diff options
Diffstat (limited to 'host/cmake')
| -rw-r--r-- | host/cmake/Modules/FindORC.cmake | 36 | ||||
| -rw-r--r-- | host/cmake/Modules/FindUSB1.cmake | 15 | ||||
| -rw-r--r-- | host/cmake/Modules/NSIS.InstallOptions.ini.in | 37 | ||||
| -rw-r--r-- | host/cmake/Modules/NSIS.template.in | 955 | ||||
| -rw-r--r-- | host/cmake/Modules/UHDPackage.cmake | 9 | ||||
| -rw-r--r-- | host/cmake/Modules/UHDUnitTest.cmake | 110 | ||||
| -rwxr-xr-x | host/cmake/debian/postinst.in | 4 | ||||
| -rwxr-xr-x | host/cmake/redhat/post_install.in | 4 |
8 files changed, 1159 insertions, 11 deletions
diff --git a/host/cmake/Modules/FindORC.cmake b/host/cmake/Modules/FindORC.cmake new file mode 100644 index 000000000..0d9fc9ca1 --- /dev/null +++ b/host/cmake/Modules/FindORC.cmake @@ -0,0 +1,36 @@ +######################################################################## +# Find the library for ORC development files +######################################################################## + +INCLUDE(FindPkgConfig) +PKG_CHECK_MODULES(PC_ORC "orc-0.4") +PKG_CHECK_MODULES(PC_ORC_V4_11 "orc-0.4 > 0.4.11") + +#we are using the pkg config as a version check +#if we have pkg config, the right version must be found +#the alternative is that no pkg config orc is found +if (PC_ORC_V4_11_FOUND OR (NOT PC_ORC_FOUND AND NOT PC_ORC_V4_11_FOUND)) + +FIND_PATH( + ORC_INCLUDE_DIRS + NAMES orc/orc.h + HINTS $ENV{ORC_DIR}/include/orc-0.4 + ${PC_ORC_INCLUDEDIR} + PATHS /usr/local/include/orc-0.4 + /usr/include/orc-0.4 +) + +FIND_LIBRARY( + ORC_LIBRARIES + NAMES orc-0.4 + HINTS $ENV{ORC_DIR}/lib + ${PC_ORC_LIBDIR} + PATHS /usr/local/lib + /usr/lib +) + +endif() #both PC ORC FOUND + +INCLUDE(FindPackageHandleStandardArgs) +FIND_PACKAGE_HANDLE_STANDARD_ARGS(ORC DEFAULT_MSG ORC_LIBRARIES ORC_INCLUDE_DIRS) +MARK_AS_ADVANCED(ORC_LIBRARIES ORC_INCLUDE_DIRS) diff --git a/host/cmake/Modules/FindUSB1.cmake b/host/cmake/Modules/FindUSB1.cmake index 21005344b..a1ab4ca90 100644 --- a/host/cmake/Modules/FindUSB1.cmake +++ b/host/cmake/Modules/FindUSB1.cmake @@ -32,7 +32,20 @@ FIND_LIBRARY(LIBUSB_LIBRARIES PATHS /usr/local/lib /usr/lib /opt/local/lib ) +enable_language(C) #needs C support for check below +include(CheckFunctionExists) +if(LIBUSB_INCLUDE_DIRS) + set(CMAKE_REQUIRED_INCLUDES ${LIBUSB_INCLUDE_DIRS}) +endif() +if(LIBUSB_LIBRARIES) + set(CMAKE_REQUIRED_LIBRARIES ${LIBUSB_LIBRARIES}) +endif() +CHECK_FUNCTION_EXISTS("libusb_handle_events_timeout_completed" HAVE_LIBUSB_HANDLE_EVENTS_TIMEOUT_COMPLETED) + +if(HAVE_LIBUSB_HANDLE_EVENTS_TIMEOUT_COMPLETED) + list(APPEND LIBUSB_DEFINITIONS "HAVE_LIBUSB_HANDLE_EVENTS_TIMEOUT_COMPLETED=1") +endif(HAVE_LIBUSB_HANDLE_EVENTS_TIMEOUT_COMPLETED) + include(FindPackageHandleStandardArgs) FIND_PACKAGE_HANDLE_STANDARD_ARGS(LIBUSB DEFAULT_MSG LIBUSB_LIBRARIES LIBUSB_INCLUDE_DIRS) MARK_AS_ADVANCED(LIBUSB_INCLUDE_DIRS LIBUSB_LIBRARIES) - diff --git a/host/cmake/Modules/NSIS.InstallOptions.ini.in b/host/cmake/Modules/NSIS.InstallOptions.ini.in new file mode 100644 index 000000000..969a3ae52 --- /dev/null +++ b/host/cmake/Modules/NSIS.InstallOptions.ini.in @@ -0,0 +1,37 @@ +[Settings] +NumFields=4 + +[Field 1] +Type=label +Text=By default the USRP Hardware Driver (UHD) does not add its directory to the system PATH. +Left=0 +Right=-1 +Top=0 +Bottom=20 + +[Field 2] +Type=radiobutton +Text=Do not add @CPACK_PACKAGE_NAME@ to the system PATH +Left=0 +Right=-1 +Top=30 +Bottom=40 +State=1 + +[Field 3] +Type=radiobutton +Text=Add @CPACK_PACKAGE_NAME@ to the system PATH for all users +Left=0 +Right=-1 +Top=40 +Bottom=50 +State=0 + +[Field 4] +Type=radiobutton +Text=Add @CPACK_PACKAGE_NAME@ to the system PATH for current user +Left=0 +Right=-1 +Top=50 +Bottom=60 +State=0 diff --git a/host/cmake/Modules/NSIS.template.in b/host/cmake/Modules/NSIS.template.in new file mode 100644 index 000000000..3ab55d907 --- /dev/null +++ b/host/cmake/Modules/NSIS.template.in @@ -0,0 +1,955 @@ +; CPack install script designed for a nmake build + +;-------------------------------- +; You must define these values + + !define VERSION "@CPACK_PACKAGE_VERSION@" + !define PATCH "@CPACK_PACKAGE_VERSION_PATCH@" + !define INST_DIR "@CPACK_TEMPORARY_DIRECTORY@" + +;-------------------------------- +;Variables + + Var MUI_TEMP + Var STARTMENU_FOLDER + Var SV_ALLUSERS + Var START_MENU + Var DO_NOT_ADD_TO_PATH + Var ADD_TO_PATH_ALL_USERS + Var ADD_TO_PATH_CURRENT_USER + Var INSTALL_DESKTOP + Var IS_DEFAULT_INSTALLDIR +;-------------------------------- +;Include Modern UI + + !include "MUI.nsh" + + ;Default installation folder + InstallDir "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" + +;-------------------------------- +;General + + ;Name and file + Name "USRP Hardware Driver" + OutFile "@CPACK_TOPLEVEL_DIRECTORY@/@CPACK_OUTPUT_FILE_NAME@" + + ;Set compression + SetCompressor @CPACK_NSIS_COMPRESSOR@ + +@CPACK_NSIS_DEFINES@ + + !include Sections.nsh + +;--- Component support macros: --- +; The code for the add/remove functionality is from: +; http://nsis.sourceforge.net/Add/Remove_Functionality +; It has been modified slightly and extended to provide +; inter-component dependencies. +Var AR_SecFlags +Var AR_RegFlags +@CPACK_NSIS_SECTION_SELECTED_VARS@ + +; Loads the "selected" flag for the section named SecName into the +; variable VarName. +!macro LoadSectionSelectedIntoVar SecName VarName + SectionGetFlags ${${SecName}} $${VarName} + IntOp $${VarName} $${VarName} & ${SF_SELECTED} ;Turn off all other bits +!macroend + +; Loads the value of a variable... can we get around this? +!macro LoadVar VarName + IntOp $R0 0 + $${VarName} +!macroend + +; Sets the value of a variable +!macro StoreVar VarName IntValue + IntOp $${VarName} 0 + ${IntValue} +!macroend + +!macro InitSection SecName + ; This macro reads component installed flag from the registry and + ;changes checked state of the section on the components page. + ;Input: section index constant name specified in Section command. + + ClearErrors + ;Reading component status from registry + ReadRegDWORD $AR_RegFlags HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" "Installed" + IfErrors "default_${SecName}" + ;Status will stay default if registry value not found + ;(component was never installed) + IntOp $AR_RegFlags $AR_RegFlags & ${SF_SELECTED} ;Turn off all other bits + SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading default section flags + IntOp $AR_SecFlags $AR_SecFlags & 0xFFFE ;Turn lowest (enabled) bit off + IntOp $AR_SecFlags $AR_RegFlags | $AR_SecFlags ;Change lowest bit + + ; Note whether this component was installed before + !insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags + IntOp $R0 $AR_RegFlags & $AR_RegFlags + + ;Writing modified flags + SectionSetFlags ${${SecName}} $AR_SecFlags + + "default_${SecName}:" + !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected +!macroend + +!macro FinishSection SecName + ; This macro reads section flag set by user and removes the section + ;if it is not selected. + ;Then it writes component installed flag to registry + ;Input: section index constant name specified in Section command. + + SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading section flags + ;Checking lowest bit: + IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED} + IntCmp $AR_SecFlags 1 "leave_${SecName}" + ;Section is not selected: + ;Calling Section uninstall macro and writing zero installed flag + !insertmacro "Remove_${${SecName}}" + WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \ + "Installed" 0 + Goto "exit_${SecName}" + + "leave_${SecName}:" + ;Section is selected: + WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}" \ + "Installed" 1 + + "exit_${SecName}:" +!macroend + +!macro RemoveSection SecName + ; This macro is used to call section's Remove_... macro + ;from the uninstaller. + ;Input: section index constant name specified in Section command. + + !insertmacro "Remove_${${SecName}}" +!macroend + +; Determine whether the selection of SecName changed +!macro MaybeSelectionChanged SecName + !insertmacro LoadVar ${SecName}_selected + SectionGetFlags ${${SecName}} $R1 + IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits + + ; See if the status has changed: + IntCmp $R0 $R1 "${SecName}_unchanged" + !insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected + + IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected" + !insertmacro "Deselect_required_by_${SecName}" + goto "${SecName}_unchanged" + + "${SecName}_was_selected:" + !insertmacro "Select_${SecName}_depends" + + "${SecName}_unchanged:" +!macroend +;--- End of Add/Remove macros --- + +;-------------------------------- +;Interface Settings + + !define MUI_HEADERIMAGE + !define MUI_ABORTWARNING + +;-------------------------------- +; path functions + +!verbose 3 +!include "WinMessages.NSH" +!verbose 4 + +;---------------------------------------- +; based upon a script of "Written by KiCHiK 2003-01-18 05:57:02" +;---------------------------------------- +!verbose 3 +!include "WinMessages.NSH" +!verbose 4 +;==================================================== +; get_NT_environment +; Returns: the selected environment +; Output : head of the stack +;==================================================== +!macro select_NT_profile UN +Function ${UN}select_NT_profile + StrCmp $ADD_TO_PATH_ALL_USERS "1" 0 environment_single + DetailPrint "Selected environment for all users" + Push "all" + Return + environment_single: + DetailPrint "Selected environment for current user only." + Push "current" + Return +FunctionEnd +!macroend +!insertmacro select_NT_profile "" +!insertmacro select_NT_profile "un." +;---------------------------------------------------- +!define NT_current_env 'HKCU "Environment"' +!define NT_all_env 'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"' + +!ifndef WriteEnvStr_RegKey + !ifdef ALL_USERS + !define WriteEnvStr_RegKey \ + 'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"' + !else + !define WriteEnvStr_RegKey 'HKCU "Environment"' + !endif +!endif + +; AddToPath - Adds the given dir to the search path. +; Input - head of the stack +; Note - Win9x systems requires reboot + +Function AddToPath + Exch $0 + Push $1 + Push $2 + Push $3 + + # don't add if the path doesn't exist + IfFileExists "$0\*.