diff options
Diffstat (limited to 'host/docs/usrp2.rst')
| -rw-r--r-- | host/docs/usrp2.rst | 25 |
1 files changed, 14 insertions, 11 deletions
diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 70101bd87..161170f2c 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -25,11 +25,11 @@ Use the card burner tool (unix) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - sudo <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + sudo <install-path>/share/uhd/utils/usrp2_card_burner_gui.py -- OR -- - cd <prefix>/share/uhd/utils + cd <install-path>/share/uhd/utils sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fpga=<path_to_fpga_image> sudo ./usrp2_card_burner.py --dev=/dev/sd<XXX> --fw=<path_to_firmware_image> @@ -42,7 +42,7 @@ Use the card burner tool (windows) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - <path_to_python.exe> <prefix>/share/uhd/utils/usrp2_card_burner_gui.py + <path_to_python.exe> <install-path>/share/uhd/utils/usrp2_card_burner_gui.py ------------------------------------------------------------------------ @@ -58,17 +58,20 @@ Use the net burner tool (unix) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - cd <prefix>/share/uhd/utils - ./usrp_n2xx_net_burner.py --ip=<ip address> --fw=<path for firmware image> - ./usrp_n2xx_net_burner.py --ip=<ip address> --fpga=<path to FPGA image> + sudo <install-path>/share/uhd/utils/usrp_n2xx_net_burner_gui.py + + -- OR -- + + cd <install-path>/share/uhd/utils + ./usrp_n2xx_net_burner.py --addr=<ip address> --fw=<path for firmware image> + ./usrp_n2xx_net_burner.py --addr=<ip address> --fpga=<path to FPGA image> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the net burner tool (Windows) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ :: - <path_to_python.exe> <prefix>/share/uhd/utils/usrp_n2xx_net_burner.py --ip=<ip address> --fw=<path for firmware image> - <path_to_python.exe> <prefix>/share/uhd/utils/usrp_n2xx_net_burner.py --ip=<ip address> --fpga=<path to FPGA image> + <path_to_python.exe> <install-path>/share/uhd/utils/usrp_n2xx_net_burner_gui.py ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Device recovery and bricking @@ -142,7 +145,7 @@ and the network must be setup properly as described above. Run the following commands: :: - cd <prefix>/share/uhd/utils + cd <install-path>/share/uhd/utils ./usrp_burn_mb_eeprom --args=<optional device args> --key=ip-addr --val=192.168.10.3 **Method 2 (Linux Only):** @@ -151,7 +154,7 @@ It uses raw ethernet packets to bypass the IP/UDP layer to communicate with the Run the following commands: :: - cd <prefix>/share/uhd/utils + cd <install-path>/share/uhd/utils sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.3 ------------------------------------------------------------------------ @@ -340,5 +343,5 @@ Test the PPS input with the following app: :: - cd <prefix>/share/uhd/examples + cd <install-path>/share/uhd/examples ./test_pps_input --args=<args> |