diff options
Diffstat (limited to 'fpga')
| -rw-r--r-- | fpga/usrp2/fifo/Makefile.srcs | 3 | ||||
| -rw-r--r-- | fpga/usrp2/fifo/packet_padder36.v | 155 | ||||
| -rw-r--r-- | fpga/usrp2/gpif/Makefile.srcs | 2 | ||||
| -rw-r--r-- | fpga/usrp2/gpif/fifo36_to_gpmc16.v | 54 | ||||
| -rw-r--r-- | fpga/usrp2/gpif/gpmc16_to_fifo36.v | 64 | ||||
| -rw-r--r-- | fpga/usrp2/gpif/slave_fifo.v | 613 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/B100.v | 78 | ||||
| -rwxr-xr-x | fpga/usrp2/top/B100/core_compile | 2 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/timing.ucf | 19 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/u1plus_core.v | 655 |
10 files changed, 824 insertions, 821 deletions
diff --git a/fpga/usrp2/fifo/Makefile.srcs b/fpga/usrp2/fifo/Makefile.srcs index 6cbd5cd3f..55ba0be2a 100644 --- a/fpga/usrp2/fifo/Makefile.srcs +++ b/fpga/usrp2/fifo/Makefile.srcs @@ -1,5 +1,5 @@ # -# Copyright 2010 Ettus Research LLC +# Copyright 2010-2012 Ettus Research LLC # ################################################## @@ -38,4 +38,5 @@ packet_generator.v \ packet_verifier32.v \ packet_verifier.v \ fifo19_pad.v \ +packet_padder36.v \ )) diff --git a/fpga/usrp2/fifo/packet_padder36.v b/fpga/usrp2/fifo/packet_padder36.v new file mode 100644 index 000000000..7197b5ea5 --- /dev/null +++ b/fpga/usrp2/fifo/packet_padder36.v @@ -0,0 +1,155 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// The packet padder 36 for use with RX VITA stream output. +// Packet padder understands the concept of USB LUTs, +// and will forward packets through the interface, +// adding zero padding as needed to properly flush. +// The padder will never write a packet across a LUT boundary. +// When flushing, padder writes out zeros until the LUT boundary. +// Requires that the input line0 be a VITA header, and SOF set. +// Flush when the LUT is partially filled and timeout is reached, +// or when the LUT is partially filled and the DSP is inactive. + +module packet_padder36 +#( + parameter BASE = 0, + + //default is 16K LUT + parameter DEFAULT_LINES32 = 4096, + + //default about 1ms at 64MHz clock + parameter DEFAULT_IDLE_CYC = 65536 +) +( + input clk, input reset, + + //setting bus + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + //input interface + input [35:0] data_i, + input src_rdy_i, + output dst_rdy_o, + + //output interface + output [35:0] data_o, + output src_rdy_o, + input dst_rdy_i, + + input always_flush +); + + wire lut_lines_changed; + wire [15:0] max_lut_lines32; + setting_reg #(.my_addr(BASE+0),.width(16),.at_reset(DEFAULT_LINES32)) sr_num_lines( + .clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),.in(set_data), + .out(max_lut_lines32),.changed(lut_lines_changed)); + + wire idle_cyc_changed; + wire [17:0] idle_flush_cycles; + setting_reg #(.my_addr(BASE+1),.width(18),.at_reset(DEFAULT_IDLE_CYC)) sr_flush_cyc( + .clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),.in(set_data), + .out(idle_flush_cycles),.changed(idle_cyc_changed)); + + //state machine definitions + localparam STATE_READ_HDR = 0; + localparam STATE_WRITE_HDR = 1; + localparam STATE_FORWARD = 2; + localparam STATE_WRITE_PAD = 3; + reg [1:0] state; + + //keep track of the outgoing lines + reg [15:0] line_count; + wire line_count_done = line_count == 1; + wire lut_is_empty = line_count == max_lut_lines32; + always @(posedge clk) begin + if (reset || lut_lines_changed) begin + line_count <= max_lut_lines32; + end + else if (src_rdy_o && dst_rdy_i) begin + line_count <= (line_count_done)? max_lut_lines32 : line_count - 1; + end + end + + //count the number of cycles since RX data so we can force a flush + reg [17:0] non_rx_cycles; + wire idle_timeout = (non_rx_cycles == idle_flush_cycles); + always @(posedge clk) begin + if(reset || state != STATE_READ_HDR || idle_cyc_changed) begin + non_rx_cycles <= 0; + end + else if (~idle_timeout) begin + non_rx_cycles <= non_rx_cycles + 1; + end + end + + //flush when we have written data to a LUT and either idle or non active DSP + wire force_flush = ~lut_is_empty && (idle_timeout || always_flush); + + //the padding state machine + reg [31:0] vita_hdr; + reg has_vita_hdr; + always @(posedge clk) begin + if (reset) begin + state <= STATE_READ_HDR; + end + else case(state) + + STATE_READ_HDR: begin + if (src_rdy_i && dst_rdy_o && data_i[32]) begin + vita_hdr <= data_i[31:0]; + has_vita_hdr <= 1; + state <= (data_i[15:0] > line_count)? state <= STATE_WRITE_PAD : STATE_WRITE_HDR; + end + else if (force_flush) begin + has_vita_hdr <= 0; + state <= STATE_WRITE_PAD; + end + end + + STATE_WRITE_HDR: begin + if (src_rdy_o && dst_rdy_i) begin + state <= STATE_FORWARD; + end + end + + STATE_FORWARD: begin + if (src_rdy_i && dst_rdy_o && data_i[33]) begin + state <= STATE_READ_HDR; + end + end + + STATE_WRITE_PAD: begin + if (src_rdy_o && dst_rdy_i && line_count_done) begin + state <= (has_vita_hdr)? STATE_WRITE_HDR : STATE_READ_HDR; + end + end + + endcase //state + end + + //assign outgoing signals + assign dst_rdy_o = (state == STATE_READ_HDR)? 1 : ((state == STATE_FORWARD)? dst_rdy_i : 0); + assign src_rdy_o = (state == STATE_WRITE_HDR || state == STATE_WRITE_PAD)? 1 : ((state == STATE_FORWARD )? src_rdy_i : 0); + assign data_o = (state == STATE_WRITE_HDR)? {4'b0001, vita_hdr} : ((state == STATE_FORWARD)? data_i : 0); + +endmodule // packet_padder36 + + + + diff --git a/fpga/usrp2/gpif/Makefile.srcs b/fpga/usrp2/gpif/Makefile.srcs index 524e3660d..7909fb5ff 100644 --- a/fpga/usrp2/gpif/Makefile.srcs +++ b/fpga/usrp2/gpif/Makefile.srcs @@ -8,4 +8,6 @@ GPIF_SRCS = $(abspath $(addprefix $(BASE_DIR)/../gpif/, \ packet_reframer.v \ slave_fifo.v \ +fifo36_to_gpmc16.v \ +gpmc16_to_fifo36.v \ )) diff --git a/fpga/usrp2/gpif/fifo36_to_gpmc16.v b/fpga/usrp2/gpif/fifo36_to_gpmc16.v new file mode 100644 index 000000000..508cd319c --- /dev/null +++ b/fpga/usrp2/gpif/fifo36_to_gpmc16.v @@ -0,0 +1,54 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module fifo36_to_gpmc16 +#( + parameter FIFO_SIZE = 9 +) +( + //input fifo interface + input fifo_clk, input fifo_rst, + input [35:0] in_data, + input in_src_rdy, + output in_dst_rdy, + + //output interface + input gpif_clk, input gpif_rst, + output [15:0] out_data, + output valid, + input enable, + output eof +); + + wire [35:0] data_int; + wire src_rdy_int, dst_rdy_int; + + fifo_2clock_cascade #(.WIDTH(36), .SIZE(FIFO_SIZE)) fifo_2clk + (.wclk(fifo_clk), .datain(in_data), .src_rdy_i(in_src_rdy), .dst_rdy_o(in_dst_rdy), .space(), + .rclk(gpif_clk), .dataout(data_int), .src_rdy_o(src_rdy_int), .dst_rdy_i(dst_rdy_int), .occupied(), + .arst(fifo_rst | gpif_rst)); + + wire [18:0] data18_int; + fifo36_to_fifo19 #(.LE(1)) f36_to_f19 + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .f36_datain(data_int), .f36_src_rdy_i(src_rdy_int), .f36_dst_rdy_o(dst_rdy_int), + .f19_dataout(data18_int), .f19_src_rdy_o(valid), .f19_dst_rdy_i(enable) ); + + assign out_data = data18_int[15:0]; + assign eof = data18_int[17]; + +endmodule //fifo_to_gpmc16 diff --git a/fpga/usrp2/gpif/gpmc16_to_fifo36.v b/fpga/usrp2/gpif/gpmc16_to_fifo36.v new file mode 100644 index 000000000..933891715 --- /dev/null +++ b/fpga/usrp2/gpif/gpmc16_to_fifo36.v @@ -0,0 +1,64 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module gpmc16_to_fifo36 +#( + parameter FIFO_SIZE = 9, + + //not ready until minimum xfers of space available + parameter MIN_SPACE16 = 128 +) +( + //input interface + input gpif_clk, input gpif_rst, + input [15:0] in_data, + input valid, + output reg ready, + + //output fifo interface + input fifo_clk, input fifo_rst, + output [35:0] out_data, + output out_src_rdy, + input out_dst_rdy +); + + wire [35:0] data_int; + wire src_rdy_int, dst_rdy_int; + wire [18:0] refr_data; + wire refr_src_rdy, refr_dst_rdy; + + wire [15:0] fifo_space; + + always @(posedge gpif_clk) + ready <= (fifo_space >= MIN_SPACE16/2); + + packet_reframer packet_reframer + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .data_i(in_data), .src_rdy_i(valid), .dst_rdy_o(), + .