aboutsummaryrefslogtreecommitdiffstats
path: root/host/examples/gpio.cpp
diff options
context:
space:
mode:
Diffstat (limited to 'host/examples/gpio.cpp')
-rw-r--r--host/examples/gpio.cpp46
1 files changed, 32 insertions, 14 deletions
diff --git a/host/examples/gpio.cpp b/host/examples/gpio.cpp
index 01648c187..5ee504de1 100644
--- a/host/examples/gpio.cpp
+++ b/host/examples/gpio.cpp
@@ -120,7 +120,8 @@ std::string to_bit_string(uint32_t val, const size_t num_bits)
void output_reg_values(const std::string& bank,
const std::string& port,
const uhd::usrp::multi_usrp::sptr& usrp,
- const size_t num_bits)
+ const size_t num_bits,
+ const bool has_src_api)
{
const std::vector<std::string> attrs = {
"CTRL", "DDR", "ATR_0X", "ATR_RX", "ATR_TX", "ATR_XX", "OUT", "READBACK"};
@@ -135,6 +136,10 @@ void output_reg_values(const std::string& bank,
<< std::endl;
}
+ if (!has_src_api) {
+ return;
+ }
+
// GPIO Src - get_gpio_src() not supported for all devices
try {
const auto gpio_src = usrp->get_gpio_src(port);
@@ -186,7 +191,8 @@ void run_bitbang_test(uhd::usrp::multi_usrp::sptr usrp,
const uint32_t mask,
const uint32_t num_bits,
const std::chrono::milliseconds dwell_time,
- const bool repeat)
+ const bool repeat,
+ const bool has_src_api)
{
// Set all pins to "GPIO", and DDR/OUT to whatever the user requested
usrp->set_gpio_attr(gpio_bank, "CTRL", 0, mask);
@@ -195,7 +201,7 @@ void run_bitbang_test(uhd::usrp::multi_usrp::sptr usrp,
// print out initial state of GPIO
std::cout << "\nConfigured GPIO values:" << std::endl;
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
std::cout << std::endl;
std::signal(SIGINT, &sig_int_handler);
@@ -379,7 +385,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
("bits", po::value<size_t>(&num_bits)->default_value(GPIO_DEFAULT_NUM_BITS), "number of bits in gpio bank")
("bitbang", "single test case where user sets values for CTRL, DDR, and OUT registers")
("check_loopback", "check that lower half of pins is looped back onto upper half")
- ("src", po::value<std::string>(&src_str), "GPIO SRC reg value")
+ ("src", po::value<std::string>(&src_str), "GPIO source value (not available on all USRPs)")
("ddr", po::value<std::string>(&ddr_str)->default_value(GPIO_DEFAULT_DDR), "GPIO DDR reg value")
("out", po::value<std::string>(&out_str)->default_value(GPIO_DEFAULT_OUT), "GPIO OUT reg value")
;
@@ -418,14 +424,21 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
std::cout << "Creating the usrp device with: " << args << "..." << std::endl;
auto usrp = uhd::usrp::multi_usrp::make(args);
std::cout << "Using Device: " << usrp->get_pp_string() << std::endl;
+ bool has_src_api = true;
// Handle if the port is unspecified
if (port.empty()) {
- port = usrp->get_gpio_src_banks(0).front();
+ try {
+ port = usrp->get_gpio_src_banks(0).front();
+ } catch (const uhd::not_implemented_error&) {
+ has_src_api = false;
+ }
}
if (gpio_bank.empty()) {
gpio_bank = usrp->get_gpio_banks(0).front();
}
- std::cout << "Using GPIO connector: " << port << std::endl;
+ if (has_src_api) {
+ std::cout << "Using GPIO connector: " << port << std::endl;
+ }
if (vm.count("list_banks")) {
std::cout << "Available GPIO banks: " << std::endl;
@@ -450,12 +463,16 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
typedef boost::char_separator<char> separator;
boost::tokenizer<separator> tokens(src_str, separator(" "));
std::copy(tokens.begin(), tokens.end(), std::back_inserter(gpio_src));
+ // If someone provides --src, this will throw an exception
+ // on devices that don't have the source API. That's OK, because we
+ // have no way of honoring the caller's request, and the exception
+ // thrown is a good way to communicate that back to the call site.
usrp->set_gpio_src(port, gpio_src);
}
// print out initial unconfigured state of GPIO
std::cout << "Initial GPIO values:" << std::endl;
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
// configure GPIO registers
uint32_t ddr = strtoul(ddr_str.c_str(), NULL, 0);
@@ -477,7 +494,8 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
mask,
num_bits,
dwell_time,
- bool(vm.count("repeat")));
+ bool(vm.count("repeat")),
+ has_src_api);
return EXIT_SUCCESS;
}
@@ -522,7 +540,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
// print out initial state of FP GPIO
std::cout << "\nConfigured GPIO values:" << std::endl;
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
std::cout << std::endl;
// set up streams
@@ -544,7 +562,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
failures += int(!check_rb_values(usrp->get_gpio_attr(gpio_bank, "DDR") & mask,
ddr | GPIO_BIT(num_bits - 1),
num_bits, 0));
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
// restore DDR value
usrp->set_gpio_attr(gpio_bank, "DDR", ddr, mask);
@@ -566,7 +584,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
failures += int(!check_rb_values(usrp->get_gpio_attr(gpio_bank, "READBACK"),
GPIO_BIT(4) | GPIO_BIT(0),
num_bits, loopback_num_bits));
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
usrp->set_gpio_attr(gpio_bank, "OUT", 0, GPIO_BIT(4));
if (stop_signal_called)
break;
@@ -579,7 +597,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
failures += int(!check_rb_values(usrp->get_gpio_attr(gpio_bank, "READBACK"),
GPIO_BIT(1),
num_bits, loopback_num_bits));
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
stream_helper.stop_stream(false, true);
}
if (stop_signal_called)
@@ -593,7 +611,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
failures += int(!check_rb_values(usrp->get_gpio_attr(gpio_bank, "READBACK"),
GPIO_BIT(2),
num_bits, loopback_num_bits));
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
stream_helper.stop_stream(true, false);
}
if (stop_signal_called)
@@ -608,7 +626,7 @@ int UHD_SAFE_MAIN(int argc, char* argv[])
GPIO_BIT(3),
num_bits, loopback_num_bits));
stream_helper.stop_stream(true, true);
- output_reg_values(gpio_bank, port, usrp, num_bits);
+ output_reg_values(gpio_bank, port, usrp, num_bits, has_src_api);
}
std::cout << std::endl;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 04:51:40 +0000