diff options
Diffstat (limited to 'host/examples')
-rw-r--r-- | host/examples/CMakeLists.txt | 59 | ||||
-rw-r--r-- | host/examples/ascii_art_dft.hpp | 320 | ||||
-rw-r--r-- | host/examples/benchmark_rate.cpp | 268 | ||||
-rw-r--r-- | host/examples/latency_test.cpp | 168 | ||||
-rw-r--r-- | host/examples/network_relay.cpp | 227 | ||||
-rw-r--r-- | host/examples/rx_ascii_art_dft.cpp | 198 | ||||
-rw-r--r-- | host/examples/rx_multi_samples.cpp | 178 | ||||
-rw-r--r-- | host/examples/rx_samples_to_file.cpp | 218 | ||||
-rw-r--r-- | host/examples/rx_samples_to_udp.cpp | 172 | ||||
-rw-r--r-- | host/examples/rx_timed_samples.cpp | 128 | ||||
-rw-r--r-- | host/examples/test_dboard_coercion.cpp | 577 | ||||
-rw-r--r-- | host/examples/test_messages.cpp | 354 | ||||
-rw-r--r-- | host/examples/test_pps_input.cpp | 62 | ||||
-rw-r--r-- | host/examples/test_timed_commands.cpp | 129 | ||||
-rw-r--r-- | host/examples/transport_hammer.cpp | 340 | ||||
-rw-r--r-- | host/examples/tx_bursts.cpp | 160 | ||||
-rw-r--r-- | host/examples/tx_samples_from_file.cpp | 176 | ||||
-rw-r--r-- | host/examples/tx_timed_samples.cpp | 128 | ||||
-rw-r--r-- | host/examples/tx_waveforms.cpp | 264 | ||||
-rw-r--r-- | host/examples/txrx_loopback_to_file.cpp | 447 |
20 files changed, 4573 insertions, 0 deletions
diff --git a/host/examples/CMakeLists.txt b/host/examples/CMakeLists.txt new file mode 100644 index 000000000..3ba483134 --- /dev/null +++ b/host/examples/CMakeLists.txt @@ -0,0 +1,59 @@ +# +# Copyright 2010-2012 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# example applications +######################################################################## +SET(example_sources + benchmark_rate.cpp + network_relay.cpp + rx_multi_samples.cpp + rx_samples_to_file.cpp + rx_samples_to_udp.cpp + rx_timed_samples.cpp + test_dboard_coercion.cpp + test_messages.cpp + test_pps_input.cpp + test_timed_commands.cpp + transport_hammer.cpp + tx_bursts.cpp + tx_samples_from_file.cpp + tx_timed_samples.cpp + tx_waveforms.cpp + txrx_loopback_to_file.cpp + latency_test.cpp +) + +#for each source: build an executable and install +FOREACH(example_source ${example_sources}) + GET_FILENAME_COMPONENT(example_name ${example_source} NAME_WE) + ADD_EXECUTABLE(${example_name} ${example_source}) + TARGET_LINK_LIBRARIES(${example_name} uhd) + INSTALL(TARGETS ${example_name} RUNTIME DESTINATION ${PKG_LIB_DIR}/examples COMPONENT examples) +ENDFOREACH(example_source) + +######################################################################## +# ASCII Art DFT - requires curses, so this part is optional +######################################################################## +FIND_PACKAGE(Curses) + +IF(CURSES_FOUND) + INCLUDE_DIRECTORIES(${CURSES_INCLUDE_DIR}) + ADD_EXECUTABLE(rx_ascii_art_dft rx_ascii_art_dft.cpp) + TARGET_LINK_LIBRARIES(rx_ascii_art_dft uhd ${CURSES_LIBRARIES}) + INSTALL(TARGETS rx_ascii_art_dft RUNTIME DESTINATION ${PKG_LIB_DIR}/examples COMPONENT examples) +ENDIF(CURSES_FOUND) diff --git a/host/examples/ascii_art_dft.hpp b/host/examples/ascii_art_dft.hpp new file mode 100644 index 000000000..ee2267c2d --- /dev/null +++ b/host/examples/ascii_art_dft.hpp @@ -0,0 +1,320 @@ +// +// ASCII Art DFT Plotter - Josh Blum +// + +#ifndef ASCII_ART_DFT_HPP +#define ASCII_ART_DFT_HPP + +#include <string> +#include <cstddef> +#include <vector> +#include <complex> +#include <stdexcept> + +namespace acsii_art_dft{ + + //! Type produced by the log power DFT function + typedef std::vector<float> log_pwr_dft_type; + + /*! + * Get a logarithmic power DFT of the input samples. + * Samples are expected to be in the range [-1.0, 1.0]. + * \param samps a pointer to an array of complex samples + * \param nsamps the number of samples in the array + * \return a real range of DFT bins in units of dB + */ + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ); + + /*! + * Convert a DFT to a piroundable ascii plot. + * \param dft the log power dft bins + * \param width the frame width in characters + * \param height the frame height in characters + * \param samp_rate the sample rate in Sps + * \param dc_freq the DC frequency in Hz + * \param dyn_rng the dynamic range in dB + * \param ref_lvl the reference level in dB + * \return the plot as an ascii string + */ + std::string dft_to_plot( + const log_pwr_dft_type &dft, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ); + +} //namespace ascii_dft + +/*********************************************************************** + * Implementation includes + **********************************************************************/ +#include <cmath> +#include <sstream> +#include <algorithm> + +/*********************************************************************** + * Helper functions + **********************************************************************/ +namespace {/*anon*/ + + static const double pi = double(std::acos(-1.0)); + + //! Round a floating-point value to the nearest integer + template <typename T> int iround(T val){ + return (val > 0)? int(val + 0.5) : int(val - 0.5); + } + + //! Pick the closest number that is nice to display + template <typename T> T to_clean_num(const T num){ + if (num == 0) return 0; + const T pow10 = std::pow(T(10), int(std::floor(std::log10(std::abs(num))))); + const T norm = std::abs(num)/pow10; + static const int cleans[] = {1, 2, 5, 10}; + int clean = cleans[0]; + for (size_t i = 1; i < sizeof(cleans)/sizeof(cleans[0]); i++){ + if (std::abs(norm - cleans[i]) < std::abs(norm - clean)) + clean = cleans[i]; + } + return ((num < 0)? -1 : 1)*clean*pow10; + } + + //! Compute an FFT with pre-computed factors using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_f( + const std::complex<T> *samps, size_t nsamps, + const std::complex<T> *factors, + size_t start = 0, size_t step = 1 + ){ + if (nsamps == 1) return samps[start]; + std::complex<T> E_k = ct_fft_f(samps, nsamps/2, factors+1, start, step*2); + std::complex<T> O_k = ct_fft_f(samps, nsamps/2, factors+1, start+step, step*2); + return E_k + factors[0]*O_k; + } + + //! Compute an FFT for a particular bin k using Cooley-Tukey + template <typename T> std::complex<T> ct_fft_k( + const std::complex<T> *samps, size_t nsamps, size_t k + ){ + //pre-compute the factors to use in Cooley-Tukey + std::vector<std::complex<T> > factors; + for (size_t N = nsamps; N != 0; N /= 2){ + factors.push_back(std::exp(std::complex<T>(0, T(-2*pi*k/N)))); + } + return ct_fft_f(samps, nsamps, &factors.front()); + } + + //! Helper class to build a DFT plot frame + class frame_type{ + public: + frame_type(size_t width, size_t height): + _frame(width-1, std::vector<char>(height, ' ')) + { + /* NOP */ + } + + //accessors to parts of the frame + char &get_plot(size_t b, size_t z){return _frame.at(b+albl_w).at(z+flbl_h);} + char &get_albl(size_t b, size_t z){return _frame.at(b) .at(z+flbl_h);} + char &get_ulbl(size_t b) {return _frame.at(b) .at(flbl_h-1);} + char &get_flbl(size_t b) {return _frame.at(b+albl_w).at(flbl_h-1);} + + //dimension accessors + size_t get_plot_h(void) const{return _frame.front().size() - flbl_h;} + size_t get_plot_w(void) const{return _frame.size() - albl_w;} + size_t get_albl_w(void) const{return albl_w;} + + std::string to_string(void){ + std::stringstream frame_ss; + for (size_t z = 0; z < _frame.front().size(); z++){ + for (size_t b = 0; b < _frame.size(); b++){ + frame_ss << _frame[b][_frame[b].size()-z-1]; + } + frame_ss << std::endl; + } + return frame_ss.str(); + } + + private: + static const size_t albl_w = 6, flbl_h = 1; + std::vector<std::vector<char> > _frame; + }; + +} //namespace /*anon*/ + +/*********************************************************************** + * Implementation code + **********************************************************************/ +namespace acsii_art_dft{ + + //! skip constants for amplitude and frequency labels + static const size_t albl_skip = 5, flbl_skip = 20; + + template <typename T> log_pwr_dft_type log_pwr_dft( + const std::complex<T> *samps, size_t nsamps + ){ + if (nsamps & (nsamps - 1)) + throw std::runtime_error("num samps is not a power of 2"); + + //compute the window + double win_pwr = 0; + std::vector<std::complex<T> > win_samps; + for(size_t n = 0; n < nsamps; n++){ + //double w_n = 1; + //double w_n = 0.54 //hamming window + // -0.46*std::cos(2*pi*n/(nsamps-1)) + //; + double w_n = 0.35875 //blackman-harris window + -0.48829*std::cos(2*pi*n/(nsamps-1)) + +0.14128*std::cos(4*pi*n/(nsamps-1)) + -0.01168*std::cos(6*pi*n/(nsamps-1)) + ; + //double w_n = 1 // flat top window + // -1.930*std::cos(2*pi*n/(nsamps-1)) + // +1.290*std::cos(4*pi*n/(nsamps-1)) + // -0.388*std::cos(6*pi*n/(nsamps-1)) + // +0.032*std::cos(8*pi*n/(nsamps-1)) + //; + win_samps.push_back(T(w_n)*samps[n]); + win_pwr += w_n*w_n; + } + + //compute the log-power dft + log_pwr_dft_type log_pwr_dft; + for(size_t k = 0; k < nsamps; k++){ + std::complex<T> dft_k = ct_fft_k(&win_samps.front(), nsamps, k); + log_pwr_dft.push_back(float( + + 20*std::log10(std::abs(dft_k)) + - 20*std::log10(T(nsamps)) + - 10*std::log10(win_pwr/nsamps) + + 3 + )); + } + + return log_pwr_dft; + } + + std::string dft_to_plot( + const log_pwr_dft_type &dft_, + size_t width, + size_t height, + double samp_rate, + double dc_freq, + float dyn_rng, + float ref_lvl + ){ + frame_type frame(width, height); //fill this frame + + //re-order the dft so dc in in the center + const size_t num_bins = dft_.size() - 1 + dft_.size()%2; //make it odd + log_pwr_dft_type dft(num_bins); + for (size_t n = 0; n < num_bins; n++){ + dft[n] = dft_[(n + num_bins/2)%num_bins]; + } + + //fill the plot with dft bins + for (size_t b = 0; b < frame.get_plot_w(); b++){ + //indexes from the dft to grab for the plot + const size_t n_start = std::max(iround(double(b-0.5)*(num_bins-1)/(frame.get_plot_w()-1)), 0); + const size_t n_stop = std::min(iround(double(b+0.5)*(num_bins-1)/(frame.get_plot_w()-1)), int(num_bins)); + + //calculate val as the max across points + float val = dft.at(n_start); + for (size_t n = n_start; n < n_stop; n++) val = std::max(val, dft.at(n)); + + const float scaled = (val - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng; + for (size_t z = 0; z < frame.get_plot_h(); z++){ + static const std::string syms(".:!|"); + if (scaled-z > 1) frame.get_plot(b, z) = syms.at(syms.size()-1); + else if (scaled-z > 0) frame.get_plot(b, z) = syms.at(size_t((scaled-z)*syms.size())); + } + } + + //create vertical amplitude labels + const float db_step = to_clean_num(dyn_rng/(frame.get_plot_h()-1)*albl_skip); + for ( + float db = db_step*(int((ref_lvl - dyn_rng)/db_step)); + db <= db_step*(int(ref_lvl/db_step)); + db += db_step + ){ + const int z = iround((db - (ref_lvl - dyn_rng))*(frame.get_plot_h()-1)/dyn_rng); + if (z < 0 or size_t(z) >= frame.get_plot_h()) continue; + std::stringstream ss; ss << db; std::string lbl = ss.str(); + for (size_t i = 0; i < lbl.size() and i < frame.get_albl_w(); i++){ + frame.get_albl(i, z) = lbl[i]; + } + } + + //create vertical units label + std::string ulbl = "dBfs"; + for (size_t i = 0; i < ulbl.size(); i++){ + frame.get_ulbl(i+1) = ulbl[i]; + } + + //create horizontal frequency labels + const double f_step = to_clean_num(samp_rate/frame.get_plot_w()*flbl_skip); + for ( + double freq = f_step*int((-samp_rate/2/f_step)); + freq <= f_step*int((+samp_rate/2/f_step)); + freq += f_step + ){ + const int b = iround((freq + samp_rate/2)*(frame.get_plot_w()-1)/samp_rate); + std::stringstream ss; ss << (freq+dc_freq)/1e6 << "MHz"; std::string lbl = ss.str(); + if (b < int(lbl.size()/2) or b + lbl.size() - lbl.size()/2 >= frame.get_plot_w()) continue; + for (size_t i = 0; i < lbl.size(); i++){ + frame.get_flbl(b + i - lbl.size()/2) = lbl[i]; + } + } + + return frame.to_string(); + } +} //namespace ascii_dft + +#endif /*ASCII_ART_DFT_HPP*/ + +/* + +//example main function to test the dft + +#include <iostream> +#include <cstdlib> +#include <curses.h> + +int main(void){ + initscr(); + + while (true){ + clear(); + + std::vector<std::complex<float> > samples; + for(size_t i = 0; i < 512; i++){ + samples.push_back(std::complex<float>( + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4, + float(std::rand() - RAND_MAX/2)/(RAND_MAX)/4 + )); + samples[i] += 0.5*std::sin(i*3.14/2) + 0.7; + } + + acsii_art_dft::log_pwr_dft_type dft; + dft = acsii_art_dft::log_pwr_dft(&samples.front(), samples.size()); + + printw("%s", acsii_art_dft::dft_to_plot( + dft, COLS, LINES, + 12.5e4, 2.45e9, + 60, 0 + ).c_str()); + + sleep(1); + } + + + endwin(); + std::cout << "here\n"; + return 0; +} + +*/ + diff --git a/host/examples/benchmark_rate.cpp b/host/examples/benchmark_rate.cpp new file mode 100644 index 000000000..8a000f6c3 --- /dev/null +++ b/host/examples/benchmark_rate.cpp @@ -0,0 +1,268 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/convert.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +/*********************************************************************** + * Test result variables + **********************************************************************/ +unsigned long long num_overflows = 0; +unsigned long long num_underflows = 0; +unsigned long long num_rx_samps = 0; +unsigned long long num_tx_samps = 0; +unsigned long long num_dropped_samps = 0; +unsigned long long num_seq_errors = 0; + +/*********************************************************************** + * Benchmark RX Rate + **********************************************************************/ +void benchmark_rx_rate(uhd::usrp::multi_usrp::sptr usrp, const std::string &rx_cpu, const std::string &rx_otw){ + uhd::set_thread_priority_safe(); + + //create a receive streamer + uhd::stream_args_t stream_args(rx_cpu, rx_otw); + for (size_t ch = 0; ch < usrp->get_num_mboards(); ch++) //linear channel mapping + stream_args.channels.push_back(ch); + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //print pre-test summary + std::cout << boost::format( + "Testing receive rate %f Msps" + ) % (usrp->get_rx_rate()/1e6) << std::endl; + + //setup variables and allocate buffer + uhd::rx_metadata_t md; + const size_t max_samps_per_packet = rx_stream->get_max_num_samps(); + std::vector<char> buff(max_samps_per_packet*uhd::convert::get_bytes_per_item(rx_cpu)); + std::vector<void *> buffs; + for (size_t ch = 0; ch < stream_args.channels.size(); ch++) + buffs.push_back(&buff.front()); //same buffer for each channel + bool had_an_overflow = false; + uhd::time_spec_t last_time; + const double rate = usrp->get_rx_rate(); + + uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + cmd.time_spec = usrp->get_time_now() + uhd::time_spec_t(0.05); + cmd.stream_now = (buffs.size() == 1); + usrp->issue_stream_cmd(cmd); + while (not boost::this_thread::interruption_requested()){ + num_rx_samps += rx_stream->recv(buffs, max_samps_per_packet, md); + + //handle the error codes + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_NONE: + if (had_an_overflow){ + had_an_overflow = false; + num_dropped_samps += boost::math::iround((md.time_spec - last_time).get_real_secs()*rate); + } + break; + + case uhd::rx_metadata_t::ERROR_CODE_OVERFLOW: + had_an_overflow = true; + last_time = md.time_spec; + num_overflows++; + break; + + default: + std::cerr << "Error code: " << md.error_code << std::endl; + std::cerr << "Unexpected error on recv, continuing..." << std::endl; + break; + } + + } + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); +} + +/*********************************************************************** + * Benchmark TX Rate + **********************************************************************/ +void benchmark_tx_rate(uhd::usrp::multi_usrp::sptr usrp, const std::string &tx_cpu, const std::string &tx_otw){ + uhd::set_thread_priority_safe(); + + //create a transmit streamer + uhd::stream_args_t stream_args(tx_cpu, tx_otw); + for (size_t ch = 0; ch < usrp->get_num_mboards(); ch++) //linear channel mapping + stream_args.channels.push_back(ch); + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //print pre-test summary + std::cout << boost::format( + "Testing transmit rate %f Msps" + ) % (usrp->get_tx_rate()/1e6) << std::endl; + + //setup variables and allocate buffer + uhd::tx_metadata_t md; + md.time_spec = usrp->get_time_now() + uhd::time_spec_t(0.05); + const size_t max_samps_per_packet = tx_stream->get_max_num_samps(); + std::vector<char> buff(max_samps_per_packet*uhd::convert::get_bytes_per_item(tx_cpu)); + std::vector<const void *> buffs; + for (size_t ch = 0; ch < stream_args.channels.size(); ch++) + buffs.push_back(&buff.front()); //same buffer for each channel + md.has_time_spec = (buffs.size() != 1); + + while (not boost::this_thread::interruption_requested()){ + num_tx_samps += tx_stream->send(buffs, max_samps_per_packet, md); + md.has_time_spec = false; + } + + //send a mini EOB packet + md.end_of_burst = true; + tx_stream->send(buffs, 0, md); +} + +void benchmark_tx_rate_async_helper(uhd::usrp::multi_usrp::sptr usrp){ + //setup variables and allocate buffer + uhd::async_metadata_t async_md; + + while (not boost::this_thread::interruption_requested()){ + + if (not usrp->get_device()->recv_async_msg(async_md)) continue; + + //handle the error codes + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: + return; + + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW: + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW_IN_PACKET: + num_underflows++; + break; + + case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR: + case uhd::async_metadata_t::EVENT_CODE_SEQ_ERROR_IN_BURST: + num_seq_errors++; + break; + + default: + std::cerr << "Event code: " << async_md.event_code << std::endl; + std::cerr << "Unexpected event on async recv, continuing..." << std::endl; + break; + } + } +} + +/*********************************************************************** + * Main code + dispatcher + **********************************************************************/ +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double duration; + double rx_rate, tx_rate; + std::string rx_otw, tx_otw; + std::string rx_cpu, tx_cpu; + std::string mode; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("duration", po::value<double>(&duration)->default_value(10.0), "duration for the test in seconds") + ("rx_rate", po::value<double>(&rx_rate), "specify to perform a RX rate test (sps)") + ("tx_rate", po::value<double>(&tx_rate), "specify to perform a TX rate test (sps)") + ("rx_otw", po::value<std::string>(&rx_otw)->default_value("sc16"), "specify the over-the-wire sample mode for RX") + ("tx_otw", po::value<std::string>(&tx_otw)->default_value("sc16"), "specify the over-the-wire sample mode for TX") + ("rx_cpu", po::value<std::string>(&rx_cpu)->default_value("fc32"), "specify the host/cpu sample mode for RX") + ("tx_cpu", po::value<std::string>(&tx_cpu)->default_value("fc32"), "specify the host/cpu sample mode for TX") + ("mode", po::value<std::string>(&mode)->default_value("none"), "multi-channel sync mode option: none, mimo") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or (vm.count("rx_rate") + vm.count("tx_rate")) == 0){ + std::cout << boost::format("UHD Benchmark Rate %s") % desc << std::endl; + std::cout << + " Specify --rx_rate for a receive-only test.\n" + " Specify --tx_rate for a transmit-only test.\n" + " Specify both options for a full-duplex test.\n" + << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + uhd::device_addrs_t device_addrs = uhd::device::find(args); + if (not device_addrs.empty() and device_addrs.at(0).get("type", "") == "usrp1"){ + std::cerr << "*** Warning! ***" << std::endl; + std::cerr << "Benchmark results will be inaccurate on USRP1 due to insufficient features.\n" << std::endl; + } + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + if (mode == "mimo"){ + usrp->set_clock_source("mimo", 0); + usrp->set_time_source("mimo", 0); + boost::this_thread::sleep(boost::posix_time::seconds(1)); + } + + boost::thread_group thread_group; + + //spawn the receive test thread + if (vm.count("rx_rate")){ + usrp->set_rx_rate(rx_rate); + thread_group.create_thread(boost::bind(&benchmark_rx_rate, usrp, rx_cpu, rx_otw)); + } + + //spawn the transmit test thread + if (vm.count("tx_rate")){ + usrp->set_tx_rate(tx_rate); + thread_group.create_thread(boost::bind(&benchmark_tx_rate, usrp, tx_cpu, tx_otw)); + thread_group.create_thread(boost::bind(&benchmark_tx_rate_async_helper, usrp)); + } + + //sleep for the required duration + const long secs = long(duration); + const long usecs = long((duration - secs)*1e6); + boost::this_thread::sleep(boost::posix_time::seconds(secs) + boost::posix_time::microseconds(usecs)); + + //interrupt and join the threads + thread_group.interrupt_all(); + thread_group.join_all(); + + //print summary + std::cout << std::endl << boost::format( + "Benchmark rate summary:\n" + " Num received samples: %u\n" + " Num dropped samples: %u\n" + " Num overflows detected: %u\n" + " Num transmitted samples: %u\n" + " Num sequence errors: %u\n" + " Num underflows detected: %u\n" + ) % num_rx_samps % num_dropped_samps % num_overflows % num_tx_samps % num_seq_errors % num_underflows << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/latency_test.cpp b/host/examples/latency_test.cpp new file mode 100644 index 000000000..518d2383a --- /dev/null +++ b/host/examples/latency_test.cpp @@ -0,0 +1,168 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t nsamps; + double rate; + double rtt; + size_t nruns; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("nsamps", po::value<size_t>(&nsamps)->default_value(100), "number of samples per run") + ("nruns", po::value<size_t>(&nruns)->default_value(1000), "number of tests to perform") + ("rtt", po::value<double>(&rtt)->default_value(0.001), "delay between receive and transmit (seconds)") + ("rate", po::value<double>(&rate)->default_value(100e6/4), "sample rate for receive and transmit (sps)") + ("verbose", "specify to enable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD - Latency Test %s") % desc << std::endl; + std::cout << + " Latency test receives a packet at time t,\n" + " and tries to send a packet at time t + rtt,\n" + " where rtt is the round trip time sample time\n" + " from device to host and back to the device.\n" + << std::endl; + return ~0; + } + + bool verbose = vm.count("verbose") != 0; + + //create a usrp device + std::cout << std::endl; + //std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + //std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //set the tx sample rate + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl; + + //set the rx sample rate + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl; + + //allocate a buffer to use + std::vector<std::complex<float> > buffer(nsamps); + + //create RX and TX streamers + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //initialize result counts + int time_error = 0; + int ack = 0; + int underflow = 0; + int other = 0; + + for(size_t nrun = 0; nrun < nruns; nrun++){ + + /*************************************************************** + * Issue a stream command some time in the near future + **************************************************************/ + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = buffer.size(); + stream_cmd.stream_now = false; + stream_cmd.time_spec = usrp->get_time_now() + uhd::time_spec_t(0.01); + usrp->issue_stream_cmd(stream_cmd); + + /*************************************************************** + * Receive the requested packet + **************************************************************/ + uhd::rx_metadata_t rx_md; + size_t num_rx_samps = rx_stream->recv( + &buffer.front(), buffer.size(), rx_md + ); + + if(verbose) std::cout << boost::format("Got packet: %u samples, %u full secs, %f frac secs") + % num_rx_samps % rx_md.time_spec.get_full_secs() % rx_md.time_spec.get_frac_secs() << std::endl; + + /*************************************************************** + * Transmit a packet with delta time after received packet + **************************************************************/ + uhd::tx_metadata_t tx_md; + tx_md.start_of_burst = true; + tx_md.end_of_burst = true; + tx_md.has_time_spec = true; + tx_md.time_spec = rx_md.time_spec + uhd::time_spec_t(rtt); + size_t num_tx_samps = tx_stream->send( + &buffer.front(), buffer.size(), tx_md + ); + if(verbose) std::cout << boost::format("Sent %d samples") % num_tx_samps << std::endl; + + /*************************************************************** + * Check the async messages for result + **************************************************************/ + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format("failed:\n Async message recv timed out.\n") << std::endl; + continue; + } + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_TIME_ERROR: + time_error++; + break; + + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: + ack++; + break; + + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW: + underflow++; + break; + + default: + std::cerr << boost::format( + "failed:\n Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + other++; + break; + } + } + + /*************************************************************** + * Print the summary + **************************************************************/ + std::cout << boost::format("\nACK %d, UNDERFLOW %d, TIME_ERR %d, other %d") + % ack % underflow % time_error % other << std::endl; + return 0; +} diff --git a/host/examples/network_relay.cpp b/host/examples/network_relay.cpp new file mode 100644 index 000000000..e8f9e667f --- /dev/null +++ b/host/examples/network_relay.cpp @@ -0,0 +1,227 @@ +// +// Copyright 2010-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> +#include <boost/format.hpp> +#include <boost/asio.hpp> +#include <iostream> +#include <csignal> +#include <vector> + +namespace po = boost::program_options; +namespace asio = boost::asio; + +typedef boost::shared_ptr<asio::ip::udp::socket> socket_type; + +static const size_t insane_mtu = 9000; + +boost::mutex spawn_mutex; + +#if defined(UHD_PLATFORM_MACOS) + //limit buffer resize on macos or it will error + const size_t rx_dsp_buff_size = size_t(1e6); +#else + //set to half-a-second of buffering at max rate + const size_t rx_dsp_buff_size = size_t(50e6); +#endif + +const size_t tx_dsp_buff_size = (1 << 20); + +/*********************************************************************** + * Signal handlers + **********************************************************************/ +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +static bool wait_for_recv_ready(int sock_fd){ + //setup timeval for timeout + timeval tv; + tv.tv_sec = 0; + tv.tv_usec = 100000; //100ms + + //setup rset for timeout + fd_set rset; + FD_ZERO(&rset); + FD_SET(sock_fd, &rset); + + //call select with timeout on receive socket + return ::select(sock_fd+1, &rset, NULL, NULL, &tv) > 0; +} + +/*********************************************************************** + * Relay class + **********************************************************************/ +class udp_relay_type{ +public: + udp_relay_type( + const std::string &server_addr, + const std::string &client_addr, + const std::string &port, + const size_t server_rx_size = 0, + const size_t server_tx_size = 0, + const size_t client_rx_size = 0, + const size_t client_tx_size = 0 + ):_port(port){ + { + asio::ip::udp::resolver resolver(_io_service); + asio::ip::udp::resolver::query query(asio::ip::udp::v4(), server_addr, port); + asio::ip::udp::endpoint endpoint = *resolver.resolve(query); + + _server_socket = boost::shared_ptr<asio::ip::udp::socket>(new asio::ip::udp::socket(_io_service, endpoint)); + resize_buffs(_server_socket, server_rx_size, server_tx_size); + } + { + asio::ip::udp::resolver resolver(_io_service); + asio::ip::udp::resolver::query query(asio::ip::udp::v4(), client_addr, port); + asio::ip::udp::endpoint endpoint = *resolver.resolve(query); + + _client_socket = boost::shared_ptr<asio::ip::udp::socket>(new asio::ip::udp::socket(_io_service)); + _client_socket->open(asio::ip::udp::v4()); + _client_socket->connect(endpoint); + resize_buffs(_client_socket, client_rx_size, client_tx_size); + } + + std::cout << "spawning relay threads... " << _port << std::endl; + _thread_group.create_thread(boost::bind(&udp_relay_type::server_thread, this)); + spawn_mutex.lock(); + spawn_mutex.lock(); + spawn_mutex.unlock(); + _thread_group.create_thread(boost::bind(&udp_relay_type::client_thread, this)); + spawn_mutex.lock(); + spawn_mutex.lock(); + spawn_mutex.unlock(); + std::cout << " done!" << std::endl << std::endl; + } + + ~udp_relay_type(void){ + std::cout << "killing relay threads... " << _port << std::endl; + _thread_group.interrupt_all(); + _thread_group.join_all(); + std::cout << " done!" << std::endl << std::endl; + } + +private: + + static void resize_buffs(socket_type sock, const size_t rx_size, const size_t tx_size){ + if (rx_size != 0) sock->set_option(asio::socket_base::receive_buffer_size(rx_size)); + if (tx_size != 0) sock->set_option(asio::socket_base::send_buffer_size(tx_size)); + } + + void server_thread(void){ + uhd::set_thread_priority_safe(); + std::cout << " entering server_thread..." << std::endl; + spawn_mutex.unlock(); + std::vector<char> buff(insane_mtu); + while (not boost::this_thread::interruption_requested()){ + if (wait_for_recv_ready(_server_socket->native())){ + boost::mutex::scoped_lock lock(_endpoint_mutex); + const size_t len = _server_socket->receive_from(asio::buffer(&buff.front(), buff.size()), _endpoint); + lock.unlock(); + _client_socket->send(asio::buffer(&buff.front(), len)); + + //perform sequence error detection on tx dsp data (can detect bad network cards) + /* + if (_port[4] == '7'){ + static boost::uint32_t next_seq; + const boost::uint32_t this_seq = ntohl(reinterpret_cast<const boost::uint32_t *>(&buff.front())[0]); + if (next_seq != this_seq and this_seq != 0) std::cout << "S" << std::flush; + next_seq = this_seq + 1; + } + */ + } + } + std::cout << " exiting server_thread..." << std::endl; + } + + void client_thread(void){ + uhd::set_thread_priority_safe(); + std::cout << " entering client_thread..." << std::endl; + spawn_mutex.unlock(); + std::vector<char> buff(insane_mtu); + while (not boost::this_thread::interruption_requested()){ + if (wait_for_recv_ready(_client_socket->native())){ + const size_t len = _client_socket->receive(asio::buffer(&buff.front(), buff.size())); + boost::mutex::scoped_lock lock(_endpoint_mutex); + _server_socket->send_to(asio::buffer(&buff.front(), len), _endpoint); + } + } + std::cout << " exiting client_thread..." << std::endl; + } + + const std::string _port; + boost::thread_group _thread_group; + asio::io_service _io_service; + asio::ip::udp::endpoint _endpoint; + boost::mutex _endpoint_mutex; + socket_type _server_socket, _client_socket; +}; + + +/*********************************************************************** + * Main + **********************************************************************/ +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string addr; + std::string bind; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("addr", po::value<std::string>(&addr), "the resolvable address of the usrp (must be specified)") + ("bind", po::value<std::string>(&bind)->default_value("0.0.0.0"), "bind the server to this network address (default: any)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or not vm.count("addr")){ + std::cout + << boost::format("UHD Network Relay %s") % desc << std::endl + << "Runs a network relay between UHD on one computer and a USRP on the network.\n" + << "This example is basically for test purposes. Use at your own convenience.