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy)); + + fifo19_to_fifo36 #(.LE(1)) f19_to_f36 + (.clk(gpif_clk), .reset(gpif_rst), .clear(1'b0), + .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), + .f36_dataout(data_int), .f36_src_rdy_o(src_rdy_int), .f36_dst_rdy_i(dst_rdy_int)); + + fifo_2clock_cascade #(.WIDTH(36), .SIZE(FIFO_SIZE)) fifo_2clk + (.wclk(gpif_clk), .datain(data_int), .src_rdy_i(src_rdy_int), .dst_rdy_o(dst_rdy_int), .space(fifo_space), + .rclk(fifo_clk), .dataout(out_data), .src_rdy_o(out_src_rdy), .dst_rdy_i(out_dst_rdy), .occupied(), + .arst(fifo_rst | gpif_rst)); + +endmodule //fifo_to_gpmc16 diff --git a/fpga/usrp2/gpif/slave_fifo.v b/fpga/usrp2/gpif/slave_fifo.v index d1a0a027b..0f301f8a6 100644 --- a/fpga/usrp2/gpif/slave_fifo.v +++ b/fpga/usrp2/gpif/slave_fifo.v @@ -20,85 +20,70 @@ //this is a FIFO master interface for the FX2 in "slave fifo" mode. module slave_fifo - #(parameter TXFIFOSIZE = 12, parameter RXFIFOSIZE = 12) + #( + //how many cycles max in a transfer state + parameter DATA_XFER_COUNT = 256, + parameter CTRL_XFER_COUNT = 32, + + //sizes for fifo36 2 clock cascade fifos + parameter DATA_RX_FIFO_SIZE = 9, + parameter DATA_TX_FIFO_SIZE = 9, + parameter CTRL_RX_FIFO_SIZE = 9, + parameter CTRL_TX_FIFO_SIZE = 9 + ) (// GPIF signals input gpif_clk, input gpif_rst, inout [15:0] gpif_d, input [3:0] gpif_ctl, - output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr, - - // Wishbone signals - input wb_clk, input wb_rst, - output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso, - output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i, - input [7:0] triggers, - - input dsp_rx_run, - + output reg sloe, output reg slrd, output reg slwr, output reg pktend, output reg [1:0] fifoadr, + // FIFO interface - input fifo_clk, input fifo_rst, input clear_tx, input clear_rx, - output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i, - input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o, - input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o, - output tx_underrun, output rx_overrun, - - input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl, - output [31:0] debug0, output [31:0] debug1 + input fifo_clk, input fifo_rst, + output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy, + input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy, + output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy, + input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy, + + output [31:0] debug ); - reg FX2_DE, FX2_CE, FX2_DF, FX2_CF; + wire FX2_DE_pre = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) + wire FX2_CE_pre = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) + wire FX2_DF_pre = ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) + wire FX2_CF_pre = ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) - // inputs to FPGA (all active low) + reg FX2_DE, FX2_CE, FX2_DF, FX2_CF; always @(posedge gpif_clk) begin - FX2_DE <= ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA) - FX2_CE <= ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB) - FX2_DF <= ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC) - FX2_CF <= ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD) + FX2_DE <= FX2_DE_pre; //EP2 FX2 FIFO empty (FLAGA) + FX2_CE <= FX2_CE_pre; //EP4 FX2 FIFO empty (FLAGB) + FX2_DF <= FX2_DF_pre; //EP6 FX2 FIFO full (FLAGC) + FX2_CF <= FX2_CF_pre; //EP8 FX2 FIFO full (FLAGD) end - wire [17:0] gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out; + wire [15:0] gpif_d_out_ctrl, gpif_d_out_data; + reg [15:0] gpif_d_out, gpif_d_in; // //////////////////////////////////////////////////////////////////// // GPIF bus master state machine - //transfer size for GPIF data. this can be anything really, it's specified only for - //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of - //the double buffers in B100/B150. this should probably be a toplevel parameter or even - //a settings register value. - localparam data_transfer_size = 256; - localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up - - // state machine i/o to four fifos - //tx - wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space - wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable - wire data_tx_dst_rdy; //sm input, data tx path has space - wire data_tx_src_rdy; //sm output, data tx path enable - - //rx - wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable - wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space - wire data_rx_dst_rdy; //sm output, data rx path enable - wire data_rx_src_rdy; //sm input, data rx path has space - - reg tx_data_enough_space; + wire rx_valid, resp_valid; + reg tx_valid, ctrl_valid; + wire tx_ready, ctrl_ready; + reg rx_enable, resp_enable; reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer - reg pktend_latch; - reg [3:0] state; //state machine current state localparam STATE_IDLE = 0; - localparam STATE_DATA_RX = 5; + localparam STATE_THINK = 1; + localparam STATE_DATA_RX = 2; localparam STATE_DATA_TX = 3; - localparam STATE_CTRL_RX = 6; - localparam STATE_CTRL_TX = 9; - localparam STATE_DATA_TX_SLOE = 2; - localparam STATE_CTRL_TX_SLOE = 8; - localparam STATE_DATA_RX_ADR = 1; - localparam STATE_CTRL_RX_ADR = 4; - localparam STATE_PKTEND_ADR = 10; - localparam STATE_PKTEND = 7; + localparam STATE_CTRL_RX = 4; + localparam STATE_CTRL_TX = 5; + localparam STATE_DATA_TX_SLOE = 6; + localparam STATE_CTRL_TX_SLOE = 7; + localparam STATE_DATA_RX_ADR = 8; + localparam STATE_CTRL_RX_ADR = 9; //logs the last bus user for xfer fairness //we only care about data rx vs. tx since ctrl pkts are so short @@ -106,384 +91,184 @@ module slave_fifo localparam BUS_HOG_RX = 0; localparam BUS_HOG_TX = 1; - //count the number of cycles since RX data so we can force a flush - reg [17:0] non_rx_cycles; - localparam rx_idle_flush_cycles = 65536; //about 1ms at 64MHz clock - always @(posedge gpif_clk) begin - if(gpif_rst || state == STATE_DATA_RX || state == STATE_PKTEND) - non_rx_cycles <= 0; - else if (non_rx_cycles != rx_idle_flush_cycles) - non_rx_cycles <= non_rx_cycles + 1; - end - - //when should we flush aka pktend? - //pktend_latch tells us that its ok to flush -> we just had an RX xfer with EOF - //the RX DSP not running or a cycle counter gives us the flushing response dynamic - wire rx_data_flush = (~dsp_rx_run || non_rx_cycles == rx_idle_flush_cycles) && pktend_latch; + wire resp_eof; + reg [1:0] idle_count; // ////////////////////////////////////////////////////////////// // FX2 slave FIFO bus master state machine // - always @(posedge gpif_clk) - if(gpif_rst) begin - state <= STATE_IDLE; - pktend_latch <= 0; - end - else - begin - case (state) - STATE_IDLE: - begin - transfer_count <= 0; - //handle transitions to other states - if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data - state <= STATE_CTRL_TX_SLOE; - else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full - state <= STATE_CTRL_RX_ADR; - else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX & tx_data_enough_space) //if there's room in the data fifo and the FX2 has data - state <= STATE_DATA_TX_SLOE; - else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full - state <= STATE_DATA_RX_ADR; - else if(data_tx_dst_rdy & ~FX2_DE & tx_data_enough_space) - state <= STATE_DATA_TX_SLOE; - else if(data_rx_src_rdy & ~FX2_DF) - state <= STATE_DATA_RX_ADR; - else if(rx_data_flush & ~FX2_DF) - state <= STATE_PKTEND_ADR; - end - - STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD - state <= STATE_DATA_TX; - STATE_CTRL_TX_SLOE: - state <= STATE_CTRL_TX; - - STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR - state <= STATE_DATA_RX; - STATE_CTRL_RX_ADR: - state <= STATE_CTRL_RX; - - STATE_DATA_RX: - begin - if(data_rx_src_rdy && data_rx_dst_rdy) begin - transfer_count <= transfer_count + 1; - pktend_latch <= gpif_d_out_data[17]; //ok to do pkt end when we complete with EOF - end - else - state <= STATE_IDLE; - last_data_bus_hog <= BUS_HOG_RX; - end - - STATE_PKTEND_ADR: - begin - state <= STATE_PKTEND; - end - - STATE_PKTEND: - begin - state <= STATE_IDLE; - pktend_latch <= 0; - end - - STATE_DATA_TX: - begin - if(data_tx_dst_rdy && data_tx_src_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - last_data_bus_hog <= BUS_HOG_TX; - end - STATE_CTRL_RX: - begin - if(ctrl_rx_src_rdy && ctrl_rx_dst_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - end - STATE_CTRL_TX: - begin - if(ctrl_tx_dst_rdy && ctrl_tx_src_rdy) - transfer_count <= transfer_count + 1; - else - state <= STATE_IDLE; - end - endcase + always @(posedge gpif_clk) + if(gpif_rst) begin + state <= STATE_IDLE; + sloe <= 1; + slrd <= 1; + slwr <= 1; + pktend <= 1; + rx_enable <= 0; + tx_valid <= 0; + ctrl_valid <= 0; + resp_enable <= 0; + idle_count <= 0; + end + else case (state) + STATE_IDLE: begin + transfer_count <= 0; + sloe <= 1; + slrd <= 1; + slwr <= 1; + pktend <= 1; + rx_enable <= 0; + tx_valid <= 0; + ctrl_valid <= 0; + resp_enable <= 0; + if (idle_count == 2'b11) state <= STATE_THINK; + idle_count <= idle_count + 1; + end + + STATE_THINK: begin + + idle_count <= 0; + + //handle transitions to other states + if(ctrl_ready & ~FX2_CE) begin //if there's room in the ctrl fifo and the FX2 has ctrl data + state <= STATE_CTRL_TX_SLOE; + fifoadr <= 2'b01; + sloe <= 0; end + else if(resp_valid & ~FX2_CF) begin //if the ctrl fifo has data and the FX2 isn't full + state <= STATE_CTRL_RX_ADR; + fifoadr <= 2'b11; + end + else if(tx_ready & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) begin //if there's room in the data fifo and the FX2 has data + state <= STATE_DATA_TX_SLOE; + last_data_bus_hog <= BUS_HOG_TX; + fifoadr <= 2'b00; + sloe <= 0; + end + else if(rx_valid & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) begin //if the data fifo has data and the FX2 isn't full + state <= STATE_DATA_RX_ADR; + last_data_bus_hog <= BUS_HOG_RX; + fifoadr <= 2'b10; + end + else if(tx_ready & ~FX2_DE) begin + state <= STATE_DATA_TX_SLOE; + last_data_bus_hog <= BUS_HOG_TX; + fifoadr <= 2'b00; + sloe <= 0; + end + else if(rx_valid & ~FX2_DF) begin + state <= STATE_DATA_RX_ADR; + last_data_bus_hog <= BUS_HOG_RX; + fifoadr <= 2'b10; + end + end + + STATE_DATA_TX_SLOE: begin //just to assert SLOE one cycle before SLRD + state <= STATE_DATA_TX; + slrd <= 0; + end - // /////////////////////////////////////////////////////////////////// - // fifo signal assignments and enables + STATE_CTRL_TX_SLOE: begin + state <= STATE_CTRL_TX; + slrd <= 0; + end - //enable fifos - assign data_rx_dst_rdy = (state == STATE_DATA_RX) && ~FX2_DF && (transfer_count != data_transfer_size); - assign data_tx_src_rdy = (state == STATE_DATA_TX) && ~FX2_DE && (transfer_count != data_transfer_size); - assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX) && ~FX2_CF; - assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX) && ~FX2_CE; + STATE_DATA_RX_ADR: begin //just to assert FIFOADR one cycle before SLWR + state <= STATE_DATA_RX; + rx_enable <= 1; + end - //framing for TX ctrl packets - wire sop_ctrl, eop_ctrl; - assign sop_ctrl = (transfer_count == 0); - assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1)); + STATE_CTRL_RX_ADR: begin + state <= STATE_CTRL_RX; + resp_enable <= 1; + end + + STATE_DATA_RX: begin + if (FX2_DF_pre || ~rx_valid || transfer_count == DATA_XFER_COUNT-1) begin + state <= STATE_IDLE; + rx_enable <= 0; + end + gpif_d_out <= gpif_d_out_data; + slwr <= ~rx_valid; + transfer_count <= transfer_count + 1; + end + + STATE_DATA_TX: begin + if (FX2_DE_pre || transfer_count == DATA_XFER_COUNT-1) begin + state <= STATE_IDLE; + slrd <= 1; + end + gpif_d_in <= gpif_d; + tx_valid <= 1; + transfer_count <= transfer_count + 1; + end + + STATE_CTRL_RX: begin + if (FX2_CF_pre || ~resp_valid || resp_eof || transfer_count == CTRL_XFER_COUNT-1) begin + state <= STATE_IDLE; + resp_enable <= 0; + end + pktend <= ~resp_eof; + gpif_d_out <= gpif_d_out_ctrl; + slwr <= ~resp_valid; + transfer_count <= transfer_count + 1; + end + + STATE_CTRL_TX: begin + if (FX2_CE_pre || transfer_count == CTRL_XFER_COUNT-1) begin + state <= STATE_IDLE; + slrd <= 1; + end + gpif_d_in <= gpif_d; + ctrl_valid <= 1; + transfer_count <= transfer_count + 1; + end + endcase - // //////////////////////////////////////////////////////////////////// - // set GPIF pins - - //set fifoadr to the appropriate endpoint - // {0,0}: EP2, data TX from host - // {0,1}: EP4, ctrl TX from host - // {1,0}: EP6, data RX to host - // {1,1}: EP8, ctrl RX to host - assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND) | (state == STATE_PKTEND_ADR), - (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)}; - //set sloe, slwr, slrd (all active low) - //SLOE gets asserted when we want data from the FX2; i.e., TX mode - assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)}; - //"read" and "write" here are from the master's point of view; - //so "read" means "transmit" and "write" means "receive" - assign slwr = ~{(data_rx_src_rdy && data_rx_dst_rdy) || (ctrl_rx_src_rdy && ctrl_rx_dst_rdy)}; - assign slrd = ~{(data_tx_src_rdy && data_tx_dst_rdy) || (ctrl_tx_src_rdy && ctrl_tx_dst_rdy)}; - - wire pktend_ctrl, pktend_data; - assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX)); - assign pktend_data = (state == STATE_PKTEND); - assign pktend = ~(pktend_ctrl | pktend_data); - - //mux between ctrl/data RX data out based on endpoint selection - assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data; // GPIF output data lines, tristate - assign gpif_d = sloe ? gpif_d_out : 16'bz; + assign gpif_d = (sloe)? gpif_d_out[15:0] : 16'bz; // //////////////////////////////////////////////////////////////////// // TX Data Path - wire [15:0] txfifo_data; - wire txfifo_src_rdy, txfifo_dst_rdy; - wire [35:0] tx36_data; - wire tx36_src_rdy, tx36_dst_rdy; - wire [15:0] data_tx_2clk; - wire tx_src_rdy_2clk, tx_dst_rdy_2clk; - - wire [15:0] wr_fifo_space; - - always @(posedge gpif_clk) - tx_data_enough_space <= (wr_fifo_space >= data_transfer_size); - - fifo_cascade #(.WIDTH(16), .SIZE(12)) wr_fifo - (.clk(gpif_clk), .reset(gpif_rst), .clear(clear_tx), - .datain(gpif_d), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(data_tx_dst_rdy), .space(wr_fifo_space), - .dataout(txfifo_data), .src_rdy_o(txfifo_src_rdy), .dst_rdy_i(txfifo_dst_rdy), .occupied()); - - fifo_2clock_cascade #(.WIDTH(16), .SIZE(4)) wr_fifo_2clk - (.wclk(gpif_clk), .datain(txfifo_data), .src_rdy_i(txfifo_src_rdy), .dst_rdy_o(txfifo_dst_rdy), .space(), - .rclk(fifo_clk), .dataout(data_tx_2clk), .src_rdy_o(tx_src_rdy_2clk), .dst_rdy_i(tx_dst_rdy_2clk), .occupied(), - .arst(fifo_rst)); - - // join vita packets which are longer than one frame, add SOP/EOP/OCC - wire [18:0] refr_data; - wire refr_src_rdy, refr_dst_rdy; - //below 3 signals for debug only - wire refr_state; - wire refr_eof; - wire [15:0] refr_len; - - packet_reframer tx_packet_reframer - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .data_i(data_tx_2clk), .src_rdy_i(tx_src_rdy_2clk), .dst_rdy_o(tx_dst_rdy_2clk), - .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy), - .state(refr_state), .eof_out(refr_eof), .length(refr_len)); - - fifo19_to_fifo36 #(.LE(1)) f19_to_f36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy), - .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy)); - - fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), - .