diff options
Diffstat (limited to 'host/docs/dboards.rst')
| -rw-r--r-- | host/docs/dboards.rst | 17 |
1 files changed, 11 insertions, 6 deletions
diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index 29812592f..4b5a074a8 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -1,5 +1,5 @@ ======================================================================== -UHD - Daughterboard Application Notes +UHD Daughterboard Application Notes ======================================================================== .. contents:: Table of Contents @@ -255,6 +255,11 @@ LEDs: * **RX1/RX2**: Receiver on RX2 antenna port ^^^^^^^^^^^^^^^^^^^^^^^^^^^ +CBX +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +See SBX Series for more details. + +^^^^^^^^^^^^^^^^^^^^^^^^^^^ TVRX ^^^^^^^^^^^^^^^^^^^^^^^^^^^ The TVRX board has 1 real-mode frontend. @@ -335,14 +340,14 @@ With the daughterboard plugged-in, run the following commands: cd <install-path>/share/uhd/utils ./usrp_burn_db_eeprom --id=0x000d --unit=RX --args=<args> --slot=<slot> -* **<args>** are device address arguments (optional if only one USRP is on your machine) -* **<slot>** is the name of the daughterboard slot (optional if the USRP has only one slot) +* **<args>** are device address arguments (optional if only one USRP device is on your machine) +* **<slot>** is the name of the daughterboard slot (optional if the USRP device has only one slot) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ RFX - Mod ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Older RFX boards require modifications to use the motherboard oscillator. -If this is the case, UHD will print a warning about the modification. +If this is the case, UHD software will print a warning about the modification. Please follow the modification procedures below: **Step 1: Disable the daughterboard clocks** @@ -377,5 +382,5 @@ With the daughterboard plugged-in, run the following commands: * **RFX1800:** 0x0035 * **RFX1200:** 0x002a * **RFX2400:** 0x002b -* **<args>** are device address arguments (optional if only one USRP is on your machine) -* **<slot>** is the name of the daughterboard slot (optional if the USRP has only one slot) +* **<args>** are device address arguments (optional if only one USRP device is on your machine) +* **<slot>** is the name of the daughterboard slot (optional if the USRP device has only one slot) |