diff options
Diffstat (limited to 'fpga')
27 files changed, 1342 insertions, 372 deletions
diff --git a/fpga/usrp2/control_lib/Makefile.srcs b/fpga/usrp2/control_lib/Makefile.srcs index a1c11c026..567feacde 100644 --- a/fpga/usrp2/control_lib/Makefile.srcs +++ b/fpga/usrp2/control_lib/Makefile.srcs @@ -11,7 +11,9 @@ atr_controller.v \ bin2gray.v \ dcache.v \ decoder_3_8.v \ +dbsm.v \ dpram32.v \ +double_buffer.v \ gray2bin.v \ gray_send.v \ icache.v \ @@ -51,4 +53,5 @@ nsgpio16LE.v \ settings_bus_16LE.v \ atr_controller16.v \ fifo_to_wb.v \ +gpio_atr.v \ )) diff --git a/fpga/usrp2/control_lib/dbsm.v b/fpga/usrp2/control_lib/dbsm.v new file mode 100644 index 000000000..fea51096f --- /dev/null +++ b/fpga/usrp2/control_lib/dbsm.v @@ -0,0 +1,164 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module dbsm + (input clk, + input reset, + input clear, + + output write_ok, + output write_ptr, + input write_done, + + output read_ok, + output read_ptr, + input read_done, + + output access_ok, + output access_ptr, + input access_done, + input access_skip_read + ); + + localparam PORT_WAIT_0 = 0; + localparam PORT_USE_0 = 1; + localparam PORT_WAIT_1 = 2; + localparam PORT_USE_1 = 3; + + reg [1:0] write_port_state, access_port_state, read_port_state; + + localparam BUFF_WRITABLE = 0; + localparam BUFF_ACCESSIBLE = 1; + localparam BUFF_READABLE = 2; + localparam BUFF_ERROR = 3; + + wire [1:0] buff_state[0:1]; + + always @(posedge clk) + if(reset | clear) + write_port_state <= PORT_WAIT_0; + else + case(write_port_state) + PORT_WAIT_0 : + if(buff_state[0]==BUFF_WRITABLE) + write_port_state <= PORT_USE_0; + PORT_USE_0 : + if(write_done) + write_port_state <= PORT_WAIT_1; + PORT_WAIT_1 : + if(buff_state[1]==BUFF_WRITABLE) + write_port_state <= PORT_USE_1; + PORT_USE_1 : + if(write_done) + write_port_state <= PORT_WAIT_0; + endcase // case (write_port_state) + + assign write_ok = (write_port_state == PORT_USE_0) | (write_port_state == PORT_USE_1); + assign write_ptr = (write_port_state == PORT_USE_1); + + always @(posedge clk) + if(reset | clear) + access_port_state <= PORT_WAIT_0; + else + case(access_port_state) + PORT_WAIT_0 : + if(buff_state[0]==BUFF_ACCESSIBLE) + access_port_state <= PORT_USE_0; + PORT_USE_0 : + if(access_done) + access_port_state <= PORT_WAIT_1; + PORT_WAIT_1 : + if(buff_state[1]==BUFF_ACCESSIBLE) + access_port_state <= PORT_USE_1; + PORT_USE_1 : + if(access_done) + access_port_state <= PORT_WAIT_0; + endcase // case (access_port_state) + + assign access_ok = (access_port_state == PORT_USE_0) | (access_port_state == PORT_USE_1); + assign access_ptr = (access_port_state == PORT_USE_1); + + always @(posedge clk) + if(reset | clear) + read_port_state <= PORT_WAIT_0; + else + case(read_port_state) + PORT_WAIT_0 : + if(buff_state[0]==BUFF_READABLE) + read_port_state <= PORT_USE_0; + PORT_USE_0 : + if(read_done) + read_port_state <= PORT_WAIT_1; + PORT_WAIT_1 : + if(buff_state[1]==BUFF_READABLE) + read_port_state <= PORT_USE_1; + PORT_USE_1 : + if(read_done) + read_port_state <= PORT_WAIT_0; + endcase // case (read_port_state) + + assign read_ok = (read_port_state == PORT_USE_0) | (read_port_state == PORT_USE_1); + assign read_ptr = (read_port_state == PORT_USE_1); + + buff_sm #(.PORT_USE_FLAG(PORT_USE_0)) buff0_sm + (.clk(clk), .reset(reset), .clear(clear), + .write_done(write_done), .access_done(access_done), .access_skip_read(access_skip_read), .read_done(read_done), + .write_port_state(write_port_state), .access_port_state(access_port_state), .read_port_state(read_port_state), + .buff_state(buff_state[0])); + + buff_sm #(.PORT_USE_FLAG(PORT_USE_1)) buff1_sm + (.clk(clk), .reset(reset), .clear(clear), + .write_done(write_done), .access_done(access_done), .access_skip_read(access_skip_read), .read_done(read_done), + .write_port_state(write_port_state), .access_port_state(access_port_state), .read_port_state(read_port_state), + .buff_state(buff_state[1])); + +endmodule // dbsm + +module buff_sm + #(parameter PORT_USE_FLAG=0) + (input clk, input reset, input clear, + input write_done, input access_done, input access_skip_read, input read_done, + input [1:0] write_port_state, input [1:0] access_port_state, input [1:0] read_port_state, + output reg [1:0] buff_state); + + localparam BUFF_WRITABLE = 0; + localparam BUFF_ACCESSIBLE = 1; + localparam BUFF_READABLE = 2; + localparam BUFF_ERROR = 3; + + always @(posedge clk) + if(reset | clear) + buff_state <= BUFF_WRITABLE; + else + case(buff_state) + BUFF_WRITABLE : + if(write_done & (write_port_state == PORT_USE_FLAG)) + buff_state <= BUFF_ACCESSIBLE; + BUFF_ACCESSIBLE : + if(access_done & (access_port_state == PORT_USE_FLAG)) + if(access_skip_read) + buff_state <= BUFF_WRITABLE; + else + buff_state <= BUFF_READABLE; + BUFF_READABLE : + if(read_done & (read_port_state == PORT_USE_FLAG)) + buff_state <= BUFF_WRITABLE; + BUFF_ERROR : + ; + endcase + +endmodule // buff_sm diff --git a/fpga/usrp2/control_lib/double_buffer.v b/fpga/usrp2/control_lib/double_buffer.v new file mode 100644 index 000000000..8865bddee --- /dev/null +++ b/fpga/usrp2/control_lib/double_buffer.v @@ -0,0 +1,139 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module double_buffer + #(parameter BUF_SIZE = 9) + (input clk, input reset, input clear, + + // Random access interface to RAM + input access_we, + input access_stb, + output access_ok, + input access_done, + input access_skip_read, + input [BUF_SIZE-1:0] access_adr, + output [BUF_SIZE-1:0] access_len, + input [35:0] access_dat_i, + output [35:0] access_dat_o, + + // Write FIFO Interface + input [35:0] data_i, + input src_rdy_i, + output dst_rdy_o, + + // Read FIFO Interface + output [35:0] data_o, + output src_rdy_o, + input dst_rdy_i + ); + + wire [35:0] data_o_0, data_o_1; + + wire read, read_ok, read_ptr, read_done; + wire write, write_ok, write_ptr, write_done; + + wire [BUF_SIZE-1:0] rw0_adr, rw1_adr; + reg [BUF_SIZE-1:0] read_adr, write_adr; + reg [BUF_SIZE-1:0] len0, len1; + + assign data_o = read_ptr ? data_o_1 : data_o_0; + assign rw0_adr = (write_ok & ~write_ptr) ? write_adr : read_adr; + assign rw1_adr = (write_ok & write_ptr) ? write_adr : read_adr; + + wire [35:0] access_dat_o_0, access_dat_o_1; + wire access_ptr; + assign access_dat_o = access_ptr? access_dat_o_1 : access_dat_o_0; + + dbsm dbsm + (.clk(clk), .reset(reset), .clear(clear), + .write_ok(write_ok), .write_ptr(write_ptr), .write_done(write_done), + .access_ok(access_ok), .access_ptr(access_ptr), .access_done(access_done), .access_skip_read(access_skip_read), + .read_ok(read_ok), .read_ptr(read_ptr), .read_done(read_done)); + + // Port A for random access, Port B for FIFO read and write + ram_2port #(.DWIDTH(36),.AWIDTH(BUF_SIZE)) buffer0 + (.clka(clk),.ena(access_stb & access_ok & (access_ptr == 0)),.wea(access_we), + .addra(access_adr),.dia(access_dat_i),.doa(access_dat_o_0), + .clkb(clk),.enb((read & read_ok & ~read_ptr)|(write & write_ok & ~write_ptr) ),.web(write&write_ok&~write_ptr), + .addrb(rw0_adr),.dib(data_i),.dob(data_o_0)); + + ram_2port #(.DWIDTH(36),.AWIDTH(BUF_SIZE)) buffer1 + (.clka(clk),.ena(access_stb & access_ok & (access_ptr == 1)),.wea(access_we), + .addra(access_adr),.dia(access_dat_i),.doa(access_dat_o_1), + .clkb(clk),.enb((read & read_ok & read_ptr)|(write & write_ok & write_ptr) ),.web(write&write_ok&write_ptr), + .addrb(rw1_adr),.dib(data_i),.dob(data_o_1)); + + // Write into buffers + assign dst_rdy_o = write_ok; + assign write = src_rdy_i & write_ok; + assign write_done = write & data_i[33]; // done + always @(posedge clk) + if(reset | clear) + write_adr <= 0; + else + if(write_done) + begin + write_adr <= 0; + if(write_ptr) + len1 <= write_adr + 1; + else + len0 <= write_adr + 1; + end + else if(write) + write_adr <= write_adr + 1; + + assign access_len = access_ptr ? len1 : len0; + + reg [1:0] read_state; + localparam IDLE = 0; + localparam PRE_READ = 1; + localparam READING = 2; + + always @(posedge clk) + if(reset | clear) + begin + read_state <= IDLE; + read_adr <= 0; + end + else + case(read_state) + IDLE : + begin + read_adr <= 0; + if(read_ok) + read_state <= PRE_READ; + end + PRE_READ : + begin + read_state <= READING; + read_adr <= 1; + end + + READING : + if(dst_rdy_i) + begin + read_adr <= read_adr + 1; + if(data_o[33]) + read_state <= IDLE; + end + endcase // case (read_state) + + assign read = ~((read_state==READING)& ~dst_rdy_i); + assign read_done = data_o[33] & dst_rdy_i & src_rdy_o; + assign src_rdy_o = (read_state == READING); + +endmodule // double_buffer diff --git a/fpga/usrp2/control_lib/double_buffer_tb.v b/fpga/usrp2/control_lib/double_buffer_tb.v new file mode 100644 index 000000000..a9aae6956 --- /dev/null +++ b/fpga/usrp2/control_lib/double_buffer_tb.v @@ -0,0 +1,253 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module double_buffer_tb(); + + reg clk = 0; + reg rst = 1; + reg clear = 0; + initial #1000 rst = 0; + always #50 clk = ~clk; + + wire src_rdy_o; + reg src_rdy_i = 0; + wire dst_rdy_o; + + wire dst_rdy_i = 1; + wire [35:0] data_o; + reg [35:0] data_i; + + wire access_we, access_stb, access_done, access_ok, access_skip_read; + + wire [8:0] access_adr, access_len; + wire [35:0] dsp_to_buf, buf_to_dsp; + reg set_stb = 0; + + double_buffer db + (.clk(clk),.reset(rst),.clear(0), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(dsp_to_buf), .access_dat_o(buf_to_dsp), + + .data_i(data_i), .src_rdy_i(src_rdy_i), .dst_rdy_o(dst_rdy_o), + .data_o(data_o), .src_rdy_o(src_rdy_o), .dst_rdy_i(dst_rdy_i)); + + dspengine_16to8 dspengine_16to8 + (.clk(clk),.reset(rst),.clear(0), + .set_stb(set_stb), .set_addr(0), .set_data({13'h0,1'b1,18'h00400}), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(buf_to_dsp), .access_dat_o(dsp_to_buf)); + + always @(posedge clk) + if(src_rdy_o & dst_rdy_i) + begin + $display("SOF %d, EOF %d, OCC %x, DAT %x",data_o[32],data_o[33],data_o[35:34],data_o[31:0]); + if(data_o[33]) + $display(); + end + initial $dumpfile("double_buffer_tb.vcd"); + initial $dumpvars(0,double_buffer_tb); + + initial + begin + @(negedge rst); + @(posedge clk); + @(posedge clk); + @(posedge clk); + + // Passthrough + $display("Passthrough"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'hFFFFFFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h04050607}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h08090a0b}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h0c0d0e0f}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + repeat (5) + @(posedge clk); + + $display("Enabled"); + set_stb <= 1; + @(posedge clk); + set_stb <= 0; + + @(posedge clk); + $display("Non-IF Data Passthrough"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'hC0000000}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h14151617}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h18191a1b}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h1c1d1e1f}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("No StreamID, No Trailer, Even"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h0000FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h01000200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h03000400}; + src_rdy_i <= 0; + @(posedge clk); + @(posedge clk); + @(posedge clk); + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h05000600}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h07000800}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h09000a00}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h0b000c00}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("No StreamID, No Trailer, Odd"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h0000FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h11001200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h13001400}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h15001600}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h17001800}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h19001a00}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("No StreamID, Trailer, Even"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h0400FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h21002200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h23002400}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h25002600}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h27002800}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h29002a00}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("No StreamID, Trailer, Odd"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h0400FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h31003200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h33003400}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h35003600}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h39003a00}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("StreamID, No Trailer, Even"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h1000FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h11001200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h13001400}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h15001600}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'h17001800}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'h19001a00}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + while(~dst_rdy_o) + @(posedge clk); + + $display("StreamID, Trailer, Odd"); + src_rdy_i <= 1; + data_i <= { 2'b00,1'b0,1'b1,32'h1400FFFF}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha100a200}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha300a400}; + src_rdy_i <= 0; + @(posedge clk); + src_rdy_i <= 1; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha500a600}; + @(posedge clk); + data_i <= { 2'b00,1'b0,1'b0,32'ha700a800}; + @(posedge clk); + data_i <= { 2'b00,1'b1,1'b0,32'hbbb0bbb0}; + @(posedge clk); + src_rdy_i <= 0; + @(posedge clk); + + end + + initial #28000 $finish; +endmodule // double_buffer_tb diff --git a/fpga/usrp2/control_lib/gpio_atr.v b/fpga/usrp2/control_lib/gpio_atr.v new file mode 100644 index 000000000..82d72b815 --- /dev/null +++ b/fpga/usrp2/control_lib/gpio_atr.v @@ -0,0 +1,71 @@ + +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + +module gpio_atr + #(parameter BASE = 0, + parameter WIDTH = 32) + (input clk, input reset, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + input rx, input tx, + inout [WIDTH-1:0] gpio, + output reg [31:0] gpio_readback + ); + + wire [WIDTH-1:0] ddr, in_idle, in_tx, in_rx, in_fdx; + reg [WIDTH-1:0] rgpio, igpio; + + setting_reg #(.my_addr(BASE+0), .width(WIDTH)) reg_idle + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data), + .out(in_idle),.changed()); + + setting_reg #(.my_addr(BASE+1), .width(WIDTH)) reg_rx + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data), + .out(in_rx),.changed()); + + setting_reg #(.my_addr(BASE+2), .width(WIDTH)) reg_tx + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data), + .out(in_tx),.changed()); + + setting_reg #(.my_addr(BASE+3), .width(WIDTH)) reg_fdx + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data), + .out(in_fdx),.changed()); + + setting_reg #(.my_addr(BASE+4), .width(WIDTH)) reg_ddr + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data), + .out(ddr),.changed()); + + always @(posedge clk) + case({tx,rx}) + 2'b00: rgpio <= in_idle; + 2'b01: rgpio <= in_rx; + 2'b10: rgpio <= in_tx; + 2'b11: rgpio <= in_fdx; + endcase // case ({tx,rx}) + + integer n; + always @* + for(n=0;n<WIDTH;n=n+1) + igpio[n] <= ddr[n] ? rgpio[n] : 1'bz; + + assign gpio = igpio; + + always @(posedge clk) + gpio_readback <= gpio; + +endmodule // gpio_atr diff --git a/fpga/usrp2/fifo/Makefile.srcs b/fpga/usrp2/fifo/Makefile.srcs index 02c567049..28d506571 100644 --- a/fpga/usrp2/fifo/Makefile.srcs +++ b/fpga/usrp2/fifo/Makefile.srcs @@ -6,6 +6,7 @@ # FIFO Sources ################################################## FIFO_SRCS = $(abspath $(addprefix $(BASE_DIR)/../fifo/, \ +add_routing_header.v \ buffer_int.v \ buffer_int2.v \ buffer_pool.v \ diff --git a/fpga/usrp2/fifo/add_routing_header.v b/fpga/usrp2/fifo/add_routing_header.v new file mode 100644 index 000000000..ee6a635f5 --- /dev/null +++ b/fpga/usrp2/fifo/add_routing_header.v @@ -0,0 +1,47 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module add_routing_header + #(parameter PORT_SEL = 0, + parameter PROT_ENG_FLAGS = 1) + (input clk, input reset, input clear, + input [35:0] data_i, input src_rdy_i, output dst_rdy_o, + output [35:0] data_o, output src_rdy_o, input dst_rdy_i); + + reg [1:0] line; + wire [1:0] port_sel_bits = PORT_SEL; + wire [15:0] len = data_i[15:0]; + + always @(posedge clk) + if(reset) + line <= PROT_ENG_FLAGS ? 0 : 1; + else + if(src_rdy_o & dst_rdy_i) + if(data_o[33]) + line <= PROT_ENG_FLAGS ? 0 : 1; + else + if(line != 3) + line <= line + 1; + + assign data_o = (line == 0) ? {4'b0001, 13'b0, port_sel_bits, 1'b1, len[13:0],2'b00} : + (line == 1) ? {3'b000, (PROT_ENG_FLAGS ? 1'b0: 1'b1), data_i[31:0]} : + data_i[35:0]; + + assign dst_rdy_o = dst_rdy_i & (line != 0); + assign src_rdy_o = src_rdy_i; + +endmodule // add_routing_header diff --git a/fpga/usrp2/gpif/gpif.v b/fpga/usrp2/gpif/gpif.v index 51d6e8ba9..e5b63d5a3 100644 --- a/fpga/usrp2/gpif/gpif.v +++ b/fpga/usrp2/gpif/gpif.v @@ -37,10 +37,13 @@ module gpif input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o, output tx_underrun, output rx_overrun, - input [7:0] frames_per_packet, input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl, + input [7:0] frames_per_packet, output [31:0] debug0, output [31:0] debug1 ); + assign tx_underrun = 0; + assign rx_overrun = 0; + wire WR = gpif_ctl[0]; wire RD = gpif_ctl[1]; wire OE = gpif_ctl[2]; @@ -62,8 +65,8 @@ module gpif wire [18:0] tx19_data; wire tx19_src_rdy, tx19_dst_rdy; - wire [35:0] tx36_data, tx_data; - wire tx36_src_rdy, tx36_dst_rdy, tx_src_rdy, tx_dst_rdy; + wire [35:0] tx36_data; + wire tx36_src_rdy, tx36_dst_rdy; wire [18:0] ctrl_data; wire ctrl_src_rdy, ctrl_dst_rdy; @@ -95,13 +98,13 @@ module gpif fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36 (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy), - .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy)); + .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i)); // //////////////////////////////////////////// // RX Data Path - wire [35:0] rx36_data, rx_data; - wire rx36_src_rdy, rx36_dst_rdy, rx_src_rdy, rx_dst_rdy; + wire [35:0] rx36_data; + wire rx36_src_rdy, rx36_dst_rdy; wire [18:0] rx19_data, splt_data; wire rx19_src_rdy, rx19_dst_rdy, splt_src_rdy, splt_dst_rdy; wire [18:0] resp_data, resp_int1, resp_int2; @@ -110,7 +113,7 @@ module gpif fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_fifo36 (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), + .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o), .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy)); fifo36_to_fifo19 #(.LE(1)) f36_to_f19 @@ -166,81 +169,6 @@ module gpif .data_i(resp_int2), .src_rdy_i(resp_src_rdy_int2), .dst_rdy_o(resp_dst_rdy_int2), .