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); + gpmc16_to_fifo36 #(.FIFO_SIZE(DATA_TX_FIFO_SIZE), .MIN_SPACE16(DATA_XFER_COUNT)) fifo36_to_gpmc16_tx( + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .in_data(gpif_d_in), .ready(tx_ready), .valid(tx_valid), + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .out_data(tx_data), .out_src_rdy(tx_src_rdy), .out_dst_rdy(tx_dst_rdy) + ); // //////////////////////////////////////////// // RX Data Path - wire [35:0] rx36_data; - wire rx36_src_rdy, rx36_dst_rdy; - wire [18:0] rx19_data; - wire rx19_src_rdy, rx19_dst_rdy; - wire [15:0] rxfifospace; - - //deep 36 bit wide input fifo buffers from DSP - fifo_cascade #(.WIDTH(36), .SIZE(9)) rx_fifo36 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), - .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); - - //convert to fifo19 - fifo36_to_fifo19 #(.LE(1)) f36_to_f19 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy), - .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) ); - - wire [18:0] data_rx_int; - wire rx_src_rdy_int, rx_dst_rdy_int; - //clock domain crossing fifo for RX data - fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk - (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(), - .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(), - .arst(fifo_rst)); - - //rd_fifo buffers writes to the 2clock fifo above - fifo_cascade #(.WIDTH(18), .SIZE(RXFIFOSIZE)) rd_fifo - (.clk(~gpif_clk), .reset(gpif_rst), .clear(clear_rx), - .datain(data_rx_int[17:0]), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace), - .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied()); + fifo36_to_gpmc16 #(.FIFO_SIZE(DATA_RX_FIFO_SIZE)) fifo36_to_gpmc16_rx( + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .in_data(rx_data), .in_src_rdy(rx_src_rdy), .in_dst_rdy(rx_dst_rdy), + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .out_data(gpif_d_out_data), .valid(rx_valid), .enable(rx_enable) + ); // //////////////////////////////////////////////////////////////////// - // FIFO to Wishbone interface + // CTRL TX Data Path - wire [18:0] resp_data, resp_int; - wire resp_src_rdy, resp_dst_rdy; - wire resp_src_rdy_int, resp_dst_rdy_int; - - wire [18:0] tx_err19_data; - wire tx_err19_src_rdy, tx_err19_dst_rdy; - - wire [18:0] ctrl_data; - wire ctrl_src_rdy, ctrl_dst_rdy; - - fifo_to_wb fifo_to_wb - (.clk(fifo_clk), .reset(fifo_rst), .clear(0), - .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), - .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int), - .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o), - .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i), - .triggers(triggers), - .debug0(), .debug1()); - - // //////////////////////////////////////////////////////////////////// - // TX CTRL PATH (ctrl commands into Wishbone) + gpmc16_to_fifo36 #(.FIFO_SIZE(CTRL_TX_FIFO_SIZE), .MIN_SPACE16(CTRL_XFER_COUNT)) fifo36_to_gpmc16_ctrl( + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .in_data(gpif_d_in), .ready(ctrl_ready), .valid(ctrl_valid), + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .out_data(ctrl_data), .out_src_rdy(ctrl_src_rdy), .out_dst_rdy(ctrl_dst_rdy) + ); - //how does this use fifo_clk instead of wb_clk - //answer: on b100 fifo clk IS wb clk - fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk - (.wclk(gpif_clk), .datain({1'b0,eop_ctrl,sop_ctrl,gpif_d}), - .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(), - .rclk(fifo_clk), .dataout(ctrl_data), - .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(), - .arst(fifo_rst)); + // //////////////////////////////////////////// + // CTRL RX Data Path + + fifo36_to_gpmc16 #(.FIFO_SIZE(CTRL_RX_FIFO_SIZE)) fifo36_to_gpmc16_resp( + .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), + .in_data(resp_data), .in_src_rdy(resp_src_rdy), .in_dst_rdy(resp_dst_rdy), + .gpif_clk(gpif_clk), .gpif_rst(gpif_rst), + .out_data(gpif_d_out_ctrl), .valid(resp_valid), .enable(resp_enable), + .eof(resp_eof) + ); - // //////////////////////////////////////////////////////////////////// - // RX CTRL PATH (async packets, ctrl response data) - - //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk - fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o), - .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) ); - - //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo - //how is this clocked on wb_clk? - fifo19_mux #(.prio(0)) mux_err_stream - (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx), - .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int), - .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy), - .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy)); - - //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk - //the output of this fifo is CTRL DATA PENDING FOR GPIF - fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk - (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(), - .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl), - .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(), - .arst(wb_rst)); - - - // //////////////////////////////////////////////////////////////////// - // Debug support, timed and loopback - // RX side muxes test data into the same stream + assign debug = 0; - /////////////////////////////////////////////////////////////////////// - // debug lines - wire [31:0] debug_rd, debug_wr, debug_split0, debug_split1; - - wire [35:0] timedrx_data, loopbackrx_data, testrx_data; - wire [35:0] timedtx_data, loopbacktx_data, testtx_data; - wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, - testrx_src_rdy, testrx_dst_rdy; - wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, - testtx_src_rdy, testtx_dst_rdy; - wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; - - wire [31:0] total, crc_err, seq_err, len_err; - wire sel_testtx = test_ctrl[0]; - wire sel_loopbacktx = test_ctrl[1]; - wire pkt_src_enable = test_ctrl[2]; - wire pkt_sink_enable = test_ctrl[3]; -/* - fifo36_mux rx_test_mux_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), - .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), - .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); - - fifo36_mux rx_test_mux_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), - .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - fifo_short #(.WIDTH(36)) loopback_fifo - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), - .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), - .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); - - // Crossbar used as a demux for switching TX stream to main DSP or to test logic - crossbar36 tx_crossbar_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_testtx), - .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), - .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), - .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); - - crossbar36 tx_crossbar_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_loopbacktx), - .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), - .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), - .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); - - // Fixed rate TX traffic consumer - fifo_pacer tx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), - .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), - .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), - .underrun(tx_underrun), .overrun()); - - packet_verifier32 pktver32 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), - .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); - - // Fixed rate RX traffic generator - vita_pkt_gen pktgen - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .len(test_len), - .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); - - fifo_pacer rx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), - .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), - .