diff options
Diffstat (limited to 'host/include/uhd/usrp/dboard_interface.hpp')
| -rw-r--r-- | host/include/uhd/usrp/dboard_interface.hpp | 102 |
1 files changed, 49 insertions, 53 deletions
diff --git a/host/include/uhd/usrp/dboard_interface.hpp b/host/include/uhd/usrp/dboard_interface.hpp index b3bab131d..43fd1f143 100644 --- a/host/include/uhd/usrp/dboard_interface.hpp +++ b/host/include/uhd/usrp/dboard_interface.hpp @@ -25,6 +25,33 @@ namespace uhd{ namespace usrp{ +//spi configuration struct +struct UHD_API spi_config_t{ + /*! + * The edge type specifies when data is valid + * relative to the edge of the serial clock. + */ + enum edge_t{ + EDGE_RISE = 'r', + EDGE_FALL = 'f' + }; + + //! on what edge is the mosi data valid? + edge_t mosi_edge; + + //! on what edge is the miso data valid? + edge_t miso_edge; + + /*! + * Create a new spi config. + * \param edge the default edge for mosi and miso + */ + spi_config_t(edge_t edge = EDGE_RISE){ + mosi_edge = edge; + miso_edge = edge; + } +}; + /*! * The daughter board dboard_interface to be subclassed. * A dboard instance dboard_interfaces with the mboard though this api. @@ -42,18 +69,6 @@ public: UNIT_TYPE_TX = 't' }; - //tells the host which device to use - enum spi_dev_t{ - SPI_DEV_RX = 'r', - SPI_DEV_TX = 't' - }; - - //args for spi format - enum spi_edge_t{ - SPI_EDGE_RISE = 'r', - SPI_EDGE_FALL = 'f' - }; - //tell the host which gpio bank enum gpio_bank_t{ GPIO_BANK_RX = 'r', @@ -68,10 +83,6 @@ public: ATR_REG_FULL_DUPLEX = 'f' }; - //structors - dboard_interface(void); - virtual ~dboard_interface(void); - /*! * Write to an aux dac. * \param unit which unit rx or tx @@ -131,61 +142,46 @@ public: /*! * \brief Write data to SPI bus peripheral. * - * \param dev which spi device - * \param edge args for format - * \param buf the data to write + * \param unit which unit, rx or tx + * \param config configuration settings + * \param data the bits to write LSB first + * \param num_bits the number of bits in data */ - void write_spi(spi_dev_t dev, spi_edge_t edge, const byte_vector_t &buf); - - /*! - * \brief Read data to SPI bus peripheral. - * - * \param dev which spi device - * \param edge args for format - * \param num_bytes number of bytes to read - * \return the data that was read - */ - byte_vector_t read_spi(spi_dev_t dev, spi_edge_t edge, size_t num_bytes); + virtual void write_spi( + unit_type_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ) = 0; /*! * \brief Read and write data to SPI bus peripheral. * The data read back will be the same length as the input buffer. * - * \param dev which spi device - * \param edge args for format - * \param buf the data to write + * \param unit which unit, rx or tx + * \param config configuration settings + * \param data the bits to write LSB first + * \param num_bits the number of bits in data * \return the data that was read */ - byte_vector_t read_write_spi(spi_dev_t dev, spi_edge_t edge, const byte_vector_t &buf); + virtual boost::uint32_t read_write_spi( + unit_type_t unit, + const spi_config_t &config, + boost::uint32_t data, + size_t num_bits + ) = 0; /*! * \brief Get the rate of the rx dboard clock. - * \return the clock rate + * \return the clock rate in Hz */ virtual double get_rx_clock_rate(void) = 0; /*! * \brief Get the rate of the tx dboard clock. - * \return the clock rate + * \return the clock rate in Hz */ virtual double get_tx_clock_rate(void) = 0; - -private: - /*! - * \brief Read and write data to SPI bus peripheral. - * - * \param dev which spi device - * \param edge args for format - * \param buf the data to write - * \param readback false for write only - * \return the data that was read - */ - virtual byte_vector_t transact_spi( - spi_dev_t dev, - spi_edge_t edge, - const byte_vector_t &buf, - bool readback - ) = 0; }; }} //namespace |