\n" + << std::endl; + return ~0; + } + + { + boost::shared_ptr<udp_relay_type> ctrl (new udp_relay_type(bind, addr, "49152")); + boost::shared_ptr<udp_relay_type> rxdsp0(new udp_relay_type(bind, addr, "49156", 0, tx_dsp_buff_size, rx_dsp_buff_size, 0)); + boost::shared_ptr<udp_relay_type> txdsp0(new udp_relay_type(bind, addr, "49157", tx_dsp_buff_size, 0, 0, tx_dsp_buff_size)); + boost::shared_ptr<udp_relay_type> rxdsp1(new udp_relay_type(bind, addr, "49158", 0, tx_dsp_buff_size, rx_dsp_buff_size, 0)); + boost::shared_ptr<udp_relay_type> gps (new udp_relay_type(bind, addr, "49172")); + + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + + while (not stop_signal_called){ + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + } + } + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_ascii_art_dft.cpp b/host/examples/rx_ascii_art_dft.cpp new file mode 100644 index 000000000..fe8fb0347 --- /dev/null +++ b/host/examples/rx_ascii_art_dft.cpp @@ -0,0 +1,198 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include "ascii_art_dft.hpp" //implementation +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> //gets time +#include <boost/format.hpp> +#include <curses.h> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, ant, subdev, ref; + size_t num_bins; + double rate, freq, gain, bw, frame_rate; + float ref_lvl, dyn_rng; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + // hardware parameters + ("rate", po::value<double>(&rate), "rate of incoming samples (sps)") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + // display parameters + ("num-bins", po::value<size_t>(&num_bins)->default_value(512), "the number of bins in the DFT") + ("frame-rate", po::value<double>(&frame_rate)->default_value(5), "frame rate of the display (fps)") + ("ref-lvl", po::value<float>(&ref_lvl)->default_value(0), "reference level for the display (dB)") + ("dyn-rng", po::value<float>(&dyn_rng)->default_value(60), "dynamic range for the display (dB)") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "waveform type (internal, external, mimo)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help") or not vm.count("rate")){ + std::cout << boost::format("UHD RX ASCII Art DFT %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //Lock mboard clocks + usrp->set_clock_source(ref); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_rx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f MHz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting RX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_rx_bandwidth(bw); + std::cout << boost::format("Actual RX Bandwidth: %f MHz...") % usrp->get_rx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_rx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //Check Ref and LO Lock detect + std::vector<std::string> sensor_names; + sensor_names = usrp->get_rx_sensor_names(0); + if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) { + uhd::sensor_value_t lo_locked = usrp->get_rx_sensor("lo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking RX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + //create a receive streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //allocate recv buffer and metatdata + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(num_bins); + //------------------------------------------------------------------ + //-- Initialize + //------------------------------------------------------------------ + initscr(); //curses init + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS); + boost::system_time next_refresh = boost::get_system_time(); + + //------------------------------------------------------------------ + //-- Main loop + //------------------------------------------------------------------ + while (true){ + //read a buffer's worth of samples every iteration + size_t num_rx_samps = rx_stream->recv( + &buff.front(), buff.size(), md + ); + if (num_rx_samps != buff.size()) continue; + + //check and update the display refresh condition + if (boost::get_system_time() < next_refresh) continue; + next_refresh = boost::get_system_time() + boost::posix_time::microseconds(long(1e6/frame_rate)); + + //calculate the dft and create the ascii art frame + acsii_art_dft::log_pwr_dft_type lpdft( + acsii_art_dft::log_pwr_dft(&buff.front(), num_rx_samps) + ); + std::string frame = acsii_art_dft::dft_to_plot( + lpdft, COLS, LINES, + usrp->get_rx_rate(), + usrp->get_rx_freq(), + dyn_rng, ref_lvl + ); + + //curses screen handling: clear and print frame + clear(); + printw("%s", frame.c_str()); + + //curses key handling: no timeout, any key to exit + timeout(0); + int ch = getch(); + if (ch != KEY_RESIZE and ch != ERR) break; + } + + //------------------------------------------------------------------ + //-- Cleanup + //------------------------------------------------------------------ + usrp->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS); + endwin(); //curses done + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_multi_samples.cpp b/host/examples/rx_multi_samples.cpp new file mode 100644 index 000000000..42ef33d70 --- /dev/null +++ b/host/examples/rx_multi_samples.cpp @@ -0,0 +1,178 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, sync, subdev; + double seconds_in_future; + size_t total_num_samps; + double rate; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to receive") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to receive") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("sync", po::value<std::string>(&sync)->default_value("now"), "synchronization method: now, pps, mimo") + ("subdev", po::value<std::string>(&subdev), "subdev spec (homogeneous across motherboards)") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX Multi Samples %s") % desc << std::endl; + std::cout << + " This is a demonstration of how to receive aligned data from multiple channels.\n" + " This example can receive from multiple DSPs, multiple motherboards, or both.\n" + " The MIMO cable or PPS can be used to synchronize the configuration. See --sync\n" + "\n" + " Specify --subdev to select multiple channels per motherboard.\n" + " Ex: --subdev=\"0:A 0:B\" to get 2 channels on a Basic RX.\n" + "\n" + " Specify --args to select multiple motherboards in a configuration.\n" + " Ex: --args=\"addr0=192.168.10.2, addr1=192.168.10.3\"\n" + << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_rx_subdev_spec(subdev); //sets across all mboards + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the rx sample rate (sets across all channels) + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + if (sync == "now"){ + //This is not a true time lock, the devices will be off by a few RTT. + //Rather, this is just to allow for demonstration of the code below. + usrp->set_time_now(uhd::time_spec_t(0.0)); + } + else if (sync == "pps"){ + usrp->set_time_source("external"); + usrp->set_time_unknown_pps(uhd::time_spec_t(0.0)); + boost::this_thread::sleep(boost::posix_time::seconds(1)); //wait for pps sync pulse + } + else if (sync == "mimo"){ + UHD_ASSERT_THROW(usrp->get_num_mboards() == 2); + + //make mboard 1 a slave over the MIMO Cable + usrp->set_clock_source("mimo", 1); + usrp->set_time_source("mimo", 1); + + //set time on the master (mboard 0) + usrp->set_time_now(uhd::time_spec_t(0.0), 0); + + //sleep a bit while the slave locks its time to the master + boost::this_thread::sleep(boost::posix_time::milliseconds(100)); + } + + //create a receive streamer + //linearly map channels (index0 = channel0, index1 = channel1, ...) + uhd::stream_args_t stream_args("fc32"); //complex floats + for (size_t chan = 0; chan < usrp->get_rx_num_channels(); chan++) + stream_args.channels.push_back(chan); //linear mapping + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //setup streaming + std::cout << std::endl; + std::cout << boost::format( + "Begin streaming %u samples, %f seconds in the future..." + ) % total_num_samps % seconds_in_future << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); + usrp->issue_stream_cmd(stream_cmd); //tells all channels to stream + + //meta-data will be filled in by recv() + uhd::rx_metadata_t md; + + //allocate buffers to receive with samples (one buffer per channel) + const size_t samps_per_buff = rx_stream->get_max_num_samps(); + std::vector<std::vector<std::complex<float> > > buffs( + usrp->get_rx_num_channels(), std::vector<std::complex<float> >(samps_per_buff) + ); + + //create a vector of pointers to point to each of the channel buffers + std::vector<std::complex<float> *> buff_ptrs; + for (size_t i = 0; i < buffs.size(); i++) buff_ptrs.push_back(&buffs[i].front()); + + //the first call to recv() will block this many seconds before receiving + double timeout = seconds_in_future + 0.1; //timeout (delay before receive + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + //receive a single packet + size_t num_rx_samps = rx_stream->recv( + buff_ptrs, samps_per_buff, md, timeout + ); + + //use a small timeout for subsequent packets + timeout = 0.1; + + //handle the error code + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + if(verbose) std::cout << boost::format( + "Received packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + + num_acc_samps += num_rx_samps; + } + + if (num_acc_samps < total_num_samps) std::cerr << "Receive timeout before all samples received..." << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_samples_to_file.cpp b/host/examples/rx_samples_to_file.cpp new file mode 100644 index 000000000..5197bfe69 --- /dev/null +++ b/host/examples/rx_samples_to_file.cpp @@ -0,0 +1,218 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/exception.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <fstream> +#include <csignal> +#include <complex> + +namespace po = boost::program_options; + +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +template<typename samp_type> void recv_to_file( + uhd::usrp::multi_usrp::sptr usrp, + const std::string &cpu_format, + const std::string &wire_format, + const std::string &file, + size_t samps_per_buff, + int num_requested_samples +){ + int num_total_samps = 0; + //create a receive streamer + uhd::stream_args_t stream_args(cpu_format,wire_format); + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + uhd::rx_metadata_t md; + std::vector<samp_type> buff(samps_per_buff); + std::ofstream outfile(file.c_str(), std::ofstream::binary); + bool overflow_message = true; + + //setup streaming + uhd::stream_cmd_t stream_cmd((num_requested_samples == 0)? + uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS: + uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE + ); + stream_cmd.num_samps = num_requested_samples; + stream_cmd.stream_now = true; + stream_cmd.time_spec = uhd::time_spec_t(); + usrp->issue_stream_cmd(stream_cmd); + + while(not stop_signal_called and (num_requested_samples != num_total_samps or num_requested_samples == 0)){ + size_t num_rx_samps = rx_stream->recv(&buff.front(), buff.size(), md, 3.0); + + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) { + std::cout << boost::format("Timeout while streaming") << std::endl; + break; + } + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_OVERFLOW){ + if (overflow_message){ + overflow_message = false; + std::cerr << boost::format( + "Got an overflow indication. Please consider the following:\n" + " Your write medium must sustain a rate of %fMB/s.\n" + " Dropped samples will not be written to the file.\n" + " Please modify this example for your purposes.\n" + " This message will not appear again.\n" + ) % (usrp->get_rx_rate()*sizeof(samp_type)/1e6); + } + continue; + } + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + num_total_samps += num_rx_samps; + + outfile.write((const char*)&buff.front(), num_rx_samps*sizeof(samp_type)); + } + + outfile.close(); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, file, type, ant, subdev, ref, wirefmt; + size_t total_num_samps, spb; + double rate, freq, gain, bw; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("file", po::value<std::string>(&file)->default_value("usrp_samples.dat"), "name of the file to write binary samples to") + ("type", po::value<std::string>(&type)->default_value("short"), "sample type: double, float, or short") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(0), "total number of samples to receive") + ("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer") + ("rate", po::value<double>(&rate), "rate of incoming samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "waveform type (internal, external, mimo)") + ("wirefmt", po::value<std::string>(&wirefmt)->default_value("sc16"), "wire format (sc8 or sc16)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX samples to file %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //Lock mboard clocks + usrp->set_clock_source(ref); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_rx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f MHz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting RX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_rx_bandwidth(bw); + std::cout << boost::format("Actual RX Bandwidth: %f MHz...") % usrp->get_rx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_rx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //Check Ref and LO Lock detect + std::vector<std::string> sensor_names; + sensor_names = usrp->get_rx_sensor_names(0); + if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) { + uhd::sensor_value_t lo_locked = usrp->get_rx_sensor("lo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking RX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + if (total_num_samps == 0){ + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + } + + //recv to file + if (type == "double") recv_to_file<std::complex<double> >(usrp, "fc64", wirefmt, file, spb, total_num_samps); + else if (type == "float") recv_to_file<std::complex<float> >(usrp, "fc32", wirefmt, file, spb, total_num_samps); + else if (type == "short") recv_to_file<std::complex<short> >(usrp, "sc16", wirefmt, file, spb, total_num_samps); + else throw std::runtime_error("Unknown type " + type); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_samples_to_udp.cpp b/host/examples/rx_samples_to_udp.cpp new file mode 100644 index 000000000..42b80762f --- /dev/null +++ b/host/examples/rx_samples_to_udp.cpp @@ -0,0 +1,172 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/transport/udp_simple.hpp> +#include <uhd/exception.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, file, ant, subdev, ref; + size_t total_num_samps; + double rate, freq, gain, bw; + std::string addr, port; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(1000), "total number of samples to receive") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("freq", po::value<double>(&freq)->default_value(0), "rf center frequency in Hz") + ("gain", po::value<double>(&gain)->default_value(0), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ("port", po::value<std::string>(&port)->default_value("7124"), "server udp port") + ("addr", po::value<std::string>(&addr)->default_value("192.168.1.10"), "resolvable server address") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "waveform type (internal, external, mimo)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX to UDP %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //Lock mboard clocks + usrp->set_clock_source(ref); + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the rx center frequency + std::cout << boost::format("Setting RX Freq: %f Mhz...") % (freq/1e6) << std::endl; + usrp->set_rx_freq(freq); + std::cout << boost::format("Actual RX Freq: %f Mhz...") % (usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the rx rf gain + std::cout << boost::format("Setting RX Gain: %f dB...") % gain << std::endl; + usrp->set_rx_gain(gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % usrp->get_rx_gain() << std::endl << std::endl; + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting RX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_rx_bandwidth(bw); + std::cout << boost::format("Actual RX Bandwidth: %f MHz...") % usrp->get_rx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_rx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //Check Ref and LO Lock detect + std::vector<std::string> sensor_names; + sensor_names = usrp->get_rx_sensor_names(0); + if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) { + uhd::sensor_value_t lo_locked = usrp->get_rx_sensor("lo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking RX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + //create a receive streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //setup streaming + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = true; + usrp->issue_stream_cmd(stream_cmd); + + //loop until total number of samples reached + size_t num_acc_samps = 0; //number of accumulated samples + uhd::rx_metadata_t md; + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + uhd::transport::udp_simple::sptr udp_xport = uhd::transport::udp_simple::make_connected(addr, port); + + while(num_acc_samps < total_num_samps){ + size_t num_rx_samps = rx_stream->recv( + &buff.front(), buff.size(), md + ); + + //handle the error codes + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_NONE: + break; + + case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT: + if (num_acc_samps == 0) continue; + std::cout << boost::format( + "Got timeout before all