32_t> + > unit_to_atr_to_addr = map_list_of + (UNIT_RX, map_list_of + (ATR_REG_IDLE, B100_REG_ATR_IDLE_RXSIDE) + (ATR_REG_TX_ONLY, B100_REG_ATR_INTX_RXSIDE) + (ATR_REG_RX_ONLY, B100_REG_ATR_INRX_RXSIDE) + (ATR_REG_FULL_DUPLEX, B100_REG_ATR_FULL_RXSIDE) + ) + (UNIT_TX, map_list_of + (ATR_REG_IDLE, B100_REG_ATR_IDLE_TXSIDE) + (ATR_REG_TX_ONLY, B100_REG_ATR_INTX_TXSIDE) + (ATR_REG_RX_ONLY, B100_REG_ATR_INRX_TXSIDE) + (ATR_REG_FULL_DUPLEX, B100_REG_ATR_FULL_TXSIDE) + ) + ; + _iface->poke16(unit_to_atr_to_addr[unit][atr], value); +} + +void b100_dboard_iface::set_gpio_debug(unit_t unit, int which){ + //set this unit to all outputs + this->set_gpio_ddr(unit, 0xffff); + + //calculate the debug selections + boost::uint32_t dbg_sels = 0x0; + int sel = (which == 0)? GPIO_SEL_DEBUG_0 : GPIO_SEL_DEBUG_1; + for(size_t i = 0; i < 16; i++) dbg_sels |= sel << i; + + //set the debug on and which debug selection + switch(unit){ + case UNIT_RX: + _iface->poke16(B100_REG_GPIO_RX_DBG, 0xffff); + _iface->poke16(B100_REG_GPIO_RX_SEL, dbg_sels); + return; + + case UNIT_TX: + _iface->poke16(B100_REG_GPIO_TX_DBG, 0xffff); + _iface->poke16(B100_REG_GPIO_TX_SEL, dbg_sels); + return; + } +} + +/*********************************************************************** + * SPI + **********************************************************************/ +/*! + * Static function to convert a unit type to a spi slave device number. + * \param unit the dboard interface unit type enum + * \return the slave device number + */ +static boost::uint32_t unit_to_otw_spi_dev(dboard_iface::unit_t unit){ + switch(unit){ + case dboard_iface::UNIT_TX: return B100_SPI_SS_TX_DB; + case dboard_iface::UNIT_RX: return B100_SPI_SS_RX_DB; + } + throw std::invalid_argument("unknown unit type"); +} + +void b100_dboard_iface::write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, false /*no rb*/); +} + +boost::uint32_t b100_dboard_iface::read_write_spi( + unit_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits +){ + return _iface->transact_spi(unit_to_otw_spi_dev(unit), config, data, num_bits, true /*rb*/); +} + +/*********************************************************************** + * I2C + **********************************************************************/ +void b100_dboard_iface::write_i2c(boost::uint8_t addr, const byte_vector_t &bytes){ + return _iface->write_i2c(addr, bytes); +} + +byte_vector_t b100_dboard_iface::read_i2c(boost::uint8_t addr, size_t num_bytes){ + return _iface->read_i2c(addr, num_bytes); +} + +/*********************************************************************** + * Aux DAX/ADC + **********************************************************************/ +void b100_dboard_iface::write_aux_dac(dboard_iface::unit_t, aux_dac_t which, double value){ + //same aux dacs for each unit + static const uhd::dict<aux_dac_t, b100_codec_ctrl::aux_dac_t> which_to_aux_dac = map_list_of + (AUX_DAC_A, b100_codec_ctrl::AUX_DAC_A) + (AUX_DAC_B, b100_codec_ctrl::AUX_DAC_B) + (AUX_DAC_C, b100_codec_ctrl::AUX_DAC_C) + (AUX_DAC_D, b100_codec_ctrl::AUX_DAC_D) + ; + _codec->write_aux_dac(which_to_aux_dac[which], value); +} + +double b100_dboard_iface::read_aux_adc(dboard_iface::unit_t unit, aux_adc_t which){ + static const uhd::dict< + unit_t, uhd::dict<aux_adc_t, b100_codec_ctrl::aux_adc_t> + > unit_to_which_to_aux_adc = map_list_of + (UNIT_RX, map_list_of + (AUX_ADC_A, b100_codec_ctrl::AUX_ADC_A1) + (AUX_ADC_B, b100_codec_ctrl::AUX_ADC_B1) + ) + (UNIT_TX, map_list_of + (AUX_ADC_A, b100_codec_ctrl::AUX_ADC_A2) + (AUX_ADC_B, b100_codec_ctrl::AUX_ADC_B2) + ) + ; + return _codec->read_aux_adc(unit_to_which_to_aux_adc[unit][which]); +} diff --git a/host/lib/usrp/b100/dboard_impl.cpp b/host/lib/usrp/b100/dboard_impl.cpp new file mode 100644 index 000000000..ba3776728 --- /dev/null +++ b/host/lib/usrp/b100/dboard_impl.cpp @@ -0,0 +1,185 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include "b100_regs.hpp" +#include <uhd/exception.