aboutsummaryrefslogtreecommitdiffstats
path: root/fpga
diff options
context:
space:
mode:
Diffstat (limited to 'fpga')
-rw-r--r--fpga/usrp3/top/e31x/Makefile.e31x.inc3
-rw-r--r--fpga/usrp3/top/e31x/e31x.v20
-rw-r--r--fpga/usrp3/top/e31x/e31x_core.v7
-rw-r--r--fpga/usrp3/top/e320/Makefile.e320.inc3
-rw-r--r--fpga/usrp3/top/e320/e320.v21
-rw-r--r--fpga/usrp3/top/e320/e320_core.v7
-rw-r--r--fpga/usrp3/top/n3xx/Makefile12
-rw-r--r--fpga/usrp3/top/n3xx/Makefile.n3xx.inc3
-rw-r--r--fpga/usrp3/top/n3xx/dboards/mg/n3xx.v19
-rw-r--r--fpga/usrp3/top/n3xx/dboards/rh/n3xx.v19
-rw-r--r--fpga/usrp3/top/n3xx/n3xx_core.v9
-rw-r--r--fpga/usrp3/top/x300/Makefile.x300.inc3
-rw-r--r--fpga/usrp3/top/x300/bus_int.v14
13 files changed, 113 insertions, 27 deletions
diff --git a/fpga/usrp3/top/e31x/Makefile.e31x.inc b/fpga/usrp3/top/e31x/Makefile.e31x.inc
index 4e017ca0c..871dd5318 100644
--- a/fpga/usrp3/top/e31x/Makefile.e31x.inc
+++ b/fpga/usrp3/top/e31x/Makefile.e31x.inc
@@ -107,13 +107,14 @@ $(RFNOC_BLOCK_EXAMPLE_SRCS) \
$(abspath $(MB_XDC))
EDGE_TBL_DEF="RFNOC_EDGE_TBL_FILE=$(call RESOLVE_PATH,$(EDGE_FILE))"
+IMAGE_CORE_DEF="RFNOC_IMAGE_CORE_HDR=$(call RESOLVE_PATH,$(IMAGE_CORE:.v=.vh))"
##################################################
# Dependency Targets
##################################################
.SECONDEXPANSION:
-VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF)
+VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF) $(IMAGE_CORE_DEF)
# DESIGN_SRCS and VERILOG_DEFS must be defined
bin: .prereqs $$(DESIGN_SRCS) ip
diff --git a/fpga/usrp3/top/e31x/e31x.v b/fpga/usrp3/top/e31x/e31x.v
index 57c1346ff..9ca3db62e 100644
--- a/fpga/usrp3/top/e31x/e31x.v
+++ b/fpga/usrp3/top/e31x/e31x.v
@@ -136,6 +136,22 @@ module e31x (
inout [5:0] PL_GPIO
);
+ // Include the RFNoC image core header file
+ `ifdef RFNOC_IMAGE_CORE_HDR
+ `include `"`RFNOC_IMAGE_CORE_HDR`"
+ `else
+ ERROR_RFNOC_IMAGE_CORE_HDR_not_defined();
+ `define CHDR_WIDTH 64
+ `define RFNOC_PROTOVER { 8'd1, 8'd0 }
+ `endif
+ localparam CHDR_W = `CHDR_WIDTH;
+ localparam RFNOC_PROTOVER = `RFNOC_PROTOVER;
+
+ // This USRP currently only supports 64-bit CHDR width
+ if (CHDR_W != 64) begin : gen_chdr_w_error
+ CHDR_W_must_be_64_for_this_USRP();
+ end
+
// Constants
localparam REG_AWIDTH = 14; // log2(0x4000)
localparam REG_DWIDTH = 32;
@@ -846,7 +862,9 @@ module e31x (
.NUM_DBOARDS(NUM_DBOARDS),
.NUM_CHANNELS_PER_DBOARD(NUM_CHANNELS_PER_RADIO),
.FP_GPIO_WIDTH(FP_GPIO_WIDTH),
- .DB_GPIO_WIDTH(DB_GPIO_WIDTH)
+ .DB_GPIO_WIDTH(DB_GPIO_WIDTH),
+ .CHDR_W(CHDR_W),