samples received, possible packet loss, exiting loop..." + ) << std::endl; + goto done_loop; + + default: + std::cout << boost::format( + "Got error code 0x%x, exiting loop..." + ) % md.error_code << std::endl; + goto done_loop; + } + + //send complex single precision floating point samples over udp + udp_xport->send(boost::asio::buffer(buff, num_rx_samps)); + + num_acc_samps += num_rx_samps; + } done_loop: + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/rx_timed_samples.cpp b/host/examples/rx_timed_samples.cpp new file mode 100644 index 000000000..143bceb03 --- /dev/null +++ b/host/examples/rx_timed_samples.cpp @@ -0,0 +1,128 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double seconds_in_future; + size_t total_num_samps; + double rate; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to receive") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to receive") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of incoming samples") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD RX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the rx sample rate + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_rx_rate(rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //create a receive streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //setup streaming + std::cout << std::endl; + std::cout << boost::format( + "Begin streaming %u samples, %f seconds in the future..." + ) % total_num_samps % seconds_in_future << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(seconds_in_future); + usrp->issue_stream_cmd(stream_cmd); + + //meta-data will be filled in by recv() + uhd::rx_metadata_t md; + + //allocate buffer to receive with samples + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + + //the first call to recv() will block this many seconds before receiving + double timeout = seconds_in_future + 0.1; //timeout (delay before receive + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + //receive a single packet + size_t num_rx_samps = rx_stream->recv( + &buff.front(), buff.size(), md, timeout, true + ); + + //use a small timeout for subsequent packets + timeout = 0.1; + + //handle the error code + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + if(verbose) std::cout << boost::format( + "Received packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + + num_acc_samps += num_rx_samps; + } + + if (num_acc_samps < total_num_samps) std::cerr << "Receive timeout before all samples received..." << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/test_dboard_coercion.cpp b/host/examples/test_dboard_coercion.cpp new file mode 100644 index 000000000..5b1e9f0e2 --- /dev/null +++ b/host/examples/test_dboard_coercion.cpp @@ -0,0 +1,577 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> +#include <complex> +#include <vector> + +namespace po = boost::program_options; + +/************************************************************************ + * Misc functions +************************************************************************/ + +std::string return_MHz_string(double freq){ + std::string nice_string = std::string(str(boost::format("%5.2f MHz") % (freq / 1e6))); + return nice_string; +} + +std::string return_USRP_config_string(uhd::usrp::multi_usrp::sptr usrp, bool test_tx, bool test_rx){ + uhd::dict<std::string, std::string> tx_info = usrp->get_usrp_tx_info(); + uhd::dict<std::string, std::string> rx_info = usrp->get_usrp_rx_info(); + std::string info_string; + std::string mboard_id, mboard_serial; + std::string tx_serial, tx_subdev_name, tx_subdev_spec; + std::string rx_serial, rx_subdev_name, rx_subdev_spec; + + mboard_id = tx_info.get("mboard_id"); + if(tx_info.get("mboard_serial") != "") mboard_serial = tx_info.get("mboard_serial"); + else mboard_serial = "no serial"; + + info_string = std::string(str(boost::format("Motherboard: %s (%s)\n") % mboard_id % mboard_serial)); + + if(test_tx){ + if(tx_info.get("tx_serial") != "") tx_serial = tx_info.get("tx_serial"); + else tx_serial = "no serial"; + tx_subdev_name = tx_info.get("tx_subdev_name"); + tx_subdev_spec = tx_info.get("tx_subdev_spec"); + + info_string += std::string(str(boost::format("TX: %s (%s, %s)") % tx_subdev_name % tx_serial % tx_subdev_spec)); + } + if(test_tx and test_rx) info_string += "\n"; + if(test_rx){ + if(rx_info.get("rx_serial") != "") rx_serial = rx_info.get("rx_serial"); + else rx_serial = "no serial"; + rx_subdev_name = rx_info.get("rx_subdev_name"); + rx_subdev_spec = rx_info.get("rx_subdev_spec"); + + info_string += std::string(str(boost::format("RX: %s (%s, %s)") % rx_subdev_name % rx_serial % rx_subdev_spec)); + } + + return info_string; +} + +/************************************************************************ + * TX Frequency/Gain Coercion +************************************************************************/ + +std::string tx_test(uhd::usrp::multi_usrp::sptr usrp, bool test_gain, bool verbose){ + + //Establish frequency range + + std::vector<double> freqs; + std::vector<double> xcvr_freqs; + + BOOST_FOREACH(const uhd::range_t &range, usrp->get_fe_tx_freq_range()){ + double freq_begin = range.start(); + double freq_end = range.stop(); + double freq_step; + + if(usrp->get_usrp_tx_info().get("tx_subdev_name") == "XCVR2450 TX"){ + xcvr_freqs.push_back(freq_begin); + xcvr_freqs.push_back(freq_end); + } + + if(freq_end - freq_begin > 1000e6) freq_step = 100e6; + else if(freq_end - freq_begin < 300e6) freq_step = 10e6; + else freq_step = 50e6; + + double current_freq = freq_begin; + + while(current_freq < freq_end){ + freqs.push_back(current_freq); + current_freq += freq_step; + } + if(freq_end != *freqs.end()) freqs.push_back(freq_end); + } + + std::vector<double> gains; + + if(test_gain){ + + //Establish gain range + + double gain_begin = usrp->get_tx_gain_range().start(); + if(gain_begin < 0.0) gain_begin = 0.0; + double gain_end = usrp->get_tx_gain_range().stop(); + + double current_gain = gain_begin; + while(current_gain < gain_end){ + gains.push_back(current_gain); + current_gain++; + } + if(gain_end != *gains.end()) gains.push_back(gain_end); + + } + + //Establish error-storing variables + + std::vector<double> bad_tune_freqs; + std::vector<double> no_lock_freqs; + std::vector< std::vector< double > > bad_gain_vals; + std::vector<std::string> dboard_sensor_names = usrp->get_tx_sensor_names(); + std::vector<std::string> mboard_sensor_names = usrp->get_mboard_sensor_names(); + bool has_sensor = (std::find(dboard_sensor_names.begin(), dboard_sensor_names.end(), "lo_locked")) != dboard_sensor_names.end(); + + for(std::vector<double>::iterator f = freqs.begin(); f != freqs.end(); ++f){ + + //Testing for successful frequency tune + + usrp->set_tx_freq(*f); + boost::this_thread::sleep(boost::posix_time::microseconds(long(1000))); + + double actual_freq = usrp->get_tx_freq(); + + if(*f == 0.0){ + if(floor(actual_freq + 0.5) == 0.0){ + if(verbose) std::cout << boost::format("\nTX frequency successfully tuned to %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("\nTX frequency tuned to %s instead of %s.") % return_MHz_string(actual_freq) % return_MHz_string(*f) << std::endl; + } + } + else{ + if((*f / actual_freq > 0.9999) and (*f / actual_freq < 1.0001)){ + if(verbose) std::cout << boost::format("\nTX frequency successfully tuned to %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("\nTX frequency tuned to %s instead of %s.") % return_MHz_string(actual_freq) % return_MHz_string(*f) << std::endl; + bad_tune_freqs.push_back(*f); + } + } + + //Testing for successful lock + + if(has_sensor){ + bool is_locked = false; + for(int i = 0; i < 1000; i++){ + boost::this_thread::sleep(boost::posix_time::microseconds(1000)); + if(usrp->get_tx_sensor("lo_locked",0).to_bool()){ + is_locked = true; + break; + } + } + if(is_locked){ + if(verbose) std::cout << boost::format("LO successfully locked at TX frequency %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("LO did not successfully lock at TX frequency %s.") % return_MHz_string(*f) << std::endl; + no_lock_freqs.push_back(*f); + } + } + + if(test_gain){ + + //Testing for successful gain tune + + for(std::vector<double>::iterator g = gains.begin(); g != gains.end(); ++g){ + usrp->set_tx_gain(*g); + boost::this_thread::sleep(boost::posix_time::microseconds(1000)); + + double actual_gain = usrp->get_tx_gain(); + + if(*g == 0.0){ + if(actual_gain == 0.0){ + if(verbose) std::cout << boost::format("TX gain successfully set to %5.2f at TX frequency %s.") % *g % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("TX gain set to %5.2f instead of %5.2f at TX frequency %s.") % actual_gain % *g % return_MHz_string(*f) << std::endl; + std::vector<double> bad_gain_freq; + bad_gain_freq.push_back(*f); + bad_gain_freq.push_back(*g); + bad_gain_vals.push_back(bad_gain_freq); + } + } + else{ + if((*g / actual_gain) > 0.9 and (*g / actual_gain) < 1.1){ + if(verbose) std::cout << boost::format("TX gain successfully set to %5.2f at TX frequency %s.") % *g % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("TX gain set to %5.2f instead of %5.2f at TX frequency %s.") % actual_gain % *g % return_MHz_string(*f) << std::endl; + std::vector<double> bad_gain_freq; + bad_gain_freq.push_back(*f); + bad_gain_freq.push_back(*g); + bad_gain_vals.push_back(bad_gain_freq); + } + } + } + } + } + + std::string tx_results = "TX Summary:\n"; + if(usrp->get_usrp_tx_info().get("tx_subdev_name") == "XCVR2450 TX"){ + tx_results += std::string(str(boost::format("Frequency Range: %s - %s, %s - %s\n") % return_MHz_string(xcvr_freqs.at(0)) % return_MHz_string(xcvr_freqs.at(1)) % + return_MHz_string(xcvr_freqs.at(2)) % return_MHz_string(xcvr_freqs.at(3)))); + } + else tx_results += std::string(str(boost::format("Frequency Range: %s - %s\n") % return_MHz_string(freqs.front()) % return_MHz_string(freqs.back()))); + if(test_gain) tx_results += std::string(str(boost::format("Gain Range: %5.2f - %5.2f\n") % gains.front() % gains.back())); + + if(bad_tune_freqs.empty()) tx_results += "USRP successfully tuned to all frequencies."; + else{ + tx_results += "USRP did not successfully tune to the following frequencies: "; + for(std::vector<double>::iterator i = bad_tune_freqs.begin(); i != bad_tune_freqs.end(); ++i){ + if(i != bad_tune_freqs.begin()) tx_results += ", "; + tx_results += return_MHz_string(*i); + } + } + if(has_sensor){ + + tx_results += "\n"; + if(no_lock_freqs.empty()) tx_results += "LO successfully locked at all frequencies."; + else{ + tx_results += "LO did not lock at the following frequencies: "; + for(std::vector<double>::iterator i = no_lock_freqs.begin(); i != no_lock_freqs.end(); ++i){ + if(i != no_lock_freqs.begin()) tx_results += ", "; + tx_results += return_MHz_string(*i); + } + } + } + if(test_gain){ + tx_results += "\n"; + if(bad_gain_vals.empty()) tx_results += "USRP successfully set all specified gain values at all frequencies."; + else{ + tx_results += "USRP did not successfully set gain under the following circumstances:"; + for(std::vector< std::vector<double> >::iterator i = bad_gain_vals.begin(); i != bad_gain_vals.end(); ++i){ + std::vector<double> bad_pair = *i; + double bad_freq = bad_pair.front(); + double bad_gain = bad_pair.back(); + tx_results += std::string(str(boost::format("\nFrequency: %s, Gain: %5.2f") % return_MHz_string(bad_freq) % bad_gain)); + } + } + } + + return tx_results; +} + +/************************************************************************ + * RX Frequency/Gain Coercion +************************************************************************/ + +std::string rx_test(uhd::usrp::multi_usrp::sptr usrp, bool test_gain, bool verbose){ + + //Establish frequency range + + std::vector<double> freqs; + std::vector<double> xcvr_freqs; + + BOOST_FOREACH(const uhd::range_t &range, usrp->get_fe_rx_freq_range()){ + double freq_begin = range.start(); + double freq_end = range.stop(); + + if(usrp->get_usrp_rx_info().get("rx_subdev_name") == "XCVR2450 RX"){ + xcvr_freqs.push_back(freq_begin); + xcvr_freqs.push_back(freq_end); + } + + double freq_step; + + if(freq_end - freq_begin > 1000e6) freq_step = 100e6; + else if(freq_end - freq_begin < 300e6) freq_step = 10e6; + else freq_step = 50e6; + + double current_freq = freq_begin; + + while(current_freq < freq_end){ + freqs.push_back(current_freq); + current_freq += freq_step; + } + } + + std::vector<double> gains; + + if(test_gain){ + + //Establish gain range + + double gain_begin = usrp->get_rx_gain_range().start(); + if(gain_begin < 0.0) gain_begin = 0.0; + double gain_end = usrp->get_rx_gain_range().stop(); + + double current_gain = gain_begin; + while(current_gain < gain_end){ + gains.push_back(current_gain); + current_gain++; + } + if(gain_end != *gains.end()) gains.push_back(gain_end); + + } + + //Establish error-storing variables + + std::vector<double> bad_tune_freqs; + std::vector<double> no_lock_freqs; + std::vector< std::vector< double > > bad_gain_vals; + std::vector<std::string> dboard_sensor_names = usrp->get_rx_sensor_names(); + std::vector<std::string> mboard_sensor_names = usrp->get_mboard_sensor_names(); + bool has_sensor = (std::find(dboard_sensor_names.begin(), dboard_sensor_names.end(), "lo_locked")) != dboard_sensor_names.end(); + + for(std::vector<double>::iterator f = freqs.begin(); f != freqs.end(); ++f){ + + //Testing for successful frequency tune + + usrp->set_rx_freq(*f); + boost::this_thread::sleep(boost::posix_time::microseconds(long(1000))); + + double actual_freq = usrp->get_rx_freq(); + + if(*f == 0.0){ + if(floor(actual_freq + 0.5) == 0.0){ + if(verbose) std::cout << boost::format("\nRX frequency successfully tuned to %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("\nRX frequency tuned to %s instead of %s.") % return_MHz_string(actual_freq) % return_MHz_string(*f) << std::endl; + } + } + else{ + if((*f / actual_freq > 0.9999) and (*f / actual_freq < 1.0001)){ + if(verbose) std::cout << boost::format("\nRX frequency successfully tuned to %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("\nRX frequency tuned to %s instead of %s.") % return_MHz_string(actual_freq) % return_MHz_string(*f) << std::endl; + bad_tune_freqs.push_back(*f); + } + } + + //Testing for successful lock + + if(has_sensor){ + bool is_locked = false; + for(int i = 0; i < 1000; i++){ + boost::this_thread::sleep(boost::posix_time::microseconds(1000)); + if(usrp->get_rx_sensor("lo_locked",0).to_bool()){ + is_locked = true; + break; + } + } + if(is_locked){ + if(verbose) std::cout << boost::format("LO successfully locked at RX frequency %s.") % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("LO did not successfully lock at RX frequency %s.") % return_MHz_string(*f) << std::endl; + no_lock_freqs.push_back(*f); + } + } + + if(test_gain){ + + //Testing for successful gain tune + + for(std::vector<double>::iterator g = gains.begin(); g != gains.end(); ++g){ + usrp->set_rx_gain(*g); + boost::this_thread::sleep(boost::posix_time::microseconds(1000)); + + double actual_gain = usrp->get_rx_gain(); + + if(*g == 0.0){ + if(actual_gain == 0.0){ + if(verbose) std::cout << boost::format("RX gain successfully set to %5.2f at RX frequency %s.") % *g % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("RX gain set to %5.2f instead of %5.2f at RX frequency %s.") % actual_gain % *g % return_MHz_string(*f) << std::endl; + std::vector<double> bad_gain_freq; + bad_gain_freq.push_back(*f); + bad_gain_freq.push_back(*g); + bad_gain_vals.push_back(bad_gain_freq); + } + } + else{ + if((*g / actual_gain) > 0.9 and (*g / actual_gain) < 1.1){ + if(verbose) std::cout << boost::format("RX gain successfully set to %5.2f at RX frequency %s.") % *g % return_MHz_string(*f) << std::endl; + } + else{ + if(verbose) std::cout << boost::format("RX gain set to %5.2f instead of %5.2f at RX frequency %s.") % actual_gain % *g % return_MHz_string(*f) << std::endl; + std::vector<double> bad_gain_freq; + bad_gain_freq.push_back(*f); + bad_gain_freq.push_back(*g); + bad_gain_vals.push_back(bad_gain_freq); + } + } + } + } + } + + std::string rx_results = "RX Summary:\n"; + if(usrp->get_usrp_rx_info().get("rx_subdev_name") == "XCVR2450 RX"){ + rx_results += std::string(str(boost::format("Frequency Range: %s - %s, %s - %s\n") % return_MHz_string(xcvr_freqs.at(0)) % return_MHz_string(xcvr_freqs.at(1)) % + return_MHz_string(xcvr_freqs.at(2)) % return_MHz_string(xcvr_freqs.at(3)))); + } + else