diff options
Diffstat (limited to 'host/lib/usrp/b100/b100_impl.cpp')
| -rw-r--r-- | host/lib/usrp/b100/b100_impl.cpp | 485 |
1 files changed, 485 insertions, 0 deletions
diff --git a/host/lib/usrp/b100/b100_impl.cpp b/host/lib/usrp/b100/b100_impl.cpp new file mode 100644 index 000000000..89c9598b3 --- /dev/null +++ b/host/lib/usrp/b100/b100_impl.cpp @@ -0,0 +1,485 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include "b100_impl.hpp" +#include "b100_ctrl.hpp" +#include "fpga_regs_standard.h" +#include "usrp_i2c_addr.h" +#include "usrp_commands.h" +#include <uhd/transport/usb_control.hpp> +#include "ctrl_packet.hpp" +#include <uhd/utils/msg.hpp> +#include <uhd/exception.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/utils/images.hpp> +#include <uhd/utils/safe_call.hpp> +#include <boost/format.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/filesystem.hpp> +#include <boost/thread/thread.hpp> +#include <boost/lexical_cast.hpp> +#include "b100_regs.hpp" + +using namespace uhd; +using namespace uhd::usrp; +using namespace uhd::transport; + +const boost::uint16_t B100_VENDOR_ID = 0x2500; +const boost::uint16_t B100_PRODUCT_ID = 0x0001; +const boost::uint16_t FX2_VENDOR_ID = 0x04b4; +const boost::uint16_t FX2_PRODUCT_ID = 0x8613; + +/*********************************************************************** + * Discovery + **********************************************************************/ +static device_addrs_t b100_find(const device_addr_t &hint) +{ + device_addrs_t b100_addrs; + + //return an empty list of addresses when type is set to non-b100 + if (hint.has_key("type") and hint["type"] != "b100") return b100_addrs; + + //Return an empty list of addresses when an address is specified, + //since an address is intended for a different, non-USB, device. + if (hint.has_key("addr")) return b100_addrs; + + boost::uint16_t vid = hint.has_key("uninit") ? FX2_VENDOR_ID : B100_VENDOR_ID; + boost::uint16_t pid = hint.has_key("uninit") ? FX2_PRODUCT_ID : B100_PRODUCT_ID; + + // Important note: + // The get device list calls are nested inside the for loop. + // This allows the usb guts to decontruct when not in use, + // so that re-enumeration after fw load can occur successfully. + // This requirement is a courtesy of libusb1.0 on windows. + + //find the usrps and load firmware + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + //extract the firmware path for the b100 + std::string b100_fw_image; + try{ + b100_fw_image = find_image_path(hint.get("fw", B100_FW_FILE_NAME)); + } + catch(...){ + UHD_MSG(warning) << boost::format( + "Could not locate B100 firmware.\n" + "Please install the images package.\n" + ); + return b100_addrs; + } + UHD_LOG << "the firmware image: " << b100_fw_image << std::endl; + + usb_control::sptr control; + try{control = usb_control::make(handle);} + catch(const uhd::exception &){continue;} //ignore claimed + + fx2_ctrl::make(control)->usrp_load_firmware(b100_fw_image); + } + + //get descriptors again with serial number, but using the initialized VID/PID now since we have firmware + vid = B100_VENDOR_ID; + pid = B100_PRODUCT_ID; + + BOOST_FOREACH(usb_device_handle::sptr handle, usb_device_handle::get_device_list(vid, pid)) { + device_addr_t new_addr; + new_addr["type"] = "b100"; + new_addr["serial"] = handle->get_serial(); + + //Attempt to read the name from the EEPROM and perform filtering. + try{ + usb_control::sptr control = usb_control::make(handle); + fx2_ctrl::sptr fx2_ctrl = fx2_ctrl::make(control); + const mboard_eeprom_t mb_eeprom = mboard_eeprom_t(*fx2_ctrl, mboard_eeprom_t::MAP_B000); + new_addr["name"] = mb_eeprom["name"]; + } + catch(const uhd::exception &){ + //set these values as empty string so the device may still be found + //and the filter's below can still operate on the discovered device + new_addr["name"] = ""; + } + + //this is a found b100 when the hint serial and name match or blank + if ( + (not hint.has_key("name") or hint["name"] == new_addr["name"]) and + (not hint.has_key("serial") or hint["serial"] == new_addr["serial"]) + ){ + b100_addrs.push_back(new_addr); + } + } + + return b100_addrs; +} + +/*********************************************************************** + * Make + **********************************************************************/ +static device::sptr b100_make(const device_addr_t &device_addr){ + return device::sptr(new b100_impl(device_addr)); +} + +UHD_STATIC_BLOCK(register_b100_device){ + device::register_device(&b100_find, &b100_make); +} + +/*********************************************************************** + * Structors + **********************************************************************/ +b100_impl::b100_impl(const device_addr_t &device_addr){ + + //extract the FPGA path for the B100 + std::string b100_fpga_image = find_image_path( + device_addr.has_key("fpga")? device_addr["fpga"] : B100_FPGA_FILE_NAME + ); + + //try to match the given device address with something on the USB bus + std::vector<usb_device_handle::sptr> device_list = + usb_device_handle::get_device_list(B100_VENDOR_ID, B100_PRODUCT_ID); + + //locate the matching handle in the device list + usb_device_handle::sptr handle; + BOOST_FOREACH(usb_device_handle::sptr dev_handle, device_list) { + if (dev_handle->get_serial() == device_addr["serial"]){ + handle = dev_handle; + break; + } + } + UHD_ASSERT_THROW(handle.get() != NULL); //better be found + + //create control objects + usb_control::sptr fx2_transport = usb_control::make(handle); + _fx2_ctrl = fx2_ctrl::make(fx2_transport); + this->check_fw_compat(); //check after making fx2 + //-- setup clock after making fx2 and before loading fpga --// + _clock_ctrl = b100_clock_ctrl::make(_fx2_ctrl, device_addr.cast<double>("master_clock_rate", B100_DEFAULT_TICK_RATE)); + _fx2_ctrl->usrp_load_fpga(b100_fpga_image); + + //create the control transport + device_addr_t ctrl_xport_args; + ctrl_xport_args["recv_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); + ctrl_xport_args["num_recv_frames"] = "16"; + ctrl_xport_args["send_frame_size"] = boost::lexical_cast<std::string>(CTRL_PACKET_LENGTH); + ctrl_xport_args["num_send_frames"] = "4"; + + _ctrl_transport = usb_zero_copy::make( + handle, + 8, + 4, + ctrl_xport_args + ); + + //////////////////////////////////////////////////////////////////// + // Create controller objects + //////////////////////////////////////////////////////////////////// + _fpga_ctrl = b100_ctrl::make(_ctrl_transport); + this->enable_gpif(true); //TODO best place to put this? + this->check_fpga_compat(); //check after making control + + //////////////////////////////////////////////////////////////////// + // Reset buffers in data path + //////////////////////////////////////////////////////////////////// + _fpga_ctrl->poke32(B100_REG_GLOBAL_RESET, 0); + _fpga_ctrl->poke32(B100_REG_CLEAR_RX, 0); + _fpga_ctrl->poke32(B100_REG_CLEAR_TX, 0); + this->reset_gpif(6); + + //////////////////////////////////////////////////////////////////// + // Initialize peripherals after reset + //////////////////////////////////////////////////////////////////// + _fpga_i2c_ctrl = i2c_core_100::make(_fpga_ctrl, B100_REG_SLAVE(3)); + _fpga_spi_ctrl = spi_core_100::make(_fpga_ctrl, B100_REG_SLAVE(2)); + + //////////////////////////////////////////////////////////////////// + // Create data transport + // This happens after FPGA ctrl instantiated so any junk that might + // be in the FPGAs buffers doesn't get pulled into the transport + // before being cleared. + //////////////////////////////////////////////////////////////////// + device_addr_t data_xport_args; + data_xport_args["recv_frame_size"] = device_addr.get("recv_frame_size", "16384"); + data_xport_args["num_recv_frames"] = device_addr.get("num_recv_frames", "16"); + data_xport_args["send_frame_size"] = device_addr.get("send_frame_size", "16384"); + data_xport_args["num_send_frames"] = device_addr.get("num_send_frames", "16"); + + _data_transport = usb_zero_copy::make_wrapper( + usb_zero_copy::make( + handle, // identifier + 6, // IN endpoint + 2, // OUT endpoint + data_xport_args // param hints + ) + ); + + //////////////////////////////////////////////////////////////////// + // Initialize the properties tree + //////////////////////////////////////////////////////////////////// + _tree = property_tree::make(); + _tree->create<std::string>("/name").set("B-Series Device"); + const fs_path mb_path = "/mboards/0"; + _tree->create<std::string>(mb_path / "name").set("B100 (B-Hundo)"); + _tree->create<std::string>(mb_path / "load_eeprom") + .subscribe(boost::bind(&fx2_ctrl::usrp_load_eeprom, _fx2_ctrl, _1)); + + //////////////////////////////////////////////////////////////////// + // setup the mboard eeprom + //////////////////////////////////////////////////////////////////// + const mboard_eeprom_t mb_eeprom(*_fx2_ctrl, mboard_eeprom_t::MAP_B000); + _tree->create<mboard_eeprom_t>(mb_path / "eeprom") + .set(mb_eeprom) + .subscribe(boost::bind(&b100_impl::set_mb_eeprom, this, _1)); + + //////////////////////////////////////////////////////////////////// + // create clock control objects + //////////////////////////////////////////////////////////////////// + //^^^ clock created up top, just reg props here... ^^^ + _tree->create<double>(mb_path / "tick_rate") + .publish(boost::bind(&b100_clock_ctrl::get_fpga_clock_rate, _clock_ctrl)) + .subscribe(boost::bind(&b100_impl::update_tick_rate, this, _1)); + + //////////////////////////////////////////////////////////////////// + // create codec control objects + //////////////////////////////////////////////////////////////////// + _codec_ctrl = b100_codec_ctrl::make(_fpga_spi_ctrl); + const fs_path rx_codec_path = mb_path / "rx_codecs/A"; + const fs_path tx_codec_path = mb_path / "tx_codecs/A"; + _tree->create<std::string>(rx_codec_path / "name").set("ad9522"); + _tree->create<meta_range_t>(rx_codec_path / "gains/pga/range").set(b100_codec_ctrl::rx_pga_gain_range); + _tree->create<double>(rx_codec_path / "gains/pga/value") + .coerce(boost::bind(&b100_impl::update_rx_codec_gain, this, _1)); + _tree->create<std::string>(tx_codec_path / "name").set("ad9522"); + _tree->create<meta_range_t>(tx_codec_path / "gains/pga/range").set(b100_codec_ctrl::tx_pga_gain_range); + _tree->create<double>(tx_codec_path / "gains/pga/value") + .subscribe(boost::bind(&b100_codec_ctrl::set_tx_pga_gain, _codec_ctrl, _1)) + .publish(boost::bind(&b100_codec_ctrl::get_tx_pga_gain, _codec_ctrl)); + + //////////////////////////////////////////////////////////////////// + // and do the misc mboard sensors + //////////////////////////////////////////////////////////////////// + //none