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/usrp/misc_utils.hpp> +#include <boost/bind.hpp> +#include "usrp_i2c_addr.h" + +using namespace uhd; +using namespace uhd::usrp; + +/*********************************************************************** + * Dboard Initialization + **********************************************************************/ +void b100_impl::dboard_init(void){ + //read the tx and rx dboard eeproms + _rx_db_eeprom.load(*_iface, I2C_ADDR_RX_A); + _tx_db_eeprom.load(*_iface, I2C_ADDR_TX_A); + _gdb_eeprom.load(*_iface, I2C_ADDR_TX_A ^ 5); + + //create a new dboard interface and manager + _dboard_iface = make_b100_dboard_iface( + _iface, _clock_ctrl, _codec_ctrl + ); + _dboard_manager = dboard_manager::make( + _rx_db_eeprom.id, + ((_gdb_eeprom.id == dboard_id_t::none())? _tx_db_eeprom : _gdb_eeprom).id, + _dboard_iface + ); + + //setup the dboard proxies + _rx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::rx_dboard_get, this, _1, _2), + boost::bind(&b100_impl::rx_dboard_set, this, _1, _2) + ); + _tx_dboard_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::tx_dboard_get, this, _1, _2), + boost::bind(&b100_impl::tx_dboard_set, this, _1, _2) + ); +} + +/*********************************************************************** + * RX Dboard Get + **********************************************************************/ +void b100_impl::rx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("b100 dboard (rx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_rx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_rx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _rx_db_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _rx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _rx_db_eeprom.id, + _dboard_manager->get_rx_subdev(key.name), + _rx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_RX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX Dboard Set + **********************************************************************/ +void b100_impl::rx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_EEPROM: + _rx_db_eeprom = val.as<dboard_eeprom_t>(); + _rx_db_eeprom.store(*_iface, I2C_ADDR_RX_A); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Get + **********************************************************************/ +void b100_impl::tx_dboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_NAME: + val = std::string("b100 dboard (tx unit)"); + return; + + case DBOARD_PROP_SUBDEV: + val = _dboard_manager->get_tx_subdev(key.name); + return; + + case DBOARD_PROP_SUBDEV_NAMES: + val = _dboard_manager->get_tx_subdev_names(); + return; + + case DBOARD_PROP_DBOARD_EEPROM: + val = _tx_db_eeprom; + return; + + case DBOARD_PROP_GBOARD_EEPROM: + val = _gdb_eeprom; + return; + + case DBOARD_PROP_DBOARD_IFACE: + val = _dboard_iface; + return; + + case DBOARD_PROP_CODEC: + val = _tx_codec_proxy->get_link(); + return; + + case DBOARD_PROP_GAIN_GROUP: + val = make_gain_group( + _tx_db_eeprom.id, + _dboard_manager->get_tx_subdev(key.name), + _tx_codec_proxy->get_link(), + GAIN_GROUP_POLICY_TX + ); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX Dboard Set + **********************************************************************/ +void b100_impl::tx_dboard_set(const wax::obj &key, const wax::obj &val){ + switch(key.as<dboard_prop_t>()){ + case DBOARD_PROP_DBOARD_EEPROM: + _tx_db_eeprom = val.as<dboard_eeprom_t>(); + _tx_db_eeprom.store(*_iface, I2C_ADDR_TX_A); + return; + + case DBOARD_PROP_GBOARD_EEPROM: + _gdb_eeprom = val.as<dboard_eeprom_t>(); + _gdb_eeprom.store(*_iface, I2C_ADDR_TX_A ^ 5); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/b100/dsp_impl.cpp b/host/lib/usrp/b100/dsp_impl.cpp new file mode 100644 index 000000000..c1bf6bedd --- /dev/null +++ b/host/lib/usrp/b100/dsp_impl.cpp @@ -0,0 +1,189 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include "b100_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/bind.hpp> + +#define rint boost::math::iround + +using namespace uhd; +using namespace uhd::usrp; + +static const double MASTER_CLOCK_RATE = 64e6; //TODO get from clock control + +/*********************************************************************** + * RX DDC Initialization + **********************************************************************/ +void b100_impl::rx_ddc_init(void){ + _rx_ddc_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::rx_ddc_get, this, _1, _2), + boost::bind(&b100_impl::rx_ddc_set, this, _1, _2) + ); + + //initial config and update + rx_ddc_set(DSP_PROP_FREQ_SHIFT, double(0)); + rx_ddc_set(DSP_PROP_HOST_RATE, double(16e6)); +} + +/*********************************************************************** + * RX DDC Get + **********************************************************************/ +void b100_impl::rx_ddc_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("USRP-B100 RX DSP"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _ddc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_ddc_decim; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * RX DDC Set + **********************************************************************/ +void b100_impl::rx_ddc_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_STREAM_CMD: + issue_stream_cmd(val.as<stream_cmd_t>()); + return; + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(B100_REG_DSP_RX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _ddc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + //set the decimation + _ddc_decim = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + _iface->poke32(B100_REG_DSP_RX_DECIM_RATE, dsp_type1::calc_cic_filter_word(_ddc_decim)); + + //set the scaling + static const boost::int16_t default_rx_scale_iq = 1024; + _iface->poke32(B100_REG_DSP_RX_SCALE_IQ, + dsp_type1::calc_iq_scale_word(default_rx_scale_iq, default_rx_scale_iq) + ); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Initialization + **********************************************************************/ +void b100_impl::tx_duc_init(void){ + _tx_duc_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::tx_duc_get, this, _1, _2), + boost::bind(&b100_impl::tx_duc_set, this, _1, _2) + ); + + //initial config and update + tx_duc_set(DSP_PROP_FREQ_SHIFT, double(0)); + tx_duc_set(DSP_PROP_HOST_RATE, double(16e6)); +} + +/*********************************************************************** + * TX DUC Get + **********************************************************************/ +void b100_impl::tx_duc_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + case DSP_PROP_NAME: + val = std::string("USRP-B100 TX DSP"); + return; + + case DSP_PROP_OTHERS: + val = prop_names_t(); //empty + return; + + case DSP_PROP_FREQ_SHIFT: + val = _duc_freq; + return; + + case DSP_PROP_CODEC_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + case DSP_PROP_HOST_RATE: + val = _clock_ctrl->get_fpga_clock_rate()/_duc_interp; + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * TX DUC Set + **********************************************************************/ +void b100_impl::tx_duc_set(const wax::obj &key_, const wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + switch(key.as<dsp_prop_t>()){ + + case DSP_PROP_FREQ_SHIFT:{ + double new_freq = val.as<double>(); + _iface->poke32(B100_REG_DSP_TX_FREQ, + dsp_type1::calc_cordic_word_and_update(new_freq, _clock_ctrl->get_fpga_clock_rate()) + ); + _duc_freq = new_freq; //shadow + } + return; + + case DSP_PROP_HOST_RATE:{ + _duc_interp = rint(_clock_ctrl->get_fpga_clock_rate()/val.as<double>()); + + //set the interpolation + _iface->poke32(B100_REG_DSP_TX_INTERP_RATE, dsp_type1::calc_cic_filter_word(_duc_interp)); + + //set the scaling + _iface->poke32(B100_REG_DSP_TX_SCALE_IQ, dsp_type1::calc_iq_scale_word(_duc_interp)); + } + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} diff --git a/host/lib/usrp/b100/io_impl.cpp b/host/lib/usrp/b100/io_impl.cpp new file mode 100644 index 000000000..3978bea75 --- /dev/null +++ b/host/lib/usrp/b100/io_impl.cpp @@ -0,0 +1,210 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "../../transport/super_recv_packet_handler.hpp" +#include "../../transport/super_send_packet_handler.hpp" +#include "usrp_commands.h" +#include "b100_impl.hpp" +#include "b100_regs.hpp" +#include <uhd/usrp/dsp_utils.hpp> +#include <uhd/usrp/dsp_props.hpp> +#include <uhd/utils/thread_priority.hpp> +#include <uhd/transport/bounded_buffer.hpp> +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <boost/asio.hpp> +#include <boost/bind.hpp> +#include <boost/thread.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/utils/log.hpp> +#include <iostream> + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; +namespace asio = boost::asio; + +/*********************************************************************** + * IO Implementation Details + **********************************************************************/ +struct b100_impl::io_impl{ + io_impl(zero_copy_if::sptr data_transport): + data_transport(data_transport) + { + /* NOP */ + } + + ~io_impl(void){ + //drain the rx buffs + //while(data_transport->get_recv_buff().get() != NULL){ + /* NOP */ + //} + } + + zero_copy_if::sptr &data_transport; + + sph::recv_packet_handler recv_handler; + sph::send_packet_handler send_handler; + bool continuous_streaming; +}; + +/*********************************************************************** + * Initialize internals within this file + **********************************************************************/ +void b100_impl::io_init(void){ + _recv_otw_type.width = 16; + _recv_otw_type.shift = 0; + _recv_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _send_otw_type.width = 16; + _send_otw_type.shift = 0; + _send_otw_type.byteorder = otw_type_t::BO_LITTLE_ENDIAN; + + _iface->reset_gpif(6); + + //reset state machines + _iface->poke32(B100_REG_CTRL_TX_CLEAR_UNDERRUN, 0); + _iface->poke32(B100_REG_CTRL_RX_CLEAR_OVERRUN, 0); + + _io_impl = UHD_PIMPL_MAKE(io_impl, (_data_transport)); + + //setup rx data path + _iface->poke32(B100_REG_CTRL_RX_NSAMPS_PER_PKT, get_max_recv_samps_per_packet()); + UHD_LOGV(always) << "IO: Using " << get_max_recv_samps_per_packet() << " samples per packet" << std::endl; + _iface->poke32(B100_REG_CTRL_RX_NCHANNELS, 1); + _iface->poke32(B100_REG_CTRL_RX_VRT_HEADER, 0 + | (0x1 << 28) //if data with stream id + | (0x1 << 26) //has trailer + | (0x3 << 22) //integer time other + | (0x1 << 20) //fractional time sample count + ); + _iface->poke32(B100_REG_CTRL_RX_VRT_TRAILER, 0); + + //set the streamid to reset the seq num + _iface->poke32(B100_REG_CTRL_TX_REPORT_SID, 0); + //setup the tx policy + _iface->poke32(B100_REG_CTRL_TX_POLICY, B100_FLAG_CTRL_TX_POLICY_NEXT_PACKET); + + //set the expected packet size in USB frames + _iface->poke32(B100_REG_MISC_RX_LEN, 4); + + update_transport_channel_mapping(); +} + +void b100_impl::update_transport_channel_mapping(void){ + if (_io_impl.get() == NULL) return; //not inited yet + + //set all of the relevant properties on the handler + boost::mutex::scoped_lock recv_lock = _io_impl->recv_handler.get_scoped_lock(); + _io_impl->recv_handler.resize(_rx_subdev_spec.size()); + _io_impl->recv_handler.set_vrt_unpacker(&vrt::if_hdr_unpack_le); + _io_impl->recv_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); + _io_impl->recv_handler.set_samp_rate(_rx_ddc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + for (size_t chan = 0; chan < _io_impl->recv_handler.size(); chan++){ + _io_impl->recv_handler.set_xport_chan_get_buff(chan, boost::bind( + &uhd::transport::zero_copy_if::get_recv_buff, _io_impl->data_transport, _1 + )); + _io_impl->recv_handler.set_overflow_handler(chan, boost::bind( + &b100_impl::handle_overrun, this, chan + )); + } + _io_impl->recv_handler.set_converter(_recv_otw_type); + + //set all of the relevant properties on the handler + boost::mutex::scoped_lock send_lock = _io_impl->send_handler.get_scoped_lock(); + _io_impl->send_handler.resize(_tx_subdev_spec.size()); + _io_impl->send_handler.set_vrt_packer(&vrt::if_hdr_pack_le); + _io_impl->send_handler.set_tick_rate(_clock_ctrl->get_fpga_clock_rate()); + _io_impl->send_handler.set_samp_rate(_tx_duc_proxy->get_link()[DSP_PROP_HOST_RATE].as<double>()); + for (size_t chan = 0; chan < _io_impl->send_handler.size(); chan++){ + _io_impl->send_handler.set_xport_chan_get_buff(chan, boost::bind( + &uhd::transport::zero_copy_if::get_send_buff, _io_impl->data_transport, _1 + )); + } + _io_impl->send_handler.set_converter(_send_otw_type); + _io_impl->send_handler.set_max_samples_per_packet(get_max_send_samps_per_packet()); +} + +/*********************************************************************** + * Data send + helper functions + **********************************************************************/ +size_t b100_impl::get_max_send_samps_per_packet(void) const { + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + static const size_t bpp = 2048 - hdr_size; + return bpp / _send_otw_type.get_sample_size(); +} + +size_t b100_impl::send( + const send_buffs_type &buffs, size_t nsamps_per_buff, + const tx_metadata_t &metadata, const io_type_t &io_type, + send_mode_t send_mode, double timeout +){ + return _io_impl->send_handler.send( + buffs, nsamps_per_buff, + metadata, io_type, + send_mode, timeout + ); +} + +/*********************************************************************** + * Data recv + helper functions + **********************************************************************/ + +size_t b100_impl::get_max_recv_samps_per_packet(void) const { + static const size_t hdr_size = 0 + + vrt::max_if_hdr_words32*sizeof(boost::uint32_t) + + sizeof(vrt::if_packet_info_t().tlr) //forced to have trailer + - sizeof(vrt::if_packet_info_t().cid) //no class id ever used + ; + size_t bpp = 2048 - hdr_size; //limited by FPGA pkt buffer size + return bpp/_recv_otw_type.get_sample_size(); +} + +size_t b100_impl::recv( + const recv_buffs_type &buffs, size_t nsamps_per_buff, + rx_metadata_t &metadata, const io_type_t &io_type, + recv_mode_t recv_mode, double timeout +){ + return _io_impl->recv_handler.recv( + buffs, nsamps_per_buff, + metadata, io_type, + recv_mode, timeout + ); +} + +void b100_impl::issue_stream_cmd(const stream_cmd_t &stream_cmd) +{ + _io_impl->continuous_streaming = (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + _iface->poke32(B100_REG_CTRL_RX_STREAM_CMD, dsp_type1::calc_stream_cmd_word(stream_cmd)); + _iface->poke32(B100_REG_CTRL_RX_TIME_SECS, boost::uint32_t(stream_cmd.time_spec.get_full_secs())); + _iface->poke32(B100_REG_CTRL_RX_TIME_TICKS, stream_cmd.time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + + if (stream_cmd.stream_mode == stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS) { + while(_io_impl->data_transport->get_recv_buff().get() != NULL){ + /* NOP */ + } + } +} + +void b100_impl::handle_overrun(size_t){ + if (_io_impl->continuous_streaming){ + this->issue_stream_cmd(stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + } +} diff --git a/host/lib/usrp/b100/mboard_impl.cpp b/host/lib/usrp/b100/mboard_impl.cpp new file mode 100644 index 000000000..c651ff2a2 --- /dev/null +++ b/host/lib/usrp/b100/mboard_impl.cpp @@ -0,0 +1,246 @@ +// +// Copyright 2010 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include "usrp_commands.h" +#include "fpga_regs_standard.h" +#include "fpga_regs_common.h" +#include "b100_regs.hpp" +#include "usrp_i2c_addr.h" +#include <uhd/usrp/misc_utils.hpp> +#include <uhd/usrp/mboard_props.hpp> +#include <uhd/usrp/dboard_props.hpp> +#include <uhd/usrp/subdev_props.hpp> +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/images.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <boost/thread/thread.hpp> +#include <uhd/usrp/dsp_utils.hpp> + +using namespace uhd; +using namespace uhd::usrp; + +static const bool b100_mboard_verbose = true; + +/*********************************************************************** + * Mboard Initialization + **********************************************************************/ +void b100_impl::mboard_init(void) +{ + _mboard_proxy = wax_obj_proxy::make( + boost::bind(&b100_impl::mboard_get, this, _1, _2), + boost::bind(&b100_impl::mboard_set, this, _1, _2)); + + //set the ticks per seconds into the vita time control + _iface->poke32(B100_REG_TIME64_TPS, + boost::uint32_t(_clock_ctrl->get_fpga_clock_rate()) + ); + + //init the clock config + _clock_config = clock_config_t::internal(); + update_clock_config(); +} + +void b100_impl::update_clock_config(void){ + boost::uint32_t pps_flags = 0; + + //translate pps polarity enums + switch(_clock_config.pps_polarity){ + case clock_config_t::PPS_POS: pps_flags |= B100_FLAG_TIME64_PPS_POSEDGE; break; + case clock_config_t::PPS_NEG: pps_flags |= B100_FLAG_TIME64_PPS_NEGEDGE; break; + default: throw uhd::runtime_error("unhandled clock configuration pps polarity"); + } + + //set the pps flags + _iface->poke32(B100_REG_TIME64_FLAGS, pps_flags); + + //clock source ref 10mhz + switch(_clock_config.ref_source){ + case clock_config_t::REF_AUTO: _clock_ctrl->use_auto_ref(); break; + case clock_config_t::REF_INT: _clock_ctrl->use_internal_ref(); break; + case clock_config_t::REF_SMA: _clock_ctrl->use_auto_ref(); break; + default: throw uhd::runtime_error("unhandled clock configuration ref source"); + } +} + +/*********************************************************************** + * Mboard Get + **********************************************************************/ +void b100_impl::mboard_get(const wax::obj &key_, wax::obj &val){ + named_prop_t key = named_prop_t::extract(key_); + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_NAME: + val = std::string("USRP-B100 mboard"); + return; + + case MBOARD_PROP_OTHERS: + val = prop_names_t(); + return; + + case MBOARD_PROP_RX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_TX_DBOARD: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_dboard_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DBOARD_NAMES: + val = prop_names_t(1, ""); //vector of size 1 with empty string + return; + + case MBOARD_PROP_RX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _rx_ddc_proxy->get_link(); + return; + + case MBOARD_PROP_RX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_TX_DSP: + UHD_ASSERT_THROW(key.name == ""); + val = _tx_duc_proxy->get_link(); + return; + + case MBOARD_PROP_TX_DSP_NAMES: + val = prop_names_t(1, ""); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + val = _clock_config; + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + val = _rx_subdev_spec; + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + val = _tx_subdev_spec; + return; + + case MBOARD_PROP_EEPROM_MAP: + val = _iface->mb_eeprom; + return; + + case MBOARD_PROP_TIME_NOW:while(true){ + uint32_t secs = _iface->peek32(B100_REG_RB_TIME_NOW_SECS); + uint32_t ticks = _iface->peek32(B100_REG_RB_TIME_NOW_TICKS); + if (secs != _iface->peek32(B100_REG_RB_TIME_NOW_SECS)) continue; + val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); + return; + } + + case MBOARD_PROP_TIME_PPS: while(true){ + uint32_t secs = _iface->peek32(B100_REG_RB_TIME_PPS_SECS); + uint32_t ticks = _iface->peek32(B100_REG_RB_TIME_PPS_TICKS); + if (secs != _iface->peek32(B100_REG_RB_TIME_PPS_SECS)) continue; + val = time_spec_t(secs, ticks, _clock_ctrl->get_fpga_clock_rate()); + return; + } + + case MBOARD_PROP_CLOCK_RATE: + val = _clock_ctrl->get_fpga_clock_rate(); + return; + + default: UHD_THROW_PROP_GET_ERROR(); + } +} + +/*********************************************************************** + * Mboard Set + **********************************************************************/ +void b100_impl::mboard_set(const wax::obj &key, const wax::obj &val) +{ + if(key.type() == typeid(std::string)) { + if(key.as<std::string>() == "load_eeprom") { + std::string b100_eeprom_image = val.as<std::string>(); + UHD_MSG(status) << "B100 EEPROM image: " << b100_eeprom_image << std::endl; + _fx2_ctrl->usrp_load_eeprom(val.as<std::string>()); + } + return; + } + + //handle the get request conditioned on the key + switch(key.as<mboard_prop_t>()){ + case MBOARD_PROP_TIME_NOW: + case MBOARD_PROP_TIME_PPS:{ + time_spec_t time_spec = val.as<time_spec_t>(); + _iface->poke32(B100_REG_TIME64_TICKS, time_spec.get_tick_count(_clock_ctrl->get_fpga_clock_rate())); + boost::uint32_t imm_flags = (key.as<mboard_prop_t>() == MBOARD_PROP_TIME_NOW)? 1 : 0; + _iface->poke32(B100_REG_TIME64_IMM, imm_flags); + _iface->poke32(B100_REG_TIME64_SECS, boost::uint32_t(time_spec.get_full_secs())); + } + return; + + case MBOARD_PROP_RX_SUBDEV_SPEC: + _rx_subdev_spec = val.as<subdev_spec_t>(); + verify_rx_subdev_spec(_rx_subdev_spec, _mboard_proxy->get_link()); + UHD_ASSERT_THROW(_rx_subdev_spec.size() == 1); + //set the mux + _iface->poke32(B100_REG_DSP_RX_MUX, dsp_type1::calc_rx_mux_word( + _dboard_manager->get_rx_subdev(_rx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_TX_SUBDEV_SPEC: + _tx_subdev_spec = val.as<subdev_spec_t>(); + verify_tx_subdev_spec(_tx_subdev_spec, _mboard_proxy->get_link()); + UHD_ASSERT_THROW(_tx_subdev_spec.size() == 1); + //set the mux and set the number of tx channels + _iface->poke32(B100_REG_DSP_TX_MUX, dsp_type1::calc_tx_mux_word( + _dboard_manager->get_tx_subdev(_tx_subdev_spec.front().sd_name)[SUBDEV_PROP_CONNECTION].as<subdev_conn_t>() + )); + return; + + case MBOARD_PROP_EEPROM_MAP: + // Step1: commit the map, writing only those values set. + // Step2: readback the entire eeprom map into the iface. + val.as<mboard_eeprom_t>().commit(*_iface, mboard_eeprom_t::MAP_B000); + _iface->mb_eeprom = mboard_eeprom_t(*_iface, mboard_eeprom_t::MAP_B000); + return; + + case MBOARD_PROP_CLOCK_CONFIG: + _clock_config = val.as<clock_config_t>(); + update_clock_config(); + return; + + case MBOARD_PROP_CLOCK_RATE: + UHD_MSG(warning) + << "You are setting the master clock rate from the API.\n" + << "You may want to pass this into the device address as master_clock_rate=<rate>.\n" + << "This way, the clock rate is guaranteed to be initialized first.\n" + << "See the application notes for USRP-B100 for further instructions.\n" + ; + _clock_ctrl->set_fpga_clock_rate(val.as<double>()); + update_transport_channel_mapping(); + return; + + default: UHD_THROW_PROP_SET_ERROR(); + } +} |