rx_results += std::string(str(boost::format("Frequency Range: %s - %s\n") % return_MHz_string(freqs.front()) % return_MHz_string(freqs.back()))); + if(test_gain) rx_results += std::string(str(boost::format("Gain Range: %5.2f - %5.2f\n") % gains.front() % gains.back())); + + if(bad_tune_freqs.empty()) rx_results += "USRP successfully tuned to all frequencies."; + else{ + rx_results += "USRP did not successfully tune to the following frequencies: "; + for(std::vector<double>::iterator i = bad_tune_freqs.begin(); i != bad_tune_freqs.end(); ++i){ + if(i != bad_tune_freqs.begin()) rx_results += ", "; + rx_results += return_MHz_string(*i); + } + } + if(has_sensor){ + + rx_results += "\n"; + if(no_lock_freqs.empty()) rx_results += "LO successfully locked at all frequencies."; + else{ + rx_results += "LO did not successfully lock at the following frequencies: "; + for(std::vector<double>::iterator i = no_lock_freqs.begin(); i != no_lock_freqs.end(); ++i){ + if( i != no_lock_freqs.begin()) rx_results += ", "; + rx_results += return_MHz_string(*i); + } + } + } + if(test_gain){ + rx_results += "\n"; + if(bad_gain_vals.empty()) rx_results += "USRP successfully set all specified gain values at all frequencies."; + else{ + rx_results += "USRP did not successfully set gain under the following circumstances:"; + for(std::vector< std::vector<double> >::iterator i = bad_gain_vals.begin(); i != bad_gain_vals.end(); ++i){ + std::vector<double> bad_pair = *i; + double bad_freq = bad_pair.front(); + double bad_gain = bad_pair.back(); + rx_results += std::string(str(boost::format("\nFrequency: %s, Gain: %5.2f") % return_MHz_string(bad_freq) % bad_gain)); + } + } + } + + return rx_results; +} + +/************************************************************************ + * Initial Setup +************************************************************************/ + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + + //Variables + std::string args; + double gain_step; + std::string ref; + std::string tx_results; + std::string rx_results; + std::string usrp_config; + + //Set up the program options + po::options_description desc("Allowed Options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "Specify the UHD device") + ("gain_step", po::value<double>(&gain_step)->default_value(1.0), "Specify the delta between gain scans") + ("tx", "Specify to test TX frequency and gain coercion") + ("rx", "Specify to test RX frequency and gain coercion") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "Waveform type: internal, external, or mimo") + ("no_tx_gain", "Do not test TX gain") + ("no_rx_gain", "Do not test RX gain") + ("verbose", "Output every frequency and gain check instead of just final summary") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //Create a USRP device + std::cout << std::endl; + uhd::device_addrs_t device_addrs = uhd::device::find(args); + std::cout << boost::format("Creating the USRP device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << std::endl << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + usrp->set_tx_rate(1e6); + usrp->set_rx_rate(1e6); + + //Boolean variables based on command line input + bool test_tx = vm.count("tx") > 0; + bool test_rx = vm.count("rx") > 0; + bool test_tx_gain = !(vm.count("no_tx_gain") > 0) and (usrp->get_tx_gain_range().stop() > 0); + bool test_rx_gain = !(vm.count("no_rx_gain") > 0) and (usrp->get_rx_gain_range().stop() > 0); + bool verbose = vm.count("verbose") > 0; + + //Help messages, errors + if(vm.count("help") > 0){ + std::cout << "UHD Daughterboard Coercion Test\n" + "This program tests your USRP daughterboard(s) to\n" + "make sure that they can successfully tune to all\n" + "frequencies and gains in their advertised ranges.\n\n"; + std::cout << desc << std::endl; + return ~0; + } + + if(ref != "internal" and ref != "external" and ref != "mimo"){ + std::cout << desc << std::endl; + std::cout << "REF must equal internal, external, or mimo." << std::endl; + return ~0; + } + + if(vm.count("tx") + vm.count("rx") == 0){ + std::cout << desc << std::endl; + std::cout << "Specify --tx to test for TX frequency coercion\n" + "Specify --rx to test for RX frequency coercion\n"; + return ~0; + } + + if(test_rx and usrp->get_usrp_rx_info().get("rx_id") == "Basic RX (0x0001)"){ + std::cout << desc << std::endl; + std::cout << "This test does not work with the Basic RX daughterboard." << std::endl; + return ~0; + } + else if(test_rx and usrp->get_usrp_rx_info().get("rx_id") == "Unknown (0xffff)"){ + std::cout << desc << std::endl; + std::cout << "This daughterboard is unrecognized, or there is no RX daughterboard." << std::endl; + return ~0; + } + + if(test_tx and usrp->get_usrp_tx_info().get("tx_id") == "Basic TX (0x0000)"){ + std::cout << desc << std::endl; + std::cout << "This test does not work with the Basic TX daughterboard." << std::endl; + return ~0; + } + else if(test_tx and usrp->get_usrp_tx_info().get("tx_id") == "Unknown (0xffff)"){ + std::cout << desc << std::endl; + std::cout << "This daughterboard is unrecognized, or there is no TX daughterboard." << std::endl; + return ~0; + } + + //Setting clock source + usrp->set_clock_source(ref); + boost::this_thread::sleep(boost::posix_time::seconds(1)); + + std::vector<std::string> sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking MIMO lock: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking REF lock: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + usrp_config = return_USRP_config_string(usrp, test_tx, test_rx); + if(test_tx) tx_results = tx_test(usrp, test_tx_gain, verbose); + if(test_rx) rx_results = rx_test(usrp, test_rx_gain, verbose); + + if(verbose) std::cout << std::endl; + std::cout << usrp_config << std::endl << std::endl; + if(test_tx) std::cout << tx_results << std::endl; + if(test_tx and test_rx) std::cout << std::endl; + if(test_rx) std::cout << rx_results << std::endl; + + return 0; +} diff --git a/host/examples/test_messages.cpp b/host/examples/test_messages.cpp new file mode 100644 index 000000000..afb092092 --- /dev/null +++ b/host/examples/test_messages.cpp @@ -0,0 +1,354 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/types/stream_cmd.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/assign/list_of.hpp> +#include <boost/program_options.hpp> +#include <boost/foreach.hpp> +#include <boost/bind.hpp> +#include <boost/format.hpp> +#include <cstdlib> +#include <ctime> +#include <complex> +#include <iostream> + +namespace po = boost::program_options; + +/*! + * Test the late command message: + * Issue a stream command with a time that is in the past. + * We expect to get an inline late command message. + */ +bool test_late_command_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr rx_stream, uhd::tx_streamer::sptr){ + std::cout << "Test late command message... " << std::flush; + + usrp->set_time_now(uhd::time_spec_t(200.0)); //set time + + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = rx_stream->get_max_num_samps(); + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(100.0); //time in the past + usrp->issue_stream_cmd(stream_cmd); + + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + uhd::rx_metadata_t md; + + const size_t nsamps = rx_stream->recv( + &buff.front(), buff.size(), md + ); + + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_LATE_COMMAND: + std::cout << boost::format( + "success:\n" + " Got error code late command message.\n" + ) << std::endl; + return true; + + case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT: + std::cout << boost::format( + "failed:\n" + " Inline message recv timed out.\n" + ) << std::endl; + return false; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected error code 0x%x, nsamps %u.\n" + ) % md.error_code % nsamps << std::endl; + return false; + } +} + +/*! + * Test the broken chain message: + * Issue a stream command with num samps and more. + * We expect to get an inline broken chain message. + */ +bool test_broken_chain_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr rx_stream, uhd::tx_streamer::sptr){ + std::cout << "Test broken chain message... " << std::flush; + + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_MORE); + stream_cmd.stream_now = true; + stream_cmd.num_samps = rx_stream->get_max_num_samps(); + usrp->issue_stream_cmd(stream_cmd); + + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + uhd::rx_metadata_t md; + + rx_stream->recv( //once for the requested samples + &buff.front(), buff.size(), md + ); + + rx_stream->recv( //again for the inline message + &buff.front(), buff.size(), md + ); + + switch(md.error_code){ + case uhd::rx_metadata_t::ERROR_CODE_BROKEN_CHAIN: + std::cout << boost::format( + "success:\n" + " Got error code broken chain message.\n" + ) << std::endl; + return true; + + case uhd::rx_metadata_t::ERROR_CODE_TIMEOUT: + std::cout << boost::format( + "failed:\n" + " Inline message recv timed out.\n" + ) << std::endl; + return false; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected error code 0x%x.\n" + ) % md.error_code << std::endl; + return false; + } +} + +/*! + * Test the burst ack message: + * Send a burst of many samples that will fragment internally. + * We expect to get an burst ack async message. + */ +bool test_burst_ack_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){ + std::cout << "Test burst ack message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = true; + md.has_time_spec = false; + + //3 times max-sps guarantees a SOB, no burst, and EOB packet + std::vector<std::complex<float> > buff(tx_stream->get_max_num_samps()*3); + + tx_stream->send( + &buff.front(), buff.size(), md + ); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_BURST_ACK: + std::cout << boost::format( + "success:\n" + " Got event code burst ack message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +/*! + * Test the underflow message: + * Send a start of burst packet with no following end of burst. + * We expect to get an underflow(within a burst) async message. + */ +bool test_underflow_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){ + std::cout << "Test underflow message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = false; + md.has_time_spec = false; + + tx_stream->send("", 0, md); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md, 1)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_UNDERFLOW: + std::cout << boost::format( + "success:\n" + " Got event code underflow message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +/*! + * Test the time error message: + * Send a burst packet that occurs at a time in the past. + * We expect to get a time error async message. + */ +bool test_time_error_message(uhd::usrp::multi_usrp::sptr usrp, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr tx_stream){ + std::cout << "Test time error message... " << std::flush; + + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = true; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(100.0); //send at 100s + + usrp->set_time_now(uhd::time_spec_t(200.0)); //time at 200s + + tx_stream->send("", 0, md); + + uhd::async_metadata_t async_md; + if (not usrp->get_device()->recv_async_msg(async_md)){ + std::cout << boost::format( + "failed:\n" + " Async message recv timed out.\n" + ) << std::endl; + return false; + } + + switch(async_md.event_code){ + case uhd::async_metadata_t::EVENT_CODE_TIME_ERROR: + std::cout << boost::format( + "success:\n" + " Got event code time error message.\n" + ) << std::endl; + return true; + + default: + std::cout << boost::format( + "failed:\n" + " Got unexpected event code 0x%x.\n" + ) % async_md.event_code << std::endl; + return false; + } +} + +void flush_async(uhd::usrp::multi_usrp::sptr usrp){ + uhd::async_metadata_t async_md; + while (usrp->get_device()->recv_async_msg(async_md)){} +} + +void flush_recv(uhd::rx_streamer::sptr rx_stream){ + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + uhd::rx_metadata_t md; + + do{ + rx_stream->recv(&buff.front(), buff.size(), md); + } while (md.error_code != uhd::rx_metadata_t::ERROR_CODE_TIMEOUT); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + size_t ntests; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("ntests", po::value<size_t>(&ntests)->default_value(50), "number of tests to run") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Test Messages %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //create RX and TX streamers + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //------------------------------------------------------------------ + // begin messages test + //------------------------------------------------------------------ + static const uhd::dict<std::string, boost::function<bool(uhd::usrp::multi_usrp::sptr, uhd::rx_streamer::sptr, uhd::tx_streamer::sptr)> > + tests = boost::assign::map_list_of + ("Test Burst ACK ", &test_burst_ack_message) + ("Test Underflow ", &test_underflow_message) + ("Test Time Error", &test_time_error_message) + ("Test Late Command", &test_late_command_message) + ("Test Broken Chain", &test_broken_chain_message) + ; + + //init result counts + uhd::dict<std::string, size_t> failures, successes; + BOOST_FOREACH(const std::string &key, tests.keys()){ + failures[key] = 0; + successes[key] = 0; + } + + //run the tests, pick at random + std::srand((unsigned int) time(NULL)); + for (size_t n = 0; n < ntests; n++){ + std::string key = tests.keys()[std::rand() % tests.size()]; + bool pass = tests[key](usrp, rx_stream, tx_stream); + flush_async(usrp); + flush_recv(rx_stream); + + //store result + if (pass) successes[key]++; + else failures[key]++; + } + + //print the result summary + std::cout << std::endl << "Summary:" << std::endl << std::endl; + BOOST_FOREACH(const std::string &key, tests.keys()){ + std::cout << boost::format( + "%s -> %3u successes, %3u failures" + ) % key % successes[key] % failures[key] << std::endl; + } + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/test_pps_input.cpp b/host/examples/test_pps_input.cpp new file mode 100644 index 000000000..994b7ca87 --- /dev/null +++ b/host/examples/test_pps_input.cpp @@ -0,0 +1,62 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Test PPS Input %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the time at an unknown pps (will throw if no pps) + std::cout << std::endl << "Attempt to detect the PPS and set the time..." << std::endl << std::endl; + usrp->set_time_unknown_pps(uhd::time_spec_t(0.0)); + std::cout << std::endl << "Success!" << std::endl << std::endl; + return 0; +} diff --git a/host/examples/test_timed_commands.cpp b/host/examples/test_timed_commands.cpp new file mode 100644 index 000000000..34c83dfd6 --- /dev/null +++ b/host/examples/test_timed_commands.cpp @@ -0,0 +1,129 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD Test Timed Commands %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //check if timed commands are supported + std::cout << std::endl; + std::cout << "Testing support for timed commands on this hardware... " << std::flush; + try{ + usrp->set_command_time(uhd::time_spec_t(0.0)); + usrp->clear_command_time(); + } + catch (const std::exception &e){ + std::cout << "fail" << std::endl; + std::cerr << "Got exception: " << e.what() << std::endl; + std::cerr << "Timed commands are not supported on this hardware." << std::endl; + return ~0; + } + std::cout << "pass" << std::endl; + + //readback time really fast, time diff is small + std::cout << std::endl; + std::cout << "Perform fast readback of registers:" << std::endl; + uhd::time_spec_t total_time; + for (size_t i = 0; i < 100; i++){ + const uhd::time_spec_t t0 = usrp->get_time_now(); + const uhd::time_spec_t t1 = usrp->get_time_now(); + total_time += (t1-t0); + } + std::cout << boost::format( + "Difference between paired reads: %f us" + ) % (total_time.get_real_secs()/100*1e6) << std::endl; + + //use a timed command to start a stream at a specific time + //this is not the right way start streaming at time x, + //but it should approximate it within control RTT/2 + //setup streaming + std::cout << std::endl; + std::cout << "About to start streaming using timed command:" << std::endl; + + //create a receive streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = 100; + stream_cmd.stream_now = true; + const uhd::time_spec_t stream_time = usrp->get_time_now() + uhd::time_spec_t(0.1); + usrp->set_command_time(stream_time); + usrp->issue_stream_cmd(stream_cmd); + usrp->clear_command_time(); + + //meta-data will be filled in by recv() + uhd::rx_metadata_t md; + + //allocate buffer to receive with samples + std::vector<std::complex<float> > buff(stream_cmd.num_samps); + + const size_t num_rx_samps = rx_stream->recv(&buff.front(), buff.size(), md); + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + std::cout << boost::format( + "Received packet: %u samples, %u full secs, %f frac secs" + ) % num_rx_samps % md.time_spec.get_full_secs() % md.time_spec.get_frac_secs() << std::endl; + std::cout << boost::format( + "Stream time was: %u full secs, %f frac secs" + ) % stream_time.get_full_secs() % stream_time.get_frac_secs() << std::endl; + std::cout << boost::format( + "Difference between stream time and first packet: %f us" + ) % ((md.time_spec-stream_time).get_real_secs()/100*1e6) << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/transport_hammer.cpp b/host/examples/transport_hammer.cpp new file mode 100644 index 000000000..597614050 --- /dev/null +++ b/host/examples/transport_hammer.cpp @@ -0,0 +1,340 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread/thread.hpp> +#include <boost/math/special_functions/round.