diff options
Diffstat (limited to 'host/docs')
| -rw-r--r-- | host/docs/usrp_x3x0.dox | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/host/docs/usrp_x3x0.dox b/host/docs/usrp_x3x0.dox index d97923345..618dd5714 100644 --- a/host/docs/usrp_x3x0.dox +++ b/host/docs/usrp_x3x0.dox @@ -67,35 +67,35 @@ lead to you bricking the USRP! If your network configuration is correct, running `uhd_find_devices` will find your USRP and print some information about it. You will also be able to ping the USRP by running: - ping 192.168.10.2 + ping 192.168.10.2 on the command line. At this point, you should also run: - uhd_usrp_probe --args addr=192.168.10.2 + uhd_usrp_probe --args addr=192.168.10.2 to make sure all of your components (daughterboards, GPSDO) are correctly detected and usable. -\subsection x3x0_getting_started_fw_update Updating the firmware +\subsection x3x0_getting_started_fpga_update Updating the FPGA If the output from `uhd_find_devices` and `uhd_usrp_probe` didn't show any warnings, you -can skip this step. However, if there were warnings regarding version incompatibility, you will -have to upate the FPGA image before you can start using your USRP. +can skip this step. However, if there were errors regarding the FPGA version compatibility +number, you will have to update the FPGA image before you can start using your USRP. 1. Download the current UHD images. You can use the `uhd_images_downloader` script provided with UHD (see also \ref page_images). 2. Use the `usrp_x3xx_fpga_burner` utility to update the FPGA image. On the command line, run: - usrp_x3xx_fpga_burner --addr=192.168.10.2 --type=HGS # Since we are using 1GigE, type is HGS + usrp_x3xx_fpga_burner --addr=192.168.10.2 --type=HGS If you have installed the images to a non-standard location, you might need to run (change the filename according to your device): usrp_x3xx_fpga_burner --addr=192.168.10.2 --fpga-path <path_to_images>/usrp_x310_fpga_HGS.bit - The process of updating the firmware will take several minutes. Make sure the process of flashing the image does not get interrupted. + The process of updating the FPGA will take several minutes. Make sure the process of flashing the image does not get interrupted. See \ref x3x0_flash for more details. -When your firmware is up to date, power-cycle the device and re-run `uhd_usrp_probe`. There should +When your FPGA is up to date, power-cycle the device and re-run `uhd_usrp_probe`. There should be no more warnings at this point, and all components should be correctly detected. Your USRP is now ready for development! |