*" "" AddToPath_done + + ReadEnvStr $1 PATH + ; if the path is too long for a NSIS variable NSIS will return a 0 + ; length string. If we find that, then warn and skip any path + ; modification as it will trash the existing path. + StrLen $2 $1 + IntCmp $2 0 CheckPathLength_ShowPathWarning CheckPathLength_Done CheckPathLength_Done + CheckPathLength_ShowPathWarning: + Messagebox MB_OK|MB_ICONEXCLAMATION "Warning! PATH too long installer unable to modify PATH!" + Goto AddToPath_done + CheckPathLength_Done: + Push "$1;" + Push "$0;" + Call StrStr + Pop $2 + StrCmp $2 "" "" AddToPath_done + Push "$1;" + Push "$0\;" + Call StrStr + Pop $2 + StrCmp $2 "" "" AddToPath_done + GetFullPathName /SHORT $3 $0 + Push "$1;" + Push "$3;" + Call StrStr + Pop $2 + StrCmp $2 "" "" AddToPath_done + Push "$1;" + Push "$3\;" + Call StrStr + Pop $2 + StrCmp $2 "" "" AddToPath_done + + Call IsNT + Pop $1 + StrCmp $1 1 AddToPath_NT + ; Not on NT + StrCpy $1 $WINDIR 2 + FileOpen $1 "$1\autoexec.bat" a + FileSeek $1 -1 END + FileReadByte $1 $2 + IntCmp $2 26 0 +2 +2 # DOS EOF + FileSeek $1 -1 END # write over EOF + FileWrite $1 "$\r$\nSET PATH=%PATH%;$3$\r$\n" + FileClose $1 + SetRebootFlag true + Goto AddToPath_done + + AddToPath_NT: + StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey + ReadRegStr $1 ${NT_current_env} "PATH" + Goto DoTrim + ReadAllKey: + ReadRegStr $1 ${NT_all_env} "PATH" + DoTrim: + StrCmp $1 "" AddToPath_NTdoIt + Push $1 + Call Trim + Pop $1 + StrCpy $0 "$1;$0" + AddToPath_NTdoIt: + StrCmp $ADD_TO_PATH_ALL_USERS "1" WriteAllKey + WriteRegExpandStr ${NT_current_env} "PATH" $0 + Goto DoSend + WriteAllKey: + WriteRegExpandStr ${NT_all_env} "PATH" $0 + DoSend: + SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000 + + AddToPath_done: + Pop $3 + Pop $2 + Pop $1 + Pop $0 +FunctionEnd + + +; RemoveFromPath - Remove a given dir from the path +; Input: head of the stack + +Function un.RemoveFromPath + Exch $0 + Push $1 + Push $2 + Push $3 + Push $4 + Push $5 + Push $6 + + IntFmt $6 "%c" 26 # DOS EOF + + Call un.IsNT + Pop $1 + StrCmp $1 1 unRemoveFromPath_NT + ; Not on NT + StrCpy $1 $WINDIR 2 + FileOpen $1 "$1\autoexec.bat" r + GetTempFileName $4 + FileOpen $2 $4 w + GetFullPathName /SHORT $0 $0 + StrCpy $0 "SET PATH=%PATH%;$0" + Goto unRemoveFromPath_dosLoop + + unRemoveFromPath_dosLoop: + FileRead $1 $3 + StrCpy $5 $3 1 -1 # read last char + StrCmp $5 $6 0 +2 # if DOS EOF + StrCpy $3 $3 -1 # remove DOS EOF so we can compare + StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoopRemoveLine + StrCmp $3 "$0$\n" unRemoveFromPath_dosLoopRemoveLine + StrCmp $3 "$0" unRemoveFromPath_dosLoopRemoveLine + StrCmp $3 "" unRemoveFromPath_dosLoopEnd + FileWrite $2 $3 + Goto unRemoveFromPath_dosLoop + unRemoveFromPath_dosLoopRemoveLine: + SetRebootFlag true + Goto unRemoveFromPath_dosLoop + + unRemoveFromPath_dosLoopEnd: + FileClose $2 + FileClose $1 + StrCpy $1 $WINDIR 2 + Delete "$1\autoexec.bat" + CopyFiles /SILENT $4 "$1\autoexec.bat" + Delete $4 + Goto unRemoveFromPath_done + + unRemoveFromPath_NT: + StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey + ReadRegStr $1 ${NT_current_env} "PATH" + Goto unDoTrim + unReadAllKey: + ReadRegStr $1 ${NT_all_env} "PATH" + unDoTrim: + StrCpy $5 $1 1 -1 # copy last char + StrCmp $5 ";" +2 # if last char != ; + StrCpy $1 "$1;" # append ; + Push $1 + Push "$0;" + Call un.StrStr ; Find `$0;` in $1 + Pop $2 ; pos of our dir + StrCmp $2 "" unRemoveFromPath_done + ; else, it is in path + # $0 - path to add + # $1 - path var + StrLen $3 "$0;" + StrLen $4 $2 + StrCpy $5 $1 -$4 # $5 is now the part before the path to remove + StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove + StrCpy $3 $5$6 + + StrCpy $5 $3 1 -1 # copy last char + StrCmp $5 ";" 0 +2 # if last char == ; + StrCpy $3 $3 -1 # remove last char + + StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey + WriteRegExpandStr ${NT_current_env} "PATH" $3 + Goto unDoSend + unWriteAllKey: + WriteRegExpandStr ${NT_all_env} "PATH" $3 + unDoSend: + SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment" /TIMEOUT=5000 + + unRemoveFromPath_done: + Pop $6 + Pop $5 + Pop $4 + Pop $3 + Pop $2 + Pop $1 + Pop $0 +FunctionEnd + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +; Uninstall sutff +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +########################################### +# Utility