diff options
Diffstat (limited to 'host/docs')
| -rw-r--r-- | host/docs/build.rst | 2 | ||||
| -rw-r--r-- | host/docs/dboards.rst | 29 |
2 files changed, 21 insertions, 10 deletions
diff --git a/host/docs/build.rst b/host/docs/build.rst index 9cf37db4a..a41ce8331 100644 --- a/host/docs/build.rst +++ b/host/docs/build.rst @@ -47,7 +47,7 @@ CMake Boost ^^^^^^^^^^^^^^^^ * **Purpose:** C++ library -* **Version:** at least 3.6 unix, at least 4.0 windows +* **Version:** at least 1.36 unix, at least 1.40 windows * **Usage:** build time + run time (required) * **Download URL:** http://www.boost.org/users/download/ * **Download URL (windows installer):** http://www.boostpro.com/download diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index 4ad724c82..080117651 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -49,10 +49,12 @@ Receive Antennas: **J3** The board has no user selectable antenna setting -Recieve Gains: +Receive Gains: **GC1**, Range: 0-56dB **GC2**, Range: 0-24dB +Low-Pass Filter Bandwidth (Hz): 4M-33M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ RFX Series ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -64,26 +66,25 @@ The user may set the receive antenna to be TX/RX or RX2. However, when using an RFX board in full-duplex mode, the receive antenna will always be set to RX2, regardless of the settings. -Recieve Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) +Receive Gains: **PGA0**, Range: 0-70dB (except RFX400 range is 0-45dB) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ XCVR 2450 ^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The XCVR2450 has a non-contiguous tuning range consisting of a high band and a low band. -The high band consists of frequencies between...TODO +The XCVR2450 has a non-contiguous tuning range consisting of a +high band (4.9-6.0GHz) and a low band (2.4-2.5GHz). Transmit Antennas: **J1** or **J2** Receive Antennas: **J1** or **J2** -When using the XCVR2450 in full-duplex mode, -the user must set the receive antenna and the transmit antenna to be different; -not doing so will yeild undefined results. - The XCVR2450 uses a common LO for both receive and transmit. Even though the API allows the RX and TX LOs to be individually set, a change of one LO setting will be reflected in the other LO setting. +The XCVR2450 does not support full-duplex mode, attempting to operate +in full-duplex will result in transmit-only operation. + Transmit Gains: * **VGA**, Range: 0-30dB * **BB**, Range: 0-5dB @@ -92,6 +93,10 @@ Receive Gains: * **LNA**, Range: 0-30.5dB * **VGA**, Range: 0-62dB +Low-Pass Filter Bandwidths (Hz): + * **RX**: 7.5M, 9.5M, 14M, 18M; (each +-0, 5, or 10%) + * **TX**: 12M, 18M, 24M + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ WBX Series ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -105,7 +110,11 @@ the receive antenna will always be set to RX2, regardless of the settings. Transmit Gains: **PGA0**, Range: 0-25dB -Recieve Gains: **PGA0**, Range: 0-31.5dB +Receive Gains: **PGA0**, Range: 0-31.5dB + +Low-Pass Filter Bandwidths (Hz): + * **RX**: 20M (Fixed) + * **TX**: 20M (Fixed) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ TVRX @@ -116,6 +125,8 @@ Receive Gains: * **RF**, Range: -13.3-50.3dB (frequency-dependent) * **IF**, Range: -1.5-32.5dB +Bandpass Filter Bandwidth: 6MHz + ------------------------------------------------------------------------ Daughterboard Modifications ------------------------------------------------------------------------ |