diff options
Diffstat (limited to 'host/docs/usrp_b1xx.rst')
| -rw-r--r-- | host/docs/usrp_b1xx.rst | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/host/docs/usrp_b1xx.rst b/host/docs/usrp_b1xx.rst index b38936021..08eeb441b 100644 --- a/host/docs/usrp_b1xx.rst +++ b/host/docs/usrp_b1xx.rst @@ -34,19 +34,19 @@ A few notable rates are: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Set 61.44MHz - uses external VCXO ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -To use the 61.44MHz clock rate, the USRP embedded will require two jumpers to be moved. +To use the 61.44MHz clock rate, the USRP embedded will require one jumper to be moved, +and X4 must be populated with a 61.44 MHz oscillator. -* **J16** is a two pin header, remove the jumper (or leave it on pin1 only) * **J15** is a three pin header, move the jumper to (pin1, pin2) +* **357LB3I061M4400** is the recommended oscillator for X4 **Note:** See instructions below to communicate the desired clock rate into UHD. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Set other rates - uses internal VCO ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -To use other clock rates, the jumpers will need to be in the default position. +To use other clock rates, the jumper will need to be in the default position. -* **J16** is a two pin header, move the jumper to (pin1, pin2) * **J15** is a three pin header, move the jumper to (pin2, pin3) To communicate the desired clock rate into UHD, |