diff options
Diffstat (limited to 'fpga')
55 files changed, 2565 insertions, 1074 deletions
diff --git a/fpga/README b/fpga/README deleted file mode 100644 index aacafecfd..000000000 --- a/fpga/README +++ /dev/null @@ -1,4 +0,0 @@ -This is a placeholder for the fpga code (verilog, makefiles, corgens...) - -The layout should have a common library and various top level builds -and testbenches that are organized hierarchically. diff --git a/fpga/README.txt b/fpga/README.txt new file mode 100644 index 000000000..29e891f6d --- /dev/null +++ b/fpga/README.txt @@ -0,0 +1,78 @@ +######################################################################## +## Welcome to the USRP FPGA source code tree +######################################################################## + +usrp1/ + + Description: generation 1 products + + Devices: USRP classic only + + Tools: Quartus from Altera + + Project file: usrp1/toplevel/usrp_std/ + +usrp2/ + + Description: generation 2 products + + Devices: USRP2, N2XX, B100, E1XX + + Tools: ISE from Xilinx, GNU make + + Build Instructions: + 1) ensure that xtclsh is in the $PATH + 2) cd usrp2/top/<project-directory> + 3) make -f Makefile.<device> bin + 4) bin file in build-<device>/*.bin + +######################################################################## +## Customizing the DSP +######################################################################## + +As part of the USRP FPGA build-framework, +there are several convenient places for users to insert +custom DSP modules into the transmit and receive chains. + +* before the DDC module +* after the DDC module +* replace the DDC module +* before the DUC module +* after the DUC module +* replace of the DUC module +* as an RX packet engine +* as an TX packet engine + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Customizing the top level makefile +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Each USRP device has a makefile associated with it. +This makefile contains all of the necessary build rules. +When making a customized FPGA design, +start by copying the current makefile for your device. +Makefiles can be found in the usrp2/top/<dir>/Makefile.* + +Edit your new makefile: +* set BUILD_DIR to a unique directory name +* set CUSTOM_SRCS for your verilog sources +* set CUSTOM_DEFS (see section below) + +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Inserting custom modules +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +CUSTOM_DEFS is a string of space-separate key-value pairs. +Set the CUSTOM_DEFS variable so the FPGA fabric glue +will substitute your custom modules into the DSP chain. + +Example: +CUSTOM_DEFS = "TX_ENG0_MODULE=my_tx_engine RX_ENG0_MODULE=my_rx_engine" +Where my_tx_engine and my_rx_engine are the names of custom verilog modules. + +The following module definition keys are possible (X is a DSP number): + +* TX_ENG<X>_MODULE: set the module for the transmit chain engine. +* RX_ENG<X>_MODULE: set the module for the receive chain engine. +* RX_DSP<X>_MODULE: set the module for the transmit dsp chain. +* TX_DSP<X>_MODULE: set the module for the receive dsp chain. + +Examples of custom modules can be found in usrp2/custom/*.v diff --git a/fpga/usrp2/control_lib/Makefile.srcs b/fpga/usrp2/control_lib/Makefile.srcs index 567feacde..6ee7ea262 100644 --- a/fpga/usrp2/control_lib/Makefile.srcs +++ b/fpga/usrp2/control_lib/Makefile.srcs @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # ################################################## @@ -54,4 +54,5 @@ settings_bus_16LE.v \ atr_controller16.v \ fifo_to_wb.v \ gpio_atr.v \ +user_settings.v \ )) diff --git a/fpga/usrp2/control_lib/double_buffer_tb.v b/fpga/usrp2/control_lib/double_buffer_tb.v index a9aae6956..804e8804d 100644 --- a/fpga/usrp2/control_lib/double_buffer_tb.v +++ b/fpga/usrp2/control_lib/double_buffer_tb.v @@ -27,7 +27,7 @@ module double_buffer_tb(); reg src_rdy_i = 0; wire dst_rdy_o; - wire dst_rdy_i = 1; + wire dst_rdy_i = 0; wire [35:0] data_o; reg [35:0] data_i; @@ -46,9 +46,9 @@ module double_buffer_tb(); .data_i(data_i), .src_rdy_i(src_rdy_i), .dst_rdy_o(dst_rdy_o), .data_o(data_o), .src_rdy_o(src_rdy_o), .dst_rdy_i(dst_rdy_i)); - dspengine_16to8 dspengine_16to8 + dspengine_8to16 #(.HEADER_OFFSET(1)) dspengine_8to16 (.clk(clk),.reset(rst),.clear(0), - .set_stb(set_stb), .set_addr(0), .set_data({13'h0,1'b1,18'h00400}), + .set_stb(set_stb), .set_addr(0), .set_data(1), .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), .access_dat_i(buf_to_dsp), .access_dat_o(dsp_to_buf)); @@ -69,11 +69,13 @@ module double_buffer_tb(); @(posedge clk); @(posedge clk); @(posedge clk); - +/* // Passthrough $display("Passthrough"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'hFFFFFFFF}; + data_i <= { 2'b00,1'b0,1'b1,32'h01234567}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'hFFFFFFFF}; @(posedge clk); data_i <= { 2'b00,1'b0,1'b0,32'h04050607}; @(posedge clk); @@ -86,16 +88,18 @@ module double_buffer_tb(); repeat (5) @(posedge clk); - +*/ $display("Enabled"); set_stb <= 1; @(posedge clk); set_stb <= 0; - +/* @(posedge clk); $display("Non-IF Data Passthrough"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'hC0000000}; + data_i <= { 2'b00,1'b0,1'b1,32'h89acdef0}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'hC0000000}; @(posedge clk); data_i <= { 2'b00,1'b0,1'b0,32'h14151617}; @(posedge clk); @@ -111,7 +115,9 @@ module double_buffer_tb(); $display("No StreamID, No Trailer, Even"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'h0000FFFF}; + data_i <= { 2'b00,1'b0,1'b1,32'hAAAAAAAA}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h0000FFFF}; @(posedge clk); data_i <= { 2'b00,1'b0,1'b0,32'h01000200}; @(posedge clk); @@ -139,7 +145,9 @@ module double_buffer_tb(); $display("No StreamID, No Trailer, Odd"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'h0000FFFF}; + data_i <= { 2'b00,1'b0,1'b1,32'hBBBBBBBB}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h0000FFFF}; @(posedge clk); data_i <= { 2'b00,1'b0,1'b0,32'h11001200}; @(posedge clk); @@ -159,30 +167,59 @@ module double_buffer_tb(); while(~dst_rdy_o) @(posedge clk); - +*/ + /* $display("No StreamID, Trailer, Even"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'h0400FFFF}; + data_i <= { 2'b00,1'b0,1'b1,32'hCCCCCCCC}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'h21002200}; + data_i <= { 2'b00,1'b0,1'b0,32'h0400FFFF}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'h23002400}; + data_i <= { 2'b00,1'b0,1'b0,32'h21222324}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h25262728}; src_rdy_i <= 0; @(posedge clk); src_rdy_i <= 1; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'h25002600}; + data_i <= { 2'b00,1'b0,1'b0,32'h292a2b2c}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'h27002800}; + data_i <= { 2'b00,1'b0,1'b0,32'h2d2e2f30}; @(posedge clk); - data_i <= { 2'b00,1'b1,1'b0,32'h29002a00}; + data_i <= { 2'b00,1'b1,1'b0,32'hDEADBEEF}; @(posedge clk); src_rdy_i <= 0; @(posedge clk); - +*/ + while(~dst_rdy_o) + @(posedge clk); +/* + $display("No StreamID, Trailer, Odd"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'hDDDDDDDD}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h0400FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h21222324}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h25262728}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h292a2b2c}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h2d2e2f30}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'hDEBDBF0D}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); +*/ while(~dst_rdy_o) @(posedge clk); +/* $display("No StreamID, Trailer, Odd"); src_rdy_i <= 1; data_i <= { 2'b00,1'b0,1'b1,32'h0400FFFF}; @@ -226,23 +263,45 @@ module double_buffer_tb(); while(~dst_rdy_o) @(posedge clk); - +*/ $display("StreamID, Trailer, Odd"); src_rdy_i <= 1; - data_i <= { 2'b00,1'b0,1'b1,32'h1400FFFF}; + data_i <= { 2'b00,1'b0,1'b1,32'hABCDEF98}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h1c034567}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha0a1a2a3}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha4a5a6a7}; +// src_rdy_i <= 0; +// @(posedge clk); +// src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha8a9aaab}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'ha100a200}; + data_i <= { 2'b00,1'b0,1'b0,32'hacadaeaf}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'hdeadbeef}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'ha300a400}; src_rdy_i <= 0; @(posedge clk); src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'hABCDEF98}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h1c034567}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha0a1a2a3}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha4a5a6a7}; +// src_rdy_i <= 0; +// @(posedge clk); +// src_rdy_i <= 1; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'ha500a600}; + data_i <= { 2'b00,1'b0,1'b0,32'ha8a9aaab}; @(posedge clk); - data_i <= { 2'b00,1'b0,1'b0,32'ha700a800}; + data_i <= { 2'b00,1'b0,1'b0,32'hacadaeaf}; @(posedge clk); - data_i <= { 2'b00,1'b1,1'b0,32'hbbb0bbb0}; + data_i <= { 2'b00,1'b1,1'b0,32'hdeadbeef}; @(posedge clk); src_rdy_i <= 0; @(posedge clk); diff --git a/fpga/usrp2/control_lib/user_settings.v b/fpga/usrp2/control_lib/user_settings.v new file mode 100644 index 000000000..d87f1de21 --- /dev/null +++ b/fpga/usrp2/control_lib/user_settings.v @@ -0,0 +1,63 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// User settings bus +// +// Provides 8-bit address, 32-bit data write only bus for user settings, consumes to addresses in +// normal settings bus. +// +// Write user address to BASE +// Write user data to BASE+1 +// +// The user_set_stb will strobe after data write, must write new address even if same as previous one. + +module user_settings + #(parameter BASE=0) + (input clk, + input rst, + + input set_stb, + input [7:0] set_addr, + input [31:0] set_data, + + output set_stb_user, + output [7:0] set_addr_user, + output [31:0] set_data_user + ); + + wire addr_changed, data_changed; + reg stb_int; + + setting_reg #(.my_addr(BASE+0),.width(8)) sr_0 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(set_addr_user),.changed(addr_changed) ); + + setting_reg #(.my_addr(BASE+1)) sr_1 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(set_data_user),.changed(data_changed) ); + + always @(posedge clk) + if (rst|set_stb_user) + stb_int <= 0; + else + if (addr_changed) + stb_int <= 1; + + assign set_stb_user = stb_int & data_changed; + +endmodule // user_settings + diff --git a/fpga/usrp2/custom/custom_dsp_rx.v b/fpga/usrp2/custom/custom_dsp_rx.v new file mode 100644 index 000000000..355adf008 --- /dev/null +++ b/fpga/usrp2/custom/custom_dsp_rx.v @@ -0,0 +1,71 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//COPY ME, CUSTOMIZE ME... + +//The following module effects the IO of the DDC chain. +//By default, this entire module is a simple pass-through. + +//To implement DSP logic before the DDC: +//Implement custom DSP between frontend and ddc input. + +//To implement DSP logic after the DDC: +//Implement custom DSP between ddc output and baseband. + +//To bypass the DDC with custom logic: +//Implement custom DSP between frontend and baseband. + +module custom_dsp_rx +#( + //frontend bus width + parameter WIDTH = 24 +) +( + //control signals + input clock, //dsp clock + input reset, //active high synchronous reset + input clear, //active high on packet control init + input enable, //active high when streaming enabled + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate inputs directly from the RX frontend + input [WIDTH-1:0] frontend_i, + input [WIDTH-1:0] frontend_q, + + //full rate outputs directly to the DDC chain + output [WIDTH-1:0] ddc_in_i, + output [WIDTH-1:0] ddc_in_q, + + //strobed samples {I16,Q16} from the RX DDC chain + input [31:0] ddc_out_sample, + input ddc_out_strobe, //high on valid sample + output ddc_out_enable, //enables DDC module + + //strobbed baseband samples {I16,Q16} from this module + output [31:0] bb_sample, + output bb_strobe //high on valid sample +); + + assign ddc_in_i = frontend_i; + assign ddc_in_q = frontend_q; + assign bb_sample = ddc_out_sample; + assign bb_strobe = ddc_out_strobe; + assign ddc_out_enable = enable; + +endmodule //custom_dsp_rx diff --git a/fpga/usrp2/custom/custom_dsp_tx.v b/fpga/usrp2/custom/custom_dsp_tx.v new file mode 100644 index 000000000..0848a187f --- /dev/null +++ b/fpga/usrp2/custom/custom_dsp_tx.v @@ -0,0 +1,71 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//COPY ME, CUSTOMIZE ME... + +//The following module effects the IO of the DUC chain. +//By default, this entire module is a simple pass-through. + +//To implement DSP logic before the DUC: +//Implement custom DSP between baseband and duc input. + +//To implement DSP logic after the DUC: +//Implement custom DSP between duc output and frontend. + +//To bypass the DUC with custom logic: +//Implement custom DSP between baseband and frontend. + +module custom_dsp_tx +#( + //frontend bus width + parameter WIDTH = 24 +) +( + //control signals + input clock, //dsp clock + input reset, //active high synchronous reset + input clear, //active high on packet control init + input enable, //active high when streaming enabled + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate outputs directly to the TX frontend + output [WIDTH-1:0] frontend_i, + output [WIDTH-1:0] frontend_q, + + //full rate outputs directly from the DUC chain + input [WIDTH-1:0] duc_out_i, + input [WIDTH-1:0] duc_out_q, + + //strobed samples {I16,Q16} to the TX DUC chain + output [31:0] duc_in_sample, + input duc_in_strobe, //this is a backpressure signal + output duc_in_enable, //enables DUC module + + //strobbed baseband samples {I16,Q16} to this module + input [31:0] bb_sample, + output bb_strobe //this is a backpressure signal +); + + assign frontend_i = duc_out_i; + assign frontend_q = duc_out_q; + assign duc_in_sample = bb_sample; + assign bb_strobe = duc_in_strobe; + assign duc_in_enable = enable; + +endmodule //custom_dsp_tx diff --git a/fpga/usrp2/custom/custom_engine_rx.v b/fpga/usrp2/custom/custom_engine_rx.v new file mode 100644 index 000000000..dfeaad2cd --- /dev/null +++ b/fpga/usrp2/custom/custom_engine_rx.v @@ -0,0 +1,53 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//COPY ME, CUSTOMIZE ME... + +//The following module is used to re-write receive packets to the host. +//This module provides a packet-based ram interface for manipulating packets. +//The user writes a custom engine (state machine) to read the input packet, +//and to produce a new output packet. + +//By default, this entire module is a simple pass-through. + +module custom_engine_rx +#( + //buffer size for ram interface engine + parameter BUF_SIZE = 10 +) +( + //control signals + input clock, input reset, input clear, + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //ram interface for engine + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i +); + + assign access_done = access_ok; + +endmodule //custom_engine_rx diff --git a/fpga/usrp2/custom/custom_engine_tx.v b/fpga/usrp2/custom/custom_engine_tx.v new file mode 100644 index 000000000..9be728484 --- /dev/null +++ b/fpga/usrp2/custom/custom_engine_tx.v @@ -0,0 +1,57 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//COPY ME, CUSTOMIZE ME... + +//The following module is used to re-write transmit packets from the host. +//This module provides a packet-based ram interface for manipulating packets. +//The user writes a custom engine (state machine) to read the input packet, +//and to produce a new output packet. + +//By default, this entire module is a simple pass-through. + +module custom_engine_tx +#( + //buffer size for ram interface engine + parameter BUF_SIZE = 10, + + //the number of 32bit lines between start of buffer and vita header + //the metadata before the header should be preserved by the engine + parameter HEADER_OFFSET = 0 +) +( + //control signals + input clock, input reset, input clear, + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //ram interface for engine + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i +); + + assign access_done = access_ok; + +endmodule //custom_engine_tx diff --git a/fpga/usrp2/custom/power_trig.v b/fpga/usrp2/custom/power_trig.v new file mode 100644 index 000000000..b38059030 --- /dev/null +++ b/fpga/usrp2/custom/power_trig.v @@ -0,0 +1,130 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// This a power trigger module implemented on top of the custom dsp template. +// Power triggering is implemented after the existing DDC chain. +// Triggering is controlled via user settings registers. + +// Register 0: +// threshold for power trigger +// 32 bit unsigned fixed-point number of some arbitrary scaling + +module power_trig +#( + //frontend bus width + parameter WIDTH = 24, + parameter BASE = 0 +) +( + //control signals + input clock, //dsp clock + input reset, //active high synchronous reset + input clear, //active high on packet control init + input enable, //active high when streaming enabled + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate inputs directly from the RX frontend + input [WIDTH-1:0] frontend_i, + input [WIDTH-1:0] frontend_q, + + //full rate outputs directly to the DDC chain + output [WIDTH-1:0] ddc_in_i, + output [WIDTH-1:0] ddc_in_q, + + //strobed samples {I16,Q16} from the RX DDC chain + input [31:0] ddc_out_sample, + input ddc_out_strobe, //high on valid sample + output ddc_out_enable, //enables DDC module + + //strobbed baseband samples {I16,Q16} from this module + output [31:0] bb_sample, + output bb_strobe //high on valid sample +); + + //leave frontend tied to existing ddc chain + assign ddc_in_i = frontend_i; + assign ddc_in_q = frontend_q; + + //ddc enable remains tied to global enable + assign ddc_out_enable = enable; + + //below we implement a