1 files changed, 91 insertions, 0 deletions
diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst
new file mode 100644
index 000000000..be684e20e
--- /dev/null
+++ b/host/docs/usrp1.rst
@@ -0,0 +1,91 @@
+========================================================================
+UHD - USRP1 Application Notes
+========================================================================
+
+.. contents:: Table of Contents
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Specify a non-standard image
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+The standard USRP1 images installer comes with two FPGA images:
+ * **usrp1_fpga.rbf:** 2 DDCs + 2 DUCs
+ * **usrp1_fpga_4rx.rbf:** 4 DDCs + 0 DUCs
+
+By default, the USRP1 uses the FPGA image with 2 DDCs and 2 DUCs.
+However, a device address parameter can be used to override
+the FPGA image selection to use an alternate or a custom FPGA image.
+See the images application notes for installing custom images.
+
+Example device address string representations to specify non-standard firmware and/or FPGA images:
+
+::
+
+    fpga=usrp1_fpga_4rx.rbf
+
+    -- OR --
+
+    fw=usrp1_fw_custom.ihx
+
+    -- OR --
+
+    fpga=usrp1_fpga_4rx.rbf, fw=usrp1_fw_custom.ihx
+
+------------------------------------------------------------------------
+Specifying the subdevice to use
+------------------------------------------------------------------------
+The USRP1 has multiple daughterboard slots, known as slot A and slot B.
+The subdevice specification can be used to select
+the daughterboard and subdevice for each channel.
+For daughterboards with one one subdevice,
+the subdevice name may be left blank for automatic selection.
+
+Ex: The subdev spec markup string to select a WBX on slot B.
+Notice the use of the blank subdevice name for automatic selection.
+
+::
+
+    B:
+
+    -- OR --
+
+    B:0
+
+Ex: The subdev spec markup string to select a BasicRX on slot B.
+Notice that the subdevice name is always specified in the 3 possible cases.
+
+::
+
+    B:AB
+
+    -- OR --
+
+    B:A
+
+    -- OR --
+
+    B:B
+
+------------------------------------------------------------------------
+OS Specific Notes
+------------------------------------------------------------------------
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Linux - setup udev
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+On Linux, udev handles USB plug and unplug events.
+The following commands create a udev rule for the USRP1
+so that non-root users may access the device:
+
+::
+
+    echo 'ACTION=="add", BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", MODE:="0666"' > tmpfile
+    sudo chown root.root tmpfile
+    sudo mv tmpfile /etc/udev/rules.d/10-usrp.rules
+    sudo udevadm control --reload-rules
+
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Windows - install driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+On Windows, a driver must be installed the first time the USRP1 is attached to the host computer.
+A download link for this driver can be found on the UHD wiki page.
+Download and unpack the driver, and direct the Windows driver install wizard to the .inf file.