diff options
Diffstat (limited to 'host/docs/configuration.dox')
| -rw-r--r-- | host/docs/configuration.dox | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/host/docs/configuration.dox b/host/docs/configuration.dox index aa054b650..ccc3129fb 100644 --- a/host/docs/configuration.dox +++ b/host/docs/configuration.dox @@ -23,10 +23,10 @@ and possible more options. Key | Description | Supported Devices | Example Value ---------------------|------------------------------------------------------------------------------|-------------------|--------------------- blank_eeprom | *Caution!* Having this key will erase the EEPROM and can damage your device! | X3x0 | blank_eeprom=1 - fpga | Provide alternative FPGA bitfile | All USB Devices, X3x0 (PCIe only), All embedded devices | fpga=/path/to/bitfile.bit + fpga | Provide alternative FPGA bitfile | All USB Devices, X3x0 (PCIe only), E310, E1x0 | fpga=/path/to/bitfile.bit fw | Provide alternative firmware | All USB Devices, X3x0 | fw=/path/to/fw.bin ignore-cal-file | Ignores existing device calibration files | All Devices with cal-file support| See \ref ignore_cal_file - master_clock_rate | Master Clock Rate in Hz | X3x0, B2x0, B1x0, E3x0, E1x0 | master_clock_rate=16e6 + master_clock_rate | Master Clock Rate in Hz | X3x0, B2x0, B1x0, E3x0, E1x0, N3xx | master_clock_rate=16e6 dboard_clock_rate | Daughterboard clock rate in Hz | X3x0 | dboard_clock_rate=50e6 mcr | Override master clock rate settings (see \ref usrp1_hw_extclk) | USRP1 | mcr=52e6 niusrprpc_port | RPC Port for NI USRP RIO | X3x0 | niusrprpc_port=5445 @@ -34,9 +34,9 @@ and possible more options. self_cal_adc_delay | Run ADC transfer delay self-calibration. | X3x0 | self_cal_adc_delay=1 ext_adc_self_test | Run an extended ADC self test (more than the usual) | X3x0 | ext_adc_self_test=1 recover_mb_eeprom | Disable version checks. Can damage hardware. Only recommended for recovering devices with corrupted EEPROMs. | X3x0, N230 | recover_mb_eeprom=1 - skip_dram | Ignore DRAM FIFO block. Connect TX streamers straight into DUC or radio. | X3x0 | skip_dram=1 - skip_ddc | Ignore DDC block. Connect Rx streamers straight into radio. | X3x0 | skip_ddc=1 - skip_duc | Ignore DUC block. Connect Rx streamers or DRAM straight into radio. | X3x0 | skip_duc=1 + skip_dram | Ignore DRAM FIFO block. Connect TX streamers straight into DUC or radio. | X3x0, N3x0 | skip_dram=1 + skip_ddc | Ignore DDC block. Connect Rx streamers straight into radio. | X3x0, N3x0 | skip_ddc=1 + skip_duc | Ignore DUC block. Connect Rx streamers or DRAM straight into radio. | X3x0, N3x0 | skip_duc=1 In addition, many of the streaming-related options can be set per-device at configuration time. |