diff options
Diffstat (limited to 'host/docs/usrp1.rst')
| -rw-r--r-- | host/docs/usrp1.rst | 24 |
1 files changed, 16 insertions, 8 deletions
diff --git a/host/docs/usrp1.rst b/host/docs/usrp1.rst index b6fd24b09..be74fe00a 100644 --- a/host/docs/usrp1.rst +++ b/host/docs/usrp1.rst @@ -1,5 +1,5 @@ ======================================================================== -UHD - USRP1 Application Notes +UHD - USRP1 Device Manual ======================================================================== .. contents:: Table of Contents @@ -8,12 +8,20 @@ UHD - USRP1 Application Notes Comparative features list ------------------------------------------------------------------------ -* 2 transceiver card slots -* 2 RX DDC chains in FPGA -* 2 TX DUC chains in FPGA (no TX CORDIC -> uses DAC) -* 64 MHz fixed clock rate -* sc16 sample modes -* sc8 sample mode - RX only +**Hardware Capabilities:** + * 2 transceiver card slots + * 64 MHz fixed clock rate + +**FPGA Capabilities:** + * 2 RX DDC chains in FPGA + * 2 TX DUC chains in FPGA (no TX CORDIC -> uses DAC) + * sc16 sample modes - RX & TX + + - Up to 8 MHz of RF BW with 16-bit samples + + * sc8 sample mode - RX only + + - Up to 16 MHz of RF BW with 8-bit samples ------------------------------------------------------------------------ Specify a Non-standard Image @@ -93,7 +101,7 @@ so UHD software can initialize with the correct clock rate. Run the following commands to record the setting into the EEPROM: :: - cd <install-path>/share/uhd/utils + cd <install-path>/lib/uhd/utils ./usrp_burn_mb_eeprom --args=<optional device args> --key=mcr --val=<rate> The user may override the clock rate specified in the EEPROM by using a device address: |