+ .RFNOC_PROTOVER(RFNOC_PROTOVER)
) e31x_core_inst (
//Clocks and resets
diff --git a/fpga/usrp3/top/e31x/e31x_core.v b/fpga/usrp3/top/e31x/e31x_core.v
index 99675262b..43bb59799 100644
--- a/fpga/usrp3/top/e31x/e31x_core.v
+++ b/fpga/usrp3/top/e31x/e31x_core.v
@@ -26,7 +26,7 @@ module e31x_core #(
parameter NUM_CHANNELS_PER_DBOARD = 2,
parameter FP_GPIO_WIDTH = 8, // Front panel GPIO width
parameter DB_GPIO_WIDTH = 16, // Daughterboard GPIO width
- parameter CHDR_WIDTH = 16'd64 ,
+ parameter CHDR_W = 64,
parameter RFNOC_PROTOVER = {8'd1, 8'd0}
)(
// Clocks and resets
@@ -414,7 +414,7 @@ module e31x_core #(
cp_glob_resp_data <= {16'd0, device_id};
REG_RFNOC_INFO:
- cp_glob_resp_data <= {CHDR_WIDTH[15:0], RFNOC_PROTOVER[15:0]};
+ cp_glob_resp_data <= {CHDR_W[15:0], RFNOC_PROTOVER[15:0]};
REG_COMPAT_NUM:
cp_glob_resp_data <= {COMPAT_MAJOR[15:0], COMPAT_MINOR[15:0]};
@@ -812,7 +812,8 @@ module e31x_core #(
/////////////////////////////////////////////////////////////////////////////
rfnoc_image_core #(
- .PROTOVER(RFNOC_PROTOVER)
+ .CHDR_W (CHDR_W),
+ .PROTOVER (RFNOC_PROTOVER)
) rfnoc_image_core_i (
.chdr_aclk (bus_clk ),
.ctrl_aclk (clk40 ),
diff --git a/fpga/usrp3/top/e320/Makefile.e320.inc b/fpga/usrp3/top/e320/Makefile.e320.inc
index b8544f3cd..c546b7919 100644
--- a/fpga/usrp3/top/e320/Makefile.e320.inc
+++ b/fpga/usrp3/top/e320/Makefile.e320.inc
@@ -120,13 +120,14 @@ $(RFNOC_BLOCK_RADIO_SRCS) \
$(abspath $(MB_XDC))
EDGE_TBL_DEF="RFNOC_EDGE_TBL_FILE=$(call RESOLVE_PATH,$(EDGE_FILE))"
+IMAGE_CORE_DEF="RFNOC_IMAGE_CORE_HDR=$(call RESOLVE_PATH,$(IMAGE_CORE:.v=.vh))"
##################################################
# Dependency Targets
##################################################
.SECONDEXPANSION:
-VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF)
+VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF) $(IMAGE_CORE_DEF)
# DESIGN_SRCS and VERILOG_DEFS must be defined
bin: .prereqs $$(DESIGN_SRCS) ip
diff --git a/fpga/usrp3/top/e320/e320.v b/fpga/usrp3/top/e320/e320.v
index 501f6a06d..f16d1877f 100644
--- a/fpga/usrp3/top/e320/e320.v
+++ b/fpga/usrp3/top/e320/e320.v
@@ -175,6 +175,22 @@ module e320 (
);
+ // Include the RFNoC image core header file
+ `ifdef RFNOC_IMAGE_CORE_HDR
+ `include `"`RFNOC_IMAGE_CORE_HDR`"
+ `else
+ ERROR_RFNOC_IMAGE_CORE_HDR_not_defined();
+ `define CHDR_WIDTH 64
+ `define RFNOC_PROTOVER { 8'd1, 8'd0 }
+ `endif
+ localparam CHDR_W = `CHDR_WIDTH;
+ localparam RFNOC_PROTOVER = `RFNOC_PROTOVER;
+
+ // This USRP currently only supports 64-bit CHDR width
+ if (CHDR_W != 64) begin : gen_chdr_w_error
