diff options
Diffstat (limited to 'host/docs/calibration.rst')
| -rw-r--r-- | host/docs/calibration.rst | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/host/docs/calibration.rst b/host/docs/calibration.rst index 8ba3477b8..23bef01b7 100644 --- a/host/docs/calibration.rst +++ b/host/docs/calibration.rst @@ -5,14 +5,15 @@ UHD - Calibration Application Notes .. contents:: Table of Contents ------------------------------------------------------------------------ -Self-calibration +Self-Calibration ------------------------------------------------------------------------ -UHD software comes with several self-calibration utilities for minimizing IQ imbalance and DC offset. -These utilities perform calibration sweeps using transmit leakage into the receive path -(special equipment is not required). -The results from a calibration are written to a CSV file in the user's home directory. -UHD software will automatically apply corrections at runtime when the user re-tunes the daughterboard LO. -Calibration results are specific to an individual RF board. +UHD software comes with several self-calibration utilities for minimizing IQ +imbalance and DC offset. These utilities perform calibration sweeps using +transmit leakage into the receive path (special equipment is not required). +The results from a calibration are written to a CSV file in the user's home +directory. UHD software will automatically apply corrections at runtime when +the user re-tunes the daughterboard LO. Calibration results are specific to an +individual RF board. **Note:** When a calibration table is present, @@ -27,10 +28,10 @@ UHD software comes with the following calibration utilities: The following RF frontends are supported by the self-calibration utilities: - * RFX transceiver board - * WBX transceiver board - * SBX transceiver board - * CBX transceiver board + * RFX Series transceiver boards + * WBX Series transceiver boards + * SBX Series transceiver boards + * CBX Series transceiver boards ******************************************** Calibration Utilities @@ -54,7 +55,7 @@ may not have a serial number. If this is the case, run the following command to into the daughterboard's EEPROM: :: - <install dir>/share/uhd/utils/usrp_burn_db_eeprom --ser=<desired serial> --args=<optional device args> + <install dir>/lib/uhd/utils/usrp_burn_db_eeprom --ser=<desired serial> --args=<optional device args> ******************************************** Calibration Data |