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), - .underrun(), .overrun(rx_overrun)); -*/ - // //////////////////////////////////////////// - // DEBUG - - assign debug0 = { pktend_latch, data_rx_src_rdy, gpif_ctl[3:0], sloe, slrd, slwr, pktend, fifoadr[1:0], state[3:0], gpif_d[15:0]}; - //assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int, - // tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy, - // tx36_src_rdy, tx36_dst_rdy, - // gpif_ctl[3:0], fifoadr[1:0], - // wr_fifo_space[15:0]}; - assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy, - data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy}; endmodule // slave_fifo diff --git a/fpga/usrp2/top/B100/B100.v b/fpga/usrp2/top/B100/B100.v index dcda974b4..cb4efa4fa 100644 --- a/fpga/usrp2/top/B100/B100.v +++ b/fpga/usrp2/top/B100/B100.v @@ -1,5 +1,5 @@ // -// Copyright 2011 Ettus Research LLC +// Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -50,6 +50,8 @@ module B100 // ///////////////////////////////////////////////////////////////////////// // Clocking wire clk_fpga, clk_fpga_in, reset; + wire gpif_clk = IFCLK; + wire gpif_rst; IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); @@ -57,6 +59,7 @@ module B100 BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset)); + reset_sync reset_sync_gpif(.clk(gpif_clk), .reset_in((~reset_n) | (~ext_reset)), .reset_out(gpif_rst)); // ///////////////////////////////////////////////////////////////////////// // SPI @@ -105,6 +108,7 @@ module B100 // ///////////////////////////////////////////////////////////////////////// // RX ADC -- handles deinterleaving + wire rxsync_0, rxsync_1; reg [11:0] rx_i, rx_q; wire [11:0] rx_a, rx_b; @@ -151,24 +155,60 @@ module B100 rx_i <= rx_a; rx_q <= rx_b; end - + // ///////////////////////////////////////////////////////////////////////// - // Main U1E Core - u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), - .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), - .debug_txd(), .debug_rxd(1'b1), - - .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_pktend(GPIF_PKTEND), - .gpif_sloe(GPIF_SLOE), .gpif_slwr(GPIF_SLWR), .gpif_slrd(GPIF_SLRD), - .gpif_fifoadr(GPIF_ADR), .gpif_clk(IFCLK), - - .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), - .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), - .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), - .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), - .io_tx(io_tx), .io_rx(io_rx), - .tx_i(tx_i), .tx_q(tx_q), - .rx_i(rx_i), .rx_q(rx_q), - .pps_in(PPS_IN) ); + // Main Core + wire [35:0] rx_data, tx_data, ctrl_data, resp_data; + wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy; + wire dsp_rx_run, dsp_tx_run; + wire [7:0] sen8; + assign {SEN_CODEC,SEN_TX_DB,SEN_RX_DB} = sen8[2:0]; + wire [31:0] core_debug; + + assign debug_led = {dsp_tx_run, dsp_rx_run, cgen_st_ld}; + wire cgen_sync; + assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1}; + + u1plus_core #( + .NUM_RX_DSPS(1), + .DSP_RX_XTRA_FIFOSIZE(11), + .DSP_TX_XTRA_FIFOSIZE(12), + .USE_PACKET_PADDER(1) + ) core( + .clk(clk_fpga), .reset(reset), + .debug(core_debug), .debug_clk(debug_clk), + + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run), + .clock_sync(cgen_sync), + + .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), + .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + + // ///////////////////////////////////////////////////////////////////////// + // Interface from host to/from GPIF + wire [31:0] gpif_debug; + slave_fifo slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(GPIF_D), + .gpif_ctl(GPIF_CTL), .sloe(GPIF_SLOE), .slwr(GPIF_SLWR), .slrd(GPIF_SLRD), + .pktend(GPIF_PKTEND), .fifoadr(GPIF_ADR), + + .fifo_clk(clk_fpga), .fifo_rst(reset), + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .debug(gpif_debug)); + + //assign debug = gpif_debug; + assign debug = core_debug; endmodule // B100 diff --git a/fpga/usrp2/top/B100/core_compile b/fpga/usrp2/top/B100/core_compile index b62cbaee0..2192bfa94 100755 --- a/fpga/usrp2/top/B100/core_compile +++ b/fpga/usrp2/top/B100/core_compile @@ -1 +1 @@ -iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac B100.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/B100/timing.ucf b/fpga/usrp2/top/B100/timing.ucf index 96c47cf2c..c4404e1d0 100644 --- a/fpga/usrp2/top/B100/timing.ucf +++ b/fpga/usrp2/top/B100/timing.ucf @@ -5,10 +5,15 @@ NET "IFCLK" TNM_NET = "IFCLK"; TIMESPEC "TS_IFCLK" = PERIOD "IFCLK" 20833 ps HIGH 50 %; #constrain FX2 IO -NET "GPIF_D<*>" MAXDELAY = 5.5 ns; -NET "GPIF_CTL<*>" MAXDELAY = 5.5 ns; -NET "GPIF_ADR<*>" MAXDELAY = 5.5ns; -NET "GPIF_SLWR" MAXDELAY = 5.5 ns; -NET "GPIF_SLRD" MAXDELAY = 5.5 ns; -NET "GPIF_SLOE" MAXDELAY = 5.5 ns; -NET "GPIF_PKTEND" MAXDELAY = 5.5 ns; +INST "GPIF_D<*>" TNM = gpif_net_in; +INST "GPIF_CTL<*>" TNM = gpif_net_in; + +INST "GPIF_D<*>" TNM = gpif_net_out; +INST "GPIF_ADR<*>" TNM = gpif_net_out; +INST "GPIF_SLWR" TNM = gpif_net_out; +INST "GPIF_SLOE" TNM = gpif_net_out; +INST "GPIF_SLRD" TNM = gpif_net_out; +INST "GPIF_PKTEND" TNM = gpif_net_out; + +TIMEGRP "gpif_net_in" OFFSET = IN 7 ns VALID 14 ns BEFORE "IFCLK" RISING; +TIMEGRP "gpif_net_out" OFFSET = OUT 7 ns AFTER "IFCLK" RISING; diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v index e5af189cc..691ad1f75 100644 --- a/fpga/usrp2/top/B100/u1plus_core.v +++ b/fpga/usrp2/top/B100/u1plus_core.v @@ -18,435 +18,332 @@ module u1plus_core - (input clk_fpga, input rst_fpga, - output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, - output debug_txd, input debug_rxd, - - // GPIF - inout [15:0] gpif_d, input [3:0] gpif_ctl, output gpif_sloe, - output gpif_slwr, output gpif_slrd, output gpif_pktend, output [1:0] gpif_fifoadr, - input gpif_clk, - +#( + parameter NUM_RX_DSPS = 2, + parameter CTRL_ACK_SID = 20, //needed for reply + + parameter DSP_TX_FIFOSIZE = 10, //4K MTU + parameter DSP_RX_FIFOSIZE = 10, //4K MTU + + parameter DSP_RX_XTRA_FIFOSIZE = 11, + parameter DSP_TX_XTRA_FIFOSIZE = 11, + + parameter USE_PACKET_PADDER = 0 +) + (input clk, input reset, + output [31:0] debug, output [1:0] debug_clk, + + // Host Interface + input [35:0] tx_data, input tx_src_rdy, output tx_dst_rdy, + output [35:0] rx_data, output rx_src_rdy, input rx_dst_rdy, + input [35:0] ctrl_data, input ctrl_src_rdy, output ctrl_dst_rdy, + output [35:0] resp_data, output resp_src_rdy, input resp_dst_rdy, + + output dsp_rx_run, output dsp_tx_run, output clock_sync, + inout db_sda, inout db_scl, - output sclk, output [15:0] sen, output mosi, input miso, + output sclk, output [7:0] sen, output mosi, input miso, - input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, - inout [15:0] io_tx, inout [15:0] io_rx, - output [13:0] tx_i, output [13:0] tx_q, - input [11:0] rx_i, input [11:0] rx_q, + inout [15:0] io_tx, inout [15:0] io_rx, + output [13:0] tx_i, output [13:0] tx_q, + input [11:0] rx_i, input [11:0] rx_q, input pps_in ); - localparam TXFIFOSIZE = 11; - localparam RXFIFOSIZE = 12; - - // 64 total regs in address space - localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8) - localparam SR_RX_DSP0 = 10; // 4 regs (+0 to +3) - localparam SR_RX_CTRL1 = 16; // 9 regs (+0 to +8) - localparam SR_RX_DSP1 = 26; // 4 regs (+0 to +3) - localparam SR_TX_CTRL = 32; // 4 regs (+0 to +3) - localparam SR_TX_DSP = 38; // 3 regs (+0 to +2) - - localparam SR_TIME64 = 42; // 6 regs (+0 to +5) - localparam SR_RX_FRONT = 48; // 5 regs (+0 to +4) - localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4) - - localparam SR_REG_TEST32 = 60; // 1 reg - localparam SR_CLEAR_FIFO = 61; // 1 reg - localparam SR_GLOBAL_RESET = 63; // 1 reg - localparam SR_USER_REGS = 64; // 2 regs - - localparam SR_GPIO = 128; // 5 regs - - wire wb_clk = clk_fpga; - wire wb_rst, global_reset; - - wire pps_int; - wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_cgen_ctrl, reg_test; - - wire [7:0] set_addr, set_addr_user; - wire [31:0] set_data, set_data_user; - wire set_stb, set_stb_user; - - wire [31:0] debug0; - wire [31:0] debug1; - - wire [31:0] debug_vt; - wire gpif_rst; - - reg [7:0] frames_per_packet; - - wire rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpif, tx_underrun_dsp, tx_underrun_gpif; - wire rx_overrun = rx_overrun_gpif | rx_overrun_dsp0 | rx_overrun_dsp1; - wire tx_underrun = tx_underrun_gpif | tx_underrun_dsp; - - setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(global_reset)); - - reset_sync reset_sync_wb(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst)); - reset_sync reset_sync_gp(.clk(gpif_clk), .reset_in(rst_fpga | global_reset), .reset_out(gpif_rst)); - - // ///////////////////////////////////////////////////////////////////////////////////// - // GPIF Slave to Wishbone Master - localparam dw = 16; - localparam aw = 11; - localparam sw = 2; - - wire [dw-1:0] m0_dat_mosi, m0_dat_miso; - wire [aw-1:0] m0_adr; - wire [sw-1:0] m0_sel; - wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty; - - wire [31:0] debug_gpif; - - wire [35:0] tx_data, rx_data, tx_err_data; - wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, - tx_err_src_rdy, tx_err_dst_rdy; - - wire clear_fifo; - - setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_fifo)); - - wire run_rx0, run_rx1; - - slave_fifo #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) - slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), - .gpif_ctl(gpif_ctl), .sloe(gpif_sloe), .slwr(gpif_slwr), .slrd(gpif_slrd), - .pktend(gpif_pktend), .fifoadr(gpif_fifoadr), - - .wb_clk(wb_clk), .wb_rst(wb_rst), - .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), - .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), - .wb_ack_i(m0_ack), .triggers(8'd0), - - .dsp_rx_run(run_rx0 | run_rx1), - - .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo), - .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), - .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), - .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy), - - .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), - - .test_len(0), .test_rate(0), .test_ctrl(0), - .debug0(debug0), .debug1(debug1)); + localparam SR_MISC = 0; // 5 + localparam SR_USER_REGS = 5; // 2 + localparam SR_PADDER = 10; // 2 + + localparam SR_TX_CTRL = 32; // 6 + localparam SR_TX_DSP = 40; // 5 + localparam SR_TX_FE = 48; // 5 + + localparam SR_RX_CTRL0 = 96; // 9 + localparam SR_RX_DSP0 = 106; // 7 + localparam SR_RX_FE = 114; // 5 + + localparam SR_RX_CTRL1 = 128; // 9 + localparam SR_RX_DSP1 = 138; // 7 + + localparam SR_TIME64 = 192; // 6 + localparam SR_SPI = 208; // 3 + localparam SR_I2C = 216; // 1 + localparam SR_GPIO = 224; // 5 + + //compatibility number -> increment when the fpga has been sufficiently altered + localparam compat_num = {16'd11, 16'd0}; //major, minor + + //assign run signals used for ATR logic + wire [NUM_RX_DSPS-1:0] run_rx_n; + wire run_tx; + wire run_rx = |(run_rx_n); + assign dsp_rx_run = run_rx; + assign dsp_tx_run = run_tx; + + //shared time core signals + wire [63:0] vita_time, vita_time_pps; + + //shared settings bus signals + wire set_stb, set_stb_user; + wire [31:0] set_data, set_data_user; + wire [7:0] set_addr, set_addr_user; + + //shared SPI core signals + wire [31:0] spi_readback; + wire spi_ready; + + //shared I2C core signals + wire [31:0] i2c_readback; + wire i2c_ready; + + //shared GPIO core signals + wire [31:0] gpio_readback; + + /////////////////////////////////////////////////////////////////////////// + // Misc Registers - persistent across resets + /////////////////////////////////////////////////////////////////////////// + wire [31:0] config_word0; + setting_reg #(.my_addr(SR_MISC+0), .width(32)) sr_misc_config0 + (.clk(clk), .rst(1'b0/*reset*/), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(config_word0)); + wire [31:0] config_word1; + setting_reg #(.my_addr(SR_MISC+1), .width(32)) sr_misc_config1 + (.clk(clk), .rst(1'b0/*reset*/), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(config_word1)); + + /////////////////////////////////////////////////////////////////////////// + // Settings Bus and Readback + /////////////////////////////////////////////////////////////////////////// + user_settings #(.BASE(SR_USER_REGS)) user_settings + (.clk(clk),.rst(reset), + .set_stb(set_stb), .set_addr(set_addr),.set_data(set_data), + .set_addr_user(set_addr_user),.set_data_user(set_data_user), .set_stb_user(set_stb_user) ); + + wire [35:0] ctrl_out_data, ctrl_int_data; + wire ctrl_out_src_rdy, ctrl_out_dst_rdy; + wire ctrl_int_src_rdy, ctrl_int_dst_rdy; + + fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_fifo + (.clk(clk), .reset(reset), .clear(1'b0), + .datain(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), .space(), + .dataout(ctrl_int_data), .src_rdy_o(ctrl_int_src_rdy), .dst_rdy_i(ctrl_int_dst_rdy), .occupied()); + + wire [31:0] num_rx_dsps_rb = NUM_RX_DSPS; + + wire [31:0] sfc_debug; + settings_fifo_ctrl #(.PROT_HDR(0), .ACK_SID(CTRL_ACK_SID), .XPORT_HDR(0)) sfc + ( + .clock(clk), .reset(reset), .clear(1'b0), + .vita_time(vita_time), .perfs_ready(spi_ready & i2c_ready), + .in_data(ctrl_int_data), .in_valid(ctrl_int_src_rdy), .in_ready(ctrl_int_dst_rdy), + .out_data(ctrl_out_data), .out_valid(ctrl_out_src_rdy), .out_ready(ctrl_out_dst_rdy), + .strobe(set_stb), .addr(set_addr), .data(set_data), + .word00(spi_readback),.word01(compat_num),.word02(i2c_readback),.word03(gpio_readback), + .word04(config_word0),.word05(config_word1),.word06(num_rx_dsps_rb),.word07(32'hffff_ffff), + .word08(32'hffff_ffff),.word09(32'hffff_ffff),.word10(vita_time[63:32]), + .word11(vita_time[31:0]),.word12(32'hffff_ffff),.word13(32'hffff_ffff), + .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]), + .debug(sfc_debug) + ); + + /////////////////////////////////////////////////////////////////////////// + // Time Core + /////////////////////////////////////////////////////////////////////////// + time_64bit #(.BASE(SR_TIME64)) time_64bit + (.clk(clk), .rst(reset), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), + .exp_time_in(0)); + assign clock_sync = 1'b0; + + /////////////////////////////////////////////////////////////////////////// + // SPI Core + /////////////////////////////////////////////////////////////////////////// + simple_spi_core #(.BASE(SR_SPI), .WIDTH(8), .CLK_IDLE(0), .SEN_IDLE(8'hff)) + simple_spi_core (.clock(clk), .reset(reset), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .readback(spi_readback), .ready(spi_ready), + .sen(sen), .sclk(sclk), .mosi(mosi), .miso(miso)); + + /////////////////////////////////////////////////////////////////////////// + // I2C Core + /////////////////////////////////////////////////////////////////////////// + wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; + simple_i2c_core #(.BASE(SR_I2C)) i2c_core + (.clock(clk),.reset(reset), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .readback(i2c_readback), .ready(i2c_ready), + .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), + .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); + + // I2C -- Don't use external transistors for open drain, the FPGA implements this + IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); + IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); + + /////////////////////////////////////////////////////////////////////////// + // GPIO Core + /////////////////////////////////////////////////////////////////////////// + gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) + gpio_atr(.clk(clk),.reset(reset), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .rx(run_rx), .tx(run_tx), .gpio({io_tx, io_rx}), .gpio_readback(gpio_readback) ); // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p - rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend - (.clk(wb_clk),.rst(wb_rst), + rx_frontend #(.BASE(SR_RX_FE)) rx_frontend + (.clk(clk),.rst(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_a({rx_i,4'b00}),.adc_ovf_a(0), .adc_b({rx_q,4'b00}),.adc_ovf_b(0), - .