+ CHDR_W_must_be_64_for_this_USRP();
+ end
+
`ifdef SFP_1GBE
parameter PROTOCOL = "1GbE";
parameter MDIO_EN = 1'b1;
@@ -207,7 +223,6 @@ module e320 (
localparam NUM_CHANNELS_PER_RADIO = 2;
localparam NUM_DBOARDS = 1;
localparam NUM_CHANNELS = NUM_RADIOS * NUM_CHANNELS_PER_RADIO;
- localparam [15:0] RFNOC_PROTOVER = {8'd1, 8'd0};
// Clocks
wire xgige_clk156;
@@ -1690,7 +1705,9 @@ module e320 (
.NUM_CHANNELS(NUM_CHANNELS),
.NUM_DBOARDS(NUM_DBOARDS),
.FP_GPIO_WIDTH(FP_GPIO_WIDTH),
- .DB_GPIO_WIDTH(DB_GPIO_WIDTH)
+ .DB_GPIO_WIDTH(DB_GPIO_WIDTH),
+ .CHDR_W(CHDR_W),
+ .RFNOC_PROTOVER(RFNOC_PROTOVER)
) e320_core_i (
//Clocks and resets
diff --git a/fpga/usrp3/top/e320/e320_core.v b/fpga/usrp3/top/e320/e320_core.v
index a63bdda91..a49f28bf1 100644
--- a/fpga/usrp3/top/e320/e320_core.v
+++ b/fpga/usrp3/top/e320/e320_core.v
@@ -25,7 +25,7 @@ module e320_core #(
parameter NUM_CHANNELS_PER_DBOARD = 2,
parameter FP_GPIO_WIDTH = 8, // Front panel GPIO width
parameter DB_GPIO_WIDTH = 16, // Daughterboard GPIO width
- parameter CHDR_WIDTH = 16'd64 ,
+ parameter CHDR_W = 64,
parameter RFNOC_PROTOVER = {8'd1, 8'd0}
)(
// Clocks and resets
@@ -468,7 +468,7 @@ module e320_core #(
cp_glob_resp_data <= { 16'd0, device_id };
REG_RFNOC_INFO:
- cp_glob_resp_data <= {CHDR_WIDTH[15:0], RFNOC_PROTOVER[15:0]};
+ cp_glob_resp_data <= {CHDR_W[15:0], RFNOC_PROTOVER[15:0]};
REG_COMPAT_NUM:
cp_glob_resp_data <= {COMPAT_MAJOR[15:0], COMPAT_MINOR[15:0]};
@@ -1028,7 +1028,8 @@ module e320_core #(
end
rfnoc_image_core #(
- .PROTOVER(RFNOC_PROTOVER)
+ .CHDR_W (CHDR_W),
+ .PROTOVER (RFNOC_PROTOVER)
) rfnoc_sandbox_i (
.chdr_aclk (bus_clk ),
.ctrl_aclk (clk40 ),
diff --git a/fpga/usrp3/top/n3xx/Makefile b/fpga/usrp3/top/n3xx/Makefile
index f1aef0c68..8bbe2dd42 100644
--- a/fpga/usrp3/top/n3xx/Makefile
+++ b/fpga/usrp3/top/n3xx/Makefile
@@ -34,12 +34,12 @@ XQ_DEFS=SFP0_WR=1 QSFP_10GBE=1 USE_REPLAY=1 BUILD_WR=1 BUILD_10G=1
AQ_DEFS=SFP0_10GBE=1 SFP1_10GBE=1 QSFP_AURORA=1 USE_REPLAY=1 BUILD_10G=1 BUILD_AURORA=1 QSFP_LANES=4 $(OPTIONS)
# Defaults specific to the various targets:
-N300_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n300_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath n300_static_router.hex)
-N310_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n310_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath n310_static_router.hex)
-N320_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n320_rfnoc_image_core.v DEFAULT_EDGE_FILE=$(abspath n320_static_router.hex)