power trigger between baseband samples and ddc output... + + reg [8:0] wr_addr; + wire [8:0] rd_addr; + reg triggered, triggerable; + wire trigger; + + wire [31:0] delayed_sample; + wire [31:0] thresh; + + setting_reg #(.my_addr(BASE+0)) sr_0 + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(thresh),.changed()); + + assign rd_addr = wr_addr + 1; // FIXME adjustable delay + + ram_2port #(.DWIDTH(32),.AWIDTH(9)) delay_line + (.clka(clk),.ena(1),.wea(ddc_out_strobe),.addra(wr_addr),.dia(ddc_out_sample),.doa(), + .clkb(clk),.enb(ddc_out_strobe),.web(1'b0),.addrb(rd_addr),.dib(32'hFFFF),.dob(delayed_sample)); + + always @(posedge clock) + if(reset | ~enable) + wr_addr <= 0; + else + if(ddc_out_strobe) + wr_addr <= wr_addr + 1; + + always @(posedge clock) + if(reset | ~enable) + triggerable <= 0; + else if(wr_addr == 9'h1FF) // Wait till we're nearly full + triggerable <= 1; + + + reg stb_d1, stb_d2; + always @(posedge clock) stb_d1 <= ddc_out_strobe; + always @(posedge clock) stb_d2 <= stb_d1; + + assign bb_sample = delayed_sample; + assign bb_strobe = stb_d1 & triggered; + + // Compute Mag + wire [17:0] mult_in = stb_d1 ? { ddc_out_sample[15],ddc_out_sample[15:0], 1'b0 } : + { ddc_out_sample[31], ddc_out_sample[31:16], 1'b0 }; + wire [35:0] prod; + reg [31:0] sum; + + MULT18X18S mult (.P(prod), .A(mult_in), .B(mult_in), .C(clock), .CE(ddc_out_strobe | stb_d1), .R(reset) ); + + always @(posedge clock) + if(stb_d1) + sum <= prod[35:4]; + else if(stb_d2) + sum <= sum + prod[35:4]; + + always @(posedge clock) + if(reset | ~enable | ~triggerable) + triggered <= 0; + else if(trigger) + triggered <= 1; + + assign trigger = (sum > thresh); + +endmodule // power_trig diff --git a/fpga/usrp2/custom/power_trig_tb.v b/fpga/usrp2/custom/power_trig_tb.v new file mode 100644 index 000000000..b8f3385ce --- /dev/null +++ b/fpga/usrp2/custom/power_trig_tb.v @@ -0,0 +1,71 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + +module power_trig_tb(); + initial $dumpfile("power_trig_tb.vcd"); + initial $dumpvars(0,power_trig_tb); + + reg clk = 0; + always #10 clk <= ~clk; + reg rst = 1; + initial #100 rst <= 0; + + initial + begin + set_stb <= 0; + #1000; + set_stb <= 1; + end + + reg [31:0] sample_in; + reg strobe_in; + wire [31:0] sample_out; + wire strobe_out; + reg set_stb, run; + + power_trig #(.BASE(0)) power_trig + (.clk(clk), .reset(rst), .enable(1), + .set_stb(set_stb), .set_addr(0), .set_data(32'h000B_B000), + .run(run), + + .ddc_out_sample(sample_in), .ddc_out_strobe(strobe_in), + .bb_sample(sample_out), .bb_strobe(strobe_out)); + + initial sample_in <= 32'h0100_0300; + + always @(posedge clk) + if(~strobe_in) + sample_in <= sample_in + 32'h0001_0001; + + initial + #100000 $finish; + + initial + begin + run <= 0; + #2000 run <= 1; + #30000 run <= 0; + end + + always @(posedge clk) + if(rst | ~run) + strobe_in <= 0; + else + strobe_in <= ~strobe_in; + +endmodule // power_trig_tb diff --git a/fpga/usrp2/gpif/Makefile.srcs b/fpga/usrp2/gpif/Makefile.srcs index bf2b7f74d..06cde8afa 100644 --- a/fpga/usrp2/gpif/Makefile.srcs +++ b/fpga/usrp2/gpif/Makefile.srcs @@ -11,4 +11,5 @@ gpif_wr.v \ gpif_rd.v \ packet_reframer.v \ packet_splitter.v \ +slave_fifo.v \ )) diff --git a/fpga/usrp2/gpif/packet_reframer.v b/fpga/usrp2/gpif/packet_reframer.v index 923d499ae..8bb8a3678 100644 --- a/fpga/usrp2/gpif/packet_reframer.v +++ b/fpga/usrp2/gpif/packet_reframer.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ // -// Join vita packets longer than one GPIF frame, drop padding on short frames +// Join vita packets longer than one GPIF frame module packet_reframer (input clk, input reset, input clear, @@ -25,18 +25,20 @@ module packet_reframer output dst_rdy_o, output [18:0] data_o, output src_rdy_o, - input dst_rdy_i); + input dst_rdy_i, + output reg state, + output eof_out, + output reg [15:0] length); - reg [1:0] state; - reg [15:0] length; + //reg state; + //reg [15:0] length; localparam RF_IDLE = 0; localparam RF_PKT = 1; - localparam RF_DUMP = 2; always @(posedge clk) if(reset | clear) - state <= 0; + state <= RF_IDLE; else if(src_rdy_i & dst_rdy_i) case(state) @@ -47,26 +49,16 @@ module packet_reframer end RF_PKT : begin - if(length == 2) - if(data_i[17]) - state <= RF_IDLE; - else - state <= RF_DUMP; - else - length <= length - 1; + if(eof_out) state <= RF_IDLE; + length <= length - 1; end - RF_DUMP : - if(data_i[17]) - state <= RF_IDLE; - default : - state<= RF_IDLE; endcase // case (state) assign dst_rdy_o = dst_rdy_i; // this is a little pessimistic but ok - assign src_rdy_o = src_rdy_i & (state != RF_DUMP); + assign src_rdy_o = src_rdy_i; wire occ_out = 0; - wire eof_out = (state == RF_PKT) & (length == 2); + assign eof_out = (state == RF_PKT) & (length == 2); wire sof_out = (state == RF_IDLE); wire [15:0] data_out = data_i[15:0]; assign data_o = {occ_out, eof_out, sof_out, data_out}; diff --git a/fpga/usrp2/gpif/slave_fifo.v b/fpga/usrp2/gpif/slave_fifo.v new file mode 100644 index 000000000..10740942b --- /dev/null +++ b/fpga/usrp2/gpif/slave_fifo.v @@ -0,0 +1,467 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +////////////////////////////////////////////////////////////////////////////////// + +//this is a FIFO master interface for the FX2 in "slave fifo" mode. + +module slave_fifo + #(parameter TXFIFOSIZE = 12, parameter RXFIFOSIZE = 12) + (// GPIF signals + input gpif_clk, input gpif_rst, + inout [15:0] gpif_d, + input [3:0] gpif_ctl, + output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr, + + // Wishbone signals + input wb_clk, input wb_rst, + output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, + output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, + input [7:0] triggers, + + input dsp_rx_run, + + // FIFO interface + input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, + output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, + input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, + input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o, + output tx_underrun, output rx_overrun, + + input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl, + output [31:0] debug0, output [31:0] debug1 + ); + + // inputs to FPGA (all active low) + wire FX2_DE = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) + wire FX2_CE = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) + wire FX2_DF = ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) + wire FX2_CF = ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) + + wire [17:0] gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out; + + // //////////////////////////////////////////////////////////////////// + // GPIF bus master state machine + + //transfer size for GPIF data. this can be anything really, it's specified only for + //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of + //the double buffers in B100/B150. this should probably be a toplevel parameter or even + //a settings register value. + localparam data_transfer_size = 256; + localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up + + // state machine i/o to four fifos + //tx + wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space + wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable + reg data_tx_dst_rdy; //sm input, data tx path has space + wire data_tx_src_rdy; //sm output, data tx path enable + + //rx + wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable + wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space + wire data_rx_dst_rdy; //sm output, data rx path enable + wire data_rx_src_rdy; //sm input, data rx path has space + + reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer + + wire sop, eop; //SOP/EOP markers for TX data packets + + reg pktend_latch; + + reg [3:0] state; //state machine current state + localparam STATE_IDLE = 0; + localparam STATE_DATA_RX = 5; + localparam STATE_DATA_TX = 3; + localparam STATE_CTRL_RX = 6; + localparam STATE_CTRL_TX = 9; + localparam STATE_DATA_TX_SLOE = 2; + localparam STATE_CTRL_TX_SLOE = 8; + localparam STATE_DATA_RX_ADR = 1; + localparam STATE_CTRL_RX_ADR = 4; + localparam STATE_PKTEND = 7; + + //logs the last bus user for xfer fairness + //we only care about data rx vs. tx since ctrl pkts are so short + reg last_data_bus_hog; + localparam BUS_HOG_RX = 0; + localparam BUS_HOG_TX = 1; + + // ////////////////////////////////////////////////////////////// + // FX2 slave FIFO bus master state machine + // + always @(posedge gpif_clk) + if(gpif_rst) + state <= STATE_IDLE; + else + begin + case (state) + STATE_IDLE: + begin + transfer_count <= 0; + //handle transitions to other states + if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data + state <= STATE_CTRL_TX_SLOE; + else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full + state <= STATE_CTRL_RX_ADR; + else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) //if there's room in the data fifo and the FX2 has data + state <= STATE_DATA_TX_SLOE; + else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full + state <= STATE_DATA_RX_ADR; + else if(data_tx_dst_rdy & ~FX2_DE) + state <= STATE_DATA_TX_SLOE; + else if(data_rx_src_rdy & ~FX2_DF) + state <= STATE_DATA_RX_ADR; + else if(~data_rx_src_rdy & ~dsp_rx_run & pktend_latch & ~FX2_DF) + state <= STATE_PKTEND; + + if(data_rx_src_rdy) + pktend_latch <= 1; + end + + STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD + state <= STATE_DATA_TX; + STATE_CTRL_TX_SLOE: + state <= STATE_CTRL_TX; + + STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR + state <= STATE_DATA_RX; + STATE_CTRL_RX_ADR: + state <= STATE_CTRL_RX; + + STATE_DATA_RX: + begin + if((transfer_count == data_transfer_size) | FX2_DF | (~data_rx_src_rdy)) + state <= STATE_IDLE; + + transfer_count <= transfer_count + 1; + last_data_bus_hog <= BUS_HOG_RX; + end + + STATE_PKTEND: + begin + state <= STATE_IDLE; + pktend_latch <= 0; + end + + STATE_DATA_TX: + begin + if((transfer_count == data_transfer_size) | FX2_DE )/*| (~data_tx_dst_rdy))*/ + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + last_data_bus_hog <= BUS_HOG_TX; + end + STATE_CTRL_RX: + begin + if(FX2_CF | (~ctrl_rx_src_rdy)) + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + end + STATE_CTRL_TX: + begin + if(FX2_CE | (~ctrl_tx_dst_rdy)) + state <= STATE_IDLE; + transfer_count <= transfer_count + 1; + end + endcase + end + + // /////////////////////////////////////////////////////////////////// + // fifo signal assignments and enables + + //enable fifos + assign data_rx_dst_rdy = (state == STATE_DATA_RX); + assign data_tx_src_rdy = (state == STATE_DATA_TX); + assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX); + assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX); + + //tx framing (this is super suspect) + //eop should be used only to set the EOP bit going into FIFOs + wire eop_data, eop_ctrl; + assign sop = (transfer_count == 0); + assign eop_data = (transfer_count == (data_transfer_size-1)); + assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1)); + assign eop = (state == STATE_DATA_TX) ? eop_data : eop_ctrl; + + // //////////////////////////////////////////////////////////////////// + // set GPIF pins + + //set fifoadr to the appropriate endpoint + // {0,0}: EP2, data TX from host + // {0,1}: EP4, ctrl TX from host + // {1,0}: EP6, data RX to host + // {1,1}: EP8, ctrl RX to host + assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND), + (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)}; + //set sloe, slwr, slrd (all active low) + //SLOE gets asserted when we want data from the FX2; i.e., TX mode + assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)}; + //"read" and "write" here are from the master's point of view; + //so "read" means "transmit" and "write" means "receive" + assign slwr = ~{(state == STATE_DATA_RX) | (state == STATE_CTRL_RX)}; + assign slrd = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX)}; + + wire pktend_ctrl, pktend_data; + assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX)); + assign pktend_data = (state == STATE_PKTEND); + assign pktend = ~(pktend_ctrl | pktend_data); + + //mux between ctrl/data RX data out based on endpoint selection + assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data; + // GPIF output data lines, tristate + assign gpif_d = sloe ? gpif_d_out : 16'bz; + + // //////////////////////////////////////////////////////////////////// + // TX Data Path + + wire [18:0] tx19_data; + wire tx19_src_rdy, tx19_dst_rdy; + wire [35:0] tx36_data; + wire tx36_src_rdy, tx36_dst_rdy; + wire [17:0] data_tx_int; + wire tx_src_rdy_int, tx_dst_rdy_int; + + wire [15:0] wr_fifo_space; + + always @(posedge gpif_clk) + if(gpif_rst) + data_tx_dst_rdy <= 0; + else + data_tx_dst_rdy <= wr_fifo_space >= 256; + + fifo_cascade #(.WIDTH(18), .SIZE(12)) wr_fifo + (.clk(gpif_clk), .reset(gpif_rst), .clear(clear_tx), + .datain({eop,sop,gpif_d}), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(/*data_tx_dst_rdy*/), .space(wr_fifo_space), + .dataout(data_tx_int), .src_rdy_o(tx_src_rdy_int), .dst_rdy_i(tx_dst_rdy_int), .occupied()); + + fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) wr_fifo_2clk + (.wclk(gpif_clk), .datain(data_tx_int), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), .space(), + .rclk(fifo_clk), .dataout(tx19_data[17:0]), .src_rdy_o(tx19_src_rdy), .dst_rdy_i(tx19_dst_rdy), .occupied(), + .arst(fifo_rst)); + + assign tx19_data[18] = 1'b0; + + // join vita packets which are longer than one frame, drop frame padding + wire [18:0] refr_data; + wire refr_src_rdy, refr_dst_rdy; + wire refr_state; + wire refr_eof; + wire [15:0] refr_len; + + packet_reframer tx_packet_reframer + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .data_i(tx19_data), .src_rdy_i(tx19_src_rdy), .dst_rdy_o(tx19_dst_rdy), + .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy), + .state(refr_state), .eof_out(refr_eof), .length(refr_len)); + + fifo19_to_fifo36 #(.LE(1)) f19_to_f36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), + .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy)); + + fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), + .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); + + // //////////////////////////////////////////// + // RX Data Path + + wire [35:0] rx36_data; + wire rx36_src_rdy, rx36_dst_rdy; + wire [18:0] rx19_data; + wire rx19_src_rdy, rx19_dst_rdy; + wire [15:0] rxfifospace; + + //deep 36 bit wide input fifo buffers from DSP + fifo_cascade #(.WIDTH(36), .SIZE(8)) rx_fifo36 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), + .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); + + //convert to fifo19 + fifo36_to_fifo19 #(.LE(1)) f36_to_f19 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy), + .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) ); + + wire [18:0] data_rx_int; + wire rx_src_rdy_int, rx_dst_rdy_int; + //clock domain crossing fifo for RX data + fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk + (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(), + .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(), + .arst(fifo_rst)); + + //rd_fifo buffers writes to the 2clock fifo above + fifo_cascade #(.WIDTH(19), .SIZE(RXFIFOSIZE)) rd_fifo + (.clk(~gpif_clk), .reset(gpif_rst), .clear(clear_rx), + .datain(data_rx_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace), + .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied()); + + // //////////////////////////////////////////////////////////////////// + // FIFO to Wishbone interface + + wire [18:0] resp_data, resp_int; + wire resp_src_rdy, resp_dst_rdy; + wire resp_src_rdy_int, resp_dst_rdy_int; + + wire [18:0] tx_err19_data; + wire tx_err19_src_rdy, tx_err19_dst_rdy; + + wire [18:0] ctrl_data; + wire ctrl_src_rdy, ctrl_dst_rdy; + + fifo_to_wb fifo_to_wb + (.clk(fifo_clk), .reset(fifo_rst), .clear(0), + .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), + .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int), + .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o), + .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i), + .triggers(triggers), + .debug0(), .debug1()); + + // //////////////////////////////////////////////////////////////////// + // TX CTRL PATH (ctrl commands into Wishbone) + + //how does this use fifo_clk instead of wb_clk + //answer: on b100 fifo clk IS wb clk + fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk + (.wclk(gpif_clk), .datain({1'b0,eop,sop,gpif_d}), + .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(), + .rclk(fifo_clk), .dataout(ctrl_data), + .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(), + .arst(fifo_rst)); + + // //////////////////////////////////////////////////////////////////// + // RX CTRL PATH (async packets, ctrl response data) + + //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk + fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o), + .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) ); + + //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo + //how is this clocked on wb_clk? + fifo19_mux #(.prio(0)) mux_err_stream + (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), + .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int), + .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy), + .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy)); + + //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk + //the output of this fifo is CTRL DATA PENDING FOR GPIF + fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk + (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(), + .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl), + .