Functions # +########################################### + +;==================================================== +; IsNT - Returns 1 if the current system is NT, 0 +; otherwise. +; Output: head of the stack +;==================================================== +; IsNT +; no input +; output, top of the stack = 1 if NT or 0 if not +; +; Usage: +; Call IsNT +; Pop $R0 +; ($R0 at this point is 1 or 0) + +!macro IsNT un +Function ${un}IsNT + Push $0 + ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion" CurrentVersion + StrCmp $0 "" 0 IsNT_yes + ; we are not NT. + Pop $0 + Push 0 + Return + + IsNT_yes: + ; NT!!! + Pop $0 + Push 1 +FunctionEnd +!macroend +!insertmacro IsNT "" +!insertmacro IsNT "un." + +; StrStr +; input, top of stack = string to search for +; top of stack-1 = string to search in +; output, top of stack (replaces with the portion of the string remaining) +; modifies no other variables. +; +; Usage: +; Push "this is a long ass string" +; Push "ass" +; Call StrStr +; Pop $R0 +; ($R0 at this point is "ass string") + +!macro StrStr un +Function ${un}StrStr +Exch $R1 ; st=haystack,old$R1, $R1=needle + Exch ; st=old$R1,haystack + Exch $R2 ; st=old$R1,old$R2, $R2=haystack + Push $R3 + Push $R4 + Push $R5 + StrLen $R3 $R1 + StrCpy $R4 0 + ; $R1=needle + ; $R2=haystack + ; $R3=len(needle) + ; $R4=cnt + ; $R5=tmp + loop: + StrCpy $R5 $R2 $R3 $R4 + StrCmp $R5 $R1 done + StrCmp $R5 "" done + IntOp $R4 $R4 + 1 + Goto loop +done: + StrCpy $R1 $R2 "" $R4 + Pop $R5 + Pop $R4 + Pop $R3 + Pop $R2 + Exch $R1 +FunctionEnd +!macroend +!insertmacro StrStr "" +!insertmacro StrStr "un." + +Function Trim ; Added by Pelaca + Exch $R1 + Push $R2 +Loop: + StrCpy $R2 "$R1" 1 -1 + StrCmp "$R2" " " RTrim + StrCmp "$R2" "$\n" RTrim + StrCmp "$R2" "$\r" RTrim + StrCmp "$R2" ";" RTrim + GoTo Done +RTrim: + StrCpy $R1 "$R1" -1 + Goto Loop +Done: + Pop $R2 + Exch $R1 +FunctionEnd + +Function ConditionalAddToRegisty + Pop $0 + Pop $1 + StrCmp "$0" "" ConditionalAddToRegisty_EmptyString + WriteRegStr SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" \ + "$1" "$0" + ;MessageBox MB_OK "Set Registry: '$1' to '$0'" + DetailPrint "Set install registry entry: '$1' to '$0'" + ConditionalAddToRegisty_EmptyString: +FunctionEnd + +;-------------------------------- + +!ifdef CPACK_USES_DOWNLOAD +Function DownloadFile + IfFileExists $INSTDIR\* +2 + CreateDirectory $INSTDIR + Pop $0 + + ; Skip if already downloaded + IfFileExists $INSTDIR\$0 0 +2 + Return + + StrCpy $1 "@CPACK_DOWNLOAD_SITE@" + + try_again: + NSISdl::download "$1/$0" "$INSTDIR\$0" + + Pop $1 + StrCmp $1 "success" success + StrCmp $1 "Cancelled" cancel + MessageBox MB_OK "Download failed: $1" + cancel: + Return + success: +FunctionEnd +!endif + +;-------------------------------- +; Installation types +@CPACK_NSIS_INSTALLATION_TYPES@ + +;-------------------------------- +; Component sections +@CPACK_NSIS_COMPONENT_SECTIONS@ + +;-------------------------------- +; Define some macro setting for the gui +@CPACK_NSIS_INSTALLER_MUI_ICON_CODE@ +@CPACK_NSIS_INSTALLER_ICON_CODE@ +@CPACK_NSIS_INSTALLER_MUI_COMPONENTS_DESC@ +@CPACK_NSIS_INSTALLER_MUI_FINISHPAGE_RUN_CODE@ + +;-------------------------------- +;Pages + !insertmacro MUI_PAGE_WELCOME + + !insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@" + Page custom InstallOptionsPage + !insertmacro MUI_PAGE_DIRECTORY + + ;Start Menu Folder Page Configuration + !define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX" + !define MUI_STARTMENUPAGE_REGISTRY_KEY "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" + !define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder" + !insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER + + @CPACK_NSIS_PAGE_COMPONENTS@ + + !insertmacro MUI_PAGE_INSTFILES + !insertmacro MUI_PAGE_FINISH + + !insertmacro MUI_UNPAGE_CONFIRM + !insertmacro MUI_UNPAGE_INSTFILES + +;-------------------------------- +;Languages + + !insertmacro MUI_LANGUAGE "English" ;first language is the default language + !insertmacro MUI_LANGUAGE "Albanian" + !insertmacro MUI_LANGUAGE "Arabic" + !insertmacro MUI_LANGUAGE "Basque" + !insertmacro MUI_LANGUAGE "Belarusian" + !insertmacro MUI_LANGUAGE "Bosnian" + !insertmacro MUI_LANGUAGE "Breton" + !insertmacro MUI_LANGUAGE "Bulgarian" + !insertmacro MUI_LANGUAGE "Croatian" + !insertmacro MUI_LANGUAGE "Czech" + !insertmacro MUI_LANGUAGE "Danish" + !insertmacro MUI_LANGUAGE "Dutch" + !insertmacro MUI_LANGUAGE "Estonian" + !insertmacro MUI_LANGUAGE "Farsi" + !insertmacro MUI_LANGUAGE "Finnish" + !insertmacro MUI_LANGUAGE "French" + !insertmacro MUI_LANGUAGE "German" + !insertmacro MUI_LANGUAGE "Greek" + !insertmacro MUI_LANGUAGE "Hebrew" + !insertmacro MUI_LANGUAGE "Hungarian" + !insertmacro MUI_LANGUAGE "Icelandic" + !insertmacro MUI_LANGUAGE "Indonesian" + !insertmacro MUI_LANGUAGE "Irish" + !insertmacro