-N300AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n300_bist_image_core.v DEFAULT_EDGE_FILE=$(abspath n300_bist_static_router.hex)
-N310AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n310_bist_image_core.v DEFAULT_EDGE_FILE=$(abspath n310_bist_static_router.hex)
-N320AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=n320_bist_image_core.v DEFAULT_EDGE_FILE=$(abspath n320_bist_static_router.hex)
+N300_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n300_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n300_static_router.hex)
+N310_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n310_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n310_static_router.hex)
+N320_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n320_rfnoc_image_core.v) DEFAULT_EDGE_FILE=$(abspath n320_static_router.hex)
+N300AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n300_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n300_bist_static_router.hex)
+N310AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n310_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n310_bist_static_router.hex)
+N320AA_DEFAULTS:=DEFAULT_RFNOC_IMAGE_CORE_FILE=$(abspath n320_bist_image_core.v) DEFAULT_EDGE_FILE=$(abspath n320_bist_static_router.hex)
# Set build option (check RTL, run synthesis, or do a full build)
ifndef TARGET
diff --git a/fpga/usrp3/top/n3xx/Makefile.n3xx.inc b/fpga/usrp3/top/n3xx/Makefile.n3xx.inc
index 23258b209..b37f84882 100644
--- a/fpga/usrp3/top/n3xx/Makefile.n3xx.inc
+++ b/fpga/usrp3/top/n3xx/Makefile.n3xx.inc
@@ -142,13 +142,14 @@ $(RFNOC_BLOCK_RADIO_SRCS) \
$(RFNOC_BLOCK_REPLAY_SRCS)
EDGE_TBL_DEF="RFNOC_EDGE_TBL_FILE=$(call RESOLVE_PATH,$(EDGE_FILE))"
+IMAGE_CORE_DEF="RFNOC_IMAGE_CORE_HDR=$(call RESOLVE_PATH,$(IMAGE_CORE:.v=.vh))"
##################################################
# Dependency Targets
##################################################
.SECONDEXPANSION:
-VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF)
+VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF) $(IMAGE_CORE_DEF)
# DESIGN_SRCS and VERILOG_DEFS must be defined
bin: .prereqs $$(DESIGN_SRCS) ip
diff --git a/fpga/usrp3/top/n3xx/dboards/mg/n3xx.v b/fpga/usrp3/top/n3xx/dboards/mg/n3xx.v
index d9104f412..daa3ca90e 100644
--- a/fpga/usrp3/top/n3xx/dboards/mg/n3xx.v
+++ b/fpga/usrp3/top/n3xx/dboards/mg/n3xx.v
@@ -315,6 +315,22 @@ module n3xx (
`endif
);
+ // Include the RFNoC image core header file
+ `ifdef RFNOC_IMAGE_CORE_HDR
+ `include `"`RFNOC_IMAGE_CORE_HDR`"
+ `else
+ ERROR_RFNOC_IMAGE_CORE_HDR_not_defined();
+ `define CHDR_WIDTH 64