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(), + .arst(wb_rst)); + + + // //////////////////////////////////////////////////////////////////// + // Debug support, timed and loopback + // RX side muxes test data into the same stream + + /////////////////////////////////////////////////////////////////////// + // debug lines + wire [31:0] debug_rd, debug_wr, debug_split0, debug_split1; + + wire [35:0] timedrx_data, loopbackrx_data, testrx_data; + wire [35:0] timedtx_data, loopbacktx_data, testtx_data; + wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, + testrx_src_rdy, testrx_dst_rdy; + wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, + testtx_src_rdy, testtx_dst_rdy; + wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; + + wire [31:0] total, crc_err, seq_err, len_err; + wire sel_testtx = test_ctrl[0]; + wire sel_loopbacktx = test_ctrl[1]; + wire pkt_src_enable = test_ctrl[2]; + wire pkt_sink_enable = test_ctrl[3]; +/* + fifo36_mux rx_test_mux_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), + .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), + .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); + + fifo36_mux rx_test_mux_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), + .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); + + fifo_short #(.WIDTH(36)) loopback_fifo + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), + .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), + .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); + + // Crossbar used as a demux for switching TX stream to main DSP or to test logic + crossbar36 tx_crossbar_lvl_1 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_testtx), + .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), + .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), + .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); + + crossbar36 tx_crossbar_lvl_2 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .cross(sel_loopbacktx), + .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), + .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input + .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), + .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); + + // Fixed rate TX traffic consumer + fifo_pacer tx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), + .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), + .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), + .underrun(tx_underrun), .overrun()); + + packet_verifier32 pktver32 + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), + .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), + .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); + + // Fixed rate RX traffic generator + vita_pkt_gen pktgen + (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), + .len(test_len), + .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); + + fifo_pacer rx_pacer + (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), + .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), + .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), + .underrun(), .overrun(rx_overrun)); +*/ + // //////////////////////////////////////////// + // DEBUG + + assign debug0 = { pktend_latch, data_rx_src_rdy, gpif_ctl[3:0], sloe, slrd, slwr, pktend, fifoadr[1:0], state[3:0], gpif_d[15:0]}; + //assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int, + // tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy, + // tx36_src_rdy, tx36_dst_rdy, + // gpif_ctl[3:0], fifoadr[1:0], + // wr_fifo_space[15:0]}; + assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy, + data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy}; +endmodule // slave_fifo diff --git a/fpga/usrp2/sdr_lib/Makefile.srcs b/fpga/usrp2/sdr_lib/Makefile.srcs index 629b92cc8..e6c4c5343 100644 --- a/fpga/usrp2/sdr_lib/Makefile.srcs +++ b/fpga/usrp2/sdr_lib/Makefile.srcs @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # ################################################## @@ -23,9 +23,10 @@ clip_reg.v \ cordic.v \ cordic_z24.v \ cordic_stage.v \ -dsp_core_rx.v \ -dsp_core_tx.v \ +ddc_chain.v \ +duc_chain.v \ dspengine_16to8.v \ +dspengine_8to16.v \ hb_dec.v \ hb_interp.v \ pipectrl.v \ @@ -39,4 +40,6 @@ sign_extend.v \ small_hb_dec.v \ small_hb_int.v \ tx_frontend.v \ +dsp_tx_glue.v \ +dsp_rx_glue.v \ )) diff --git a/fpga/usrp2/sdr_lib/cordic_z24.v b/fpga/usrp2/sdr_lib/cordic_z24.v index 97b7beaf7..51b074a33 100644 --- a/fpga/usrp2/sdr_lib/cordic_z24.v +++ b/fpga/usrp2/sdr_lib/cordic_z24.v @@ -119,8 +119,6 @@ module cordic_z24(clock, reset, enable, xi, yi, zi, xo, yo, zo ); assign xo = x20[bitwidth:1]; assign yo = y20[bitwidth:1]; assign zo = z20; - //assign xo = x20[bitwidth+1:2]; // CORDIC gain is ~1.6, plus gain from rotating vectors - //assign yo = y20[bitwidth+1:2]; endmodule // cordic diff --git a/fpga/usrp2/sdr_lib/ddc_chain.v b/fpga/usrp2/sdr_lib/ddc_chain.v new file mode 100644 index 000000000..c32c9f491 --- /dev/null +++ b/fpga/usrp2/sdr_lib/ddc_chain.v @@ -0,0 +1,190 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//! The USRP digital down-conversion chain + +module ddc_chain + #( + parameter BASE = 0, + parameter DSPNO = 0, + parameter WIDTH = 24 + ) + (input clk, input rst, input clr, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, + + // From RX frontend + input [WIDTH-1:0] rx_fe_i, + input [WIDTH-1:0] rx_fe_q, + + // To RX control + output [31:0] sample, + input run, + output strobe, + output [31:0] debug + ); + + localparam cwidth = 25; + localparam zwidth = 24; + + wire ddc_enb; + wire [31:0] phase_inc; + reg [31:0] phase; + + wire [17:0] scale_factor; + wire [cwidth-1:0] i_cordic, q_cordic; + wire [WIDTH-1:0] i_cordic_clip, q_cordic_clip; + wire [WIDTH-1:0] i_cic, q_cic; + wire [WIDTH-1:0] i_hb1, q_hb1; + wire [WIDTH-1:0] i_hb2, q_hb2; + + wire strobe_cic, strobe_hb1, strobe_hb2; + wire enable_hb1, enable_hb2; + wire [7:0] cic_decim_rate; + + reg [WIDTH-1:0] rx_fe_i_mux, rx_fe_q_mux; + wire realmode; + wire swap_iq; + + setting_reg #(.my_addr(BASE+0)) sr_0 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(phase_inc),.changed()); + + setting_reg #(.my_addr(BASE+1), .width(18)) sr_1 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(scale_factor),.changed()); + + setting_reg #(.my_addr(BASE+2), .width(10)) sr_2 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed()); + + setting_reg #(.my_addr(BASE+3), .width(2)) sr_3 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({realmode,swap_iq}),.changed()); + + // MUX so we can do realmode signals on either input + + always @(posedge clk) + if(swap_iq) + begin + rx_fe_i_mux <= rx_fe_q; + rx_fe_q_mux <= realmode ? 0 : rx_fe_i; + end + else + begin + rx_fe_i_mux <= rx_fe_i; + rx_fe_q_mux <= realmode ? 0 : rx_fe_q; + end + + // NCO + always @(posedge clk) + if(rst) + phase <= 0; + else if(~ddc_enb) + phase <= 0; + else + phase <= phase + phase_inc; + + //sign extension of cordic input + wire [WIDTH-1:0] to_ddc_chain_i, to_ddc_chain_q; + wire [cwidth-1:0] to_cordic_i, to_cordic_q; + sign_extend #(.bits_in(WIDTH), .bits_out(cwidth)) sign_extend_cordic_i (.in(to_ddc_chain_i), .out(to_cordic_i)); + sign_extend #(.bits_in(WIDTH), .bits_out(cwidth)) sign_extend_cordic_q (.in(to_ddc_chain_q), .out(to_cordic_q)); + + // CORDIC 24-bit I/O + cordic_z24 #(.bitwidth(cwidth)) + cordic(.clock(clk), .reset(rst), .enable(ddc_enb), + .xi(to_cordic_i),. yi(to_cordic_q), .zi(phase[31:32-zwidth]), + .xo(i_cordic),.yo(q_cordic),.zo() ); + + clip_reg #(.bits_in(cwidth), .bits_out(WIDTH)) clip_i + (.clk(clk), .in(i_cordic), .strobe_in(1'b1), .out(i_cordic_clip)); + clip_reg #(.bits_in(cwidth), .bits_out(WIDTH)) clip_q + (.clk(clk), .in(q_cordic), .strobe_in(1'b1), .out(q_cordic_clip)); + + // CIC decimator 24 bit I/O + cic_strober cic_strober(.clock(clk),.reset(rst),.enable(ddc_enb),.rate(cic_decim_rate), + .strobe_fast(1),.strobe_slow(strobe_cic) ); + + cic_decim #(.bw(WIDTH)) + decim_i (.clock(clk),.reset(rst),.enable(ddc_enb), + .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), + .signal_in(i_cordic_clip),.signal_out(i_cic)); + + cic_decim #(.bw(WIDTH)) + decim_q (.clock(clk),.reset(rst),.enable(ddc_enb), + .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), + .signal_in(q_cordic_clip),.signal_out(q_cic)); + + // First (small) halfband 24 bit I/O + small_hb_dec #(.WIDTH(WIDTH)) small_hb_i + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(ddc_enb), + .stb_in(strobe_cic),.data_in(i_cic),.stb_out(strobe_hb1),.data_out(i_hb1)); + + small_hb_dec #(.WIDTH(WIDTH)) small_hb_q + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(ddc_enb), + .stb_in(strobe_cic),.data_in(q_cic),.stb_out(),.data_out(q_hb1)); + + // Second (large) halfband 24 bit I/O + wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; + hb_dec #(.WIDTH(WIDTH)) hb_i + (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(ddc_enb),.cpi(cpi_hb), + .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); + + hb_dec #(.WIDTH(WIDTH)) hb_q + (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(ddc_enb),.cpi(cpi_hb), + .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); + + //scalar operation (gain of 6 bits) + wire [35:0] prod_i, prod_q; + + MULT18X18S mult_i + (.P(prod_i), .A(i_hb2[WIDTH-1:WIDTH-18]), .B(scale_factor), .C(clk), .CE(strobe_hb2), .R(rst) ); + MULT18X18S mult_q + (.P(prod_q), .A(q_hb2[WIDTH-1:WIDTH-18]), .B(scale_factor), .C(clk), .CE(strobe_hb2), .R(rst) ); + + //pipeline for the multiplier (gain of 10 bits) + reg [WIDTH-1:0] prod_reg_i, prod_reg_q; + reg strobe_mult; + + always @(posedge clk) begin + strobe_mult <= strobe_hb2; + prod_reg_i <= prod_i[33:34-WIDTH]; + prod_reg_q <= prod_q[33:34-WIDTH]; + end + + // Round final answer to 16 bits + wire [31:0] ddc_chain_out; + wire ddc_chain_stb; + + round_sd #(.WIDTH_IN(WIDTH),.WIDTH_OUT(16)) round_i + (.clk(clk),.reset(rst), .in(prod_reg_i),.strobe_in(strobe_mult), .out(ddc_chain_out[31:16]), .strobe_out(ddc_chain_stb)); + + round_sd #(.WIDTH_IN(WIDTH),.WIDTH_OUT(16)) round_q + (.clk(clk),.reset(rst), .in(prod_reg_q),.strobe_in(strobe_mult), .out(ddc_chain_out[15:0]), .strobe_out()); + + dsp_rx_glue #(.DSPNO(DSPNO), .WIDTH(WIDTH)) custom( + .clock(clk), .reset(rst), .clear(clr), .enable(run), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .frontend_i(rx_fe_i_mux), .frontend_q(rx_fe_q_mux), + .ddc_in_i(to_ddc_chain_i), .ddc_in_q(to_ddc_chain_q), + .ddc_out_sample(ddc_chain_out), .ddc_out_strobe(ddc_chain_stb), .ddc_out_enable(ddc_enb), + .bb_sample(sample), .bb_strobe(strobe)); + + assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_hb1, strobe_hb2}; + +endmodule // ddc_chain diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx.v b/fpga/usrp2/sdr_lib/dsp_core_rx.v deleted file mode 100644 index d1c7e238a..000000000 --- a/fpga/usrp2/sdr_lib/dsp_core_rx.v +++ /dev/null @@ -1,144 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - -module dsp_core_rx - #(parameter BASE = 160) - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - input [23:0] adc_i, input adc_ovf_i, - input [23:0] adc_q, input adc_ovf_q, - - output [31:0] sample, - input run, - output strobe, - output [31:0] debug - ); - - wire [31:0] phase_inc; - reg [31:0] phase; - - wire [24:0] i_cordic, q_cordic; - wire [23:0] i_cordic_clip, q_cordic_clip; - wire [23:0] i_cic, q_cic; - wire [23:0] i_hb1, q_hb1; - wire [23:0] i_hb2, q_hb2; - - wire strobe_cic, strobe_hb1, strobe_hb2; - wire enable_hb1, enable_hb2; - wire [7:0] cic_decim_rate; - - reg [23:0] adc_i_mux, adc_q_mux; - wire realmode; - wire swap_iq; - - setting_reg #(.my_addr(BASE+0)) sr_0 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phase_inc),.changed()); - - /* - setting_reg #(.my_addr(BASE+1)) sr_1 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); - */ - - setting_reg #(.my_addr(BASE+2), .width(10)) sr_2 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed()); - - setting_reg #(.my_addr(BASE+3), .width(2)) sr_3 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({realmode,swap_iq}),.changed()); - - // MUX so we can do realmode signals on either input - - always @(posedge clk) - if(swap_iq) - begin - adc_i_mux <= adc_q; - adc_q_mux <= realmode ? 24'd0 : adc_i; - end - else - begin - adc_i_mux <= adc_i; - adc_q_mux <= realmode ? 24'd0 : adc_q; - end - - // NCO - always @(posedge clk) - if(rst) - phase <= 0; - else if(~run) - phase <= 0; - else - phase <= phase + phase_inc; - - // CORDIC 24-bit I/O - cordic_z24 #(.bitwidth(25)) - cordic(.clock(clk), .reset(rst), .enable(run), - .xi({adc_i_mux[23],adc_i_mux}),. yi({adc_q_mux[23],adc_q_mux}), .zi(phase[31:8]), - .xo(i_cordic),.yo(q_cordic),.zo() ); - - clip_reg #(.bits_in(25), .bits_out(24)) clip_i - (.clk(clk), .in(i_cordic), .strobe_in(1'b1), .out(i_cordic_clip)); - clip_reg #(.bits_in(25), .bits_out(24)) clip_q - (.clk(clk), .in(q_cordic), .strobe_in(1'b1), .out(q_cordic_clip)); - - // CIC decimator 24 bit I/O - cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), - .strobe_fast(1),.strobe_slow(strobe_cic) ); - - cic_decim #(.bw(24)) - decim_i (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(i_cordic_clip),.signal_out(i_cic)); - - cic_decim #(.bw(24)) - decim_q (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(q_cordic_clip),.signal_out(q_cic)); - - // First (small) halfband 24 bit I/O - small_hb_dec #(.WIDTH(24)) small_hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic),.data_in(i_cic),.stb_out(strobe_hb1),.data_out(i_hb1)); - - small_hb_dec #(.WIDTH(24)) small_hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic),.data_in(q_cic),.stb_out(),.data_out(q_hb1)); - - // Second (large) halfband 24 bit I/O - wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; - hb_dec #(.WIDTH(24)) hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); - - hb_dec #(.WIDTH(24)) hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); - - // Round final answer to 16 bits - round_sd #(.WIDTH_IN(24),.WIDTH_OUT(16)) round_i - (.clk(clk),.reset(rst), .in(i_hb2),.strobe_in(strobe_hb2), .out(sample[31:16]), .strobe_out(strobe)); - - round_sd #(.WIDTH_IN(24),.WIDTH_OUT(16)) round_q - (.clk(clk),.reset(rst), .in(q_hb2),.strobe_in(strobe_hb2), .out(sample[15:0]), .strobe_out()); - - assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_hb1, strobe_hb2}; - -endmodule // dsp_core_rx diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_old.v b/fpga/usrp2/sdr_lib/dsp_core_rx_old.v deleted file mode 100644 index 90d5d839f..000000000 --- a/fpga/usrp2/sdr_lib/dsp_core_rx_old.v +++ /dev/null @@ -1,200 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - -`define DSP_CORE_RX_BASE 160 -module dsp_core_rx_old - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - input [13:0] adc_a, input adc_ovf_a, - input [13:0] adc_b, input adc_ovf_b, - - input [15:0] io_rx, - - output [31:0] sample, - input run, - output strobe, - output [31:0] debug - ); - - wire [15:0] scale_i, scale_q; - wire [13:0] adc_a_ofs, adc_b_ofs; - reg [13:0] adc_i, adc_q; - wire [31:0] phase_inc; - reg [31:0] phase; - - wire [35:0] prod_i, prod_q; - wire [23:0] i_cordic, q_cordic; - wire [23:0] i_cic, q_cic; - wire [17:0] i_cic_scaled, q_cic_scaled; - wire [17:0] i_hb1, q_hb1; - wire [17:0] i_hb2, q_hb2; - wire [15:0] i_out, q_out; - - wire strobe_cic, strobe_hb1, strobe_hb2; - wire enable_hb1, enable_hb2; - wire [7:0] cic_decim_rate; - - wire [31:10] UNUSED_1; - wire [31:4] UNUSED_2; - wire [31:2] UNUSED_3; - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phase_inc),.changed()); - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); - - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed()); - - rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+6)) rx_dcoffset_a - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_a),.adc_out(adc_a_ofs)); - - rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+7)) rx_dcoffset_b - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_b),.adc_out(adc_b_ofs)); - - wire [3:0] muxctrl; - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+8)) sr_8 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); - - wire [1:0] gpio_ena; - setting_reg #(.my_addr(`DSP_CORE_RX_BASE+9)) sr_9 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); - - // The TVRX connects to what is called adc_b, thus A and B are - // swapped throughout the design. - // - // In the interest of expediency and keeping the s/w sane, we just remap them here. - // The I & Q fields are mapped the same: - // 0 -> "the real A" (as determined by the TVRX) - // 1 -> "the real B" - // 2 -> const zero - - always @(posedge clk) - case(muxctrl[1:0]) // The I mapping - 0: adc_i <= adc_b_ofs; // "the real A" - 1: adc_i <= adc_a_ofs; - 2: adc_i <= 0; - default: adc_i <= 0; - endcase // case(muxctrl[1:0]) - - always @(posedge clk) - case(muxctrl[3:2]) // The Q mapping - 0: adc_q <= adc_b_ofs; // "the real A" - 1: adc_q <= adc_a_ofs; - 2: adc_q <= 0; - default: adc_q <= 0; - endcase // case(muxctrl[3:2]) - - always @(posedge clk) - if(rst) - phase <= 0; - else if(~run) - phase <= 0; - else - phase <= phase + phase_inc; - - MULT18X18S mult_i - (.P(prod_i), // 36-bit multiplier output - .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input - .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - MULT18X18S mult_q - (.P(prod_q), // 36-bit multiplier output - .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input - .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - - cordic_z24 #(.bitwidth(24)) - cordic(.clock(clk), .reset(rst), .enable(run), - .