diff options
Diffstat (limited to 'host/docs/usrp1.rst')
| -rw-r--r-- | host/docs/usrp1.rst | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst index c1fdec146..b6fd24b09 100644 --- a/host/docs/usrp1.rst +++ b/host/docs/usrp1.rst @@ -79,7 +79,7 @@ Hardware Setup Notes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ External clock modification ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The USRP can be modified to accept an external clock reference instead of the 64MHz onboard reference. +The USRP device can be modified to accept an external clock reference instead of the 64MHz onboard reference. * Solder SMA (**LTI-SASF54GT**) connector to **J2001**. * Move 0 ohm 0603 resistor **R2029** to **R2030**. * Move 0.01uF 0603 capacitor **C925** to **C926**. @@ -89,7 +89,7 @@ The new external clock needs to be a square wave between +7dBm and +15dBm After the hardware modification, the user should burn the setting into the EEPROM, -so UHD can initialize with the correct clock rate. +so UHD software can initialize with the correct clock rate. Run the following commands to record the setting into the EEPROM: :: |