+ `define RFNOC_PROTOVER { 8'd1, 8'd0 }
+ `endif
+ localparam CHDR_W = `CHDR_WIDTH;
+ localparam RFNOC_PROTOVER = `RFNOC_PROTOVER;
+
+ // This USRP currently only supports 64-bit CHDR width
+ if (CHDR_W != 64) begin : gen_chdr_w_error
+ CHDR_W_must_be_64_for_this_USRP();
+ end
+
localparam N_AXILITE_SLAVES = 4;
localparam REG_AWIDTH = 14; // log2(0x4000)
localparam QSFP_REG_AWIDTH = 17; // log2(0x20000)
@@ -332,7 +348,6 @@ module n3xx (
localparam NUM_DBOARDS = 1;
`endif
localparam NUM_CHANNELS = NUM_RADIOS * NUM_CHANNELS_PER_RADIO;
- localparam [15:0] RFNOC_PROTOVER = {8'd1, 8'd0};
// Internal connections to PS
// HP0 -- High Performance port 0, FPGA is the master
@@ -3517,6 +3532,8 @@ module n3xx (
.NUM_CHANNELS_PER_RADIO(NUM_CHANNELS_PER_RADIO),
.NUM_CHANNELS(NUM_CHANNELS),
.NUM_DBOARDS(NUM_DBOARDS),
+ .CHDR_W(CHDR_W),
+ .RFNOC_PROTOVER(RFNOC_PROTOVER),
`ifdef USE_REPLAY
.USE_REPLAY(1)
`else
diff --git a/fpga/usrp3/top/n3xx/dboards/rh/n3xx.v b/fpga/usrp3/top/n3xx/dboards/rh/n3xx.v
index 9eedd55b9..e5238f135 100644
--- a/fpga/usrp3/top/n3xx/dboards/rh/n3xx.v
+++ b/fpga/usrp3/top/n3xx/dboards/rh/n3xx.v
@@ -307,6 +307,22 @@ module n3xx (
output DBB_LED_TX
);
+ // Include the RFNoC image core header file
+ `ifdef RFNOC_IMAGE_CORE_HDR
+ `include `"`RFNOC_IMAGE_CORE_HDR`"
+ `else
+ ERROR_RFNOC_IMAGE_CORE_HDR_not_defined();
+ `define CHDR_WIDTH 64
+ `define RFNOC_PROTOVER { 8'd1, 8'd0 }
+ `endif
+ localparam CHDR_W = `CHDR_WIDTH;
+ localparam RFNOC_PROTOVER = `RFNOC_PROTOVER;
+
+ // This USRP currently only supports 64-bit CHDR width
+ if (CHDR_W != 64) begin : gen_chdr_w_error
+ CHDR_W_must_be_64_for_this_USRP();
+ end
+
localparam N_AXILITE_SLAVES = 4;
localparam REG_AWIDTH = 14; // log2(0x4000)
localparam QSFP_REG_AWIDTH = 17; // log2(0x20000)
@@ -320,7 +336,6 @@ module n3xx (
localparam NUM_CHANNELS = NUM_RADIOS * NUM_CHANNELS_PER_RADIO;
localparam CHANNEL_WIDTH = 32;
-
// Internal connections to PS
// HP0 -- High Performance port 0, FPGA is the master
wire [31:0] S_AXI_HP0_AWADDR;
@@ -3447,6 +3462,8 @@ module n3xx (
.NUM_DBOARDS(NUM_DBOARDS),
.NUM_SPI_PER_DBOARD(4),
.USE_CORRECTION(1),
+ .CHDR_W(CHDR_W),
+ .RFNOC_PROTOVER(RFNOC_PROTOVER),
`ifdef USE_REPLAY
.USE_REPLAY(1)
`else
diff --git a/fpga/usrp3/top/n3xx/n3xx_core.v b/fpga/usrp3/top/n3xx/n3xx_core.v
index 406285824..af43966ad 100644
--- a/fpga/usrp3/top/n3xx/n3xx_core.v
+++ b/fpga/usrp3/top/n3xx/n3xx_core.v
@@ -26,8 +26,8 @@ module n3xx_core #(
parameter USE_CORRECTION = 0,
parameter USE_REPLAY = 0, // 1 for Replay block instead of DMA FIFO
parameter FP_GPIO_WIDTH = 12, // Front panel GPIO width