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]), - .xo(i_cordic),.yo(q_cordic),.zo() ); - - cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), - .strobe_fast(1),.strobe_slow(strobe_cic) ); - - cic_decim #(.bw(24)) - decim_i (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(i_cordic),.signal_out(i_cic)); - - cic_decim #(.bw(24)) - decim_q (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(q_cordic),.signal_out(q_cic)); - - round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled)); - round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled)); - reg strobe_cic_d1; - always @(posedge clk) strobe_cic_d1 <= strobe_cic; - - small_hb_dec #(.WIDTH(18)) small_hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1)); - - small_hb_dec #(.WIDTH(18)) small_hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1)); - - wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); - - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); - - round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out)); - round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out)); - - // Streaming GPIO - // - // io_rx[15] => I channel LSB if gpio_ena[0] high - // io_rx[14] => Q channel LSB if gpio_ena[1] high - - reg [31:0] sample_reg; - always @(posedge clk) - begin - sample_reg[31:17] <= i_out[15:1]; - sample_reg[15:1] <= q_out[15:1]; - sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0]; - sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0]; - end - - assign sample = sample_reg; - assign strobe = strobe_hb2; - assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2}; - -endmodule // dsp_core_rx diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v b/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v index 271db8cef..a221bed44 100644 --- a/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v +++ b/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v @@ -1,6 +1,6 @@ `timescale 1ns/1ns -module dsp_core_rx_tb(); +module ddc_chain_tb(); reg clk, rst; @@ -9,8 +9,8 @@ module dsp_core_rx_tb(); initial clk = 0; always #5 clk = ~clk; - initial $dumpfile("dsp_core_rx_tb.vcd"); - initial $dumpvars(0,dsp_core_rx_tb); + initial $dumpfile("ddc_chain_tb.vcd"); + initial $dumpvars(0,ddc_chain_tb); reg signed [23:0] adc_in; wire signed [15:0] adc_out_i, adc_out_q; @@ -27,7 +27,7 @@ module dsp_core_rx_tb(); reg [7:0] set_addr; reg [31:0] set_data; - dsp_core_rx #(.BASE(0)) dsp_core_rx + ddc_chain #(.BASE(0)) ddc_chain (.clk(clk),.rst(rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_i(adc_in), .adc_ovf_i(0), @@ -70,4 +70,4 @@ module dsp_core_rx_tb(); adc_in <= adc_in + 4; //adc_in <= (($random % 473) + 23)/4; */ -endmodule // dsp_core_rx_tb +endmodule // ddc_chain_tb diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v b/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v deleted file mode 100644 index 08dab37e6..000000000 --- a/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v +++ /dev/null @@ -1,200 +0,0 @@ -// -// Copyright 2011 Ettus Research LLC -// -// This program is free software: you can redistribute it and/or modify -// it under the terms of the GNU General Public License as published by -// the Free Software Foundation, either version 3 of the License, or -// (at your option) any later version. -// -// This program is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -// GNU General Public License for more details. -// -// You should have received a copy of the GNU General Public License -// along with this program. If not, see <http://www.gnu.org/licenses/>. -// - - -module dsp_core_rx - #(parameter BASE = 160) - (input clk, input rst, - input set_stb, input [7:0] set_addr, input [31:0] set_data, - - input [13:0] adc_a, input adc_ovf_a, - input [13:0] adc_b, input adc_ovf_b, - - input [15:0] io_rx, - - output [31:0] sample, - input run, - output strobe, - output [31:0] debug - ); - - wire [15:0] scale_i, scale_q; - wire [13:0] adc_a_ofs, adc_b_ofs; - reg [13:0] adc_i, adc_q; - wire [31:0] phase_inc; - reg [31:0] phase; - - wire [35:0] prod_i, prod_q; - wire [23:0] i_cordic, q_cordic; - wire [23:0] i_cic, q_cic; - wire [17:0] i_cic_scaled, q_cic_scaled; - wire [17:0] i_hb1, q_hb1; - wire [17:0] i_hb2, q_hb2; - wire [15:0] i_out, q_out; - - wire strobe_cic, strobe_hb1, strobe_hb2; - wire enable_hb1, enable_hb2; - wire [7:0] cic_decim_rate; - - wire [31:10] UNUSED_1; - wire [31:4] UNUSED_2; - wire [31:2] UNUSED_3; - - setting_reg #(.my_addr(BASE+0)) sr_0 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phase_inc),.changed()); - - setting_reg #(.my_addr(BASE+1)) sr_1 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); - - setting_reg #(.my_addr(BASE+2)) sr_2 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed()); - - rx_dcoffset #(.WIDTH(14),.ADDR(BASE+3)) rx_dcoffset_a - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_a),.adc_out(adc_a_ofs)); - - rx_dcoffset #(.WIDTH(14),.ADDR(BASE+4)) rx_dcoffset_b - (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_in(adc_b),.adc_out(adc_b_ofs)); - - wire [3:0] muxctrl; - setting_reg #(.my_addr(BASE+5)) sr_8 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_2,muxctrl}),.changed()); - - wire [1:0] gpio_ena; - setting_reg #(.my_addr(BASE+6)) sr_9 - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({UNUSED_3,gpio_ena}),.changed()); - - // The TVRX connects to what is called adc_b, thus A and B are - // swapped throughout the design. - // - // In the interest of expediency and keeping the s/w sane, we just remap them here. - // The I & Q fields are mapped the same: - // 0 -> "the real A" (as determined by the TVRX) - // 1 -> "the real B" - // 2 -> const zero - - always @(posedge clk) - case(muxctrl[1:0]) // The I mapping - 0: adc_i <= adc_b_ofs; // "the real A" - 1: adc_i <= adc_a_ofs; - 2: adc_i <= 0; - default: adc_i <= 0; - endcase // case(muxctrl[1:0]) - - always @(posedge clk) - case(muxctrl[3:2]) // The Q mapping - 0: adc_q <= adc_b_ofs; // "the real A" - 1: adc_q <= adc_a_ofs; - 2: adc_q <= 0; - default: adc_q <= 0; - endcase // case(muxctrl[3:2]) - - always @(posedge clk) - if(rst) - phase <= 0; - else if(~run) - phase <= 0; - else - phase <= phase + phase_inc; - - MULT18X18S mult_i - (.P(prod_i), // 36-bit multiplier output - .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input - .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - MULT18X18S mult_q - (.P(prod_q), // 36-bit multiplier output - .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input - .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input - .C(clk), // Clock input - .CE(1), // Clock enable input - .R(rst) // Synchronous reset input - ); - - - cordic_z24 #(.bitwidth(24)) - cordic(.clock(clk), .reset(rst), .enable(run), - .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]), - .xo(i_cordic),.yo(q_cordic),.zo() ); - - cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), - .strobe_fast(1),.strobe_slow(strobe_cic) ); - - cic_decim #(.bw(24)) - decim_i (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(i_cordic),.signal_out(i_cic)); - - cic_decim #(.bw(24)) - decim_q (.clock(clk),.reset(rst),.enable(run), - .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic), - .signal_in(q_cordic),.signal_out(q_cic)); - - round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled)); - round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled)); - reg strobe_cic_d1; - always @(posedge clk) strobe_cic_d1 <= strobe_cic; - - small_hb_dec #(.WIDTH(18)) small_hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1)); - - small_hb_dec #(.WIDTH(18)) small_hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run), - .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1)); - - wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate}; - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2)); - - hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q - (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb), - .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2)); - - round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out)); - round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out)); - - // Streaming GPIO - // - // io_rx[15] => I channel LSB if gpio_ena[0] high - // io_rx[14] => Q channel LSB if gpio_ena[1] high - - reg [31:0] sample_reg; - always @(posedge clk) - begin - sample_reg[31:17] <= i_out[15:1]; - sample_reg[15:1] <= q_out[15:1]; - sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0]; - sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0]; - end - - assign sample = sample_reg; - assign strobe = strobe_hb2; - assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2}; - -endmodule // dsp_core_rx diff --git a/fpga/usrp2/sdr_lib/dsp_rx_glue.v b/fpga/usrp2/sdr_lib/dsp_rx_glue.v new file mode 100644 index 000000000..038a67a29 --- /dev/null +++ b/fpga/usrp2/sdr_lib/dsp_rx_glue.v @@ -0,0 +1,98 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//The following module effects the IO of the DDC chain. +//By default, this entire module is a simple pass-through. + +module dsp_rx_glue +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //frontend bus width + parameter WIDTH = 24 +) +( + //control signals + input clock, input reset, input clear, input enable, + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate inputs directly from the RX frontend + input [WIDTH-1:0] frontend_i, + input [WIDTH-1:0] frontend_q, + + //full rate outputs directly to the DDC chain + output [WIDTH-1:0] ddc_in_i, + output [WIDTH-1:0] ddc_in_q, + + //strobed samples {I16,Q16} from the RX DDC chain + input [31:0] ddc_out_sample, + input ddc_out_strobe, //high on valid sample + output ddc_out_enable, //enables DDC module + + //strobbed baseband samples {I16,Q16} from this module + output [31:0] bb_sample, + output bb_strobe, //high on valid sample + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef RX_DSP0_MODULE + assign ddc_in_i = frontend_i; + assign ddc_in_q = frontend_q; + assign bb_sample = ddc_out_sample; + assign bb_strobe = ddc_out_strobe; + assign ddc_out_enable = enable; + `else + `RX_DSP0_MODULE #(.WIDTH(WIDTH)) rx_dsp0_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .ddc_in_i(ddc_in_i), .ddc_in_q(ddc_in_q), + .ddc_out_sample(ddc_out_sample), .ddc_out_strobe(ddc_out_strobe), .ddc_out_enable(ddc_out_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + else begin + `ifndef RX_DSP1_MODULE + assign ddc_in_i = frontend_i; + assign ddc_in_q = frontend_q; + assign bb_sample = ddc_out_sample; + assign bb_strobe = ddc_out_strobe; + assign ddc_out_enable = enable; + `else + `RX_DSP1_MODULE #(.WIDTH(WIDTH)) rx_dsp1_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .ddc_in_i(ddc_in_i), .ddc_in_q(ddc_in_q), + .ddc_out_sample(ddc_out_sample), .ddc_out_strobe(ddc_out_strobe), .ddc_out_enable(ddc_out_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + endgenerate + +endmodule //dsp_rx_glue diff --git a/fpga/usrp2/sdr_lib/dsp_tx_glue.v b/fpga/usrp2/sdr_lib/dsp_tx_glue.v new file mode 100644 index 000000000..46f6789ee --- /dev/null +++ b/fpga/usrp2/sdr_lib/dsp_tx_glue.v @@ -0,0 +1,98 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//The following module effects the IO of the DUC chain. +//By default, this entire module is a simple pass-through. + +module dsp_tx_glue +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //frontend bus width + parameter WIDTH = 24 +) +( + //control signals + input clock, input reset, input clear, input enable, + + //user settings bus, controlled through user setting regs API + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //full rate outputs directly to the TX frontend + output [WIDTH-1:0] frontend_i, + output [WIDTH-1:0] frontend_q, + + //full rate outputs directly from the DUC chain + input [WIDTH-1:0] duc_out_i, + input [WIDTH-1:0] duc_out_q, + + //strobed samples {I16,Q16} to the TX DUC chain + output [31:0] duc_in_sample, + input duc_in_strobe, //this is a backpressure signal + output duc_in_enable, //enables DUC module + + //strobbed baseband samples {I16,Q16} to this module + input [31:0] bb_sample, + output bb_strobe, //this is a backpressure signal + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef TX_DSP0_MODULE + assign frontend_i = duc_out_i; + assign frontend_q = duc_out_q; + assign duc_in_sample = bb_sample; + assign bb_strobe = duc_in_strobe; + assign duc_in_enable = enable; + `else + `TX_DSP0_MODULE #(.WIDTH(WIDTH)) tx_dsp0_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .duc_out_i(duc_out_i), .duc_out_q(duc_out_q), + .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + else begin + `ifndef TX_DSP1_MODULE + assign frontend_i = duc_out_i; + assign frontend_q = duc_out_q; + assign duc_in_sample = bb_sample; + assign bb_strobe = duc_in_strobe; + assign duc_in_enable = enable; + `else + `TX_DSP1_MODULE #(.WIDTH(WIDTH)) tx_dsp1_custom + ( + .clock(clock), .reset(reset), .clear(clear), .enable(enable), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .frontend_i(frontend_i), .frontend_q(frontend_q), + .duc_out_i(duc_out_i), .duc_out_q(duc_out_q), + .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable), + .bb_sample(bb_sample), .bb_strobe(bb_strobe) + ); + `endif + end + endgenerate + +endmodule //dsp_tx_glue diff --git a/fpga/usrp2/sdr_lib/dspengine_16to8.v b/fpga/usrp2/sdr_lib/dspengine_16to8.v index 53c5d29da..448c57d35 100644 --- a/fpga/usrp2/sdr_lib/dspengine_16to8.v +++ b/fpga/usrp2/sdr_lib/dspengine_16to8.v @@ -1,5 +1,5 @@ -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -32,13 +32,11 @@ module dspengine_16to8 input [35:0] access_dat_i ); - wire convert; - wire [17:0] scale_factor; - - setting_reg #(.my_addr(BASE),.width(19)) sr_16to8 + wire convert; + setting_reg #(.my_addr(BASE),.width(1)) sr_16to8 (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({convert,scale_factor}),.changed()); - + .in(set_data),.out(convert),.changed()); + reg [2:0] dsp_state; localparam DSP_IDLE = 0; localparam DSP_PARSE_HEADER = 1; @@ -63,7 +61,7 @@ module dspengine_16to8 wire [15:0] scaled_i, scaled_q; wire [7:0] i8, q8; reg [7:0] i8_reg, q8_reg; - wire stb_read, stb_mult, stb_clip, stb_round, val_read, val_mult, val_clip, val_round; + wire stb_read, stb_clip, val_read, val_clip; wire stb_out, stb_reg; reg even; @@ -193,29 +191,21 @@ module dspengine_16to8 wire [15:0] i16 = access_dat_i[31:16]; wire [15:0] q16 = access_dat_i[15:0]; - pipectrl #(.STAGES(4), .TAGWIDTH(2)) pipectrl + pipectrl #(.STAGES(2), .TAGWIDTH(2)) pipectrl (.clk(clk), .reset(reset), .src_rdy_i(send_to_pipe), .dst_rdy_o(), // dst_rdy_o will always be 1 since dst_rdy_i is 1, below .src_rdy_o(stb_out), .dst_rdy_i(1), // always accept output of chain - .strobes({stb_round,stb_clip,stb_mult,stb_read}), .valids({val_round,val_clip,val_mult,val_read}), + .strobes({stb_clip,stb_read}), .valids({val_clip,val_read}), .tag_i({last,even}), .tag_o({last_o,even_o})); always @(posedge clk) if(stb_out & ~even_o) {i8_reg,q8_reg} <= {i8,q8}; - - MULT18X18S mult_i - (.P(prod_i), .A(scale_factor), .B({i16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) ); - clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_i - (.clk(clk), .in(prod_i[35:12]), .out(scaled_i), .strobe_in(stb_clip), .strobe_out()); - round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_i - (.clk(clk), .reset(reset), .in(scaled_i), .strobe_in(stb_round), .out(i8), .strobe_out()); - - MULT18X18S mult_q - (.P(prod_q), .A(scale_factor), .B({q16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) ); - clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_q - (.clk(clk), .in(prod_q[35:12]), .out(scaled_q), .strobe_in(stb_clip), .strobe_out()); - round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_q - (.clk(clk), .reset(reset), .in(scaled_q), .strobe_in(stb_round), .out(q8), .strobe_out()); + + clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_i + (.clk(clk), .in(i16), .out(i8), .strobe_in(stb_clip), .strobe_out()); + + clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_q + (.clk(clk), .in(q16), .out(q8), .strobe_in(stb_clip), .strobe_out()); endmodule // dspengine_16to8 diff --git a/fpga/usrp2/sdr_lib/dspengine_8to16.v b/fpga/usrp2/sdr_lib/dspengine_8to16.v new file mode 100644 index 000000000..85187d78d --- /dev/null +++ b/fpga/usrp2/sdr_lib/dspengine_8to16.v @@ -0,0 +1,203 @@ + +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module dspengine_8to16 + #(parameter BASE = 0, + parameter BUF_SIZE = 9, + parameter HEADER_OFFSET = 0) + (input clk, input reset, input clear, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i + ); + + wire convert; + + setting_reg #(.my_addr(BASE),.width(1)) sr_8to16 + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(convert),.changed()); + + reg [3:0] dsp_state; + localparam DSP_IDLE = 0; + localparam DSP_IDLE_RD = 1; + localparam DSP_PARSE_HEADER = 2; + localparam DSP_READ = 3; + localparam DSP_READ_WAIT = 4; + localparam DSP_WRITE_1 = 5; + localparam DSP_WRITE_0 = 6; + localparam DSP_READ_TRAILER = 7; + localparam DSP_WRITE_TRAILER = 8; + localparam DSP_WRITE_HEADER = 9; + localparam DSP_DONE = 10; + + // Parse VITA header + wire is_if_data = (access_dat_i[31:29] == 3'b000); + wire has_streamid = access_dat_i[28]; + wire has_classid = access_dat_i[27]; + wire has_trailer = access_dat_i[26]; + // 25:24 reserved, aka SOB/EOB + wire has_secs = |access_dat_i[23:22]; + wire has_tics = |access_dat_i[21:20]; + wire [3:0] hdr_length = 1 + has_streamid + has_classid + has_classid + has_secs + has_tics + has_tics; + reg [15:0] hdr_length_reg; + + reg odd; + + reg [BUF_SIZE-1:0] read_adr, write_adr; + reg has_trailer_reg; + + reg [31:0] new_header, new_trailer, trailer_mask; + reg wait_for_trailer; + reg [15:0] data_in_len; + wire is_odd = access_dat_i[22] & access_dat_i[10]; + wire [15:0] data_in_lenx2 = {data_in_len[14:0], 1'b0} - is_odd; + + reg [7:0] i8_0, q8_0; + wire [7:0] i8_1 = access_dat_i[31:24]; + wire [7:0] q8_1 = access_dat_i[23:16]; + reg skip; + + + always @(posedge clk) + { i8_0, q8_0 } <= access_dat_i[15:0]; + + always @(posedge clk) + if(reset | clear) + dsp_state <= DSP_IDLE; + else + case(dsp_state) + DSP_IDLE : + begin + read_adr <= HEADER_OFFSET; + write_adr <= HEADER_OFFSET; + if(access_ok) + dsp_state <= DSP_IDLE_RD; + end + + DSP_IDLE_RD: //extra idle state for read to become valid + dsp_state <= DSP_PARSE_HEADER; + + DSP_PARSE_HEADER : + begin + has_trailer_reg <= has_trailer; + new_header[31:0] <= access_dat_i[31:0]; + hdr_length_reg <= hdr_length; + if(~is_if_data | ~convert | ~has_trailer) + // ~convert is valid (16 bit mode) but both ~trailer and ~is_if_data are both + // really error conditions on the TX side. We shouldn't ever see them in the TX chain + dsp_state <= DSP_WRITE_HEADER; + else + begin + read_adr <= access_dat_i[15:0] + HEADER_OFFSET - 1; // point to trailer + dsp_state <= DSP_READ_TRAILER; + wait_for_trailer <= 0; + data_in_len <= access_dat_i[15:0] - hdr_length - 1 /*trailer*/; + end + end + + DSP_READ_TRAILER : + begin + wait_for_trailer <= 1; + if(wait_for_trailer) + dsp_state <= DSP_WRITE_TRAILER; + new_trailer <= access_dat_i[31:0]; // Leave trailer unchanged + odd <= is_odd; + write_adr <= hdr_length_reg + data_in_lenx2 + HEADER_OFFSET; + end + + DSP_WRITE_TRAILER : + begin + dsp_state <= DSP_READ; + write_adr <= write_adr - 1; + read_adr <= read_adr - 1; + new_header[15:0] <= write_adr + (1 - HEADER_OFFSET); // length = addr of trailer + 1 + end + + DSP_READ : + begin + read_adr <= read_adr - 1; + if(odd) + dsp_state <= DSP_READ_WAIT; + else + dsp_state <= DSP_WRITE_1; + odd <= 0; + end + + DSP_READ_WAIT : + dsp_state <= DSP_WRITE_0; + + DSP_WRITE_1 : + begin + write_adr <= write_adr - 1; + if(write_adr == (hdr_length_reg+HEADER_OFFSET)) + begin + write_adr <= HEADER_OFFSET; + dsp_state <= DSP_WRITE_HEADER; + end + dsp_state <= DSP_WRITE_0; + end + + DSP_WRITE_0 : + begin + write_adr <= write_adr - 1; + if(write_adr == (hdr_length_reg+HEADER_OFFSET)) + begin + write_adr <= HEADER_OFFSET; + dsp_state <= DSP_WRITE_HEADER; + end + else + dsp_state <= DSP_READ; + end + + DSP_WRITE_HEADER : + dsp_state <= DSP_DONE; + + DSP_DONE : + begin + read_adr <= HEADER_OFFSET; + write_adr <= HEADER_OFFSET; + dsp_state <= DSP_IDLE; + end + endcase // case (dsp_state) + + assign access_skip_read = 0; + assign access_done = (dsp_state == DSP_DONE); + + assign access_stb = 1; + + assign access_we = (dsp_state == DSP_WRITE_HEADER) | + (dsp_state == DSP_WRITE_TRAILER) | + (dsp_state == DSP_WRITE_0) | + (dsp_state == DSP_WRITE_1); + + assign access_dat_o = (dsp_state == DSP_WRITE_HEADER) ? { 4'h0, new_header } : + (dsp_state == DSP_WRITE_TRAILER) ? { 4'h2, new_trailer } : + (dsp_state == DSP_WRITE_0) ? { 4'h0, i8_0, 8'd0, q8_0, 8'd0 } : + (dsp_state == DSP_WRITE_1) ? { 4'h0, i8_1, 8'd0, q8_1, 8'd0 } : + 34'h0DEADBEEF; + + assign access_adr = access_we ? write_adr : read_adr; + +endmodule // dspengine_16to8 diff --git a/fpga/usrp2/sdr_lib/dsp_core_tx.v b/fpga/usrp2/sdr_lib/duc_chain.v index 4e0163e0a..bd3402a1f 100644 --- a/fpga/usrp2/sdr_lib/dsp_core_tx.v +++ b/fpga/usrp2/sdr_lib/duc_chain.