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy)); - // //////////////////////////////////////////////////////////////////// - // Debug support, timed and loopback - // RX side muxes test data into the same stream - wire [35:0] timedrx_data, loopbackrx_data, testrx_data; - wire [35:0] timedtx_data, loopbacktx_data, testtx_data; - wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy, - testrx_src_rdy, testrx_dst_rdy; - wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy, - testtx_src_rdy, testtx_dst_rdy; - wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int; - - wire [31:0] total, crc_err, seq_err, len_err; - wire sel_testtx = test_ctrl[0]; - wire sel_loopbacktx = test_ctrl[1]; - wire pkt_src_enable = test_ctrl[2]; - wire pkt_sink_enable = test_ctrl[3]; - - fifo36_mux rx_test_mux_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy), - .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy), - .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy)); - - fifo36_mux rx_test_mux_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy), - .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o), - .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy)); - - fifo_short #(.WIDTH(36)) loopback_fifo - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx), - .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy), - .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy)); - - // Crossbar used as a demux for switching TX stream to main DSP or to test logic - crossbar36 tx_crossbar_lvl_1 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_testtx), - .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy), - .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i), - .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) ); - - crossbar36 tx_crossbar_lvl_2 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .cross(sel_loopbacktx), - .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy), - .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input - .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy), - .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) ); - - // Fixed rate TX traffic consumer - fifo_pacer tx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable), - .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy), - .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int), - .underrun(tx_underrun), .overrun()); - - packet_verifier32 pktver32 - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), - .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int), - .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err)); - - // Fixed rate RX traffic generator - vita_pkt_gen pktgen - (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), - .len(test_len), - .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int)); - - fifo_pacer rx_pacer - (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable), - .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int), - .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy), - .underrun(), .overrun(rx_overrun)); - // //////////////////////////////////////////// // DEBUG diff --git a/fpga/usrp2/gpif/lint b/fpga/usrp2/gpif/lint new file mode 100755 index 000000000..4316c89a9 --- /dev/null +++ b/fpga/usrp2/gpif/lint @@ -0,0 +1,2 @@ +iverilog -Wall -y . -y ../fifo/ -y ../control_lib/ -y ../models/ -y ../coregen/ -y ../simple_gemac/ -y ../sdr_lib/ -y ../vrt/ gpif.v 2>&1 | grep -v coregen | grep -v models + diff --git a/fpga/usrp2/sdr_lib/Makefile.srcs b/fpga/usrp2/sdr_lib/Makefile.srcs index defbced17..629b92cc8 100644 --- a/fpga/usrp2/sdr_lib/Makefile.srcs +++ b/fpga/usrp2/sdr_lib/Makefile.srcs @@ -25,8 +25,11 @@ cordic_z24.v \ cordic_stage.v \ dsp_core_rx.v \ dsp_core_tx.v \ +dspengine_16to8.v \ hb_dec.v \ hb_interp.v \ +pipectrl.v \ +pipestage.v \ round.v \ round_reg.v \ round_sd.v \ diff --git a/fpga/usrp2/sdr_lib/clip_reg.v b/fpga/usrp2/sdr_lib/clip_reg.v index d5e98d982..9098fd5b8 100644 --- a/fpga/usrp2/sdr_lib/clip_reg.v +++ b/fpga/usrp2/sdr_lib/clip_reg.v @@ -23,16 +23,24 @@ module clip_reg #(parameter bits_in=0, - parameter bits_out=0) + parameter bits_out=0, + parameter STROBED=1'b0) (input clk, input [bits_in-1:0] in, - output reg [bits_out-1:0] out); + output reg [bits_out-1:0] out, + input strobe_in, + output reg strobe_out); wire [bits_out-1:0] temp; clip #(.bits_in(bits_in),.bits_out(bits_out)) clip (.in(in),.out(temp)); + + always @(posedge clk) + strobe_out <= strobe_in; + always @(posedge clk) - out <= temp; + if(strobe_in | ~STROBED) + out <= temp; endmodule // clip_reg diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx.v b/fpga/usrp2/sdr_lib/dsp_core_rx.v index 639744de7..d1c7e238a 100644 --- a/fpga/usrp2/sdr_lib/dsp_core_rx.v +++ b/fpga/usrp2/sdr_lib/dsp_core_rx.v @@ -94,8 +94,10 @@ module dsp_core_rx .xi({adc_i_mux[23],adc_i_mux}),. yi({adc_q_mux[23],adc_q_mux}), .zi(phase[31:8]), .xo(i_cordic),.yo(q_cordic),.zo() ); - clip_reg #(.bits_in(25), .bits_out(24)) clip_i (.clk(clk), .in(i_cordic), .out(i_cordic_clip)); - clip_reg #(.bits_in(25), .bits_out(24)) clip_q (.clk(clk), .in(q_cordic), .out(q_cordic_clip)); + clip_reg #(.bits_in(25), .bits_out(24)) clip_i + (.clk(clk), .in(i_cordic), .strobe_in(1'b1), .out(i_cordic_clip)); + clip_reg #(.bits_in(25), .bits_out(24)) clip_q + (.clk(clk), .in(q_cordic), .strobe_in(1'b1), .out(q_cordic_clip)); // CIC decimator 24 bit I/O cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate), diff --git a/fpga/usrp2/sdr_lib/dspengine_16to8.v b/fpga/usrp2/sdr_lib/dspengine_16to8.v new file mode 100644 index 000000000..53c5d29da --- /dev/null +++ b/fpga/usrp2/sdr_lib/dspengine_16to8.v @@ -0,0 +1,221 @@ + +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module dspengine_16to8 + #(parameter BASE = 0, + parameter BUF_SIZE = 9) + (input clk, input reset, input clear, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i + ); + + wire convert; + wire [17:0] scale_factor; + + setting_reg #(.my_addr(BASE),.width(19)) sr_16to8 + (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({convert,scale_factor}),.changed()); + + reg [2:0] dsp_state; + localparam DSP_IDLE = 0; + localparam DSP_PARSE_HEADER = 1; + localparam DSP_CONVERT = 2; + localparam DSP_CONVERT_DRAIN_PIPE = 3; + localparam DSP_READ_TRAILER = 4; + localparam DSP_WRITE_TRAILER = 5; + localparam DSP_WRITE_HEADER = 6; + localparam DSP_DONE = 7; + + // Parse VITA header + wire is_if_data = (access_dat_i[31:29] == 3'b000); + wire has_streamid = access_dat_i[28]; + wire has_classid = access_dat_i[27]; + wire has_trailer = access_dat_i[26]; + // 25:24 reserved, aka SOB/EOB + wire has_secs = |access_dat_i[23:22]; + wire has_tics = |access_dat_i[21:20]; + wire [3:0] hdr_length = 1 + has_streamid + has_classid + has_classid + has_secs + has_tics + has_tics; + + wire [35:0] prod_i, prod_q; + wire [15:0] scaled_i, scaled_q; + wire [7:0] i8, q8; + reg [7:0] i8_reg, q8_reg; + wire stb_read, stb_mult, stb_clip, stb_round, val_read, val_mult, val_clip, val_round; + wire stb_out, stb_reg; + reg even; + + reg [BUF_SIZE-1:0] read_adr, write_adr; + reg has_trailer_reg; + + wire last = (read_adr + 1) == (access_len - has_trailer_reg); + wire last_o, even_o; + + wire stb_write = stb_out & (even_o | last_o); + wire send_to_pipe = ~stb_write & (dsp_state == DSP_CONVERT); + reg [31:0] new_header, new_trailer, trailer_mask; + reg [15:0] length; + reg wait_for_trailer; + + always @(posedge clk) + if(reset | clear) + dsp_state <= DSP_IDLE; + else + case(dsp_state) + DSP_IDLE : + begin + read_adr <= 0; + write_adr <= 0; + even <= 0; + if(access_ok) + dsp_state <= DSP_PARSE_HEADER; + end + + DSP_PARSE_HEADER : + begin + has_trailer_reg <= has_trailer; + new_header[31:16] <= access_dat_i[31:16]; + new_header[15:0] <= access_len; + length <= access_len; + if(is_if_data & convert) + begin + read_adr <= hdr_length; + write_adr <= hdr_length; + dsp_state <= DSP_CONVERT; + end + else + dsp_state <= DSP_WRITE_HEADER; + end + + DSP_CONVERT: + begin + new_header[26] <= 1'b1; // all converted packets have a trailer + if(stb_write) + write_adr <= write_adr + 1; + else if(stb_read) // should always be 1 if we are here + begin + read_adr <= read_adr + 1; + even <= ~even; + if(last) + begin + dsp_state <= DSP_CONVERT_DRAIN_PIPE; + if(~even) + trailer_mask <= 32'h00400400; + else + trailer_mask <= 32'h00400000; + end + end + end + + DSP_CONVERT_DRAIN_PIPE : + if(stb_write) + begin + write_adr <= write_adr + 1; + if(last_o) + if(has_trailer_reg) + begin + dsp_state <= DSP_READ_TRAILER; + wait_for_trailer <= 0; + end + else + begin + dsp_state <= DSP_WRITE_TRAILER; + new_trailer <= trailer_mask; + end + end + + DSP_READ_TRAILER : + begin + wait_for_trailer <= 1; + if(wait_for_trailer) + dsp_state <= DSP_WRITE_TRAILER; + new_trailer <= access_dat_i[31:0] | trailer_mask; + end + + DSP_WRITE_TRAILER : + begin + dsp_state <= DSP_WRITE_HEADER; + write_adr <= 0; + new_header[15:0] <= write_adr + 1; + end + + DSP_WRITE_HEADER : + dsp_state <= DSP_DONE; + + DSP_DONE : + begin + read_adr <= 0; + write_adr <= 0; + dsp_state <= DSP_IDLE; + end + endcase // case (dsp_state) + + assign access_skip_read = 0; + assign access_done = (dsp_state == DSP_DONE); + + assign access_stb = 1; + + assign access_we = (dsp_state == DSP_WRITE_HEADER) | + (dsp_state == DSP_WRITE_TRAILER) | + stb_write; + + assign access_dat_o = (dsp_state == DSP_WRITE_HEADER) ? { 4'h1, new_header } : + (dsp_state == DSP_WRITE_TRAILER) ? { 4'h2, new_trailer } : + (last_o&~even_o) ? {4'h0, 16'd0, i8, q8 } : + {4'h0, i8, q8, i8_reg, q8_reg }; + + assign access_adr = (stb_write|(dsp_state == DSP_WRITE_HEADER)|(dsp_state == DSP_WRITE_TRAILER)) ? write_adr : read_adr; + + // DSP Pipeline + + wire [15:0] i16 = access_dat_i[31:16]; + wire [15:0] q16 = access_dat_i[15:0]; + + pipectrl #(.STAGES(4), .TAGWIDTH(2)) pipectrl + (.clk(clk), .reset(reset), + .src_rdy_i(send_to_pipe), .dst_rdy_o(), // dst_rdy_o