MUI_LANGUAGE "Italian" + !insertmacro MUI_LANGUAGE "Japanese" + !insertmacro MUI_LANGUAGE "Korean" + !insertmacro MUI_LANGUAGE "Kurdish" + !insertmacro MUI_LANGUAGE "Latvian" + !insertmacro MUI_LANGUAGE "Lithuanian" + !insertmacro MUI_LANGUAGE "Luxembourgish" + !insertmacro MUI_LANGUAGE "Macedonian" + !insertmacro MUI_LANGUAGE "Malay" + !insertmacro MUI_LANGUAGE "Mongolian" + !insertmacro MUI_LANGUAGE "Norwegian" + !insertmacro MUI_LANGUAGE "Polish" + !insertmacro MUI_LANGUAGE "Portuguese" + !insertmacro MUI_LANGUAGE "PortugueseBR" + !insertmacro MUI_LANGUAGE "Romanian" + !insertmacro MUI_LANGUAGE "Russian" + !insertmacro MUI_LANGUAGE "Serbian" + !insertmacro MUI_LANGUAGE "SerbianLatin" + !insertmacro MUI_LANGUAGE "SimpChinese" + !insertmacro MUI_LANGUAGE "Slovak" + !insertmacro MUI_LANGUAGE "Slovenian" + !insertmacro MUI_LANGUAGE "Spanish" + !insertmacro MUI_LANGUAGE "Swedish" + !insertmacro MUI_LANGUAGE "Thai" + !insertmacro MUI_LANGUAGE "TradChinese" + !insertmacro MUI_LANGUAGE "Turkish" + !insertmacro MUI_LANGUAGE "Ukrainian" + !insertmacro MUI_LANGUAGE "Welsh" + + +;-------------------------------- +;Reserve Files + + ;These files should be inserted before other files in the data block + ;Keep these lines before any File command + ;Only for solid compression (by default, solid compression is enabled for BZIP2 and LZMA) + + ReserveFile "NSIS.InstallOptions.ini" + !insertmacro MUI_RESERVEFILE_INSTALLOPTIONS + +;-------------------------------- +;Installer Sections + +Section "-Core installation" + ;Use the entire tree produced by the INSTALL target. Keep the + ;list of directories here in sync with the RMDir commands below. + SetOutPath "$INSTDIR" + @CPACK_NSIS_FULL_INSTALL@ + + ;Store installation folder + WriteRegStr SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "" $INSTDIR + + ;Create uninstaller + WriteUninstaller "$INSTDIR\Uninstall.exe" + Push "DisplayName" + Push "@CPACK_NSIS_DISPLAY_NAME@" + Call ConditionalAddToRegisty + Push "DisplayVersion" + Push "@CPACK_PACKAGE_VERSION@" + Call ConditionalAddToRegisty + Push "Publisher" + Push "@CPACK_PACKAGE_VENDOR@" + Call ConditionalAddToRegisty + Push "UninstallString" + Push "$INSTDIR\Uninstall.exe" + Call ConditionalAddToRegisty + Push "NoRepair" + Push "1" + Call ConditionalAddToRegisty + + !ifdef CPACK_NSIS_ADD_REMOVE + ;Create add/remove functionality + Push "ModifyPath" + Push "$INSTDIR\AddRemove.exe" + Call ConditionalAddToRegisty + !else + Push "NoModify" + Push "1" + Call ConditionalAddToRegisty + !endif + + ; Optional registration + Push "DisplayIcon" + Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@" + Call ConditionalAddToRegisty + Push "HelpLink" + Push "@CPACK_NSIS_HELP_LINK@" + Call ConditionalAddToRegisty + Push "URLInfoAbout" + Push "@CPACK_NSIS_URL_INFO_ABOUT@" + Call ConditionalAddToRegisty + Push "Contact" + Push "@CPACK_NSIS_CONTACT@" + Call ConditionalAddToRegisty + !insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP "NSIS.InstallOptions.ini" "Field 5" "State" + !insertmacro MUI_STARTMENU_WRITE_BEGIN Application + + ;Create shortcuts + CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER" +@CPACK_NSIS_CREATE_ICONS@ +@CPACK_NSIS_CREATE_ICONS_EXTRA@ + CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\Uninstall.lnk" "$INSTDIR\Uninstall.exe" + CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\USRP2 Card Burner.lnk" "$INSTDIR\lib\uhd\utils\usrp2_card_burner_gui.py" "" "" "" SW_SHOWMINIMIZED + CreateShortcut "$SMPROGRAMS\$STARTMENU_FOLDER\USRP-N2XX Net Burner.lnk" "$INSTDIR\lib\uhd\utils\usrp_n2xx_net_burner_gui.py" "" "" "" SW_SHOWMINIMIZED + CreateShortcut "$SMPROGRAMS\$STARTMENU_FOLDER\UHD Images Downloader.lnk" "$INSTDIR\lib\uhd\utils\uhd_images_downloader.py" + + ;Read a value from an InstallOptions INI file + !insertmacro MUI_INSTALLOPTIONS_READ $DO_NOT_ADD_TO_PATH "NSIS.InstallOptions.ini" "Field 2" "State" + !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_ALL_USERS "NSIS.InstallOptions.ini" "Field 3" "State" + !insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_CURRENT_USER "NSIS.InstallOptions.ini" "Field 4" "State" + + ; Write special uninstall registry entries + Push "StartMenu" + Push "$STARTMENU_FOLDER" + Call ConditionalAddToRegisty + Push "DoNotAddToPath" + Push "$DO_NOT_ADD_TO_PATH" + Call ConditionalAddToRegisty + Push "AddToPathAllUsers" + Push "$ADD_TO_PATH_ALL_USERS" + Call ConditionalAddToRegisty + Push "AddToPathCurrentUser" + Push "$ADD_TO_PATH_CURRENT_USER" + Call ConditionalAddToRegisty + Push "InstallToDesktop" + Push "$INSTALL_DESKTOP" + Call ConditionalAddToRegisty + + !insertmacro MUI_STARTMENU_WRITE_END + +@CPACK_NSIS_EXTRA_INSTALL_COMMANDS@ + +SectionEnd + +Section "-Add to path" + Push $INSTDIR\bin + StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath + StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0 + Call