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -15,26 +15,35 @@ // along with this program. If not, see <http://www.gnu.org/licenses/>. // +//! The USRP digital up-conversion chain -module dsp_core_tx - #(parameter BASE=0) - (input clk, input rst, +module duc_chain + #( + parameter BASE = 0, + parameter DSPNO = 0, + parameter WIDTH = 24 + ) + (input clk, input rst, input clr, input set_stb, input [7:0] set_addr, input [31:0] set_data, + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, - output [23:0] tx_i, output [23:0] tx_q, + // To TX frontend + output [WIDTH-1:0] tx_fe_i, + output [WIDTH-1:0] tx_fe_q, - // To tx_control + // From TX control input [31:0] sample, input run, output strobe, output [31:0] debug ); - wire [15:0] i, q, scale_i, scale_q; + wire duc_enb; + wire [17:0] scale_factor; wire [31:0] phase_inc; reg [31:0] phase; wire [7:0] interp_rate; - wire [3:0] dacmux_a, dacmux_b; + wire [3:0] tx_femux_a, tx_femux_b; wire enable_hb1, enable_hb2; wire rate_change; @@ -42,9 +51,9 @@ module dsp_core_tx (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(phase_inc),.changed()); - setting_reg #(.my_addr(BASE+1)) sr_1 + setting_reg #(.my_addr(BASE+1), .width(18)) sr_1 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out({scale_i,scale_q}),.changed()); + .in(set_data),.out(scale_factor),.changed()); setting_reg #(.my_addr(BASE+2), .width(10)) sr_2 (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), @@ -57,13 +66,13 @@ module dsp_core_tx reg strobe_hb2 = 1; cic_strober #(.WIDTH(8)) - cic_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate), + cic_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate), .strobe_fast(1),.strobe_slow(strobe_cic_pre) ); cic_strober #(.WIDTH(2)) - hb2_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(enable_hb2 ? 2 : 1), + hb2_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb2 ? 2 : 1), .strobe_fast(strobe_cic_pre),.strobe_slow(strobe_hb2_pre) ); cic_strober #(.WIDTH(2)) - hb1_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(enable_hb1 ? 2 : 1), + hb1_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb1 ? 2 : 1), .strobe_fast(strobe_hb2_pre),.strobe_slow(strobe_hb1_pre) ); always @(posedge clk) strobe_hb1 <= strobe_hb1_pre; @@ -74,7 +83,7 @@ module dsp_core_tx always @(posedge clk) if(rst) phase <= 0; - else if(~run) + else if(~duc_enb) phase <= 0; else phase <= phase + phase_inc; @@ -82,8 +91,8 @@ module dsp_core_tx wire signed [17:0] da, db; wire signed [35:0] prod_i, prod_q; - wire [17:0] bb_i = {sample[31:16],2'b0}; - wire [17:0] bb_q = {sample[15:0],2'b0}; + wire [15:0] bb_i; + wire [15:0] bb_q; wire [17:0] i_interp, q_interp; wire [17:0] hb1_i, hb1_q, hb2_i, hb2_q; @@ -92,10 +101,10 @@ module dsp_core_tx // Note that max CIC rate is 128, which would give an overflow on cpo if enable_hb2 is true, // but the default case inside hb_interp handles this - hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_i - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_i),.stb_out(strobe_hb2),.data_out(hb1_i)); - hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_q - (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_q),.stb_out(strobe_hb2),.data_out(hb1_q)); + hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_i + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_i, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_i)); + hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_q + (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_q, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_q)); small_hb_int #(.WIDTH(18)) small_hb_interp_i (.clk(clk),.rst(rst),.bypass(~enable_hb2),.stb_in(strobe_hb2),.data_in(hb1_i), @@ -105,24 +114,22 @@ module dsp_core_tx .output_rate(interp_rate),.stb_out(strobe_cic),.data_out(hb2_q)); cic_interp #(.bw(18),.N(4),.log2_of_max_rate(7)) - cic_interp_i(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate), + cic_interp_i(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate), .strobe_in(strobe_cic),.strobe_out(1), .signal_in(hb2_i),.signal_out(i_interp)); cic_interp #(.bw(18),.N(4),.log2_of_max_rate(7)) - cic_interp_q(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate), + cic_interp_q(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate), .strobe_in(strobe_cic),.strobe_out(1), .signal_in(hb2_q),.signal_out(q_interp)); - assign strobe = strobe_hb1; - - localparam cwidth = 24; // was 18 + localparam cwidth = WIDTH; // was 18 localparam zwidth = 24; // was 16 wire [cwidth-1:0] da_c, db_c; cordic_z24 #(.bitwidth(cwidth)) - cordic(.clock(clk), .reset(rst), .enable(run), + cordic(.clock(clk), .reset(rst), .enable(duc_enb), .xi({i_interp,{(cwidth-18){1'b0}}}),.yi({q_interp,{(cwidth-18){1'b0}}}), .zi(phase[31:32-zwidth]), .xo(da_c),.yo(db_c),.zo() ); @@ -130,7 +137,7 @@ module dsp_core_tx MULT18X18S MULT18X18S_inst (.P(prod_i), // 36-bit multiplier output .A(da_c[cwidth-1:cwidth-18]), // 18-bit multiplier input - .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input + .B(scale_factor), // 18-bit multiplier input .C(clk), // Clock input .CE(1), // Clock enable input .R(rst) // Synchronous reset input @@ -139,15 +146,20 @@ module dsp_core_tx MULT18X18S MULT18X18S_inst_2 (.P(prod_q), // 36-bit multiplier output .A(db_c[cwidth-1:cwidth-18]), // 18-bit multiplier input - .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input + .B(scale_factor), // 18-bit multiplier input .C(clk), // Clock input .CE(1), // Clock enable input .R(rst) // Synchronous reset input ); - assign tx_i = prod_i[28:5]; - assign tx_q = prod_q[28:5]; - + dsp_tx_glue #(.DSPNO(DSPNO), .WIDTH(WIDTH)) dsp_tx_glue( + .clock(clk), .reset(rst), .clear(clr), .enable(run), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .frontend_i(tx_fe_i), .frontend_q(tx_fe_q), + .duc_out_i(prod_i[33:34-WIDTH]), .duc_out_q(prod_q[33:34-WIDTH]), + .duc_in_sample({bb_i, bb_q}), .duc_in_strobe(strobe_hb1), .duc_in_enable(duc_enb), + .bb_sample(sample), .bb_strobe(strobe)); + assign debug = {strobe_cic, strobe_hb1, strobe_hb2,run}; endmodule // dsp_core diff --git a/fpga/usrp2/sdr_lib/dummy_rx.v b/fpga/usrp2/sdr_lib/dummy_rx.v index b22d5f896..42bbe36b2 100644 --- a/fpga/usrp2/sdr_lib/dummy_rx.v +++ b/fpga/usrp2/sdr_lib/dummy_rx.v @@ -76,4 +76,4 @@ module dummy_rx q_out <= q_out + 1; -endmodule // dsp_core_rx +endmodule // ddc_chain diff --git a/fpga/usrp2/timing/time_64bit.v b/fpga/usrp2/timing/time_64bit.v index 03df07108..6f335890e 100644 --- a/fpga/usrp2/timing/time_64bit.v +++ b/fpga/usrp2/timing/time_64bit.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -18,7 +18,7 @@ module time_64bit - #(parameter TICKS_PER_SEC = 32'd100000000, + #( parameter BASE = 0) (input clk, input rst, input set_stb, input [7:0] set_addr, input [31:0] set_data, @@ -31,23 +31,20 @@ module time_64bit output [31:0] debug ); - localparam NEXT_SECS = 0; - localparam NEXT_TICKS = 1; + localparam NEXT_TICKS_HI = 0; + localparam NEXT_TICKS_LO = 1; localparam PPS_POLSRC = 2; localparam PPS_IMM = 3; - localparam TPS = 4; localparam MIMO_SYNC = 5; - reg [31:0] seconds, ticks; - wire end_of_second; + reg [63:0] ticks; always @(posedge clk) - vita_time <= {seconds,ticks}; + vita_time <= ticks; wire [63:0] vita_time_rcvd; - wire [31:0] next_ticks_preset, next_seconds_preset; - wire [31:0] ticks_per_sec_reg; + wire [63:0] next_ticks_preset; wire set_on_pps_trig; reg set_on_next_pps; wire pps_polarity, pps_source, set_imm; @@ -57,18 +54,18 @@ module time_64bit reg [15:0] sync_counter; wire sync_rcvd; - wire [31:0] mimo_secs, mimo_ticks; + wire [63:0] mimo_ticks; wire mimo_sync_now; wire mimo_sync; wire [7:0] sync_delay; - setting_reg #(.my_addr(BASE+NEXT_TICKS)) sr_next_ticks + setting_reg #(.my_addr(BASE+NEXT_TICKS_LO)) sr_next_ticks_lo (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(next_ticks_preset),.changed()); + .in(set_data),.out(next_ticks_preset[31:0]),.changed()); - setting_reg #(.my_addr(BASE+NEXT_SECS)) sr_next_secs + setting_reg #(.my_addr(BASE+NEXT_TICKS_HI)) sr_next_ticks_hi (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(next_seconds_preset),.changed(set_on_pps_trig)); + .in(set_data),.out(next_ticks_preset[63:32]),.changed(set_on_pps_trig)); setting_reg #(.my_addr(BASE+PPS_POLSRC), .width(2)) sr_pps_polsrc (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), @@ -78,10 +75,6 @@ module time_64bit (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(set_imm),.changed()); - setting_reg #(.my_addr(BASE+TPS), .at_reset(TICKS_PER_SEC)) sr_tps - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(ticks_per_sec_reg),.changed()); - setting_reg #(.my_addr(BASE+MIMO_SYNC), .at_reset(0), .width(9)) sr_mimosync (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), .in(set_data),.out({mimo_sync,sync_delay}),.changed()); @@ -110,29 +103,21 @@ module time_64bit else if(set_imm | pps_edge) set_on_next_pps <= 0; - wire [31:0] ticks_plus_one = ticks + 1; + wire [63:0] ticks_plus_one = ticks + 1; always @(posedge clk) if(rst) begin - seconds <= 32'd0; - ticks <= 32'd0; + ticks <= 64'd0; end else if((set_imm | pps_edge) & set_on_next_pps) begin - seconds <= next_seconds_preset; ticks <= next_ticks_preset; end else if(mimo_sync_now) begin - seconds <= mimo_secs; ticks <= mimo_ticks; end - else if(ticks_plus_one == ticks_per_sec_reg) - begin - seconds <= seconds + 1; - ticks <= 0; - end else ticks <= ticks_plus_one; @@ -162,9 +147,8 @@ module time_64bit .sync_rcvd(sync_rcvd), .exp_time_in(exp_time_in) ); - assign mimo_secs = vita_time_rcvd[63:32]; - assign mimo_ticks = vita_time_rcvd[31:0] + {16'd0,sync_delay}; - assign mimo_sync_now = mimo_sync & sync_rcvd & (mimo_ticks <= TICKS_PER_SEC); + assign mimo_ticks = vita_time_rcvd[63:0] + {48'd0,sync_delay}; + assign mimo_sync_now = mimo_sync & sync_rcvd; assign debug = { { 24'b0} , { 2'b0, exp_time_in, exp_time_out, mimo_sync, mimo_sync_now, sync_rcvd, send_sync} }; diff --git a/fpga/usrp2/timing/time_compare.v b/fpga/usrp2/timing/time_compare.v index 54ea000d6..21607f51c 100644 --- a/fpga/usrp2/timing/time_compare.v +++ b/fpga/usrp2/timing/time_compare.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -16,49 +16,19 @@ // -// Top 32 bits are integer seconds, bottom 32 are clock ticks within a second +// 64 bits worth of ticks module time_compare (input [63:0] time_now, input [63:0] trigger_time, output now, output early, - output late, + output late, output too_early); - - wire sec_match = (time_now[63:32] == trigger_time[63:32]); - wire sec_late = (time_now[63:32] > trigger_time[63:32]); - wire tick_match = (time_now[31:0] == trigger_time[31:0]); - wire tick_late = (time_now[31:0] > trigger_time[31:0]); -/* - assign now = sec_match & tick_match; - assign late = sec_late | (sec_match & tick_late); - assign early = ~now & ~late; -*/ + assign now = time_now == trigger_time; + assign late = time_now > trigger_time; + assign early = ~now & ~late; + assign too_early = 0; //not implemented - /* - assign now = (time_now == trigger_time); - assign late = (time_now > trigger_time); - assign early = (time_now < trigger_time); - */ - - // Compare fewer bits instead of 64 to speed up logic - // Unused bits are not significant - // Top bit of seconds would put us in year 2038, long after - // the warranty has run out :) - // Top 5 bits of ticks are always zero for clocks less than 134MHz - // "late" can drop bottom few bits of ticks, and just delay signaling - // of late. - // "now" cannot drop those bits, it needs to be exact. - - wire [57:0] short_now = {time_now[62:32],time_now[26:0]}; - wire [57:0] short_trig = {trigger_time[62:32],trigger_time[26:0]}; - - assign now = (short_now == short_trig); - assign late = (short_now[57:5] > short_trig[57:5]); - assign early = (short_now < short_trig); - - assign too_early = (trigger_time[63:32] > (time_now[63:32] + 4)); // Don't wait too long - endmodule // time_compare diff --git a/fpga/usrp2/top/B100/B100.ucf b/fpga/usrp2/top/B100/B100.ucf index 69fd49971..1c04c5d8d 100644 --- a/fpga/usrp2/top/B100/B100.ucf +++ b/fpga/usrp2/top/B100/B100.ucf @@ -25,6 +25,9 @@ NET "reset_n" LOC = "D5" ; NET "PPS_IN" LOC = "M14" ; NET "reset_codec" LOC = "B14" ; +## recycles fpga_cfg_cclk for reset from fw +NET "ext_reset" LOC = "R14" ; + ## GPIF NET "GPIF_D<15>" LOC = "P7" ; NET "GPIF_D<14>" LOC = "N8" ; @@ -43,17 +46,18 @@ NET "GPIF_D<2>" LOC = "N9" ; NET "GPIF_D<1>" LOC = "P9" ; NET "GPIF_D<0>" LOC = "P8" ; -NET "GPIF_CTL<3>" LOC = "N5" ; +##NET "GPIF_CTL<3>" LOC = "N5" ; +NET "GPIF_CTL<3>" LOC = "P12" ; NET "GPIF_CTL<2>" LOC = "M11" ; NET "GPIF_CTL<1>" LOC = "M9" ; NET "GPIF_CTL<0>" LOC = "M7" ; -NET "GPIF_RDY<3>" LOC = "N11" ; -NET "GPIF_RDY<2>" LOC = "T10" ; -NET "GPIF_RDY<1>" LOC = "T4" ; -NET "GPIF_RDY<0>" LOC = "R5" ; +##NET "GPIF_RDY<3>" LOC = "N11" ; +##NET "GPIF_RDY<2>" LOC = "T10" ; +NET "GPIF_SLWR" LOC = "T4" ; +NET "GPIF_SLRD" LOC = "R5" ; -NET "GPIF_CS" LOC = "P12" ; +##NET "GPIF_CS" LOC = "P12" ; NET "GPIF_SLOE" LOC = "R11" ; NET "GPIF_PKTEND" LOC = "P10" ; NET "GPIF_ADR<0>" LOC = "T11" ; diff --git a/fpga/usrp2/top/B100/B100.v b/fpga/usrp2/top/B100/B100.v index f2d75c54e..dcda974b4 100644 --- a/fpga/usrp2/top/B100/B100.v +++ b/fpga/usrp2/top/B100/B100.v @@ -23,8 +23,8 @@ module B100 output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, // GPIF - inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, - input [1:0] GPIF_ADR, output GPIF_CS, output GPIF_SLOE, output GPIF_PKTEND, + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, + output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND, input IFCLK, inout SDA_FPGA, inout SCL_FPGA, // I2C @@ -41,7 +41,8 @@ module B100 input [11:0] adc, input RXSYNC, input PPS_IN, - input reset_n, output reset_codec + input reset_n, output reset_codec, + input ext_reset ); assign reset_codec = 1; // Believed to be active low @@ -55,7 +56,7 @@ module B100 BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); - reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); + reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset)); // ///////////////////////////////////////////////////////////////////////// // SPI @@ -156,9 +157,10 @@ module B100 u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), .debug_txd(), .debug_rxd(1'b1), - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), - .gpif_misc({GPIF_CS,GPIF_SLOE,GPIF_PKTEND}), - .gpif_clk(IFCLK), + + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND), + .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD), + .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK), .