will always be 1 since dst_rdy_i is 1, below + .src_rdy_o(stb_out), .dst_rdy_i(1), // always accept output of chain + .strobes({stb_round,stb_clip,stb_mult,stb_read}), .valids({val_round,val_clip,val_mult,val_read}), + .tag_i({last,even}), .tag_o({last_o,even_o})); + + always @(posedge clk) + if(stb_out & ~even_o) + {i8_reg,q8_reg} <= {i8,q8}; + + MULT18X18S mult_i + (.P(prod_i), .A(scale_factor), .B({i16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) ); + clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_i + (.clk(clk), .in(prod_i[35:12]), .out(scaled_i), .strobe_in(stb_clip), .strobe_out()); + round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_i + (.clk(clk), .reset(reset), .in(scaled_i), .strobe_in(stb_round), .out(i8), .strobe_out()); + + MULT18X18S mult_q + (.P(prod_q), .A(scale_factor), .B({q16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) ); + clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_q + (.clk(clk), .in(prod_q[35:12]), .out(scaled_q), .strobe_in(stb_clip), .strobe_out()); + round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_q + (.clk(clk), .reset(reset), .in(scaled_q), .strobe_in(stb_round), .out(q8), .strobe_out()); + +endmodule // dspengine_16to8 diff --git a/fpga/usrp2/sdr_lib/pipectrl.v b/fpga/usrp2/sdr_lib/pipectrl.v new file mode 100644 index 000000000..85d0ce04f --- /dev/null +++ b/fpga/usrp2/sdr_lib/pipectrl.v @@ -0,0 +1,66 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +// Control DSP pipeline with 1 cycle per stage. Minimum 2 stages or this won't work +module pipectrl + #(parameter STAGES = 2, + parameter TAGWIDTH = 1) + (input clk, + input reset, + input src_rdy_i, + output dst_rdy_o, + output src_rdy_o, + input dst_rdy_i, + output [STAGES-1:0] strobes, + output [STAGES-1:0] valids, + input [TAGWIDTH-1:0] tag_i, + output [TAGWIDTH-1:0] tag_o); + + wire new_input = src_rdy_i & dst_rdy_o; + wire new_output = src_rdy_o & dst_rdy_i; + wire [TAGWIDTH-1:0] tags [STAGES-1:0]; + + assign dst_rdy_o = ~valids[0] | strobes[1]; + + pipestage #(.TAGWIDTH(TAGWIDTH)) head + (.clk(clk),.reset(reset), .stb_in(strobes[0]), .stb_out(strobes[1]),.valid(valids[0]), + .tag_in(tag_i), .tag_out(tags[0])); + assign strobes[0] = src_rdy_i & (~valids[0] | strobes[1]); + + genvar i; + generate + for(i = 1; i < STAGES - 1; i = i + 1) + begin : gen_stages + pipestage #(.TAGWIDTH(TAGWIDTH)) pipestage + (.clk(clk),.reset(reset), .stb_in(strobes[i]),.stb_out(strobes[i+1]),.valid(valids[i]), + .tag_in(tags[i-1]),.tag_out(tags[i])); + assign strobes[i] = valids[i-1] & (~valids[i] | strobes[i+1]); + end + endgenerate + + pipestage #(.TAGWIDTH(TAGWIDTH)) tail + (.clk(clk),.reset(reset), .stb_in(strobes[STAGES-1]), .stb_out(dst_rdy_i),.valid(valids[STAGES-1]), + .tag_in(tags[STAGES-2]), .tag_out(tags[STAGES-1])); + assign strobes[STAGES-1] = valids[STAGES-2] & (~valids[STAGES-1] | new_output); + + assign src_rdy_o = valids[STAGES-1]; + + assign tag_o = tags[STAGES-1]; + +endmodule // pipectrl + + diff --git a/fpga/usrp2/sdr_lib/pipestage.v b/fpga/usrp2/sdr_lib/pipestage.v new file mode 100644 index 000000000..011afb1ba --- /dev/null +++ b/fpga/usrp2/sdr_lib/pipestage.v @@ -0,0 +1,45 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +module pipestage + #(parameter TAGWIDTH = 1) + (input clk, + input reset, + input stb_in, + input stb_out, + output reg valid, + input [TAGWIDTH-1:0] tag_in, + output reg [TAGWIDTH-1:0] tag_out); + + always @(posedge clk) + if(reset) + begin + valid <= 0; + tag_out <= 0; + end + else if(stb_in) + begin + valid <= 1; + tag_out <= tag_in; + end + else if(stb_out) + begin + valid <= 0; + tag_out <= 0; + end + +endmodule // pipestage diff --git a/fpga/usrp2/sdr_lib/round.v b/fpga/usrp2/sdr_lib/round.v index 7a137d702..26d5a4cf4 100644 --- a/fpga/usrp2/sdr_lib/round.v +++ b/fpga/usrp2/sdr_lib/round.v @@ -2,7 +2,7 @@ // // USRP - Universal Software Radio Peripheral // -// Copyright (C) 2007 Matt Ettus +// Copyright (C) 2011 Matt Ettus // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by @@ -24,12 +24,36 @@ module round #(parameter bits_in=0, - parameter bits_out=0) + parameter bits_out=0, + parameter round_to_zero=0, // original behavior + parameter round_to_nearest=1, // lowest noise + parameter trunc=0) // round to negative infinity (input [bits_in-1:0] in, output [bits_out-1:0] out, output [bits_in-bits_out:0] err); - assign out = in[bits_in-1:bits_in-bits_out] + (in[bits_in-1] & |in[bits_in-bits_out-1:0]); + wire round_corr,round_corr_trunc,round_corr_rtz,round_corr_nearest,round_corr_nearest_safe; + + assign round_corr_trunc = 0; + assign round_corr_rtz = (in[bits_in-1] & |in[bits_in-bits_out-1:0]); + assign round_corr_nearest = in[bits_in-bits_out-1]; + + generate + if(bits_in-bits_out > 1) + assign round_corr_nearest_safe = (~in[bits_in-1] & (&in[bits_in-2:bits_out])) ? 