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +/************************************************************************ + * RX Samples + ************************************************************************/ + +void rx_hammer(uhd::usrp::multi_usrp::sptr usrp, double rx_rate, bool rx_rand, int rx_low, int rx_high, int rx_step, bool verbose){ + uhd::set_thread_priority_safe(); + + //Set RX sample rate + std::cout << boost::format("Setting RX rate: %f Msps") % (rx_rate/1e6) << std::endl; + usrp->set_rx_rate(rx_rate); + std::cout << boost::format("Actual RX rate: %f Msps") % (usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + if(rx_rand){ + std::srand((unsigned int) time(NULL)); + + while(true){ + size_t total_num_samps = (rand() % (rx_high - rx_low)) + rx_low; + + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //Create a receive streamer + uhd::stream_args_t stream_args("fc32"); + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + std::cout << boost::format("About to receive %u samples.") % total_num_samps << std::endl; + + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = total_num_samps; + stream_cmd.stream_now = true; + usrp->issue_stream_cmd(stream_cmd); + + //Metadata will be filled in by recv() + uhd::rx_metadata_t md; + + //Allocate buffer to receive with samples + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + double timeout = 1; + + size_t num_acc_samps = 0; //Number of accumulated samples + while(num_acc_samps < total_num_samps){ + //Receive a single packet + size_t num_rx_samps = rx_stream->recv( + &buff.front(), buff.size(), md, timeout, true + ); + + //Handle the error code + if(md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT){std::cout << "timeout" << std::endl; break;} + if(md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE && md.error_code != uhd::rx_metadata_t::ERROR_CODE_OVERFLOW){ + std::cout << "Error" << std::endl; + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + num_acc_samps += num_rx_samps; + } + + if(num_acc_samps < total_num_samps) std::cerr << "Received timeout before all samples were received..." << std::endl; + else std::cout << boost::format("Successfully received %u samples.") % total_num_samps << std::endl; + } + } + else{ + for(int i = int(rx_low); i <= int(rx_high); i += rx_step){ + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //Create a receive streamer + uhd::stream_args_t stream_args("fc32"); + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + //Set up streaming + std::cout << boost::format ("About to receive %u samples.") % i << std::endl; + uhd::stream_cmd_t stream_cmd(uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE); + stream_cmd.num_samps = i; + stream_cmd.stream_now = true; + usrp->issue_stream_cmd(stream_cmd); + + //Metadata will be filled in by recv() + uhd::rx_metadata_t md; + + //Allocate buffer to receive with samples + std::vector<std::complex<float> > buff(rx_stream->get_max_num_samps()); + + double timeout = 1; + + size_t num_acc_samps = 0; //Number of accumulated samples + while(int(num_acc_samps) < i){ + //Receive a single packet + size_t num_rx_samps = rx_stream->recv( + &buff.front(), buff.size(), md, timeout, true + ); + + //Handle the error code + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) break; + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE && md.error_code != uhd::rx_metadata_t::ERROR_CODE_OVERFLOW){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + if(verbose) std::cout << boost::format("Received %u samples.") % num_rx_samps << std::endl; + + num_acc_samps += num_rx_samps; + + } + std::cout << boost::format("Successfully received %u samples.") % i << std::endl; + + if (int(num_acc_samps) < i) std::cerr << "Timeout received before all samples were received..." << std::endl; + + } + } +} + +/************************************************************************ + * TX Samples + ************************************************************************/ + +void tx_hammer(uhd::usrp::multi_usrp::sptr usrp, double tx_rate, bool tx_rand, int tx_low, int tx_high, int tx_step, double tx_ampl, bool verbose){ + uhd::set_thread_priority_safe(); + + //Set the TX sample rate + std::cout << boost::format("Setting TX Rate: %f Msps...") % (tx_rate / 1e6) << std::endl; + usrp->set_tx_rate(tx_rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //Create a transmit streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //Allocate buffer with data to send + std::vector<std::complex<float> > buff(tx_stream->get_max_num_samps(), std::complex<float>(tx_ampl, tx_ampl)); + + //Setup metadata for the first packet + uhd::tx_metadata_t md; + md.start_of_burst = false; + md.end_of_burst = false; + md.has_time_spec = false; + + if(tx_rand){ + std::srand((unsigned int) time(NULL)); + + while(true){ + size_t total_num_samps = (rand() % (tx_high - tx_low)) + tx_low; + size_t num_acc_samps = 0; + float timeout = 1; + + std::cout << boost::format("About to send %u samples.") % total_num_samps << std::endl; + + usrp->set_time_now(uhd::time_spec_t(0.0)); + + while(num_acc_samps < total_num_samps){ + size_t samps_to_send = std::min(total_num_samps - num_acc_samps, buff.size()); + + //Send a single packet + size_t num_tx_samps = tx_stream->send(&buff.front(), samps_to_send, md, timeout); + + if(num_tx_samps < samps_to_send) std::cerr << "Send timeout..." << std::endl; + + num_acc_samps += num_tx_samps; + } + + md.end_of_burst = true; + tx_stream->send("", 0, md); + + if(verbose) std::cout << std::endl; + std::cout << "Waiting for async burst ACK... " << std::flush; + uhd::async_metadata_t async_md; + bool got_async_burst_ack = false; + + //Loop through all messages for the ACK packet (may have underflow messages in queue) + while (not got_async_burst_ack and usrp->get_device()->recv_async_msg(async_md, timeout)){ + got_async_burst_ack = (async_md.event_code == uhd::async_metadata_t::EVENT_CODE_BURST_ACK); + } + std::cout << (got_async_burst_ack? "Success!" : "Failure...") << std::endl; + + std::cout << boost::format("Successfully sent %u samples.") % total_num_samps << std::endl; + + } + } + else{ + float timeout = 1; + + for(int i = int(tx_low); i <= int(tx_high); i += tx_step){ + + usrp->set_time_now(uhd::time_spec_t(0.0)); + + std::cout << boost::format("About to send %u samples.") % i << std::endl; + if(verbose) std::cout << std::endl; + + size_t num_acc_samps = 0; //Number of accumulated samples + size_t total_num_samps = i; + + while(num_acc_samps < total_num_samps){ + size_t samps_to_send = std::min(total_num_samps - num_acc_samps, buff.size()); + + //Send a single packet + size_t num_tx_samps = tx_stream->send( + &buff.front(), samps_to_send, md, timeout + ); + + if (num_tx_samps < samps_to_send) std::cerr << "Send timeout..." << std::endl; + + num_acc_samps += num_tx_samps; + } + + //Send a mini EOB packet + md.end_of_burst = true; + tx_stream->send("", 0, md); + + std::cout << std::endl << "Waiting for async burst ACK... " << std::flush; + uhd::async_metadata_t async_md; + bool got_async_burst_ack = false; + //Loop through all messages for the ACK packet (may have underflow messages in queue) + while (not got_async_burst_ack and usrp->get_device()->recv_async_msg(async_md, timeout)){ + got_async_burst_ack = (async_md.event_code == uhd::async_metadata_t::EVENT_CODE_BURST_ACK); + } + std::cout << (got_async_burst_ack? "Success!" : "Failure...") << std::endl; + + } + //Finished + std::cout << "Done!" << std::endl; + } +} + +/************************************************************************ + * Main code + dispatcher + ************************************************************************/ + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //Variables to be set by program options + std::string args; + double rx_rate; + int rx_low; + int rx_high; + int rx_step; + double tx_rate; + int tx_low; + int tx_high; + int tx_step; + double tx_ampl; + + //Set up the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "Print this help message.") + ("args", po::value<std::string>(&args)->default_value(""), "Single UHD device address args.") + ("rx_rate", po::value<double>(&rx_rate), "RX sample rate.") + ("rx_rand", "Specify to use random amounts of RX samples (between rx_low and rx_high values).") + ("rx_low", po::value<int>(&rx_low)->default_value(1), "Lowest value of RX samples.") + ("rx_high", po::value<int>(&rx_high)->default_value(10000), "Highest value of RX samples.") + ("rx_step", po::value<int>(&rx_step)->default_value(10), "Delta between number of collected RX samples.") + ("tx_rate", po::value<double>(&tx_rate), "TX sample rate.") + ("tx_rand", "Specify to use random amounts of TX samples (between tx_low and tx_high values).") + ("tx_low", po::value<int>(&tx_low)->default_value(1), "Lowest value of TX samples.") + ("tx_high", po::value<int>(&tx_high)->default_value(10000), "Highest value of TX samples.") + ("tx_step", po::value<int>(&tx_step)->default_value(10), "Delta between number of sent TX samples.") + ("tx_ampl", po::value<double>(&tx_ampl)->default_value(0.5), "TX amplitude.") + ("verbose", "Enables verbosity") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //Set verbose or RX/TX random if requested by user + bool rx_rand = vm.count("rx_rand") > 0; + bool tx_rand = vm.count("tx_rand") > 0; + bool verbose = vm.count("verbose") > 0; + + //Print the help message + + if (vm.count("help") or (vm.count("rx_rate") + vm.count("tx_rate")) == 0){ + std::cout << boost::format("UHD Transport Hammer %s") % desc << std::endl; + std::cout << + " Specify --rx_rate for a receive-only test.\n" + " Specify --tx_rate for a transmit-only test.\n" + " Specify both options for a full-duplex test.\n" + << std::endl; + return ~0; + } + + //Create a USRP device + std::cout << std::endl; + uhd::device_addrs_t device_addrs = uhd::device::find(args); + std::cout << boost::format("Creating the USRP device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + boost::thread_group thread_group; + + //Spawn the receive test thread + if (vm.count("rx_rate")){ + usrp->set_rx_rate(rx_rate); + thread_group.create_thread(boost::bind(&rx_hammer, usrp, rx_rate, rx_rand, rx_low, rx_high, rx_step, verbose)); + } + + //Spawn the transmit test thread + if (vm.count("tx_rate")){ + usrp->set_tx_rate(tx_rate); + thread_group.create_thread(boost::bind(&tx_hammer, usrp, tx_rate, tx_rand, tx_low, tx_high, tx_step, tx_ampl, verbose)); + } + + //Interrupt and join the threads + boost::this_thread::sleep(boost::posix_time::microseconds(long(1e6))); + thread_group.interrupt_all(); + thread_group.join_all(); + //Finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_bursts.cpp b/host/examples/tx_bursts.cpp new file mode 100644 index 000000000..4cf5f2fd1 --- /dev/null +++ b/host/examples/tx_bursts.cpp @@ -0,0 +1,160 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> +#include <boost/format.hpp> +#include <csignal> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double seconds_in_future; + size_t total_num_samps; + double rate; + float ampl; + double freq; + double rep_rate; + double gain; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "delay before first burst") + ("repeat", "repeat burst") + ("rep-delay", po::value<double>(&rep_rate)->default_value(0.5), "delay between bursts") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to transmit") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of outgoing samples") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") + ("freq", po::value<double>(&freq)->default_value(0), "center frequency") + ("gain", po::value<double>(&gain)->default_value(0), "gain") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + bool repeat = vm.count("repeat") != 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the tx sample rate + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; + for(size_t i=0; i < usrp->get_tx_num_channels(); i++) usrp->set_tx_freq(freq, i); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting TX Gain: %f...") % (gain) << std::endl; + for(size_t i=0; i < usrp->get_tx_num_channels(); i++) usrp->set_tx_gain(gain, i); + std::cout << boost::format("Actual TX Gain: %f...") % (usrp->get_tx_gain()) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //create a transmit streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //allocate buffer with data to send + const size_t spb = tx_stream->get_max_num_samps(); + + std::vector<std::complex<float> > buff(spb, std::complex<float>(ampl, ampl)); + std::vector<std::complex<float> *> buffs(usrp->get_tx_num_channels(), &buff.front()); + + std::signal(SIGINT, &sig_int_handler); + if(repeat) std::cout << "Press Ctrl + C to quit..." << std::endl; + + double time_to_send = seconds_in_future; + + do { + //setup metadata for the first packet + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = false; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(time_to_send); + + //the first call to send() will block this many seconds before sending: + double timeout = std::max(rep_rate, seconds_in_future) + 0.1; //timeout (delay before transmit + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + size_t samps_to_send = std::min(total_num_samps - num_acc_samps, spb); + + //send a single packet + size_t num_tx_samps = tx_stream->send( + buffs, samps_to_send, md, timeout + ); + + //do not use time spec for subsequent packets + md.has_time_spec = false; + md.start_of_burst = false; + + if (num_tx_samps < samps_to_send) std::cerr << "Send timeout..." << std::endl; + if(verbose) std::cout << boost::format("Sent packet: %u samples") % num_tx_samps << std::endl; + + num_acc_samps += num_tx_samps; + } + + md.end_of_burst = true; + tx_stream->send(buffs, 0, md, timeout); + + time_to_send += rep_rate; + + std::cout << std::endl << "Waiting for async burst ACK... " << std::flush; + uhd::async_metadata_t async_md; + bool got_async_burst_ack = false; + //loop through all messages for the ACK packet (may have underflow messages in queue) + while (not got_async_burst_ack and usrp->get_device()->recv_async_msg(async_md, seconds_in_future)){ + got_async_burst_ack = (async_md.event_code == uhd::async_metadata_t::EVENT_CODE_BURST_ACK); + } + std::cout << (got_async_burst_ack? "success" : "fail") << std::endl; + } while (not stop_signal_called and repeat); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_samples_from_file.cpp b/host/examples/tx_samples_from_file.cpp new file mode 100644 index 000000000..c0812c007 --- /dev/null +++ b/host/examples/tx_samples_from_file.cpp @@ -0,0 +1,176 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <fstream> +#include <complex> + +namespace po = boost::program_options; + +template<typename samp_type> void send_from_file( + uhd::usrp::multi_usrp::sptr usrp, + const std::string &cpu_format, + const std::string &wire_format, + const std::string &file, + size_t samps_per_buff +){ + //create a transmit streamer + uhd::stream_args_t stream_args(cpu_format, wire_format); + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + uhd::tx_metadata_t md; + md.start_of_burst = false; + md.end_of_burst = false; + std::vector<samp_type> buff(samps_per_buff); + std::ifstream infile(file.c_str(), std::ifstream::binary); + + //loop until the entire file has been read + while(not md.end_of_burst){ + + infile.read((char*)&buff.front(), buff.size()*sizeof(samp_type)); + size_t num_tx_samps = infile.gcount()/sizeof(samp_type); + + md.end_of_burst = infile.eof(); + + tx_stream->send(&buff.front(), num_tx_samps, md); + } + + infile.close(); +} + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, file, type, ant, subdev, ref, wirefmt; + size_t spb; + double rate, freq, gain, bw; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "multi uhd device address args") + ("file", po::value<std::string>(&file)->default_value("usrp_samples.dat"), "name of the file to read binary samples from") + ("type", po::value<std::string>(&type)->default_value("short"), "sample type: double, float, or short") + ("spb", po::value<size_t>(&spb)->default_value(10000), "samples per buffer") + ("rate", po::value<double>(&rate), "rate of outgoing samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "waveform type (internal, external, mimo)") + ("wirefmt", po::value<std::string>(&wirefmt)->default_value("sc16"), "wire format (sc8 or sc16)") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX samples from file %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //Lock mboard clocks + usrp->set_clock_source(ref); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_tx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_tx_freq(freq); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq()/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting TX Gain: %f dB...") % gain << std::endl; + usrp->set_tx_gain(gain); + std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain() << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting TX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_tx_bandwidth(bw); + std::cout << boost::format("Actual TX Bandwidth: %f MHz...") % usrp->get_tx_bandwidth() << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_tx_antenna(ant); + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //Check Ref and LO Lock detect + std::vector<std::string> sensor_names; + sensor_names = usrp->get_tx_sensor_names(0); + if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) { + uhd::sensor_value_t lo_locked = usrp->get_tx_sensor("lo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking TX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + //send from file + if (type == "double") send_from_file<std::complex<double> >(usrp, "fc64", wirefmt, file, spb); + else if (type == "float") send_from_file<std::complex<float> >(usrp, "fc32", wirefmt, file, spb); + else if (type == "short") send_from_file<std::complex<short> >(usrp, "sc16", wirefmt, file, spb); + else throw std::runtime_error("Unknown type " + type); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_timed_samples.cpp b/host/examples/tx_timed_samples.cpp new file mode 100644 index 000000000..3b8cc75d4 --- /dev/null +++ b/host/examples/tx_timed_samples.cpp @@ -0,0 +1,128 @@ +// +// Copyright 2010-2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <boost/program_options.hpp> +#include <boost/thread/thread.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <complex> + +namespace po = boost::program_options; + +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args; + double seconds_in_future; + size_t total_num_samps; + double rate; + float ampl; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("secs", po::value<double>(&seconds_in_future)->default_value(1.5), "number of seconds in the future to transmit") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(10000), "total number of samples to transmit") + ("rate", po::value<double>(&rate)->default_value(100e6/16), "rate of outgoing samples") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of each sample") + ("dilv", "specify to disable inner-loop verbose") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Timed Samples %s") % desc << std::endl; + return ~0; + } + + bool verbose = vm.count("dilv") == 0; + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the tx sample rate + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //create a transmit streamer + uhd::stream_args_t stream_args("fc32"); //complex floats + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //allocate buffer with data to send + std::vector<std::complex<float> > buff(tx_stream->get_max_num_samps(), std::complex<float>(ampl, ampl)); + + //setup metadata for the first packet + uhd::tx_metadata_t md; + md.start_of_burst = false; + md.end_of_burst = false; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(seconds_in_future); + + //the first call to send() will block this many seconds before sending: + const double timeout = seconds_in_future + 0.1; //timeout (delay before transmit + padding) + + size_t num_acc_samps = 0; //number of accumulated samples + while(num_acc_samps < total_num_samps){ + size_t samps_to_send = std::min(total_num_samps - num_acc_samps, buff.size()); + + //send a single packet + size_t num_tx_samps = tx_stream->send( + &buff.front(), samps_to_send, md, timeout + ); + + //do not use time spec for subsequent packets + md.has_time_spec = false; + + if (num_tx_samps < samps_to_send) std::cerr << "Send timeout..." << std::endl; + if(verbose) std::cout << boost::format("Sent packet: %u samples") % num_tx_samps << std::endl; + + num_acc_samps += num_tx_samps; + } + + //send a mini EOB packet + md.end_of_burst = true; + tx_stream->send("", 0, md); + + std::cout << std::endl << "Waiting for async burst ACK... " << std::flush; + uhd::async_metadata_t async_md; + bool got_async_burst_ack = false; + //loop through all messages for the ACK packet (may have underflow messages in queue) + while (not got_async_burst_ack and usrp->get_device()->recv_async_msg(async_md, timeout)){ + got_async_burst_ack = (async_md.event_code == uhd::async_metadata_t::EVENT_CODE_BURST_ACK); + } + std::cout << (got_async_burst_ack? "success" : "fail") << std::endl; + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + + return 0; +} diff --git a/host/examples/tx_waveforms.cpp b/host/examples/tx_waveforms.cpp new file mode 100644 index 000000000..3c5eecd65 --- /dev/null +++ b/host/examples/tx_waveforms.cpp @@ -0,0 +1,264 @@ +// +// Copyright 2010-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/exception.hpp> +#include <boost/program_options.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <boost/thread.hpp> +#include <iostream> +#include <complex> +#include <csignal> +#include <cmath> + +namespace po = boost::program_options; + +/*********************************************************************** + * Signal handlers + **********************************************************************/ +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +/*********************************************************************** + * Waveform generators + **********************************************************************/ +static const size_t wave_table_len = 8192; + +class wave_table_class{ +public: + wave_table_class(const std::string &wave_type, const float ampl): + _wave_table(wave_table_len) + { + //compute real wave table with 1.0 amplitude + std::vector<double> real_wave_table(wave_table_len); + if (wave_type == "CONST"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = 1.0; + } + else if (wave_type == "SQUARE"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = (i < wave_table_len/2)? 0.0 : 1.0; + } + else if (wave_type == "RAMP"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = 2.0*i/(wave_table_len-1) - 1.0; + } + else if (wave_type == "SINE"){ + static const double tau = 2*std::acos(-1.0); + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = std::sin((tau*i)/wave_table_len); + } + else throw std::runtime_error("unknown waveform type: " + wave_type); + + //compute i and q pairs with 90% offset and scale to amplitude + for (size_t i = 0; i < wave_table_len; i++){ + const size_t q = (i+(3*wave_table_len)/4)%wave_table_len; + _wave_table[i] = std::complex<float>(ampl*real_wave_table[i], ampl*real_wave_table[q]); + } + } + + inline std::complex<float> operator()(const size_t index) const{ + return _wave_table[index % wave_table_len]; + } + +private: + std::vector<std::complex<float> > _wave_table; +}; + +/*********************************************************************** + * Main function + **********************************************************************/ +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //variables to be set by po + std::string args, wave_type, ant, subdev, ref, otw; + size_t spb; + double rate, freq, gain, wave_freq, bw; + float ampl; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("args", po::value<std::string>(&args)->default_value(""), "single uhd device address args") + ("spb", po::value<size_t>(&spb)->default_value(0), "samples per buffer, 0 for default") + ("rate", po::value<double>(&rate), "rate of outgoing samples") + ("freq", po::value<double>(&freq), "RF center frequency in Hz") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of the waveform [0 to 0.7]") + ("gain", po::value<double>(&gain), "gain for the RF chain") + ("ant", po::value<std::string>(&ant), "daughterboard antenna selection") + ("subdev", po::value<std::string>(&subdev), "daughterboard subdevice specification") + ("bw", po::value<double>(&bw), "daughterboard IF filter bandwidth in Hz") + ("wave-type", po::value<std::string>(&wave_type)->default_value("CONST"), "waveform type (CONST, SQUARE, RAMP, SINE)") + ("wave-freq", po::value<double>(&wave_freq)->default_value(0), "waveform frequency in Hz") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "clock reference (internal, external, mimo)") + ("otw", po::value<std::string>(&otw)->default_value("sc16"), "specify the over-the-wire sample mode") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TX Waveforms %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the usrp device with: %s...") % args << std::endl; + uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args); + + //Lock mboard clocks + usrp->set_clock_source(ref); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("subdev")) usrp->set_tx_subdev_spec(subdev); + + std::cout << boost::format("Using Device: %s") % usrp->get_pp_string() << std::endl; + + //set the sample rate + if (not vm.count("rate")){ + std::cerr << "Please specify the sample rate with --rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Rate: %f Msps...") % (rate/1e6) << std::endl; + usrp->set_tx_rate(rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //set the center frequency + if (not vm.count("freq")){ + std::cerr << "Please specify the center frequency with --freq" << std::endl; + return ~0; + } + + for(size_t chan = 0; chan < usrp->get_tx_num_channels(); chan++) { + std::cout << boost::format("Setting TX Freq: %f MHz...") % (freq/1e6) << std::endl; + usrp->set_tx_freq(freq, chan); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (usrp->get_tx_freq(chan)/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("gain")){ + std::cout << boost::format("Setting TX Gain: %f dB...") % gain << std::endl; + usrp->set_tx_gain(gain, chan); + std::cout << boost::format("Actual TX Gain: %f dB...") % usrp->get_tx_gain(chan) << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("bw")){ + std::cout << boost::format("Setting TX Bandwidth: %f MHz...") % bw << std::endl; + usrp->set_tx_bandwidth(bw, chan); + std::cout << boost::format("Actual TX Bandwidth: %f MHz...") % usrp->get_tx_bandwidth(chan) << std::endl << std::endl; + } + + //set the antenna + if (vm.count("ant")) usrp->set_tx_antenna(ant, chan); + } + + boost::this_thread::sleep(boost::posix_time::seconds(1)); //allow for some setup time + + //for the const wave, set the wave freq for small samples per period + if (wave_freq == 0 and wave_type == "CONST"){ + wave_freq = usrp->get_tx_rate()/2; + } + + //error when the waveform is not possible to generate + if (std::abs(wave_freq) > usrp->get_tx_rate()/2){ + throw std::runtime_error("wave freq out of Nyquist zone"); + } + if (usrp->get_tx_rate()/std::abs(wave_freq) > wave_table_len/2){ + throw std::runtime_error("wave freq too small for table"); + } + + //pre-compute the waveform values + const wave_table_class wave_table(wave_type, ampl); + const size_t step = boost::math::iround(wave_freq/usrp->get_tx_rate() * wave_table_len); + size_t index = 0; + + //create a transmit streamer + //linearly map channels (index0 = channel0, index1 = channel1, ...) + uhd::stream_args_t stream_args("fc32", otw); + for (size_t chan = 0; chan < usrp->get_tx_num_channels(); chan++) + stream_args.channels.push_back(chan); //linear mapping + uhd::tx_streamer::sptr tx_stream = usrp->get_tx_stream(stream_args); + + //allocate a buffer which we re-use for each channel + if (spb == 0) spb = tx_stream->get_max_num_samps()*10; + std::vector<std::complex<float> > buff(spb); + std::vector<std::complex<float> *> buffs(usrp->get_tx_num_channels(), &buff.front()); + + //setup the metadata flags + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = false; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(0.1); + + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + usrp->set_time_now(uhd::time_spec_t(0.0)); + + //Check Ref and LO Lock detect + std::vector<std::string> sensor_names; + sensor_names = usrp->get_tx_sensor_names(0); + if (std::find(sensor_names.begin(), sensor_names.end(), "lo_locked") != sensor_names.end()) { + uhd::sensor_value_t lo_locked = usrp->get_tx_sensor("lo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + sensor_names = usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(sensor_names.begin(), sensor_names.end(), "mimo_locked") != sensor_names.end())) { + uhd::sensor_value_t mimo_locked = usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end())) { + uhd::sensor_value_t ref_locked = usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking TX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + + //send data until the signal handler gets called + while(not stop_signal_called){ + //fill the buffer with the waveform + for (size_t n = 0; n < buff.size(); n++){ + buff[n] = wave_table(index += step); + } + + //send the entire contents of the buffer + tx_stream->send(buffs, buff.size(), md); + + md.start_of_burst = false; + md.has_time_spec = false; + } + + //send a mini EOB packet + md.end_of_burst = true; + tx_stream->send("", 0, md); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + return 0; +} diff --git a/host/examples/txrx_loopback_to_file.cpp b/host/examples/txrx_loopback_to_file.cpp new file mode 100644 index 000000000..495c9f7e4 --- /dev/null +++ b/host/examples/txrx_loopback_to_file.cpp @@ -0,0 +1,447 @@ +// +// Copyright 2010-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +#include <uhd/utils/thread_priority.hpp> +#include <uhd/utils/safe_main.hpp> +#include <uhd/utils/static.hpp> +#include <uhd/usrp/multi_usrp.hpp> +#include <uhd/exception.hpp> +#include <boost/thread/thread.hpp> +#include <boost/program_options.hpp> +#include <boost/math/special_functions/round.hpp> +#include <boost/foreach.hpp> +#include <boost/format.hpp> +#include <iostream> +#include <fstream> +#include <complex> +#include <csignal> +#include <cmath> + +namespace po = boost::program_options; + +/*********************************************************************** + * Signal handlers + **********************************************************************/ +static bool stop_signal_called = false; +void sig_int_handler(int){stop_signal_called = true;} + +/*********************************************************************** + * Waveform generators + **********************************************************************/ +static const size_t wave_table_len = 8192; + +class wave_table_class{ +public: + wave_table_class(const std::string &wave_type, const float ampl): + _wave_table(wave_table_len) + { + //compute real wave table with 1.0 amplitude + std::vector<double> real_wave_table(wave_table_len); + if (wave_type == "CONST"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = 1.0; + } + else if (wave_type == "SQUARE"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = (i < wave_table_len/2)? 