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug()); - - // ///////////////////////////////////////////////////////////////////////// - // DSP RX 0 - - wire [31:0] sample_rx0; - wire strobe_rx0, clear_rx0; - wire [35:0] vita_rx_data0; - wire vita_rx_src_rdy0, vita_rx_dst_rdy0; - - ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0 - (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), - .debug() ); + .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx), .debug()); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0 - (.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .vita_time(vita_time), .overrun(rx_overrun_dsp0), - .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0), - .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0), - .debug() ); - // ///////////////////////////////////////////////////////////////////////// - // DSP RX 1 - - wire [31:0] sample_rx1; - wire strobe_rx1, clear_rx1; - wire [35:0] vita_rx_data1; - wire vita_rx_src_rdy1, vita_rx_dst_rdy1; - - ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1 - (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), - .debug() ); - - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1 - (.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), - .vita_time(vita_time), .overrun(rx_overrun_dsp1), - .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1), - .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1), - .debug() ); + // DSP RX * + + wire [35:0] rx_int2_data [NUM_RX_DSPS-1:0]; + wire rx_int2_src_rdy [NUM_RX_DSPS-1:0]; + wire rx_int2_dst_rdy [NUM_RX_DSPS-1:0]; + + genvar dspno; + generate + for(dspno = 0; dspno < NUM_RX_DSPS; dspno = dspno + 1) begin:gen_rx_dsps + + wire [31:0] sample_rx; + wire strobe_rx, clear_rx; + wire [35:0] vita_rx_data; + wire vita_rx_src_rdy, vita_rx_dst_rdy; + wire [35:0] int_rx_data; + wire int_rx_src_rdy, int_rx_dst_rdy; + + ddc_chain #(.BASE(SR_RX_DSP0+dspno*32), .DSPNO(dspno)) ddc_chain + (.clk(clk), .rst(reset), .clr(clear_rx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), + .sample(sample_rx), .run(run_rx_n[dspno]), .strobe(strobe_rx), + .debug() ); + + vita_rx_chain #(.BASE(SR_RX_CTRL0+dspno*32), .UNIT(dspno), .FIFOSIZE(DSP_RX_FIFOSIZE), .PROT_ENG_FLAGS(0), .DSP_NUMBER(dspno)) vita_rx_chain + (.clk(clk),.reset(reset), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), + .vita_time(vita_time), .overrun(), + .sample(sample_rx), .run(run_rx_n[dspno]), .strobe(strobe_rx), .clear_o(clear_rx), + .rx_data_o(vita_rx_data), .rx_dst_rdy_i(vita_rx_dst_rdy), .rx_src_rdy_o(vita_rx_src_rdy), + .debug() ); + + fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_FIFOSIZE+1)) rx_data_fifo + (.clk(clk), .reset(reset), .clear(1'b0), + .datain(vita_rx_data), .src_rdy_i(vita_rx_src_rdy), .dst_rdy_o(vita_rx_dst_rdy), .space(), + .dataout(int_rx_data), .src_rdy_o(int_rx_src_rdy), .dst_rdy_i(int_rx_dst_rdy), .occupied()); + + if (dspno == 0) begin + assign rx_int2_data[dspno] = int_rx_data; + assign rx_int2_src_rdy[dspno] = int_rx_src_rdy; + assign int_rx_dst_rdy = rx_int2_dst_rdy[dspno]; + end + else begin + fifo36_mux #(.prio(0)) // No priority, fair sharing + combine_rx_dsps ( + .clk(clk), .reset(reset), .clear(1'b0/*noclear*/), + .data0_i(rx_int2_data[dspno-1]), .src0_rdy_i(rx_int2_src_rdy[dspno-1]), .dst0_rdy_o(rx_int2_dst_rdy[dspno-1]), + .data1_i(int_rx_data), .src1_rdy_i(int_rx_src_rdy), .dst1_rdy_o(int_rx_dst_rdy), + .data_o(rx_int2_data[dspno]), .src_rdy_o(rx_int2_src_rdy[dspno]), .dst_rdy_i(rx_int2_dst_rdy[dspno]) + ); + end + + end + endgenerate // ///////////////////////////////////////////////////////////////////////// // RX Stream muxing - fifo36_mux #(.prio(0)) mux_data_streams - (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo), - .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0), - .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); + wire [35:0] rx_int3_data; + wire rx_int3_src_rdy, rx_int3_dst_rdy; + + fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_XTRA_FIFOSIZE)) rx_data_fifo_combined + (.clk(clk), .reset(reset), .clear(1'b0), + .datain(rx_int2_data[NUM_RX_DSPS-1]), .src_rdy_i(rx_int2_src_rdy[NUM_RX_DSPS-1]), .dst_rdy_o(rx_int2_dst_rdy[NUM_RX_DSPS-1]), .space(), + .dataout(rx_int3_data), .src_rdy_o(rx_int3_src_rdy), .dst_rdy_i(rx_int3_dst_rdy), .occupied()); + + generate + if (USE_PACKET_PADDER) begin + packet_padder36 #(.BASE(SR_PADDER)) packet_padder_rx_data36( + .clk(clk), .reset(reset), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .data_i(rx_int3_data), .src_rdy_i(rx_int3_src_rdy), .dst_rdy_o(rx_int3_dst_rdy), + .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy), + .always_flush(~dsp_rx_run)); + end + else begin + assign rx_data = rx_int3_data; + assign rx_src_rdy = rx_int3_src_rdy; + assign rx_int3_dst_rdy = rx_dst_rdy; + end + endgenerate + + /////////////////////////////////////////////////////////////////////////// + // MUX for TX async and resp data + /////////////////////////////////////////////////////////////////////////// + wire [35:0] tx_err_data, resp_data_int; + wire tx_err_src_rdy, resp_src_rdy_int; + wire tx_err_dst_rdy, resp_dst_rdy_int; + + fifo36_mux #(.prio(0)) // No priority, fair sharing + combine_async_and_resp ( + .clk(clk), .reset(reset), .clear(1'b0/*noclear*/), + .data0_i(ctrl_out_data), .src0_rdy_i(ctrl_out_src_rdy), .dst0_rdy_o(ctrl_out_dst_rdy), + .data1_i(tx_err_data), .src1_rdy_i(tx_err_src_rdy), .dst1_rdy_o(tx_err_dst_rdy), + .data_o(resp_data_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int) + ); + + fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_fifo + (.clk(clk), .reset(reset), .clear(1'b0), + .datain(resp_data_int), .src_rdy_i(resp_src_rdy_int), .dst_rdy_o(resp_dst_rdy_int), .space(), + .dataout(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy), .occupied()); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX - wire run_tx; wire [23:0] tx_fe_i, tx_fe_q; wire [31:0] sample_tx; wire strobe_tx, clear_tx; - vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11), + vita_tx_chain #(.BASE(SR_TX_CTRL), + .FIFOSIZE(DSP_TX_FIFOSIZE), + .POST_ENGINE_FIFOSIZE(DSP_TX_XTRA_FIFOSIZE), .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), - .DSP_NUMBER(0)) + .DSP_NUMBER(0)) vita_tx_chain - (.clk(wb_clk), .reset(wb_rst), + (.clk(clk), .reset(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), .sample(sample_tx), .strobe(strobe_tx), - .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx), - .debug(debug_vt)); + .underrun(), .run(run_tx), .clear_o(clear_tx), + .debug()); duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain - (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx), + (.clk(clk), .rst(reset), .clr(clear_tx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), .debug() ); - tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend - (.clk(wb_clk), .rst(wb_rst), + tx_frontend #(.BASE(SR_TX_FE), .WIDTH_OUT(14)) tx_frontend + (.clk(clk), .rst(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(tx_i), .dac_b(tx_q)); // ///////////////////////////////////////////////////////////////////////////////////// - // Wishbone Intercon, single master - wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, - s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso, - s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso, - sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso; - wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr; - wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr; - wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel; - wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel; - wire s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack; - wire s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack; - wire s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb; - wire s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb; - wire s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc; - wire s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc; - wire s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we; - wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; - - wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), - .s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs - .s1_addr(4'h1), .s1_mask(4'hF), // Unused - .s2_addr(4'h2), .s2_mask(4'hF), // SPI - .s3_addr(4'h3), .s3_mask(4'hF), // I2C - .s4_addr(4'h4), .s4_mask(4'hF), // Unused - .s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0 - .s6_addr(4'h6), .s6_mask(4'hF), // Unused - .s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX - .s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide - // slaves 9-f alias to slave 1, all are unused - .s9_addr(4'h1), .s9_mask(4'hF), - .sa_addr(4'h1), .sa_mask(4'hF), .sb_addr(4'h1), .sb_mask(4'hF), - .sc_addr(4'h1), .sc_mask(4'hF), .sd_addr(4'h1), .sd_mask(4'hF), - .se_addr(4'h1), .se_mask(4'hF), .sf_addr(4'h1), .sf_mask(4'hF)) - wb_1master - (.clk_i(wb_clk),.rst_i(wb_rst), - .