AddToPath + doNotAddToPath: +SectionEnd + +;-------------------------------- +; Create custom pages +Function InstallOptionsPage + !insertmacro MUI_HEADER_TEXT "Install Options" "Choose options for installing the USRP Hardware Driver (UHD)" + !insertmacro MUI_INSTALLOPTIONS_DISPLAY "NSIS.InstallOptions.ini" + +FunctionEnd + +;-------------------------------- +; determine admin versus local install +Function un.onInit + + ClearErrors + UserInfo::GetName + IfErrors noLM + Pop $0 + UserInfo::GetAccountType + Pop $1 + StrCmp $1 "Admin" 0 +3 + SetShellVarContext all + ;MessageBox MB_OK 'User "$0" is in the Admin group' + Goto done + StrCmp $1 "Power" 0 +3 + SetShellVarContext all + ;MessageBox MB_OK 'User "$0" is in the Power Users group' + Goto done + + noLM: + ;Get installation folder from registry if available + + done: + +FunctionEnd + +;--- Add/Remove callback functions: --- +!macro SectionList MacroName + ;This macro used to perform operation on multiple sections. + ;List all of your components in following manner here. +@CPACK_NSIS_COMPONENT_SECTION_LIST@ +!macroend + +Section -FinishComponents + ;Removes unselected components and writes component status to registry + !insertmacro SectionList "FinishSection" + +!ifdef CPACK_NSIS_ADD_REMOVE + ; Get the name of the installer executable + System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1' + StrCpy $R3 $R0 + + ; Strip off the last 13 characters, to see if we have AddRemove.exe + StrLen $R1 $R0 + IntOp $R1 $R0 - 13 + StrCpy $R2 $R0 13 $R1 + StrCmp $R2 "AddRemove.exe" addremove_installed + + ; We're not running AddRemove.exe, so install it + CopyFiles $R3 $INSTDIR\AddRemove.exe + + addremove_installed: +!endif +SectionEnd +;--- End of Add/Remove callback functions --- + +;-------------------------------- +; Component dependencies +Function .onSelChange + !insertmacro SectionList MaybeSelectionChanged +FunctionEnd + +;-------------------------------- +;Uninstaller Section + +Section "Uninstall" + ReadRegStr $START_MENU SHCTX \ + "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "StartMenu" + ;MessageBox MB_OK "Start menu is in: $START_MENU" + ReadRegStr $DO_NOT_ADD_TO_PATH SHCTX \ + "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "DoNotAddToPath" + ReadRegStr $ADD_TO_PATH_ALL_USERS SHCTX \ + "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathAllUsers" + ReadRegStr $ADD_TO_PATH_CURRENT_USER SHCTX \ + "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "AddToPathCurrentUser" + ;MessageBox MB_OK "Add to path: $DO_NOT_ADD_TO_PATH all users: $ADD_TO_PATH_ALL_USERS" + ReadRegStr $INSTALL_DESKTOP SHCTX \ + "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" "InstallToDesktop" + ;MessageBox MB_OK "Install to desktop: $INSTALL_DESKTOP " + +@CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS@ + + ;Remove files we installed. + ;Keep the list of directories here in sync with the File commands above. +@CPACK_NSIS_DELETE_FILES@ +@CPACK_NSIS_DELETE_DIRECTORIES@ + +!ifdef CPACK_NSIS_ADD_REMOVE + ;Remove the add/remove program + Delete "$INSTDIR\AddRemove.exe" +!endif + + ;Remove the uninstaller itself. + Delete "$INSTDIR\Uninstall.exe" + DeleteRegKey SHCTX "Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" + + ;Remove the installation directory if it is empty. + RMDir "$INSTDIR" + + ; Remove the registry entries. + DeleteRegKey SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" + + ; Removes all optional components + !insertmacro SectionList "RemoveSection" + + !insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP + + Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk" +@CPACK_NSIS_DELETE_ICONS@ +@CPACK_NSIS_DELETE_ICONS_EXTRA@ + + ;Delete empty start menu parent diretories + StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" + + startMenuDeleteLoop: + ClearErrors + RMDir $MUI_TEMP + GetFullPathName $MUI_TEMP "$MUI_TEMP\.." + + IfErrors startMenuDeleteLoopDone + + StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop + startMenuDeleteLoopDone: + + ; If the user changed the shortcut, then untinstall may not work. This should + ; try to fix it. + StrCpy $MUI_TEMP "$START_MENU" + Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk" + Delete "$SMPROGRAMS\$MUI_TEMP\USRP2 Card Burner.lnk" + Delete "$SMPROGRAMS\$MUI_TEMP\USRP-N2XX Net Burner.lnk" + Delete "$SMPROGRAMS\$MUI_TEMP\UHD Images Downloader.lnk" +@CPACK_NSIS_DELETE_ICONS_EXTRA@ + + ;Delete empty start menu parent diretories + StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP" + + secondStartMenuDeleteLoop: + ClearErrors + RMDir $MUI_TEMP + GetFullPathName $MUI_TEMP "$MUI_TEMP\.." + + IfErrors secondStartMenuDeleteLoopDone + + StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone secondStartMenuDeleteLoop + secondStartMenuDeleteLoopDone: + + DeleteRegKey /ifempty SHCTX "Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" + + Push $INSTDIR\bin + StrCmp $DO_NOT_ADD_TO_PATH_ "1" doNotRemoveFromPath 0 + Call un.RemoveFromPath + doNotRemoveFromPath: +SectionEnd + +;-------------------------------- +; determine admin versus local install +; Is install for "AllUsers" or "JustMe"? +; Default to "JustMe" - set to "AllUsers" if admin or on Win9x +; This function is used for the very first "custom page" of the installer. +; This custom page does not show up visibly, but it executes prior to the +; first visible page and sets up $INSTDIR properly... +; Choose different default installation folder based on SV_ALLUSERS... +; "Program Files" for AllUsers, "My Documents" for JustMe... + +Function .onInit + ; Reads components status for registry + !insertmacro SectionList "InitSection" + + ; check to see if /D has been used to change + ; the install directory by comparing it to the + ; install directory that is expected to be the + ; default + StrCpy $IS_DEFAULT_INSTALLDIR 0 + StrCmp "$INSTDIR" "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2 + StrCpy $IS_DEFAULT_INSTALLDIR 1 + + StrCpy $SV_ALLUSERS "JustMe" + ; if default install dir then change the default + ; if it is installed for JustMe + StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2 + StrCpy $INSTDIR "$DOCUMENTS\@CPACK_PACKAGE_INSTALL_DIRECTORY@" + + ClearErrors + UserInfo::GetName + IfErrors noLM + Pop $0 + UserInfo::GetAccountType + Pop $1 + StrCmp $1 "Admin" 0 +3 + SetShellVarContext all + ;MessageBox MB_OK 'User "$0" is in the Admin group' + StrCpy $SV_ALLUSERS "AllUsers" + Goto done + StrCmp $1 "Power" 0 +3 + SetShellVarContext all + ;MessageBox MB_OK 'User "$0" is in the Power Users group' + StrCpy $SV_ALLUSERS "AllUsers" + Goto done + + noLM: + StrCpy $SV_ALLUSERS "AllUsers" + ;Get installation folder from registry if available + + done: + StrCmp $SV_ALLUSERS "AllUsers" 0 +3 + StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2 + StrCpy $INSTDIR "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" + + StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 noOptionsPage + !insertmacro MUI_INSTALLOPTIONS_EXTRACT "NSIS.InstallOptions.ini" + + noOptionsPage: +FunctionEnd diff --git a/host/cmake/Modules/UHDPackage.cmake b/host/cmake/Modules/UHDPackage.cmake index a535241a7..ae11c5042 100644 --- a/host/cmake/Modules/UHDPackage.cmake +++ b/host/cmake/Modules/UHDPackage.cmake @@ -109,7 +109,6 @@ SET(CPACK_COMPONENT_LIBRARIES_GROUP "Development") SET(CPACK_COMPONENT_HEADERS_GROUP "Development") SET(CPACK_COMPONENT_UTILITIES_GROUP "Runtime") SET(CPACK_COMPONENT_EXAMPLES_GROUP "Runtime") -SET(CPACK_COMPONENT_TESTS_GROUP "Runtime") SET(CPACK_COMPONENT_MANUAL_GROUP "Documentation") SET(CPACK_COMPONENT_DOXYGEN_GROUP "Documentation") SET(CPACK_COMPONENT_README_GROUP "Documentation") @@ -118,7 +117,6 @@ SET(CPACK_COMPONENT_LIBRARIES_DISPLAY_NAME "Libraries") SET(CPACK_COMPONENT_HEADERS_DISPLAY_NAME "C++ Headers") SET(CPACK_COMPONENT_UTILITIES_DISPLAY_NAME "Utilities") SET(CPACK_COMPONENT_EXAMPLES_DISPLAY_NAME "Examples") -SET(CPACK_COMPONENT_TESTS_DISPLAY_NAME "Unit Tests") SET(CPACK_COMPONENT_MANUAL_DISPLAY_NAME "Manual") SET(CPACK_COMPONENT_DOXYGEN_DISPLAY_NAME "Doxygen") SET(CPACK_COMPONENT_README_DISPLAY_NAME "Readme") @@ -128,7 +126,6 @@ SET(CPACK_COMPONENT_LIBRARIES_DESCRIPTION "Dynamic link library") SET(CPACK_COMPONENT_HEADERS_DESCRIPTION "C++ development headers") SET(CPACK_COMPONENT_UTILITIES_DESCRIPTION "Utility executables and python scripts") SET(CPACK_COMPONENT_EXAMPLES_DESCRIPTION "Example executables") -SET(CPACK_COMPONENT_TESTS_DESCRIPTION "Unit test executables") SET(CPACK_COMPONENT_MANUAL_DESCRIPTION "Manual/application notes (rst and html)") SET(CPACK_COMPONENT_DOXYGEN_DESCRIPTION "API documentation (html)") SET(CPACK_COMPONENT_README_DESCRIPTION "Readme files (txt)") @@ -140,7 +137,7 @@ SET(CPACK_COMPONENT_UTILITIES_DEPENDS libraries) SET(CPACK_COMPONENT_EXAMPLES_DEPENDS libraries) SET(CPACK_COMPONENT_TESTS_DEPENDS libraries) -SET(CPACK_COMPONENTS_ALL libraries headers utilities examples tests manual doxygen readme images) +SET(CPACK_COMPONENTS_ALL libraries headers utilities examples manual doxygen readme images) ######################################################################## # Setup CPack Debian @@ -179,11 +176,11 @@ SET(CPACK_NSIS_MODIFY_PATH ON) SET(HLKM_ENV "\\\"SYSTEM\\\\CurrentControlSet\\\\Control\\\\Session Manager\\\\Environment\\\"") SET(CPACK_NSIS_EXTRA_INSTALL_COMMANDS " - WriteRegStr HKLM ${HLKM_ENV} \\\"UHD_PKG_DATA_PATH\\\" \\\"$INSTDIR\\\\share\\\\uhd\\\" + WriteRegStr HKLM ${HLKM_ENV} \\\"UHD_PKG_PATH\\\" \\\"$INSTDIR\\\" ") SET(CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS " - DeleteRegValue HKLM ${HLKM_ENV} \\\"UHD_PKG_DATA_PATH\\\" + DeleteRegValue HKLM ${HLKM_ENV} \\\"UHD_PKG_PATH\\\" ") ######################################################################## diff --git