0.0 : 1.0; + } + else if (wave_type == "RAMP"){ + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = 2.0*i/(wave_table_len-1) - 1.0; + } + else if (wave_type == "SINE"){ + static const double tau = 2*std::acos(-1.0); + for (size_t i = 0; i < wave_table_len; i++) + real_wave_table[i] = std::sin((tau*i)/wave_table_len); + } + else throw std::runtime_error("unknown waveform type: " + wave_type); + + //compute i and q pairs with 90% offset and scale to amplitude + for (size_t i = 0; i < wave_table_len; i++){ + const size_t q = (i+(3*wave_table_len)/4)%wave_table_len; + _wave_table[i] = std::complex<float>(ampl*real_wave_table[i], ampl*real_wave_table[q]); + } + } + + inline std::complex<float> operator()(const size_t index) const{ + return _wave_table[index % wave_table_len]; + } + +private: + std::vector<std::complex<float> > _wave_table; +}; + +/*********************************************************************** + * transmit_worker function + * A function to be used as a boost::thread_group thread for transmitting + **********************************************************************/ +void transmit_worker( + std::vector<std::complex<float> > buff, + wave_table_class wave_table, + uhd::tx_streamer::sptr tx_streamer, + uhd::tx_metadata_t metadata, + size_t step, + size_t index, + int num_channels +){ + std::vector<std::complex<float> *> buffs(num_channels, &buff.front()); + + //send data until the signal handler gets called + while(not stop_signal_called){ + //fill the buffer with the waveform + for (size_t n = 0; n < buff.size(); n++){ + buff[n] = wave_table(index += step); + } + + //send the entire contents of the buffer + tx_streamer->send(buffs, buff.size(), metadata); + + metadata.start_of_burst = false; + metadata.has_time_spec = false; + } + + //send a mini EOB packet + metadata.end_of_burst = true; + tx_streamer->send("", 0, metadata); +} + + +/*********************************************************************** + * recv_to_file function + **********************************************************************/ +template<typename samp_type> void recv_to_file( + uhd::usrp::multi_usrp::sptr usrp, + const std::string &cpu_format, + const std::string &wire_format, + const std::string &file, + size_t samps_per_buff, + int num_requested_samples, + float settling_time +){ + int num_total_samps = 0; + //create a receive streamer + uhd::stream_args_t stream_args(cpu_format,wire_format); + uhd::rx_streamer::sptr rx_stream = usrp->get_rx_stream(stream_args); + + uhd::rx_metadata_t md; + std::vector<samp_type> buff(samps_per_buff); + std::ofstream outfile(file.c_str(), std::ofstream::binary); + bool overflow_message = true; + float timeout = settling_time + 0.1; //expected settling time + padding for first recv + + //setup streaming + uhd::stream_cmd_t stream_cmd((num_requested_samples == 0)? + uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS: + uhd::stream_cmd_t::STREAM_MODE_NUM_SAMPS_AND_DONE + ); + stream_cmd.num_samps = num_requested_samples; + stream_cmd.stream_now = false; + stream_cmd.time_spec = uhd::time_spec_t(settling_time); + usrp->issue_stream_cmd(stream_cmd); + + while(not stop_signal_called and (num_requested_samples != num_total_samps or num_requested_samples == 0)){ + size_t num_rx_samps = rx_stream->recv(&buff.front(), buff.size(), md, timeout); + timeout = 0.1; //small timeout for subsequent recv + + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_TIMEOUT) { + std::cout << boost::format("Timeout while streaming") << std::endl; + break; + } + if (md.error_code == uhd::rx_metadata_t::ERROR_CODE_OVERFLOW){ + if (overflow_message){ + overflow_message = false; + std::cerr << boost::format( + "Got an overflow indication. Please consider the following:\n" + " Your write medium must sustain a rate of %fMB/s.\n" + " Dropped samples will not be written to the file.\n" + " Please modify this example for your purposes.\n" + " This message will not appear again.\n" + ) % (usrp->get_rx_rate()*sizeof(samp_type)/1e6); + } + continue; + } + if (md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE){ + throw std::runtime_error(str(boost::format( + "Unexpected error code 0x%x" + ) % md.error_code)); + } + + num_total_samps += num_rx_samps; + + outfile.write((const char*)&buff.front(), num_rx_samps*sizeof(samp_type)); + } + + outfile.close(); +} + + +/*********************************************************************** + * Main function + **********************************************************************/ +int UHD_SAFE_MAIN(int argc, char *argv[]){ + uhd::set_thread_priority_safe(); + + //transmit variables to be set by po + std::string tx_args, wave_type, tx_ant, tx_subdev, ref, otw; + double tx_rate, tx_freq, tx_gain, wave_freq, tx_bw; + float ampl; + + //receive variables to be set by po + std::string rx_args, file, type, rx_ant, rx_subdev; + size_t total_num_samps, spb; + double rx_rate, rx_freq, rx_gain, rx_bw; + float settling; + + //setup the program options + po::options_description desc("Allowed options"); + desc.add_options() + ("help", "help message") + ("tx-args", po::value<std::string>(&tx_args)->default_value(""), "uhd transmit device address args") + ("rx-args", po::value<std::string>(&rx_args)->default_value(""), "uhd receive device address args") + ("file", po::value<std::string>(&file)->default_value("usrp_samples.dat"), "name of the file to write binary samples to") + ("type", po::value<std::string>(&type)->default_value("short"), "sample type in file: double, float, or short") + ("nsamps", po::value<size_t>(&total_num_samps)->default_value(0), "total number of samples to receive") + ("settling", po::value<float>(&settling)->default_value(float(0.2)), "settling time (seconds) before receiving") + ("spb", po::value<size_t>(&spb)->default_value(0), "samples per buffer, 0 for default") + ("tx-rate", po::value<double>(&tx_rate), "rate of transmit outgoing samples") + ("rx-rate", po::value<double>(&rx_rate), "rate of receive incoming samples") + ("tx-freq", po::value<double>(&tx_freq), "transmit RF center frequency in Hz") + ("rx-freq", po::value<double>(&rx_freq), "receive RF center frequency in Hz") + ("ampl", po::value<float>(&l)->default_value(float(0.3)), "amplitude of the waveform [0 to 0.7]") + ("tx-gain", po::value<double>(&tx_gain), "gain for the transmit RF chain") + ("rx-gain", po::value<double>(&rx_gain), "gain for the receive RF chain") + ("tx-ant", po::value<std::string>(&tx_ant), "daughterboard transmit antenna selection") + ("rx-ant", po::value<std::string>(&rx_ant), "daughterboard receive antenna selection") + ("tx-subdev", po::value<std::string>(&tx_subdev), "daughterboard transmit subdevice specification") + ("rx-subdev", po::value<std::string>(&rx_subdev), "daughterboard receive subdevice specification") + ("tx-bw", po::value<double>(&tx_bw), "daughterboard transmit IF filter bandwidth in Hz") + ("rx-bw", po::value<double>(&rx_bw), "daughterboard receive IF filter bandwidth in Hz") + ("wave-type", po::value<std::string>(&wave_type)->default_value("CONST"), "waveform type (CONST, SQUARE, RAMP, SINE)") + ("wave-freq", po::value<double>(&wave_freq)->default_value(0), "waveform frequency in Hz") + ("ref", po::value<std::string>(&ref)->default_value("internal"), "clock reference (internal, external, mimo)") + ("otw", po::value<std::string>(&otw)->default_value("sc16"), "specify the over-the-wire sample mode") + ; + po::variables_map vm; + po::store(po::parse_command_line(argc, argv, desc), vm); + po::notify(vm); + + //print the help message + if (vm.count("help")){ + std::cout << boost::format("UHD TXRX Loopback to File %s") % desc << std::endl; + return ~0; + } + + //create a usrp device + std::cout << std::endl; + std::cout << boost::format("Creating the transmit usrp device with: %s...") % tx_args << std::endl; + uhd::usrp::multi_usrp::sptr tx_usrp = uhd::usrp::multi_usrp::make(tx_args); + std::cout << std::endl; + std::cout << boost::format("Creating the receive usrp device with: %s...") % rx_args << std::endl; + uhd::usrp::multi_usrp::sptr rx_usrp = uhd::usrp::multi_usrp::make(rx_args); + + //Lock mboard clocks + tx_usrp->set_clock_source(ref); + rx_usrp->set_clock_source(ref); + + //always select the subdevice first, the channel mapping affects the other settings + if (vm.count("tx-subdev")) tx_usrp->set_tx_subdev_spec(tx_subdev); + if (vm.count("rx-subdev")) rx_usrp->set_rx_subdev_spec(rx_subdev); + + std::cout << boost::format("Using Device: %s") % tx_usrp->get_pp_string() << std::endl; + std::cout << boost::format("Using Device: %s") % rx_usrp->get_pp_string() << std::endl; + + //set the transmit sample rate + if (not vm.count("tx-rate")){ + std::cerr << "Please specify the transmit sample rate with --tx-rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting TX Rate: %f Msps...") % (tx_rate/1e6) << std::endl; + tx_usrp->set_tx_rate(tx_rate); + std::cout << boost::format("Actual TX Rate: %f Msps...") % (tx_usrp->get_tx_rate()/1e6) << std::endl << std::endl; + + //set the receive sample rate + if (not vm.count("rx-rate")){ + std::cerr << "Please specify the sample rate with --rx-rate" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Rate: %f Msps...") % (rx_rate/1e6) << std::endl; + rx_usrp->set_rx_rate(rx_rate); + std::cout << boost::format("Actual RX Rate: %f Msps...") % (rx_usrp->get_rx_rate()/1e6) << std::endl << std::endl; + + //set the transmit center frequency + if (not vm.count("tx-freq")){ + std::cerr << "Please specify the transmit center frequency with --tx-freq" << std::endl; + return ~0; + } + + for(size_t chan = 0; chan < tx_usrp->get_tx_num_channels(); chan++) { + std::cout << boost::format("Setting TX Freq: %f MHz...") % (tx_freq/1e6) << std::endl; + tx_usrp->set_tx_freq(tx_freq, chan); + std::cout << boost::format("Actual TX Freq: %f MHz...") % (tx_usrp->get_tx_freq(chan)/1e6) << std::endl << std::endl; + + //set the rf gain + if (vm.count("tx-gain")){ + std::cout << boost::format("Setting TX Gain: %f dB...") % tx_gain << std::endl; + tx_usrp->set_tx_gain(tx_gain, chan); + std::cout << boost::format("Actual TX Gain: %f dB...") % tx_usrp->get_tx_gain(chan) << std::endl << std::endl; + } + + //set the IF filter bandwidth + if (vm.count("tx-bw")){ + std::cout << boost::format("Setting TX Bandwidth: %f MHz...") % tx_bw << std::endl; + tx_usrp->set_tx_bandwidth(tx_bw, chan); + std::cout << boost::format("Actual TX Bandwidth: %f MHz...") % tx_usrp->get_tx_bandwidth(chan) << std::endl << std::endl; + } + + //set the antenna + if (vm.count("tx-ant")) tx_usrp->set_tx_antenna(tx_ant, chan); + } + + //set the receive center frequency + if (not vm.count("rx-freq")){ + std::cerr << "Please specify the center frequency with --rx-freq" << std::endl; + return ~0; + } + std::cout << boost::format("Setting RX Freq: %f MHz...") % (rx_freq/1e6) << std::endl; + rx_usrp->set_rx_freq(rx_freq); + std::cout << boost::format("Actual RX Freq: %f MHz...") % (rx_usrp->get_rx_freq()/1e6) << std::endl << std::endl; + + //set the receive rf gain + if (vm.count("rx_gain")){ + std::cout << boost::format("Setting RX Gain: %f dB...") % rx_gain << std::endl; + rx_usrp->set_rx_gain(rx_gain); + std::cout << boost::format("Actual RX Gain: %f dB...") % rx_usrp->get_rx_gain() << std::endl << std::endl; + } + + //set the receive IF filter bandwidth + if (vm.count("rx_bw")){ + std::cout << boost::format("Setting RX Bandwidth: %f MHz...") % rx_bw << std::endl; + rx_usrp->set_rx_bandwidth(rx_bw); + std::cout << boost::format("Actual RX Bandwidth: %f MHz...") % rx_usrp->get_rx_bandwidth() << std::endl << std::endl; + } + + //set the receive antenna + if (vm.count("ant")) rx_usrp->set_rx_antenna(rx_ant); + + //for the const wave, set the wave freq for small samples per period + if (wave_freq == 0 and wave_type == "CONST"){ + wave_freq = tx_usrp->get_tx_rate()/2; + } + + //error when the waveform is not possible to generate + if (std::abs(wave_freq) > tx_usrp->get_tx_rate()/2){ + throw std::runtime_error("wave freq out of Nyquist zone"); + } + if (tx_usrp->get_tx_rate()/std::abs(wave_freq) > wave_table_len/2){ + throw std::runtime_error("wave freq too small for table"); + } + + //pre-compute the waveform values + const wave_table_class wave_table(wave_type, ampl); + const size_t step = boost::math::iround(wave_freq/tx_usrp->get_tx_rate() * wave_table_len); + size_t index = 0; + + //create a transmit streamer + //linearly map channels (index0 = channel0, index1 = channel1, ...) + uhd::stream_args_t stream_args("fc32", otw); + for (size_t chan = 0; chan < tx_usrp->get_tx_num_channels(); chan++) + stream_args.channels.push_back(chan); //linear mapping + uhd::tx_streamer::sptr tx_stream = tx_usrp->get_tx_stream(stream_args); + + //allocate a buffer which we re-use for each channel + if (spb == 0) spb = tx_stream->get_max_num_samps()*10; + std::vector<std::complex<float> > buff(spb); + int num_channels = tx_usrp->get_tx_num_channels(); + + //setup the metadata flags + uhd::tx_metadata_t md; + md.start_of_burst = true; + md.end_of_burst = false; + md.has_time_spec = true; + md.time_spec = uhd::time_spec_t(0.1); //give us 0.1 seconds to fill the tx buffers + + //Check Ref and LO Lock detect + std::vector<std::string> tx_sensor_names, rx_sensor_names; + tx_sensor_names = tx_usrp->get_tx_sensor_names(0); + if (std::find(tx_sensor_names.begin(), tx_sensor_names.end(), "lo_locked") != tx_sensor_names.end()) { + uhd::sensor_value_t lo_locked = tx_usrp->get_tx_sensor("lo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + rx_sensor_names = rx_usrp->get_rx_sensor_names(0); + if (std::find(rx_sensor_names.begin(), rx_sensor_names.end(), "lo_locked") != rx_sensor_names.end()) { + uhd::sensor_value_t lo_locked = rx_usrp->get_rx_sensor("lo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % lo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(lo_locked.to_bool()); + } + + tx_sensor_names = tx_usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(tx_sensor_names.begin(), tx_sensor_names.end(), "mimo_locked") != tx_sensor_names.end())) { + uhd::sensor_value_t mimo_locked = tx_usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking TX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(tx_sensor_names.begin(), tx_sensor_names.end(), "ref_locked") != tx_sensor_names.end())) { + uhd::sensor_value_t ref_locked = tx_usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking TX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + rx_sensor_names = rx_usrp->get_mboard_sensor_names(0); + if ((ref == "mimo") and (std::find(rx_sensor_names.begin(), rx_sensor_names.end(), "mimo_locked") != rx_sensor_names.end())) { + uhd::sensor_value_t mimo_locked = rx_usrp->get_mboard_sensor("mimo_locked",0); + std::cout << boost::format("Checking RX: %s ...") % mimo_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(mimo_locked.to_bool()); + } + if ((ref == "external") and (std::find(rx_sensor_names.begin(), rx_sensor_names.end(), "ref_locked") != rx_sensor_names.end())) { + uhd::sensor_value_t ref_locked = rx_usrp->get_mboard_sensor("ref_locked",0); + std::cout << boost::format("Checking RX: %s ...") % ref_locked.to_pp_string() << std::endl; + UHD_ASSERT_THROW(ref_locked.to_bool()); + } + + if (total_num_samps == 0){ + std::signal(SIGINT, &sig_int_handler); + std::cout << "Press Ctrl + C to stop streaming..." << std::endl; + } + + //reset usrp time to prepare for transmit/receive + std::cout << boost::format("Setting device timestamp to 0...") << std::endl; + tx_usrp->set_time_now(uhd::time_spec_t(0.0)); + + //start transmit worker thread + boost::thread_group transmit_thread; + transmit_thread.create_thread(boost::bind(&transmit_worker, buff, wave_table, tx_stream, md, step, index, num_channels)); + + //recv to file + if (type == "double") recv_to_file<std::complex<double> >(rx_usrp, "fc64", otw, file, spb, total_num_samps, settling); + else if (type == "float") recv_to_file<std::complex<float> >(rx_usrp, "fc32", otw, file, spb, total_num_samps, settling); + else if (type == "short") recv_to_file<std::complex<short> >(rx_usrp, "sc16", otw, file, spb, total_num_samps, settling); + else { + //clean up transmit worker + stop_signal_called = true; + transmit_thread.join_all(); + throw std::runtime_error("Unknown type " + type); + } + + //clean up transmit worker + stop_signal_called = true; + transmit_thread.join_all(); + + //finished + std::cout << std::endl << "Done!" << std::endl << std::endl; + return 0; +} |