diff options
Diffstat (limited to 'host/docs/usrp_e1xx.rst')
| -rw-r--r-- | host/docs/usrp_e1xx.rst | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/host/docs/usrp_e1xx.rst b/host/docs/usrp_e1xx.rst index b2a6ff08c..036d2c02c 100644 --- a/host/docs/usrp_e1xx.rst +++ b/host/docs/usrp_e1xx.rst @@ -35,11 +35,11 @@ To use the 61.44MHz clock rate, the USRP embedded will require two jumpers to be * J16 is a two pin header, remove the jumper (or leave it on pin1 only) * J15 is a three pin header, move the jumper to (pin1, pin2) -Then run the following commands to record the setting in the EEPROM: +Then run the following commands to record the setting into the EEPROM: :: cd <install-path>/share/uhd/utils - ./usrp_burn_mb_eeprom --key=master_clock_rate --val=61.44e6 + ./usrp_burn_mb_eeprom --key=mcr --val=61.44e6 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -50,11 +50,11 @@ To use other clock rates, the jumpers will need to be in the default position. * J16 is a two pin header, move the jumper to (pin1, pin2) * J15 is a three pin header, move the jumper to (pin2, pin3) -Then run the following commands to record the setting in the EEPROM: +Then run the following commands to record the setting into the EEPROM: :: cd <install-path>/share/uhd/utils - ./usrp_burn_mb_eeprom --key=master_clock_rate --val=<rate> + ./usrp_burn_mb_eeprom --key=mcr --val=<rate> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Clock rate recovery - unbricking |