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), diff --git a/fpga/usrp2/top/B100/Makefile.B100 b/fpga/usrp2/top/B100/Makefile.B100 index 90dd25942..3cdbb62c0 100644 --- a/fpga/usrp2/top/B100/Makefile.B100 +++ b/fpga/usrp2/top/B100/Makefile.B100 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -7,7 +7,14 @@ ################################################## TOP_MODULE := B100 BUILD_DIR := build-B100/ -export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + +################################################## +# Include other makefiles +################################################## include ../Makefile.common include ../../fifo/Makefile.srcs @@ -50,7 +57,7 @@ SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ $(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ -$(GPIF_SRCS) +$(GPIF_SRCS) $(CUSTOM_SRCS) ################################################## # Process Properties @@ -63,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_MOD_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/B100/core_compile b/fpga/usrp2/top/B100/core_compile index b2ccc8b49..b62cbaee0 100755 --- a/fpga/usrp2/top/B100/core_compile +++ b/fpga/usrp2/top/B100/core_compile @@ -1 +1 @@ -iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/B100/timing.ucf b/fpga/usrp2/top/B100/timing.ucf index b2a455f6d..96c47cf2c 100644 --- a/fpga/usrp2/top/B100/timing.ucf +++ b/fpga/usrp2/top/B100/timing.ucf @@ -3,3 +3,12 @@ TIMESPEC "TS_CLK_FPGA_P" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %; NET "IFCLK" TNM_NET = "IFCLK"; TIMESPEC "TS_IFCLK" = PERIOD "IFCLK" 20833 ps HIGH 50 %; + +#constrain FX2 IO +NET "GPIF_D<*>" MAXDELAY = 5.5 ns; +NET "GPIF_CTL<*>" MAXDELAY = 5.5 ns; +NET "GPIF_ADR<*>" MAXDELAY = 5.5ns; +NET "GPIF_SLWR" MAXDELAY = 5.5 ns; +NET "GPIF_SLRD" MAXDELAY = 5.5 ns; +NET "GPIF_SLOE" MAXDELAY = 5.5 ns; +NET "GPIF_PKTEND" MAXDELAY = 5.5 ns; diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v index c883c5ca8..e335fb8bb 100644 --- a/fpga/usrp2/top/B100/u1plus_core.v +++ b/fpga/usrp2/top/B100/u1plus_core.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -23,8 +23,9 @@ module u1plus_core output debug_txd, input debug_rxd, // GPIF - inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy, - output [2:0] gpif_misc, input gpif_clk, + inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe, + output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr, + input gpif_clk, inout db_sda, inout db_scl, output sclk, output [15:0] sen, output mosi, input miso, @@ -37,7 +38,7 @@ module u1plus_core ); localparam TXFIFOSIZE = 11; - localparam RXFIFOSIZE = 11; + localparam RXFIFOSIZE = 12; // 64 total regs in address space localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) @@ -52,9 +53,9 @@ module u1plus_core localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) localparam SR_REG_TEST32 = 60; // 1 reg - localparam SR_CLEAR_RX_FIFO = 61; // 1 reg - localparam SR_CLEAR_TX_FIFO = 62; // 1 reg + localparam SR_CLEAR_FIFO = 61; // 1 reg localparam SR_GLOBAL_RESET = 63; // 1 reg + localparam SR_USER_REGS = 64; // 2 regs localparam SR_GPIO = 128; // 5 regs @@ -64,11 +65,11 @@ module u1plus_core wire pps_int; wire [63:0] vita_time, vita_time_pps; reg [15:0] reg_cgen_ctrl, reg_test; - - wire [7:0] set_addr; - wire [31:0] set_data; - wire set_stb; - + + wire [7:0] set_addr, set_addr_user; + wire [31:0] set_data, set_data_user; + wire set_stb, set_stb_user; + wire [31:0] debug0; wire [31:0] debug1; @@ -105,68 +106,70 @@ module u1plus_core wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, tx_err_src_rdy, tx_err_dst_rdy; - wire clear_tx, clear_rx; - - setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_rx)); + wire clear_fifo; - setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx + setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + .in(set_data),.out(),.changed(clear_fifo)); - gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) - gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), - .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc), + wire run_rx0, run_rx1; + + slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) + slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), + .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd), + .pktend(gpif_pktend), .fifoadr(gpif_fifoadr), .wb_clk(wb_clk), .wb_rst(wb_rst), .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), .wb_ack_i(m0_ack), .triggers(8'd0), - .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx), + .dsp_rx_run(run_rx0 | run_rx1), + + .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo), .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy), .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), - .frames_per_packet(frames_per_packet), + .test_len(0), .test_rate(0), .test_ctrl(0), .debug0(debug0), .debug1(debug1)); // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing - wire [23:0] adc_i, adc_q; // 24 bits is total overkill here, but it matches u2/u2p - wire run_rx0, run_rx1; - + wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p + rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_a({rx_i,4'b00}),.adc_ovf_a(0), .adc_b({rx_q,4'b00}),.adc_ovf_b(0), - .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug()); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; - wire strobe_rx0; + wire strobe_rx0, clear_rx0; wire [35:0] vita_rx_data0; wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 + (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), .debug() ); @@ -174,22 +177,24 @@ module u1plus_core // DSP RX 1 wire [31:0] sample_rx1; - wire strobe_rx1; + wire strobe_rx1, clear_rx1; wire [35:0] vita_rx_data1; wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 + (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), .debug() ); @@ -197,7 +202,7 @@ module u1plus_core // RX Stream muxing fifo36_mux #(.prio(0)) mux_data_streams - (.clk(wb_clk), .reset(wb_rst), .clear(0), + (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo), .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); @@ -205,27 +210,38 @@ module u1plus_core // /////////////////////////////////////////////////////////////////////////////////// // DSP TX - wire [23:0] tx_i_int, tx_q_int; wire run_tx; - - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + wire [23:0] tx_fe_i, tx_fe_q; + wire [31:0] sample_tx; + wire strobe_tx, clear_tx; + + vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11), .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), .DSP_NUMBER(0)) vita_tx_chain (.clk(wb_clk), .reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i_int),.tx_q(tx_q_int), - .underrun(tx_underrun_dsp), .run(run_tx), + .sample(sample_tx), .strobe(strobe_tx), + .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain + (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1), + .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(tx_i), .dac_b(tx_q)); // ///////////////////////////////////////////////////////////////////////////////////// @@ -387,11 +403,17 @@ module u1plus_core .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb), + .set_addr(set_addr),.set_data(set_data), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), + .set_stb_user(set_stb_user) ); + // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd8, 16'd1}; //major, minor + localparam compat_num = {16'd9, 16'd0}; //major, minor wire [31:0] reg_test32; @@ -416,7 +438,7 @@ module u1plus_core // ///////////////////////////////////////////////////////////////////////// // VITA Timing - time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit + time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(0)); diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100 index 9b9a48911..ad5a0c1bd 100644 --- a/fpga/usrp2/top/E1x0/Makefile.E100 +++ b/fpga/usrp2/top/E1x0/Makefile.E100 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u1e BUILD_DIR = $(abspath build$(ISE)-E100) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -53,7 +57,7 @@ SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ $(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ -$(GPMC_SRCS) +$(GPMC_SRCS) $(CUSTOM_SRCS) ################################################## # Process Properties @@ -66,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_MOD_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110 index be2761baf..291ac0a44 100644 --- a/fpga/usrp2/top/E1x0/Makefile.E110 +++ b/fpga/usrp2/top/E1x0/Makefile.E110 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u1e BUILD_DIR = $(abspath build$(ISE)-E110) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -53,7 +57,7 @@ SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ $(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ -$(GPMC_SRCS) +$(GPMC_SRCS) $(CUSTOM_SRCS) ################################################## # Process Properties @@ -66,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_MOD_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile index 02d7f006e..14e138fa3 100755 --- a/fpga/usrp2/top/E1x0/core_compile +++ b/fpga/usrp2/top/E1x0/core_compile @@ -1,3 +1,3 @@ -iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/E1x0/u1e_core.v b/fpga/usrp2/top/E1x0/u1e_core.v index aede63bac..ee27af939 100644 --- a/fpga/usrp2/top/E1x0/u1e_core.v +++ b/fpga/usrp2/top/E1x0/u1e_core.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -56,9 +56,9 @@ module u1e_core localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) localparam SR_REG_TEST32 = 60; // 1 reg - localparam SR_CLEAR_RX_FIFO = 61; // 1 reg - localparam SR_CLEAR_TX_FIFO = 62; // 1 reg + localparam SR_CLEAR_FIFO = 61; // 1 reg localparam SR_GLOBAL_RESET = 63; // 1 reg + localparam SR_USER_REGS = 64; // 2 regs localparam SR_GPIO = 128; // 5 regs @@ -70,10 +70,10 @@ module u1e_core reg [15:0] reg_cgen_ctrl, reg_test, xfer_rate; wire [7:0] test_rate; wire [3:0] test_ctrl; - - wire [7:0] set_addr; - wire [31:0] set_data; - wire set_stb; + + wire [7:0] set_addr, set_addr_user; + wire [31:0] set_data, set_data_user; + wire set_stb, set_stb_user; wire [31:0] debug_vt; wire rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc; @@ -103,15 +103,13 @@ module u1e_core wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, tx_err_src_rdy, tx_err_dst_rdy; - wire clear_tx, clear_rx; - - setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_rx)); + wire clear_fifo; - setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx + setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + .in(set_data),.out(),.changed(clear_fifo)); + + wire run_rx0, run_rx1; gpmc #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) gpmc (.arst(wb_rst), @@ -126,7 +124,7 @@ module u1e_core .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), .wb_ack_i(m0_ack), - .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx), + .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo), .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), @@ -142,36 +140,37 @@ module u1e_core // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing - wire [23:0] adc_i, adc_q; // 24 bits is total overkill here, but it matches u2/u2p - wire run_rx0, run_rx1; - + wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p + rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(wb_clk),.rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_a({rx_i,4'b00}),.adc_ovf_a(0), .adc_b({rx_q,4'b00}),.adc_ovf_b(0), - .i_out(adc_i), .q_out(adc_q), .run(run_rx0 | run_rx1), .debug()); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; - wire strobe_rx0; + wire strobe_rx0, clear_rx0; wire [35:0] vita_rx_data0; wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 + (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), .debug() ); @@ -179,22 +178,24 @@ module u1e_core // DSP RX 1 wire [31:0] sample_rx1; - wire strobe_rx1; + wire strobe_rx1, clear_rx1; wire [35:0] vita_rx_data1; wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 - (.clk(wb_clk),.rst(wb_rst), + ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 + (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .adc_i(adc_i),.adc_ovf_i(0),.adc_q(adc_q),.adc_ovf_q(0), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1 - (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1 + (.clk(wb_clk),.reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(rx_overrun_dsp1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), .debug() ); @@ -202,7 +203,7 @@ module u1e_core // RX Stream muxing fifo36_mux #(.prio(0)) mux_data_streams - (.clk(wb_clk), .reset(wb_rst), .clear(0), + (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo), .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); @@ -210,27 +211,38 @@ module u1e_core // /////////////////////////////////////////////////////////////////////////////////// // DSP TX - wire [23:0] tx_i_int, tx_q_int; wire run_tx; - - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + wire [23:0] tx_fe_i, tx_fe_q; + wire [31:0] sample_tx; + wire strobe_tx, clear_tx; + + vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11), .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), .DSP_NUMBER(0)) vita_tx_chain (.clk(wb_clk), .reset(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i_int),.tx_q(tx_q_int), - .underrun(tx_underrun_dsp), .run(run_tx), + .sample(sample_tx), .strobe(strobe_tx), + .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain + (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .tx_i(tx_i_int), .tx_q(tx_q_int), .run(1'b1), + .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(tx_i), .dac_b(tx_q)); // ///////////////////////////////////////////////////////////////////////////////////// @@ -432,11 +444,17 @@ module u1e_core .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb), + .set_addr(set_addr),.set_data(set_data), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), + .set_stb_user(set_stb_user) ); + // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd8, 16'd1}; //major, minor + localparam compat_num = {16'd9, 16'd0}; //major, minor wire [31:0] reg_test32; @@ -462,7 +480,7 @@ module u1e_core // ///////////////////////////////////////////////////////////////////////// // VITA Timing - time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit + time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(0)); diff --git a/fpga/usrp2/top/N2x0/Makefile.N200R3 b/fpga/usrp2/top/N2x0/Makefile.N200R3 index 9ed5ece00..680cadf44 100644 --- a/fpga/usrp2/top/N2x0/Makefile.N200R3 +++ b/fpga/usrp2/top/N2x0/Makefile.N200R3 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u2plus BUILD_DIR = $(abspath build$(ISE)-N200R3) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -52,7 +56,8 @@ u2plus.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(CUSTOM_SRCS) ################################################## # Process Properties @@ -65,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/N2x0/Makefile.N200R4 b/fpga/usrp2/top/N2x0/Makefile.N200R4 index f8640224f..5c9ffd7a6 100644 --- a/fpga/usrp2/top/N2x0/Makefile.N200R4 +++ b/fpga/usrp2/top/N2x0/Makefile.N200R4 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u2plus BUILD_DIR = $(abspath build$(ISE)-N200R4) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -53,7 +57,8 @@ u2plus.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(CUSTOM_SRCS) ################################################## # Process Properties @@ -67,7 +72,7 @@ SYNTHESIZE_PROPERTIES = \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ "Use Synchronous Set" Auto \ -"Verilog Macros" "LVDS=1" +"Verilog Macros" "LVDS=1 $(CUSTOM_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/N2x0/Makefile.N210R3 b/fpga/usrp2/top/N2x0/Makefile.N210R3 index 2937dc409..0b53ac951 100644 --- a/fpga/usrp2/top/N2x0/Makefile.N210R3 +++ b/fpga/usrp2/top/N2x0/Makefile.N210R3 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u2plus BUILD_DIR = $(abspath build$(ISE)-N210R3) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -52,7 +56,8 @@ u2plus.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(CUSTOM_SRCS) ################################################## # Process Properties @@ -65,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/N2x0/Makefile.N210R4 b/fpga/usrp2/top/N2x0/Makefile.N210R4 index 39a2508f9..a7d2a9b49 100644 --- a/fpga/usrp2/top/N2x0/Makefile.N210R4 +++ b/fpga/usrp2/top/N2x0/Makefile.N210R4 @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u2plus BUILD_DIR = $(abspath build$(ISE)-N210R4) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -53,7 +57,8 @@ u2plus.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(CUSTOM_SRCS) ################################################## # Process Properties @@ -67,7 +72,7 @@ SYNTHESIZE_PROPERTIES = \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ "Use Synchronous Set" Auto \ -"Verilog Macros" "LVDS=1" +"Verilog Macros" "LVDS=1 $(CUSTOM_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/N2x0/u2plus_core.v b/fpga/usrp2/top/N2x0/u2plus_core.v index 3ead0db8e..378f212e4 100644 --- a/fpga/usrp2/top/N2x0/u2plus_core.v +++ b/fpga/usrp2/top/N2x0/u2plus_core.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -152,7 +152,7 @@ module u2plus_core localparam SR_SIMTIMER = 8; // 2 localparam SR_TIME64 = 10; // 6 localparam SR_BUF_POOL = 16; // 4 - + localparam SR_USER_REGS = 20; // 2 localparam SR_RX_FRONT = 24; // 5 localparam SR_RX_CTRL0 = 32; // 9 localparam SR_RX_DSP0 = 48; // 7 @@ -170,15 +170,16 @@ module u2plus_core // all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs // localparam DSP_TX_FIFOSIZE = 9; unused -- DSPTX uses extram fifo localparam DSP_RX_FIFOSIZE = 10; + localparam DSP_TX_FIFOSIZE = 10; localparam ETH_TX_FIFOSIZE = 9; localparam ETH_RX_FIFOSIZE = 11; localparam SERDES_TX_FIFOSIZE = 9; localparam SERDES_RX_FIFOSIZE = 9; // RX currently doesn't use a fifo? - - wire [7:0] set_addr, set_addr_dsp; - wire [31:0] set_data, set_data_dsp; - wire set_stb, set_stb_dsp; - + + wire [7:0] set_addr, set_addr_dsp, set_addr_user; + wire [31:0] set_data, set_data_dsp, set_data_user; + wire set_stb, set_stb_dsp, set_stb_user; + reg wb_rst; wire dsp_rst = wb_rst; @@ -435,7 +436,7 @@ module u2plus_core // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd8, 16'd2}; //major, minor + localparam compat_num = {16'd9, 16'd0}; //major, minor wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), @@ -478,7 +479,13 @@ module u2plus_core settings_bus_crossclock settings_bus_crossclock (.clk_i(wb_clk), .rst_i(wb_rst), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data), .