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), - .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), - .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), - .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0), - .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), - .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0), - .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), - .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0), - .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), - .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0), - .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), - .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0), - .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), - .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0), - .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), - .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0), - .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), - .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0), - .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), - .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0), - .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), - .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0), - .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb), - .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0), - .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb), - .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0), - .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb), - .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0), - .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb), - .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0), - .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb), - .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), - .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), - .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); - - assign s1_ack = 0; assign s4_ack = 0; assign s5_ack = 0; assign s6_ack = 0; - assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; - assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; - - // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 0, Misc LEDs, Switches, controls - - localparam REG_CGEN_CTRL = 7'd4; // out - localparam REG_CGEN_ST = 7'd6; // in - localparam REG_TEST = 7'd8; // out - localparam REG_RX_FRAMELEN = 7'd10; // in - localparam REG_TX_FRAMELEN = 7'd12; // out - - always @(posedge wb_clk) - if(wb_rst) - begin - reg_cgen_ctrl <= 2'b11; - reg_test <= 0; - frames_per_packet <= 0; - end - else - if(s0_cyc & s0_stb & s0_we) - case(s0_adr[6:0]) - REG_CGEN_CTRL : - reg_cgen_ctrl <= s0_dat_mosi; - REG_TEST : - reg_test <= s0_dat_mosi; - REG_RX_FRAMELEN : - frames_per_packet <= s0_dat_mosi[7:0]; - endcase // case (s0_adr[6:0]) - - assign debug_led = {run_tx, (run_rx0 | run_rx1), cgen_st_ld}; - assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; - - assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : - (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : - (s0_adr[6:0] == REG_TEST) ? reg_test : - 16'hBEEF; - - assign s0_ack = s0_stb & s0_cyc; - - // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 2, SPI - - spi_top16 shared_spi - (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi), - .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), - .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(), - .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) ); - - // ///////////////////////////////////////////////////////////////////////// - // Slave 3, I2C - - wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; - i2c_master_top #(.ARST_LVL(1)) i2c - (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), - .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]), - .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), - .wb_ack_o(s3_ack),.wb_inta_o(), - .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), - .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); - - assign s3_dat_miso[15:8] = 8'd0; - - // I2C -- Don't use external transistors for open drain, the FPGA implements this - IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); - IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); - - // ///////////////////////////////////////////////////////////////////////// - // GPIOs - - wire [31:0] gpio_readback; - - gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) - gpio_atr(.clk(wb_clk),.reset(wb_rst), - .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), - .rx(run_rx0 | run_rx1), .tx(run_tx), - .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); - - // ///////////////////////////////////////////////////////////////////////// - // Settings Bus -- Slave #8 + 9 - - // only have 64 regs, 32 bits each with current setup... - settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE - (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi), - .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), - .strobe(set_stb),.addr(set_addr),.data(set_data) ); - - user_settings #(.BASE(SR_USER_REGS)) user_settings - (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb), - .set_addr(set_addr),.set_data(set_data), - .set_addr_user(set_addr_user),.set_data_user(set_data_user), - .set_stb_user(set_stb_user) ); - - // ///////////////////////////////////////////////////////////////////////// - // Readback mux 32 -- Slave #7 - - //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd10, 16'd0}; //major, minor - - wire [31:0] reg_test32; - - setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32 - (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(reg_test32),.changed()); - - wb_readback_mux_16LE readback_mux_32 - (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb), - .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), - - .word00(vita_time[63:32]), .word01(vita_time[31:0]), - .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), - .word04(reg_test32), .word05(32'b0), - .word06(compat_num), .word07(gpio_readback), - .word08(32'b0), .word09(32'b0), - .word10(32'b0), .word11(32'b0), - .word12(32'b0), .word13(32'b0), - .word14(32'b0), .word15(32'b0) - ); - - // ///////////////////////////////////////////////////////////////////////// - // VITA Timing - - time_64bit #(.BASE(SR_TIME64)) time_64bit - (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), - .exp_time_in(0)); - - // ///////////////////////////////////////////////////////////////////////////////////// // Debug circuitry - assign debug_clk = 2'b00; // { gpif_clk, clk_fpga }; - assign debug = 0; - + assign debug_clk = 2'b11; + assign debug = 32'hffffffff; + endmodule // u1plus_core |