diff options
Diffstat (limited to 'host/docs')
| -rw-r--r-- | host/docs/dboards.dox | 4 | ||||
| -rw-r--r-- | host/docs/usrp_e3x0.dox | 8 |
2 files changed, 8 insertions, 4 deletions
diff --git a/host/docs/dboards.dox b/host/docs/dboards.dox index 13f3ccadd..b38fa5ae1 100644 --- a/host/docs/dboards.dox +++ b/host/docs/dboards.dox @@ -331,6 +331,10 @@ Sensors: - **rssi**: float for measured RSSI in dBm - **temperature**: float for measured temperature in degC +\subsection dboards_e300 E310 MIMO XCVR board + +Please refer to \ref e3x0_dboard_e310. + \subsection dboards_dbsrxmod DBSRX - Modifying for other boards that USRP1 Due to different clocking capabilities, the DBSRX will require diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index 289ea3410..dd26e047e 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -132,7 +132,7 @@ which should return 'arm-oe-linux-gnueabi'. -# Setup your environment as described in \ref e3x0_sdk_usage -# Type the following in the build directory (assuming a build in host/build): - $ cmake -DCMAKE_TOOLCHAIN_FILE=<youruhdsrc>/host/cmake/Toolchains/oe-sdk_cross.cmake -DENABLE_E300 .. + $ cmake -DCMAKE_TOOLCHAIN_FILE=<youruhdsrc>/host/cmake/Toolchains/oe-sdk_cross.cmake -DENABLE_E300=On .. $ make \subsubsection e3x0_sdk_usage_gnuradio Building GNU Radio @@ -191,7 +191,7 @@ builds) $ bitbake gnuradio-dev-image \endcode -When this completes, the files needed to create the sd card are in +When this completes, the files needed to create the SD card are in `tmp-glibc/deploy/images/ettus-e300` -# Build the toolchain. @@ -395,7 +395,7 @@ usrp->set_rx_subdev_spec("A:A A:B"); The following sensors are available for the USRP-E Series motherboards; they can be queried through the API. -- **fe_locked** - rx / tx frontend pll locked +- **fe_locked** - rx / tx frontend PLL locked - **temp** - processor temperature value - **gps_time** and **gps_locked** sensors are added when the GPSDO is found @@ -490,7 +490,7 @@ by pinging the USRP and making sure the LEDs start to blink. - Communication -# How do I enable X forwarding so I can run X apps on the e3x0?\n - In the file `/etc/ssh/sshd_config`, unmcomment the line `#X11Forwarding no` + In the file `/etc/ssh/sshd_config`, uncomment the line `#X11Forwarding no` and change "no" to "yes". \section e3x0_apps Applications |