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp)); - + + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(dsp_clk),.rst(dsp_rst),.set_stb(set_stb_dsp), + .set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), + .set_stb_user(set_stb_user) ); + // Output control lines wire [7:0] clock_outs, serdes_outs, adc_outs; assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; @@ -559,68 +566,62 @@ module u2plus_core // ///////////////////////////////////////////////////////////////////////// // ADC Frontend - wire [23:0] adc_i, adc_q; + wire [23:0] rx_fe_i, rx_fe_q; rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_a({adc_a,2'b00}),.adc_ovf_a(adc_ovf_a), .adc_b({adc_b,2'b00}),.adc_ovf_b(adc_ovf_b), - .i_out(adc_i), .q_out(adc_q), .run(run_rx0_d1 | run_rx1_d1), .debug()); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0_d1 | run_rx1_d1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; - wire clear_rx0, strobe_rx0; + wire strobe_rx0, clear_rx0; always @(posedge dsp_clk) run_rx0_d1 <= run_rx0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 - (.clk(dsp_clk),.rst(dsp_rst), + ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 + (.clk(dsp_clk), .rst(dsp_rst), .clr(clear_rx0), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), .debug() ); - setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear_rx0 - (.clk(dsp_clk),.rst(dsp_rst), - .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx0)); - - vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain0 - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx0), + vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE), .DSP_NUMBER(0)) vita_rx_chain0 + (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(overrun0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), .rx_data_o(wr1_dat), .rx_src_rdy_o(wr1_ready_i), .rx_dst_rdy_i(wr1_ready_o), .debug() ); // ///////////////////////////////////////////////////////////////////////// // DSP RX 1 wire [31:0] sample_rx1; - wire clear_rx1, strobe_rx1; + wire strobe_rx1, clear_rx1; always @(posedge dsp_clk) run_rx1_d1 <= run_rx1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 - (.clk(dsp_clk),.rst(dsp_rst), + ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 + (.clk(dsp_clk), .rst(dsp_rst), .clr(clear_rx1), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), .debug() ); - setting_reg #(.my_addr(SR_RX_CTRL1+3)) sr_clear_rx1 - (.clk(dsp_clk),.rst(dsp_rst), - .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx1)); - - vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain1 - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx1), + vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE), .DSP_NUMBER(1)) vita_rx_chain1 + (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(overrun1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), .rx_data_o(wr3_dat), .rx_src_rdy_o(wr3_ready_i), .rx_dst_rdy_i(wr3_ready_o), .debug() ); @@ -632,10 +633,6 @@ module u2plus_core wire [31:0] debug_vt; wire clear_tx; - setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx - (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), - .in(set_data_dsp),.out(),.changed(clear_tx)); - assign RAM_A[20:18] = 3'b0; ext_fifo #(.EXT_WIDTH(36),.INT_WIDTH(36),.RAM_DEPTH(18),.FIFO_DEPTH(18)) @@ -661,28 +658,39 @@ module u2plus_core .debug(debug_extfifo), .debug2(debug_extfifo2) ); - wire [23:0] tx_i, tx_q; + wire [23:0] tx_fe_i, tx_fe_q; + wire [31:0] sample_tx; + wire strobe_tx; - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(DSP_TX_FIFOSIZE), .REPORT_ERROR(1), .DO_FLOW_CONTROL(1), .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1), .DSP_NUMBER(0)) vita_tx_chain (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i),.tx_q(tx_q), - .underrun(underrun), .run(run_tx), + .sample(sample_tx), .strobe(strobe_tx), + .underrun(underrun), .run(run_tx), .clear_o(clear_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain + (.clk(dsp_clk),.rst(dsp_rst), .clr(clear_tx), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .tx_i(tx_i), .tx_q(tx_q), .run(1'b1), + .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(dac_a), .dac_b(dac_b)); - + // /////////////////////////////////////////////////////////////////////////////////// // SERDES @@ -701,7 +709,7 @@ module u2plus_core wire [31:0] debug_sync; - time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit + time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(exp_time_in), .exp_time_out(exp_time_out), .good_sync(good_sync), .debug(debug_sync)); diff --git a/fpga/usrp2/top/USRP2/Makefile b/fpga/usrp2/top/USRP2/Makefile index 8ebb43639..1fc375c76 100644 --- a/fpga/usrp2/top/USRP2/Makefile +++ b/fpga/usrp2/top/USRP2/Makefile @@ -1,5 +1,5 @@ # -# Copyright 2008 Ettus Research LLC +# Copyright 2008-2012 Ettus Research LLC # ################################################## @@ -8,6 +8,10 @@ TOP_MODULE = u2_rev3 BUILD_DIR = $(abspath build) +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + ################################################## # Include other makefiles ################################################## @@ -52,7 +56,8 @@ u2_rev3.ucf SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ $(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ $(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ -$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(CUSTOM_SRCS) ################################################## # Process Properties @@ -65,7 +70,8 @@ SYNTHESIZE_PROPERTIES = \ "Register Balancing" Yes \ "Use Clock Enable" Auto \ "Use Synchronous Reset" Auto \ -"Use Synchronous Set" Auto +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_DEFS)" TRANSLATE_PROPERTIES = \ "Macro Search Path" "$(shell pwd)/../../coregen/" diff --git a/fpga/usrp2/top/USRP2/u2_core.v b/fpga/usrp2/top/USRP2/u2_core.v index bbd0e9337..9b26b98e1 100644 --- a/fpga/usrp2/top/USRP2/u2_core.v +++ b/fpga/usrp2/top/USRP2/u2_core.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -157,7 +157,7 @@ module u2_core localparam SR_SIMTIMER = 8; // 2 localparam SR_TIME64 = 10; // 6 localparam SR_BUF_POOL = 16; // 4 - + localparam SR_USER_REGS = 20; // 2 localparam SR_RX_FRONT = 24; // 5 localparam SR_RX_CTRL0 = 32; // 9 localparam SR_RX_DSP0 = 48; // 7 @@ -175,15 +175,16 @@ module u2_core // all (most?) are 36 bits wide, so 9 is 1 BRAM, 10 is 2, 11 is 4 BRAMs // localparam DSP_TX_FIFOSIZE = 9; unused -- DSPTX uses extram fifo localparam DSP_RX_FIFOSIZE = 10; + localparam DSP_TX_FIFOSIZE = 10; localparam ETH_TX_FIFOSIZE = 9; localparam ETH_RX_FIFOSIZE = 11; localparam SERDES_TX_FIFOSIZE = 9; localparam SERDES_RX_FIFOSIZE = 9; // RX currently doesn't use a fifo? - - wire [7:0] set_addr, set_addr_dsp; - wire [31:0] set_data, set_data_dsp; - wire set_stb, set_stb_dsp; - + + wire [7:0] set_addr, set_addr_dsp, set_addr_user; + wire [31:0] set_data, set_data_dsp, set_data_user; + wire set_stb, set_stb_dsp, set_stb_user; + wire ram_loader_done, ram_loader_rst; wire wb_rst; wire dsp_rst = wb_rst; @@ -441,7 +442,7 @@ module u2_core // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd8, 16'd2}; //major, minor + localparam compat_num = {16'd9, 16'd0}; //major, minor wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), @@ -484,7 +485,13 @@ module u2_core settings_bus_crossclock settings_bus_crossclock (.clk_i(wb_clk), .rst_i(wb_rst), .set_stb_i(set_stb), .set_addr_i(set_addr), .set_data_i(set_data), .clk_o(dsp_clk), .rst_o(dsp_rst), .set_stb_o(set_stb_dsp), .set_addr_o(set_addr_dsp), .set_data_o(set_data_dsp)); - + + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(dsp_clk),.rst(dsp_rst),.set_stb(set_stb_dsp), + .set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), + .set_stb_user(set_stb_user) ); + // Output control lines wire [7:0] clock_outs, serdes_outs, adc_outs; assign {clock_ready, clk_en[1:0], clk_sel[1:0]} = clock_outs[4:0]; @@ -547,68 +554,62 @@ module u2_core // ///////////////////////////////////////////////////////////////////////// // ADC Frontend - wire [23:0] adc_i, adc_q; + wire [23:0] rx_fe_i, rx_fe_q; rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend (.clk(dsp_clk),.rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), .adc_a({adc_a,2'b00}),.adc_ovf_a(adc_ovf_a), .adc_b({adc_b,2'b00}),.adc_ovf_b(adc_ovf_b), - .i_out(adc_i), .q_out(adc_q), .run(run_rx0_d1 | run_rx1_d1), .debug()); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0_d1 | run_rx1_d1), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX 0 wire [31:0] sample_rx0; - wire clear_rx0, strobe_rx0; + wire strobe_rx0, clear_rx0; always @(posedge dsp_clk) run_rx0_d1 <= run_rx0; - dsp_core_rx #(.BASE(SR_RX_DSP0)) dsp_core_rx0 - (.clk(dsp_clk),.rst(dsp_rst), + ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 + (.clk(dsp_clk), .rst(dsp_rst), .clr(clear_rx0), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx0), .run(run_rx0_d1), .strobe(strobe_rx0), .debug() ); - setting_reg #(.my_addr(SR_RX_CTRL0+3)) sr_clear_rx0 - (.clk(dsp_clk),.rst(dsp_rst), - .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx0)); - - vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain0 - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx0), + vita_rx_chain #(.BASE(SR_RX_CTRL0),.UNIT(0),.FIFOSIZE(DSP_RX_FIFOSIZE), .DSP_NUMBER(0)) vita_rx_chain0 + (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(overrun0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), + .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), .rx_data_o(wr1_dat), .rx_src_rdy_o(wr1_ready_i), .rx_dst_rdy_i(wr1_ready_o), .debug() ); // ///////////////////////////////////////////////////////////////////////// // DSP RX 1 wire [31:0] sample_rx1; - wire clear_rx1, strobe_rx1; + wire strobe_rx1, clear_rx1; always @(posedge dsp_clk) run_rx1_d1 <= run_rx1; - dsp_core_rx #(.BASE(SR_RX_DSP1)) dsp_core_rx1 - (.clk(dsp_clk),.rst(dsp_rst), + ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 + (.clk(dsp_clk), .rst(dsp_rst), .clr(clear_rx1), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .adc_i(adc_i),.adc_ovf_i(adc_ovf_a),.adc_q(adc_q),.adc_ovf_q(adc_ovf_b), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx1), .run(run_rx1_d1), .strobe(strobe_rx1), .debug() ); - setting_reg #(.my_addr(SR_RX_CTRL1+3)) sr_clear_rx1 - (.clk(dsp_clk),.rst(dsp_rst), - .strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp), - .out(),.changed(clear_rx1)); - - vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE)) vita_rx_chain1 - (.clk(dsp_clk), .reset(dsp_rst), .clear(clear_rx1), + vita_rx_chain #(.BASE(SR_RX_CTRL1),.UNIT(2),.FIFOSIZE(DSP_RX_FIFOSIZE), .DSP_NUMBER(1)) vita_rx_chain1 + (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(overrun1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), + .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), .rx_data_o(wr3_dat), .rx_src_rdy_o(wr3_ready_i), .rx_dst_rdy_i(wr3_ready_o), .debug() ); @@ -620,10 +621,6 @@ module u2_core wire [31:0] debug_vt; wire clear_tx; - setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx - (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), - .in(set_data_dsp),.out(),.changed(clear_tx)); - ext_fifo #(.EXT_WIDTH(18),.INT_WIDTH(36),.RAM_DEPTH(19),.FIFO_DEPTH(19)) ext_fifo_i1 (.int_clk(dsp_clk), @@ -647,28 +644,39 @@ module u2_core .debug(debug_extfifo), .debug2(debug_extfifo2) ); - wire [23:0] tx_i, tx_q; + wire [23:0] tx_fe_i, tx_fe_q; + wire [31:0] sample_tx; + wire strobe_tx; - vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(DSP_TX_FIFOSIZE), .REPORT_ERROR(1), .DO_FLOW_CONTROL(1), .PROT_ENG_FLAGS(1), .USE_TRANS_HEADER(1), .DSP_NUMBER(0)) vita_tx_chain (.clk(dsp_clk), .reset(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), - .tx_i(tx_i),.tx_q(tx_q), - .underrun(underrun), .run(run_tx), + .sample(sample_tx), .strobe(strobe_tx), + .underrun(underrun), .run(run_tx), .clear_o(clear_tx), .debug(debug_vt)); + duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain + (.clk(dsp_clk),.rst(dsp_rst), .clr(clear_tx), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), + .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), + .debug() ); + tx_frontend #(.BASE(SR_TX_FRONT)) tx_frontend (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), - .tx_i(tx_i), .tx_q(tx_q), .run(1'b1), + .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(dac_a), .dac_b(dac_b)); - + // /////////////////////////////////////////////////////////////////////////////////// // SERDES @@ -689,7 +697,7 @@ module u2_core wire [31:0] debug_sync; - time_64bit #(.TICKS_PER_SEC(32'd100000000),.BASE(SR_TIME64)) time_64bit + time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(dsp_clk), .rst(dsp_rst), .set_stb(set_stb_dsp), .set_addr(set_addr_dsp), .set_data(set_data_dsp), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), .exp_time_in(exp_time_in), .exp_time_out(exp_time_out), .good_sync(good_sync), .debug(debug_sync)); diff --git a/fpga/usrp2/vrt/Makefile.srcs b/fpga/usrp2/vrt/Makefile.srcs index 166ed44ef..84ba5dc29 100644 --- a/fpga/usrp2/vrt/Makefile.srcs +++ b/fpga/usrp2/vrt/Makefile.srcs @@ -15,4 +15,6 @@ vita_tx_chain.v \ gen_context_pkt.v \ trigger_context_pkt.v \ vita_pkt_gen.v \ +vita_rx_engine_glue.v \ +vita_tx_engine_glue.v \ )) diff --git a/fpga/usrp2/vrt/gen_context_pkt.v b/fpga/usrp2/vrt/gen_context_pkt.v index bdfca8237..d6674e887 100644 --- a/fpga/usrp2/vrt/gen_context_pkt.v +++ b/fpga/usrp2/vrt/gen_context_pkt.v @@ -32,12 +32,11 @@ module gen_context_pkt localparam CTXT_PROT_ENG = 1; localparam CTXT_HEADER = 2; localparam CTXT_STREAMID = 3; - localparam CTXT_SECS = 4; - localparam CTXT_TICS = 5; - localparam CTXT_TICS2 = 6; - localparam CTXT_MESSAGE = 7; - localparam CTXT_FLOWCTRL = 8; - localparam CTXT_DONE = 9; + localparam CTXT_TICS = 4; + localparam CTXT_TICS2 = 5; + localparam CTXT_MESSAGE = 6; + localparam CTXT_FLOWCTRL = 7; + localparam CTXT_DONE = 8; reg [33:0] data_int; wire src_rdy_int, dst_rdy_int; @@ -88,11 +87,10 @@ module gen_context_pkt always @* case(ctxt_state) - CTXT_PROT_ENG : data_int <= { 2'b01, 13'b0, DSP_NUMBER[0], 1'b1, 1'b1, 16'd28 }; // UDP port 1 or 3 - CTXT_HEADER : data_int <= { 1'b0, (PROT_ENG_FLAGS ? 1'b0 : 1'b1), 12'b010100001101, seqno, 16'd7 }; + CTXT_PROT_ENG : data_int <= { 2'b01, 13'b0, DSP_NUMBER[0], 1'b1, 1'b1, 16'd24 }; // UDP port 1 or 3 + CTXT_HEADER : data_int <= { 1'b0, (PROT_ENG_FLAGS ? 1'b0 : 1'b1), 12'b010100000001, seqno, 16'd6 }; CTXT_STREAMID : data_int <= { 2'b00, streamid }; - CTXT_SECS : data_int <= { 2'b00, err_time[63:32] }; - CTXT_TICS : data_int <= { 2'b00, 32'd0 }; + CTXT_TICS : data_int <= { 2'b00, err_time[63:32] }; CTXT_TICS2 : data_int <= { 2'b00, err_time[31:0] }; CTXT_MESSAGE : data_int <= { 2'b00, message }; CTXT_FLOWCTRL : data_int <= { 2'b10, seqnum }; diff --git a/fpga/usrp2/vrt/vita_rx_chain.v b/fpga/usrp2/vrt/vita_rx_chain.v index 8b41e5fa8..c57e6cc05 100644 --- a/fpga/usrp2/vrt/vita_rx_chain.v +++ b/fpga/usrp2/vrt/vita_rx_chain.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -20,21 +20,31 @@ module vita_rx_chain #(parameter BASE=0, parameter UNIT=0, parameter FIFOSIZE=10, - parameter PROT_ENG_FLAGS=1) - (input clk, input reset, input clear, + parameter PROT_ENG_FLAGS=1, + parameter DSP_NUMBER=0) + (input clk, input reset, input set_stb, input [7:0] set_addr, input [31:0] set_data, - input [63:0] vita_time, output overrun, - input [31:0] sample, output run, input strobe, + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, + input [63:0] vita_time, + input [31:0] sample, input strobe, output [35:0] rx_data_o, output rx_src_rdy_o, input rx_dst_rdy_i, + output overrun, output run, output clear_o, output [31:0] debug ); - + wire [100:0] sample_data; wire sample_dst_rdy, sample_src_rdy; wire [31:0] vrc_debug, vrf_debug; wire [35:0] rx_data_int; wire rx_src_rdy_int, rx_dst_rdy_int; - + + wire clear; + assign clear_o = clear; + + setting_reg #(.my_addr(BASE+3)) sr + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(clear)); + vita_rx_control #(.BASE(BASE), .WIDTH(32)) vita_rx_control (.clk(clk), .reset(reset), .clear(clear), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), @@ -65,9 +75,10 @@ module vita_rx_chain .data_i(rx_data_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .data_o(rx_data_int2), .src_rdy_o(rx_src_rdy_int2), .dst_rdy_i(rx_dst_rdy_int2)); - dspengine_16to8 #(.BASE(BASE+9), .BUF_SIZE(FIFOSIZE)) dspengine_16to8 - (.clk(clk),.reset(reset),.clear(clear), - .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + vita_rx_engine_glue #(.DSPNO(DSP_NUMBER), .MAIN_SETTINGS_BASE(BASE+3), .BUF_SIZE(FIFOSIZE)) dspengine_rx + (.clock(clk),.reset(reset),.clear(clear), + .set_stb_main(set_stb), .set_addr_main(set_addr), .set_data_main(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), .access_dat_i(buf_to_dsp), .access_dat_o(dsp_to_buf)); diff --git a/fpga/usrp2/vrt/vita_rx_engine_glue.v b/fpga/usrp2/vrt/vita_rx_engine_glue.v new file mode 100644 index 000000000..56447a7aa --- /dev/null +++ b/fpga/usrp2/vrt/vita_rx_engine_glue.v @@ -0,0 +1,95 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//The following module is used to re-write receive packets to the host. +//This module provides a packet-based ram interface for manipulating packets. +//By default, this module uses the built-in 16 to 8 bit converter engine. + +module vita_rx_engine_glue +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //buffer size for ram interface engine + parameter BUF_SIZE = 10, + + //base address for built-in settings registers used in this module + parameter MAIN_SETTINGS_BASE = 0 +) +( + //control signals + input clock, input reset, input clear, + + //main settings bus for built-in modules + input set_stb_main, input [7:0] set_addr_main, input [31:0] set_data_main, + + //user settings bus, controlled through user setting regs API + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, + + //ram interface for engine + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i, + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef RX_ENG0_MODULE + dspengine_16to8 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE)) dspengine_16to8 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + `RX_ENG0_MODULE #(.BUF_SIZE(BUF_SIZE)) rx_eng0_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + else begin + `ifndef RX_ENG1_MODULE + dspengine_16to8 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE)) dspengine_16to8 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + `RX_ENG1_MODULE #(.BUF_SIZE(BUF_SIZE)) rx_eng1_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + endgenerate + +endmodule //vita_rx_engine_glue diff --git a/fpga/usrp2/vrt/vita_rx_framer.v b/fpga/usrp2/vrt/vita_rx_framer.v index bd09315bc..514df1151 100644 --- a/fpga/usrp2/vrt/vita_rx_framer.v +++ b/fpga/usrp2/vrt/vita_rx_framer.