diff options
Diffstat (limited to 'host/docs')
| -rw-r--r-- | host/docs/transport.rst | 11 | ||||
| -rw-r--r-- | host/docs/usrp_nxxx.rst | 15 |
2 files changed, 18 insertions, 8 deletions
diff --git a/host/docs/transport.rst b/host/docs/transport.rst index 432db4bb5..2f730f8e4 100644 --- a/host/docs/transport.rst +++ b/host/docs/transport.rst @@ -40,6 +40,17 @@ The following parameters can be used to alter the transport's default behavior: as the asynchronous send implementation is currently disabled. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Flow control parameters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The host-based flow control expects periodic update packets from the device. +These update packets inform the host of the last packet consumed by the device, +which allows the host to determine throttling conditions for the transmission of packets. +The following mechanisms affect the transmission of periodic update packets: + +* **ups_per_fifo:** The number of update packets for each FIFO's worth of bytes sent into the device +* **ups_per_sec:** The number of update packets per second + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Resize socket buffers ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It may be useful increase the size of the socket buffers to diff --git a/host/docs/usrp_nxxx.rst b/host/docs/usrp_nxxx.rst index 617555b56..1c270df08 100644 --- a/host/docs/usrp_nxxx.rst +++ b/host/docs/usrp_nxxx.rst @@ -81,12 +81,10 @@ The reset button is a pushbutton switch (S2) located inside the enclosure. ------------------------------------------------------------------------ Setup networking ------------------------------------------------------------------------ -The USRP2 only supports gigabit ethernet, and -will not work with a 10/100 Mbps interface. -Because the USRP2 uses gigabit ethernet pause frames for flow control, -you cannot use multiple USRP2s with a switch or a hub. -It is recommended that each USRP2 be plugged directly into its own -dedicated gigabit ethernet interface on the host computer. +The USRP2 only supports gigabit ethernet, +and will not work with a 10/100 Mbps interface. +However, a 10/100 Mbps interface can be connected indirectly +to a USRP2 through a gigabit ethernet switch. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Setup the host interface @@ -105,8 +103,9 @@ It is recommended that you change or disable your firewall settings. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Multiple device configuration ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -As described above, you will need one ethernet interface per USRP2. -Each ethernet interface should have its own subnet, +For maximum throughput, one ethernet interface per USRP2 is recommended, +although multiple devices may be connected via a gigabit ethernet switch. +In any case, each ethernet interface should have its own subnet, and the corresponding USRP2 device should be assigned an address in that subnet. Example: |