for now... + _tree->create<int>(mb_path / "sensors"); //phony property so this dir exists + + //////////////////////////////////////////////////////////////////// + // create frontend control objects + //////////////////////////////////////////////////////////////////// + _rx_fe = rx_frontend_core_200::make(_fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_FRONT)); + _tx_fe = tx_frontend_core_200::make(_fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TX_FRONT)); + //TODO lots of properties to expose here for frontends + _tree->create<subdev_spec_t>(mb_path / "rx_subdev_spec") + .subscribe(boost::bind(&b100_impl::update_rx_subdev_spec, this, _1)); + _tree->create<subdev_spec_t>(mb_path / "tx_subdev_spec") + .subscribe(boost::bind(&b100_impl::update_tx_subdev_spec, this, _1)); + + //////////////////////////////////////////////////////////////////// + // create rx dsp control objects + //////////////////////////////////////////////////////////////////// + _rx_dsps.push_back(rx_dsp_core_200::make( + _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_DSP0), B100_REG_SR_ADDR(B100_SR_RX_CTRL0), B100_RX_SID_BASE + 0 + )); + _rx_dsps.push_back(rx_dsp_core_200::make( + _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_RX_DSP1), B100_REG_SR_ADDR(B100_SR_RX_CTRL1), B100_RX_SID_BASE + 1 + )); + for (size_t dspno = 0; dspno < _rx_dsps.size(); dspno++){ + _rx_dsps[dspno]->set_link_rate(B100_LINK_RATE_BPS); + _tree->access<double>(mb_path / "tick_rate") + .subscribe(boost::bind(&rx_dsp_core_200::set_tick_rate, _rx_dsps[dspno], _1)); + fs_path rx_dsp_path = mb_path / str(boost::format("rx_dsps/%u") % dspno); + _tree->create<double>(rx_dsp_path / "rate/value") + .coerce(boost::bind(&rx_dsp_core_200::set_host_rate, _rx_dsps[dspno], _1)) + .subscribe(boost::bind(&b100_impl::update_rx_samp_rate, this, _1)); + _tree->create<double>(rx_dsp_path / "freq/value") + .coerce(boost::bind(&rx_dsp_core_200::set_freq, _rx_dsps[dspno], _1)); + _tree->create<meta_range_t>(rx_dsp_path / "freq/range") + .publish(boost::bind(&rx_dsp_core_200::get_freq_range, _rx_dsps[dspno])); + _tree->create<stream_cmd_t>(rx_dsp_path / "stream_cmd") + .subscribe(boost::bind(&rx_dsp_core_200::issue_stream_command, _rx_dsps[dspno], _1)); + } + + //////////////////////////////////////////////////////////////////// + // create tx dsp control objects + //////////////////////////////////////////////////////////////////// + _tx_dsp = tx_dsp_core_200::make( + _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TX_DSP), B100_REG_SR_ADDR(B100_SR_TX_CTRL), B100_TX_ASYNC_SID + ); + _tx_dsp->set_link_rate(B100_LINK_RATE_BPS); + _tree->access<double>(mb_path / "tick_rate") + .subscribe(boost::bind(&tx_dsp_core_200::set_tick_rate, _tx_dsp, _1)); + _tree->create<double>(mb_path / "tx_dsps/0/rate/value") + .coerce(boost::bind(&tx_dsp_core_200::set_host_rate, _tx_dsp, _1)) + .subscribe(boost::bind(&b100_impl::update_tx_samp_rate, this, _1)); + _tree->create<double>(mb_path / "tx_dsps/0/freq/value") + .coerce(boost::bind(&tx_dsp_core_200::set_freq, _tx_dsp, _1)); + _tree->create<meta_range_t>(mb_path / "tx_dsps/0/freq/range") + .publish(boost::bind(&tx_dsp_core_200::get_freq_range, _tx_dsp)); + + //////////////////////////////////////////////////////////////////// + // create time control objects + //////////////////////////////////////////////////////////////////// + time64_core_200::readback_bases_type time64_rb_bases; + time64_rb_bases.rb_secs_now = B100_REG_RB_TIME_NOW_SECS; + time64_rb_bases.rb_ticks_now = B100_REG_RB_TIME_NOW_TICKS; + time64_rb_bases.rb_secs_pps = B100_REG_RB_TIME_PPS_SECS; + time64_rb_bases.rb_ticks_pps = B100_REG_RB_TIME_PPS_TICKS; + _time64 = time64_core_200::make( + _fpga_ctrl, B100_REG_SR_ADDR(B100_SR_TIME64), time64_rb_bases + ); + _tree->access<double>(mb_path / "tick_rate") + .subscribe(boost::bind(&time64_core_200::set_tick_rate, _time64, _1)); + _tree->create<time_spec_t>(mb_path / "time/now") + .publish(boost::bind(&time64_core_200::get_time_now, _time64)) + .subscribe(boost::bind(&time64_core_200::set_time_now, _time64, _1)); + _tree->create<time_spec_t>(mb_path / "time/pps") + .publish(boost::bind(&time64_core_200::get_time_last_pps, _time64)) + .subscribe(boost::bind(&time64_core_200::set_time_next_pps, _time64, _1)); + //setup time source props + _tree->create<std::string>(mb_path / "time_source/value") + .subscribe(boost::bind(&time64_core_200::set_time_source, _time64, _1)); + _tree->create<std::vector<std::string> >(mb_path / "time_source/options") + .publish(boost::bind(&time64_core_200::get_time_sources, _time64)); + //setup reference source props + _tree->create<std::string>(mb_path / "clock_source/value") + .subscribe(boost::bind(&b100_impl::update_clock_source, this, _1)); + static const std::vector<std::string> clock_sources = boost::assign::list_of("internal")("external")("auto"); + _tree->create<std::vector<std::string> >(mb_path / "clock_source/options").set(clock_sources); + + //////////////////////////////////////////////////////////////////// + // create dboard control objects + //////////////////////////////////////////////////////////////////// + + //read the dboard eeprom to extract the dboard ids + dboard_eeprom_t rx_db_eeprom, tx_db_eeprom, gdb_eeprom; + rx_db_eeprom.load(*_fpga_i2c_ctrl, I2C_ADDR_RX_A); + tx_db_eeprom.load(*_fpga_i2c_ctrl, I2C_ADDR_TX_A); + gdb_eeprom.load(*_fpga_i2c_ctrl, I2C_ADDR_TX_A ^ 5); + + //create the properties and register subscribers + _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/rx_eeprom") + .set(rx_db_eeprom) + .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "rx", _1)); + _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/tx_eeprom") + .set(tx_db_eeprom) + .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "tx", _1)); + _tree->create<dboard_eeprom_t>(mb_path / "dboards/A/gdb_eeprom") + .set(gdb_eeprom) + .subscribe(boost::bind(&b100_impl::set_db_eeprom, this, "gdb", _1)); + + //create a new dboard interface and manager + _dboard_iface = make_b100_dboard_iface(_fpga_ctrl, _fpga_i2c_ctrl, _fpga_spi_ctrl, _clock_ctrl, _codec_ctrl); + _tree->create<dboard_iface::sptr>(mb_path / "dboards/A/iface").set(_dboard_iface); + _dboard_manager = dboard_manager::make( + rx_db_eeprom.id, + ((gdb_eeprom.id == dboard_id_t::none())? tx_db_eeprom : gdb_eeprom).id, + _dboard_iface + ); + BOOST_FOREACH(const std::string &name, _dboard_manager->get_rx_subdev_names()){ + dboard_manager::populate_prop_tree_from_subdev( + _tree->subtree(mb_path / "dboards/A/rx_frontends" / name), + _dboard_manager->get_rx_subdev(name) + ); + } + BOOST_FOREACH(const std::string &name, _dboard_manager->get_tx_subdev_names()){ + dboard_manager::populate_prop_tree_from_subdev( + _tree->subtree(mb_path / "dboards/A/tx_frontends" / name), + _dboard_manager->get_tx_subdev(name) + ); + } + + //initialize io handling + this->io_init(); + + //////////////////////////////////////////////////////////////////// + // do some post-init tasks + //////////////////////////////////////////////////////////////////// + _tree->access<double>(mb_path / "tick_rate").update() //update and then subscribe the clock callback + .subscribe(boost::bind(&b100_clock_ctrl::set_fpga_clock_rate, _clock_ctrl, _1)); + + //and now that the tick rate is set, init the host rates to something + BOOST_FOREACH(const std::string &name, _tree->list(mb_path / "rx_dsps")){ + _tree->access<double>(mb_path / "rx_dsps" / name / "rate" / "value").set(1e6); + } + BOOST_FOREACH(const std::string &name, _tree->list(mb_path / "tx_dsps")){ + _tree->access<double>(mb_path / "tx_dsps" / name / "rate" / "value").set(1e6); + } + + _tree->access<subdev_spec_t>(mb_path / "rx_subdev_spec").set(subdev_spec_t("A:"+_dboard_manager->get_rx_subdev_names()[0])); + _tree->access<subdev_spec_t>(mb_path / "tx_subdev_spec").set(subdev_spec_t("A:"+_dboard_manager->get_tx_subdev_names()[0])); + _tree->access<std::string>(mb_path / "clock_source/value").set("internal"); + _tree->access<std::string>(mb_path / "time_source/value").set("none"); +} + +b100_impl::~b100_impl(void){ + //set an empty async callback now that we deconstruct + _fpga_ctrl->set_async_cb(b100_ctrl::async_cb_type()); +} + +void b100_impl::check_fw_compat(void){ + unsigned char data[4]; //useless data buffer + const boost::uint16_t fw_compat_num = _fx2_ctrl->usrp_control_read( + VRQ_FW_COMPAT, 0, 0, data, sizeof(data) + ); + if (fw_compat_num != B100_FW_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected firmware compatibility number 0x%x, but got 0x%x:\n" + "The firmware build is not compatible with the host code build." + ) % B100_FW_COMPAT_NUM % fw_compat_num)); + } +} + +void b100_impl::check_fpga_compat(void){ + const boost::uint16_t fpga_compat_num = _fpga_ctrl->peek16(B100_REG_MISC_COMPAT); + if (fpga_compat_num != B100_FPGA_COMPAT_NUM){ + throw uhd::runtime_error(str(boost::format( + "Expected FPGA compatibility number 0x%x, but got 0x%x:\n" + "The FPGA build is not compatible with the host code build." + ) % B100_FPGA_COMPAT_NUM % fpga_compat_num)); + } +} + +double b100_impl::update_rx_codec_gain(const double gain){ + //set gain on both I and Q, readback on one + //TODO in the future, gains should have individual control + _codec_ctrl->set_rx_pga_gain(gain, 'A'); + _codec_ctrl->set_rx_pga_gain(gain, 'B'); + return _codec_ctrl->get_rx_pga_gain('A'); +} + +void b100_impl::set_mb_eeprom(const uhd::usrp::mboard_eeprom_t &mb_eeprom){ + mb_eeprom.commit(*_fx2_ctrl, mboard_eeprom_t::MAP_B000); +} + +void b100_impl::set_db_eeprom(const std::string &type, const uhd::usrp::dboard_eeprom_t &db_eeprom){ + if (type == "rx") db_eeprom.store(*_fpga_i2c_ctrl, I2C_ADDR_RX_A); + if (type == "tx") db_eeprom.store(*_fpga_i2c_ctrl, I2C_ADDR_TX_A); + if (type == "gdb") db_eeprom.store(*_fpga_i2c_ctrl, I2C_ADDR_TX_A ^ 5); +} + +void b100_impl::update_clock_source(const std::string &source){ + if (source == "auto") _clock_ctrl->use_auto_ref(); + else if (source == "internal") _clock_ctrl->use_internal_ref(); + else if (source == "external") _clock_ctrl->use_external_ref(); + else throw uhd::runtime_error("unhandled clock configuration reference source: " + source); +} + +////////////////// some GPIF preparation related stuff ///////////////// +void b100_impl::reset_gpif(const boost::uint16_t ep) { + _fx2_ctrl->usrp_control_write(VRQ_RESET_GPIF, ep, ep, 0, 0); +} + +void b100_impl::enable_gpif(const bool en) { + _fx2_ctrl->usrp_control_write(VRQ_ENABLE_GPIF, en ? 1 : 0, 0, 0, 0); +} + +void b100_impl::clear_fpga_fifo(void) { + _fx2_ctrl->usrp_control_write(VRQ_CLEAR_FPGA_FIFO, 0, 0, 0, 0); +} |