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -93,18 +93,16 @@ module vita_rx_framer localparam VITA_IDLE = 0; localparam VITA_HEADER = 1; localparam VITA_STREAMID = 2; - localparam VITA_SECS = 3; - localparam VITA_TICS = 4; - localparam VITA_TICS2 = 5; - localparam VITA_PAYLOAD = 6; - localparam VITA_TRAILER = 7; - localparam VITA_ERR_HEADER = 9; // All ERR at 4'b1000 or'ed with base - localparam VITA_ERR_STREAMID = 10; - localparam VITA_ERR_SECS = 11; - localparam VITA_ERR_TICS = 12; - localparam VITA_ERR_TICS2 = 13; - localparam VITA_ERR_PAYLOAD = 14; - localparam VITA_ERR_TRAILER = 15; // Extension context packets have no trailer + localparam VITA_TICS = 3; + localparam VITA_TICS2 = 4; + localparam VITA_PAYLOAD = 5; + localparam VITA_TRAILER = 6; + localparam VITA_ERR_HEADER = 7; // All ERR at 4'b1000 or'ed with base + localparam VITA_ERR_STREAMID = 8; + localparam VITA_ERR_TICS = 9; + localparam VITA_ERR_TICS2 = 10; + localparam VITA_ERR_PAYLOAD = 11; + localparam VITA_ERR_TRAILER = 12; // Extension context packets have no trailer always @(posedge clk) if(reset | clear | clear_pkt_count) @@ -122,17 +120,15 @@ module vita_rx_framer VITA_HEADER : pkt_fifo_line <= {2'b01,3'b000,vita_header[28],2'b01,vita_header[25:24], vita_header[23:20],pkt_count[3:0],vita_pkt_len[15:0]}; VITA_STREAMID : pkt_fifo_line <= {2'b00,vita_streamid}; - VITA_SECS : pkt_fifo_line <= {2'b00,vita_time_fifo_o[63:32]}; - VITA_TICS : pkt_fifo_line <= {2'b00,32'd0}; + VITA_TICS : pkt_fifo_line <= {2'b00,vita_time_fifo_o[63:32]}; VITA_TICS2 : pkt_fifo_line <= {2'b00,vita_time_fifo_o[31:0]}; VITA_PAYLOAD : pkt_fifo_line <= {2'b00,data_fifo_o}; VITA_TRAILER : pkt_fifo_line <= {2'b10,vita_trailer[31:21],1'b1,vita_trailer[19:9],trl_eob,8'd0}; // Error packets are Extension Context packets, which have no trailer - VITA_ERR_HEADER : pkt_fifo_line <= {2'b01,4'b0101,4'b0000,vita_header[23:20],pkt_count,16'd6}; + VITA_ERR_HEADER : pkt_fifo_line <= {2'b01,4'b0101,4'b0000,vita_header[23:20],pkt_count,16'd5}; VITA_ERR_STREAMID : pkt_fifo_line <= {2'b00,vita_streamid}; - VITA_ERR_SECS : pkt_fifo_line <= {2'b00,vita_time_fifo_o[63:32]}; - VITA_ERR_TICS : pkt_fifo_line <= {2'b00,32'd0}; + VITA_ERR_TICS : pkt_fifo_line <= {2'b00,vita_time_fifo_o[63:32]}; VITA_ERR_TICS2 : pkt_fifo_line <= {2'b00,vita_time_fifo_o[31:0]}; VITA_ERR_PAYLOAD : pkt_fifo_line <= {2'b10,27'd0,flags_fifo_o}; //VITA_ERR_TRAILER : pkt_fifo_line <= {2'b11,vita_trailer}; @@ -164,7 +160,7 @@ module vita_rx_framer if(has_streamid) vita_state <= VITA_STREAMID; else - vita_state <= VITA_SECS; + vita_state <= VITA_TICS; VITA_PAYLOAD : if(sample_fifo_src_rdy_i) begin @@ -194,12 +190,12 @@ module vita_rx_framer case(vita_state) VITA_IDLE : req_write_pkt_fifo <= 0; - VITA_HEADER, VITA_STREAMID, VITA_SECS, VITA_TICS, VITA_TICS2, VITA_TRAILER : + VITA_HEADER, VITA_STREAMID, VITA_TICS, VITA_TICS2, VITA_TRAILER : req_write_pkt_fifo <= 1; VITA_PAYLOAD : // Write if sample ready and no error flags req_write_pkt_fifo <= (sample_fifo_src_rdy_i & ~|flags_fifo_o[4:1]); - VITA_ERR_HEADER, VITA_ERR_STREAMID, VITA_ERR_SECS, VITA_ERR_TICS, VITA_ERR_TICS2, VITA_ERR_PAYLOAD : + VITA_ERR_HEADER, VITA_ERR_STREAMID, VITA_ERR_TICS, VITA_ERR_TICS2, VITA_ERR_PAYLOAD : req_write_pkt_fifo <= 1; default : req_write_pkt_fifo <= 0; diff --git a/fpga/usrp2/vrt/vita_tx_chain.v b/fpga/usrp2/vrt/vita_tx_chain.v index ac9f08fc8..82a43d57a 100644 --- a/fpga/usrp2/vrt/vita_tx_chain.v +++ b/fpga/usrp2/vrt/vita_tx_chain.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -17,8 +17,9 @@ module vita_tx_chain - #(parameter BASE_CTRL=0, - parameter BASE_DSP=0, + #(parameter BASE=0, + parameter FIFOSIZE=10, + parameter POST_ENGINE_FIFOSIZE=10, parameter REPORT_ERROR=0, parameter DO_FLOW_CONTROL=0, parameter PROT_ENG_FLAGS=0, @@ -26,11 +27,12 @@ module vita_tx_chain parameter DSP_NUMBER=0) (input clk, input reset, input set_stb, input [7:0] set_addr, input [31:0] set_data, + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, input [63:0] vita_time, input [35:0] tx_data_i, input tx_src_rdy_i, output tx_dst_rdy_o, output [35:0] err_data_o, output err_src_rdy_o, input err_dst_rdy_i, - output [23:0] tx_i, output [23:0] tx_q, - output underrun, output run, + output [31:0] sample, input strobe, + output underrun, output run, output clear_o, output [31:0] debug); localparam MAXCHAN = 1; @@ -38,8 +40,6 @@ module vita_tx_chain wire [FIFOWIDTH-1:0] tx1_data; wire tx1_src_rdy, tx1_dst_rdy; - wire clear_vita; - wire [31:0] sample_tx; wire [31:0] streamid, message; wire trigger, sent; wire [31:0] debug_vtc, debug_vtd, debug_tx_dsp; @@ -48,61 +48,104 @@ module vita_tx_chain wire [31:0] error_code; wire clear_seqnum; wire [31:0] current_seqnum; - wire strobe_tx; - + + wire clear, flush; + assign clear_o = clear; assign underrun = error; assign message = error_code; - - setting_reg #(.my_addr(BASE_CTRL+1)) sr + + setting_reg #(.my_addr(BASE+0), .width(1)) sr (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_vita)); + .in(set_data),.out(flush),.changed(clear)); - setting_reg #(.my_addr(BASE_CTRL+2), .at_reset(0)) sr_streamid + setting_reg #(.my_addr(BASE+2), .at_reset(0)) sr_streamid (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(streamid),.changed(clear_seqnum)); - vita_tx_deframer #(.BASE(BASE_CTRL), + //flush control - full rate vacuum of input until flush cleared + wire tx_dst_rdy_int, tx_src_rdy_int; + wire [35:0] tx_data_int; + valve36 flusher_valve + (.clk(clk), .reset(reset), .clear(clear & flush), .shutoff(flush), + .data_i(tx_data_i), .src_rdy_i(tx_src_rdy_i), .dst_rdy_o(tx_dst_rdy_o), + .data_o(tx_data_int), .src_rdy_o(tx_src_rdy_int), .dst_rdy_i(tx_dst_rdy_int)); + + wire [35:0] tx_data_int1; + wire tx_src_rdy_int1, tx_dst_rdy_int1; + + generate + if (FIFOSIZE==0) begin + assign tx_data_int1 = tx_data_int; + assign tx_src_rdy_int1 = tx_src_rdy_int; + assign tx_dst_rdy_int = tx_dst_rdy_int1; + end + else begin + wire [FIFOSIZE-1:0] access_adr, access_len; + wire access_we, access_stb, access_ok, access_done, access_skip_read; + wire [35:0] dsp_to_buf, buf_to_dsp; + wire [35:0] tx_data_int0; + wire tx_src_rdy_int0, tx_dst_rdy_int0; + + double_buffer #(.BUF_SIZE(FIFOSIZE)) db + (.clk(clk),.reset(reset),.clear(clear), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(dsp_to_buf), .access_dat_o(buf_to_dsp), + + .data_i(tx_data_int), .src_rdy_i(tx_src_rdy_int), .dst_rdy_o(tx_dst_rdy_int), + .data_o(tx_data_int0), .src_rdy_o(tx_src_rdy_int0), .dst_rdy_i(tx_dst_rdy_int0)); + + vita_tx_engine_glue #(.DSPNO(DSP_NUMBER), .MAIN_SETTINGS_BASE(BASE+1), .BUF_SIZE(FIFOSIZE), .HEADER_OFFSET(USE_TRANS_HEADER)) dspengine_tx + (.clock(clk),.reset(reset),.clear(clear), + .set_stb_main(set_stb), .set_addr_main(set_addr), .set_data_main(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(buf_to_dsp), .access_dat_o(dsp_to_buf)); + + fifo_cascade #(.WIDTH(36), .SIZE(POST_ENGINE_FIFOSIZE)) post_engine_buffering( + .clk(clk), .reset(reset), .clear(clear), + .datain(tx_data_int0), .src_rdy_i(tx_src_rdy_int0), .dst_rdy_o(tx_dst_rdy_int0), + .dataout(tx_data_int1), .src_rdy_o(tx_src_rdy_int1), .dst_rdy_i(tx_dst_rdy_int1)); + + end + endgenerate + + vita_tx_deframer #(.BASE(BASE), .MAXCHAN(MAXCHAN), .USE_TRANS_HEADER(USE_TRANS_HEADER)) vita_tx_deframer - (.clk(clk), .reset(reset), .clear(clear_vita), .clear_seqnum(clear_seqnum), + (.clk(clk), .reset(reset), .clear(clear), .clear_seqnum(clear_seqnum), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .data_i(tx_data_i), .src_rdy_i(tx_src_rdy_i), .dst_rdy_o(tx_dst_rdy_o), + .data_i(tx_data_int1), .src_rdy_i(tx_src_rdy_int1), .dst_rdy_o(tx_dst_rdy_int1), .sample_fifo_o(tx1_data), .sample_fifo_src_rdy_o(tx1_src_rdy), .sample_fifo_dst_rdy_i(tx1_dst_rdy), .current_seqnum(current_seqnum), .debug(debug_vtd) ); - vita_tx_control #(.BASE(BASE_CTRL), .WIDTH(32*MAXCHAN)) vita_tx_control - (.clk(clk), .reset(reset), .clear(clear_vita), + vita_tx_control #(.BASE(BASE), .WIDTH(32*MAXCHAN)) vita_tx_control + (.clk(clk), .reset(reset), .clear(clear), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .error(error), .ack(ack), .error_code(error_code), .sample_fifo_i(tx1_data), .sample_fifo_src_rdy_i(tx1_src_rdy), .sample_fifo_dst_rdy_o(tx1_dst_rdy), - .sample(sample_tx), .run(run), .strobe(strobe_tx), .packet_consumed(packet_consumed), + .sample(sample), .run(run), .strobe(strobe), .packet_consumed(packet_consumed), .debug(debug_vtc) ); - - dsp_core_tx #(.BASE(BASE_DSP)) dsp_core_tx - (.clk(clk),.rst(reset), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .sample(sample_tx), .run(run), .strobe(strobe_tx), - .tx_i(tx_i),.tx_q(tx_q), - .debug(debug_tx_dsp) ); wire [35:0] flow_data, err_data_int; wire flow_src_rdy, flow_dst_rdy, err_src_rdy_int, err_dst_rdy_int; gen_context_pkt #(.PROT_ENG_FLAGS(PROT_ENG_FLAGS),.DSP_NUMBER(DSP_NUMBER)) gen_flow_pkt - (.clk(clk), .reset(reset), .clear(clear_vita), + (.clk(clk), .reset(reset), .clear(clear), .trigger(trigger & (DO_FLOW_CONTROL==1)), .sent(), .streamid(streamid), .vita_time(vita_time), .message(32'd0), .seqnum(current_seqnum), .data_o(flow_data), .src_rdy_o(flow_src_rdy), .dst_rdy_i(flow_dst_rdy)); - trigger_context_pkt #(.BASE(BASE_CTRL)) trigger_context_pkt - (.clk(clk), .reset(reset), .clear(clear_vita), + trigger_context_pkt #(.BASE(BASE)) trigger_context_pkt + (.clk(clk), .reset(reset), .clear(clear), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .packet_consumed(packet_consumed), .trigger(trigger)); gen_context_pkt #(.PROT_ENG_FLAGS(PROT_ENG_FLAGS),.DSP_NUMBER(DSP_NUMBER)) gen_tx_err_pkt - (.clk(clk), .reset(reset), .clear(clear_vita), + (.clk(clk), .reset(reset), .clear(clear), .trigger((error|ack) & (REPORT_ERROR==1)), .sent(), .streamid(streamid), .vita_time(vita_time), .message(message), .seqnum(current_seqnum), diff --git a/fpga/usrp2/vrt/vita_tx_control.v b/fpga/usrp2/vrt/vita_tx_control.v index 5df89bdbe..c3ce2b96a 100644 --- a/fpga/usrp2/vrt/vita_tx_control.v +++ b/fpga/usrp2/vrt/vita_tx_control.v @@ -50,11 +50,9 @@ module vita_tx_control wire now, early, late, too_early; - // FIXME ignore too_early for now for timing reasons - assign too_early = 0; time_compare time_compare (.time_now(vita_time), .trigger_time(send_time), - .now(now), .early(early), .late(late), .too_early()); + .now(now), .early(early), .late(late), .too_early(too_early)); reg late_qual, late_del; @@ -187,8 +185,17 @@ module vita_tx_control assign sample_fifo_dst_rdy_o = (ibs_state == IBS_ERROR) | (strobe & (ibs_state == IBS_RUN)); // FIXME also cleanout - assign sample = (ibs_state == IBS_RUN) ? sample_fifo_i[5+64+16+WIDTH-1:5+64+16] : {WIDTH{1'b0}}; - //assign run = (ibs_state == IBS_RUN) | (ibs_state == IBS_CONT_BURST); + //register the output sample + reg [31:0] sample_held; + assign sample = sample_held; + always @(posedge clk) + if(reset | clear) + sample_held <= 0; + else if (~run) + sample_held <= 0; + else if (strobe) + sample_held <= sample_fifo_i[5+64+16+WIDTH-1:5+64+16]; + assign error = send_error; assign ack = send_ack; diff --git a/fpga/usrp2/vrt/vita_tx_deframer.v b/fpga/usrp2/vrt/vita_tx_deframer.v index 06ca27767..6919da11a 100644 --- a/fpga/usrp2/vrt/vita_tx_deframer.v +++ b/fpga/usrp2/vrt/vita_tx_deframer.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -85,7 +85,6 @@ module vita_tx_deframer localparam VITA_TICS = 6; localparam VITA_TICS2 = 7; localparam VITA_PAYLOAD = 8; - localparam VITA_STORE = 9; localparam VITA_TRAILER = 10; localparam VITA_DUMP = 11; @@ -118,21 +117,7 @@ module vita_tx_deframer <= 0; seqnum_err <= 0; end - else - if((vita_state == VITA_STORE) & fifo_space) - if(vita_eof) - if(eof) - vita_state <= (USE_TRANS_HEADER==1) ? VITA_TRANS_HEADER : VITA_HEADER; - else if(has_trailer_reg) - vita_state <= VITA_TRAILER; - else - vita_state <= VITA_DUMP; - else - begin - vita_state <= VITA_PAYLOAD; - pkt_len <= pkt_len - 1; - end - else if(src_rdy_i) + else if(src_rdy_i & dst_rdy_o) begin //valid read case(vita_state) VITA_TRANS_HEADER : begin @@ -184,14 +169,33 @@ module vita_tx_deframer vita_state <= VITA_TICS2; VITA_TICS2 : vita_state <= VITA_PAYLOAD; - VITA_PAYLOAD : - if(line_done) - begin - vector_phase <= 0; - vita_state <= VITA_STORE; - end - else - vector_phase <= vector_phase + 1; + + VITA_PAYLOAD : begin + + //step through each element until line done, then reset + vector_phase <= (line_done)? 0: vector_phase + 1; + + //decrement the packet count after each line + pkt_len <= (line_done)? pkt_len - 1 : pkt_len; + + //end of frame reached, determine next state + //otherwise, keep processing through the payload + if (line_done && vita_eof) begin + + if (eof) begin + vita_state <= (USE_TRANS_HEADER==1) ? VITA_TRANS_HEADER : VITA_HEADER; + end + else if (has_trailer_reg) begin + vita_state <= VITA_TRAILER; + end + else begin + vita_state <= VITA_DUMP; + end + + end //line_done && vita_eof + + end //end VITA_PAYLOAD + VITA_TRAILER : if(eof) vita_state <= (USE_TRANS_HEADER==1) ? VITA_TRANS_HEADER : VITA_HEADER; @@ -200,46 +204,53 @@ module vita_tx_deframer VITA_DUMP : if(eof) vita_state <= (USE_TRANS_HEADER==1) ? VITA_TRANS_HEADER : VITA_HEADER; - VITA_STORE : - ; default : vita_state <= (USE_TRANS_HEADER==1) ? VITA_TRANS_HEADER : VITA_HEADER; endcase // case (vita_state) - assign line_done = (vector_phase == numchan); + end //valid read + + assign line_done = (MAXCHAN == 1)? 1 : (vector_phase == numchan); wire [FIFOWIDTH-1:0] fifo_i; reg [63:0] send_time; - reg [31:0] sample_a, sample_b, sample_c, sample_d; always @(posedge clk) case(vita_state) - VITA_SECS : + VITA_TICS : send_time[63:32] <= data_i[31:0]; VITA_TICS2 : send_time[31:0] <= data_i[31:0]; endcase // case (vita_state) - + + //sample registers for de-framing a vector input + reg [31:0] sample_reg [1:0]; always @(posedge clk) - if(vita_state == VITA_PAYLOAD) - case(vector_phase) - 0: sample_a <= data_i[31:0]; - 1: sample_b <= data_i[31:0]; - 2: sample_c <= data_i[31:0]; - 3: sample_d <= data_i[31:0]; - endcase // case (vector_phase) - - wire store = (vita_state == VITA_STORE); + if(src_rdy_i && dst_rdy_o) + sample_reg[vector_phase] <= data_i[31:0]; + + wire store = (vita_state == VITA_PAYLOAD)? (src_rdy_i && line_done) : 0; + assign dst_rdy_o = (vita_state == VITA_PAYLOAD)? fifo_space : 1; + fifo_short #(.WIDTH(FIFOWIDTH)) short_tx_q (.clk(clk), .reset(reset), .clear(clear), .datain(fifo_i), .src_rdy_i(store), .dst_rdy_o(fifo_space), .dataout(sample_fifo_o), .src_rdy_o(sample_fifo_src_rdy_o), .dst_rdy_i(sample_fifo_dst_rdy_i) ); - // sob, eob, has_secs (send_at) ignored on all lines except first - assign fifo_i = {sample_d,sample_c,sample_b,sample_a,seqnum_err,has_secs_reg,is_sob_reg,is_eob_reg,eop, - 12'd0,seqnum_reg[3:0],send_time}; + //assign registered/live data to the samples vector + //the numchan'th sample vector is muxed to live data + wire [(32*MAXCHAN)-1:0] samples; + generate + genvar i; + for (i=0; i < MAXCHAN; i = i +1) begin : assign_samples + wire live_data = (i == (MAXCHAN-1))? 1 : numchan == i; + assign samples[32*i + 31:32*i] = (live_data)? data_i[31:0] : sample_reg[i]; + end + endgenerate - assign dst_rdy_o = ~(vita_state == VITA_PAYLOAD) & ~((vita_state==VITA_STORE)& ~fifo_space) ; + // sob, eob, has_tics (send_at) ignored on all lines except first + assign fifo_i = {samples,seqnum_err,has_tics_reg,is_sob_reg,is_eob_reg,eop, + 12'd0,seqnum_reg[3:0],send_time}; assign debug = { { 8'b0 }, { 8'b0 }, diff --git a/fpga/usrp2/vrt/vita_tx_engine_glue.v b/fpga/usrp2/vrt/vita_tx_engine_glue.v new file mode 100644 index 000000000..db0d55dee --- /dev/null +++ b/fpga/usrp2/vrt/vita_tx_engine_glue.v @@ -0,0 +1,99 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +//The following module is used to re-write transmit packets from the host. +//This module provides a packet-based ram interface for manipulating packets. +//By default, this module uses the built-in 8 to 16 bit converter engine. + +module vita_tx_engine_glue +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //buffer size for ram interface engine + parameter BUF_SIZE = 10, + + //base address for built-in settings registers used in this module + parameter MAIN_SETTINGS_BASE = 0, + + //the number of 32bit lines between start of buffer and vita header + //the metadata before the header should be preserved by the engine + parameter HEADER_OFFSET = 0 +) +( + //control signals + input clock, input reset, input clear, + + //main settings bus for built-in modules + input set_stb_main, input [7:0] set_addr_main, input [31:0] set_data_main, + + //user settings bus, controlled through user setting regs API + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, + + //ram interface for engine + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i, + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef TX_ENG0_MODULE + dspengine_8to16 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) dspengine_8to16 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + `TX_ENG0_MODULE #(.BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) tx_eng0_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + else begin + `ifndef TX_ENG1_MODULE + dspengine_8to16 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) dspengine_8to16 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + `TX_ENG1_MODULE #(.BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) tx_eng1_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + endgenerate + +endmodule //vita_tx_engine_glue |