- parameter RFNOC_PROTOVER = {8'd1, 8'd0},
- parameter CHDR_WIDTH = 16'd64
+ parameter CHDR_W = 64,
+ parameter RFNOC_PROTOVER = {8'd1, 8'd0}
)(
// Clocks and resets
input radio_clk,
@@ -535,7 +535,7 @@ module n3xx_core #(
cp_glob_resp_data <= {16'd0, device_id};
REG_RFNOC_INFO:
- cp_glob_resp_data <= {CHDR_WIDTH[15:0], RFNOC_PROTOVER[15:0]};
+ cp_glob_resp_data <= {CHDR_W[15:0], RFNOC_PROTOVER[15:0]};
REG_COMPAT_NUM:
cp_glob_resp_data <= {COMPAT_MAJOR, COMPAT_MINOR};
@@ -1118,7 +1118,8 @@ module n3xx_core #(
rfnoc_image_core #(
- .PROTOVER(RFNOC_PROTOVER)
+ .CHDR_W (CHDR_W),
+ .PROTOVER (RFNOC_PROTOVER)
) rfnoc_sandbox_i (
.chdr_aclk (bus_clk ),
.ctrl_aclk (clk40 ),
diff --git a/fpga/usrp3/top/x300/Makefile.x300.inc b/fpga/usrp3/top/x300/Makefile.x300.inc
index 1f18cbf02..1664869b2 100644
--- a/fpga/usrp3/top/x300/Makefile.x300.inc
+++ b/fpga/usrp3/top/x300/Makefile.x300.inc
@@ -114,13 +114,14 @@ $(RFNOC_BLOCK_REPLAY_SRCS) \
$(RFNOC_OOT_SRCS)
EDGE_TBL_DEF="RFNOC_EDGE_TBL_FILE=$(call RESOLVE_PATH,$(EDGE_FILE))"
+IMAGE_CORE_DEF="RFNOC_IMAGE_CORE_HDR=$(DEFAULT_RFNOC_IMAGE_CORE_FILE:.v=.vh)"
##################################################
# Dependency Targets
##################################################
.SECONDEXPANSION:
-VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF)
+VERILOG_DEFS=$(EXTRA_DEFS) $(CUSTOM_DEFS) $(GIT_HASH_VERILOG_DEF) $(EDGE_TBL_DEF) $(IMAGE_CORE_DEF)
# DESIGN_SRCS and VERILOG_DEFS must be defined
bin: .prereqs $$(DESIGN_SRCS) ip
diff --git a/fpga/usrp3/top/x300/bus_int.v b/fpga/usrp3/top/x300/bus_int.v
index 90f840a4c..e97ff7ef8 100644
--- a/fpga/usrp3/top/x300/bus_int.v
+++ b/fpga/usrp3/top/x300/bus_int.v
@@ -177,7 +177,16 @@ module bus_int #(
localparam COMPAT_MINOR = 16'h0000;
localparam NUM_TIMEKEEPERS = 1;
- localparam [15:0] RFNOC_PROTOVER = {8'd1, 8'd0};
+ // Include the RFNoC image core header file
+ `ifdef RFNOC_IMAGE_CORE_HDR
+ `include `"`RFNOC_IMAGE_CORE_HDR`"
+ `else
+ ERROR_RFNOC_IMAGE_CORE_HDR_not_defined();
+ `define CHDR_WIDTH 64
+ `define RFNOC_PROTOVER { 8'd1, 8'd0 }
+ `endif
+ localparam CHDR_W = `CHDR_WIDTH;
+ localparam RFNOC_PROTOVER = `RFNOC_PROTOVER;
wire [31:0] set_data;
wire [7:0] set_addr;
@@ -733,7 +742,8 @@ module bus_int #(
///////////////////////////////////////////////////////////////////////////
rfnoc_image_core #(
- .PROTOVER(RFNOC_PROTOVER)
+ .CHDR_W (CHDR_W),
+ .PROTOVER (RFNOC_PROTOVER)
) rfnoc_sandbox_i (
.chdr_aclk (clk ),
.ctrl_aclk (clk_div2 ),
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-11 22:07:29 +0000