a/host/cmake/Modules/UHDUnitTest.cmake b/host/cmake/Modules/UHDUnitTest.cmake new file mode 100644 index 000000000..47cddc521 --- /dev/null +++ b/host/cmake/Modules/UHDUnitTest.cmake @@ -0,0 +1,110 @@ +# +# Copyright 2010-2012 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +######################################################################## +# Add a unit test and setup the environment for a unit test. +# Takes the same arguments as the ADD_TEST function. +# +# Before calling set the following variables: +# UHD_TEST_TARGET_DEPS - built targets for the library path +# UHD_TEST_LIBRARY_DIRS - directories for the library path +######################################################################## +function(UHD_ADD_TEST test_name) + + #Ensure that the build exe also appears in the PATH. + list(APPEND UHD_TEST_TARGET_DEPS ${ARGN}) + + #In the land of windows, all libraries must be in the PATH. + #Since the dependent libraries are not yet installed, + #we must manually set them in the PATH to run tests. + #The following appends the path of a target dependency. + foreach(target ${UHD_TEST_TARGET_DEPS}) + get_target_property(location ${target} LOCATION) + if(location) + get_filename_component(path ${location} PATH) + string(REGEX REPLACE "\\$\\(.*\\)" ${CMAKE_BUILD_TYPE} path ${path}) + list(APPEND UHD_TEST_LIBRARY_DIRS ${path}) + endif(location) + endforeach(target) + + file(TO_NATIVE_PATH ${CMAKE_CURRENT_SOURCE_DIR} srcdir) + file(TO_NATIVE_PATH "${UHD_TEST_LIBRARY_DIRS}" libpath) #ok to use on dir list? + + #http://www.cmake.org/pipermail/cmake/2009-May/029464.html + #Replaced this add test + set environs code with the shell script generation. + #Its nicer to be able to manually run the shell script to diagnose problems. + #ADD_TEST(${ARGV}) + #SET_TESTS_PROPERTIES(${test_name} PROPERTIES ENVIRONMENT "${environs}") + + if(UNIX) + set(LD_PATH_VAR "LD_LIBRARY_PATH") + if(APPLE) + set(LD_PATH_VAR "DYLD_LIBRARY_PATH") + endif() + + set(binpath "${CMAKE_CURRENT_BINARY_DIR}:$PATH") + list(APPEND libpath "$${LD_PATH_VAR}") + + #replace list separator with the path separator + string(REPLACE ";" ":" libpath "${libpath}") + list(APPEND environs "PATH=${binpath}" "${LD_PATH_VAR}=${libpath}") + + #generate a bat file that sets the environment and runs the test + find_program(SHELL sh) + set(sh_file ${CMAKE_CURRENT_BINARY_DIR}/${test_name}_test.sh) + file(WRITE ${sh_file} "#!${SHELL}\n") + #each line sets an environment variable + foreach(environ ${environs}) + file(APPEND ${sh_file} "export ${environ}\n") + endforeach(environ) + #load the command to run with its arguments + foreach(arg ${ARGN}) + file(APPEND ${sh_file} "${arg} ") + endforeach(arg) + file(APPEND ${sh_file} "\n") + + #make the shell file executable + execute_process(COMMAND chmod +x ${sh_file}) + + add_test(${test_name} ${SHELL} ${sh_file}) + + endif(UNIX) + + if(WIN32) + list(APPEND libpath ${DLL_PATHS} "%PATH%") + + #replace list separator with the path separator (escaped) + string(REPLACE ";" "\\;" libpath "${libpath}") + list(APPEND environs "PATH=${libpath}") + + #generate a bat file that sets the environment and runs the test + set(bat_file ${CMAKE_CURRENT_BINARY_DIR}/${test_name}_test.bat) + file(WRITE ${bat_file} "@echo off\n") + #each line sets an environment variable + foreach(environ ${environs}) + file(APPEND ${bat_file} "SET ${environ}\n") + endforeach(environ) + #load the command to run with its arguments + foreach(arg ${ARGN}) + file(APPEND ${bat_file} "${arg} ") + endforeach(arg) + file(APPEND ${bat_file} "\n") + + add_test(${test_name} ${bat_file}) + endif(WIN32) + +endfunction(UHD_ADD_TEST) diff --git a/host/cmake/debian/postinst.in b/host/cmake/debian/postinst.in index eaca15394..bc27c46f0 100755 --- a/host/cmake/debian/postinst.in +++ b/host/cmake/debian/postinst.in @@ -1,6 +1,6 @@ #!/bin/sh # -# Copyright 2011 Ettus Research LLC +# Copyright 2011,2013 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,7 +17,7 @@ # if [ "$1" = "configure" ]; then - cp @CMAKE_INSTALL_PREFIX@/share/uhd/utils/uhd-usrp.rules /etc/udev/rules.d/uhd-usrp.rules + cp @CMAKE_INSTALL_PREFIX@/lib/uhd/utils/uhd-usrp.rules /etc/udev/rules.d/uhd-usrp.rules udevadm control --reload-rules ldconfig fi diff --git a/host/cmake/redhat/post_install.in b/host/cmake/redhat/post_install.in index 01fd3338f..25864e0ec 100755 --- a/host/cmake/redhat/post_install.in +++ b/host/cmake/redhat/post_install.in @@ -1,6 +1,6 @@ #!/bin/sh # -# Copyright 2011 Ettus Research LLC +# Copyright 2011,2013 Ettus Research LLC # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,6 +16,6 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -cp @CMAKE_INSTALL_PREFIX@/share/uhd/utils/uhd-usrp.rules /etc/udev/rules.d/uhd-usrp.rules +cp @CMAKE_INSTALL_PREFIX@/lib/uhd/utils/uhd-usrp.rules /etc/udev/rules.d/uhd-usrp.rules udevadm control --reload-rules ldconfig |