0 : + round_corr_nearest; + else + assign round_corr_nearest_safe = round_corr_nearest; + endgenerate + + + assign round_corr = round_to_nearest ? round_corr_nearest_safe : + trunc ? round_corr_trunc : + round_to_zero ? round_corr_rtz : + 0; // default to trunc + + assign out = in[bits_in-1:bits_in-bits_out] + round_corr; + assign err = in - {out,{(bits_in-bits_out){1'b0}}}; endmodule // round diff --git a/fpga/usrp2/sdr_lib/round_sd.v b/fpga/usrp2/sdr_lib/round_sd.v index aeeb3502f..94584f6ef 100644 --- a/fpga/usrp2/sdr_lib/round_sd.v +++ b/fpga/usrp2/sdr_lib/round_sd.v @@ -2,7 +2,8 @@ module round_sd #(parameter WIDTH_IN=18, - parameter WIDTH_OUT=16) + parameter WIDTH_OUT=16, + parameter DISABLE_SD=0) (input clk, input reset, input [WIDTH_IN-1:0] in, input strobe_in, output [WIDTH_OUT-1:0] out, output strobe_out); @@ -15,7 +16,7 @@ module round_sd sign_extend #(.bits_in(ERR_WIDTH),.bits_out(WIDTH_IN)) ext_err (.in(err), .out(err_ext)); add2_and_clip_reg #(.WIDTH(WIDTH_IN)) add2_and_clip_reg - (.clk(clk), .rst(reset), .in1(in), .in2(err_ext), .strobe_in(strobe_in), .sum(sum), .strobe_out(strobe_out)); + (.clk(clk), .rst(reset), .in1(in), .in2((DISABLE_SD == 0) ? err_ext : 0), .strobe_in(strobe_in), .sum(sum), .strobe_out(strobe_out)); round #(.bits_in(WIDTH_IN),.bits_out(WIDTH_OUT)) round_sum (.in(sum), .out(out), .err(err)); diff --git a/fpga/usrp2/sdr_lib/round_tb.v b/fpga/usrp2/sdr_lib/round_tb.v new file mode 100644 index 000000000..ddc464f4a --- /dev/null +++ b/fpga/usrp2/sdr_lib/round_tb.v @@ -0,0 +1,61 @@ +// -*- verilog -*- +// +// USRP - Universal Software Radio Peripheral +// +// Copyright (C) 2011 Matt Ettus +// +// This program is free software; you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation; either version 2 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program; if not, write to the Free Software +// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA +// + +// Rounding "macro" +// Keeps the topmost bits, does proper 2s comp round to zero (unbiased truncation) + +module round_tb(); + + localparam IW=8; + localparam OW=4; + localparam EW=IW-OW+1; + + reg signed [IW-1:0] in; + wire signed [OW-1:0] out; + wire signed [EW-1:0] err; + + round #(.bits_in(IW), + .bits_out(OW), + .round_to_zero(0), // original behavior + .round_to_nearest(1), // lowest noise + .trunc(0)) // round to negative infinity + round (.in(in),.out(out),.err(err)); + + initial $dumpfile("round_tb.vcd"); + initial $dumpvars(0,round_tb); + + wire signed [IW-1:0] out_round = {out,{IW-OW{1'b0}}}; + + initial + begin + in <= -129; + #1; + repeat (260) + begin + in <= in + 1; + #1; + $display("In %d, out %d, out_rnd %d, err %d, real err %d",in,out,out_round,-err,out_round-in); + #1; + end + $finish; + end + +endmodule // round diff --git a/fpga/usrp2/sdr_lib/rx_dcoffset.v b/fpga/usrp2/sdr_lib/rx_dcoffset.v index 9840e9e1f..04d7795c0 100644 --- a/fpga/usrp2/sdr_lib/rx_dcoffset.v +++ b/fpga/usrp2/sdr_lib/rx_dcoffset.v @@ -42,8 +42,9 @@ module rx_dcoffset end else if(set_now) begin - //integrator <= {set_data[30:0],{(31-int_width){1'b0}}}; fixed <= set_data[31]; + if(set_data[30]) + integrator <= {set_data[29:0],{(int_width-30){1'b0}}}; end else if(~fixed) integrator <= integrator + {{(alpha_shift){out[WIDTH-1]}},out}; diff --git a/fpga/usrp2/sdr_lib/small_hb_int.v b/fpga/usrp2/sdr_lib/small_hb_int.v index 387f9e1cb..b69c45413 100644 --- a/fpga/usrp2/sdr_lib/small_hb_int.v +++ b/fpga/usrp2/sdr_lib/small_hb_int.v @@ -73,8 +73,8 @@ module small_hb_int final_round (.clk(clk),.in(accum),.out(accum_rnd)); wire [WIDTH-1:0] clipped; - clip_reg #(.bits_in(WIDTH+3),.bits_out(WIDTH)) - final_clip (.clk(clk),.in(accum_rnd),.out(clipped)); + clip_reg #(.bits_in(WIDTH+3),.bits_out(WIDTH)) final_clip + (.clk(clk),.in(accum_rnd),.strobe_in(1'b1), .out(clipped)); reg [WIDTH-1:0] saved, saved_d3; always @(posedge clk) diff --git a/fpga/usrp2/top/B100/Makefile b/fpga/usrp2/top/B100/Makefile new file mode 100644 index 000000000..3ddef1024 --- /dev/null +++ b/fpga/usrp2/top/B100/Makefile @@ -0,0 +1,14 @@ +# +# Copyright 2011 Ettus Research LLC +# + +all: B100 + find -name "*.twr" | xargs grep constraint | grep met + +clean: + rm -rf build* + +B100: + make -f Makefile.$@ bin + +.PHONY: all clean diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v index e11a4c37e..86bf747a0 100644 --- a/fpga/usrp2/top/B100/u1plus_core.v +++ b/fpga/usrp2/top/B100/u1plus_core.v @@ -56,17 +56,14 @@ module u1plus_core localparam SR_CLEAR_TX_FIFO = 62; // 1 reg localparam SR_GLOBAL_RESET = 63; // 1 reg - wire [7:0] COMPAT_NUM = 8'd5; + localparam SR_GPIO = 128; // 5 regs wire wb_clk = clk_fpga; wire wb_rst, global_reset; wire pps_int; wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_leds, reg_cgen_ctrl, reg_test; - wire [15:0] xfer_rate = 0; - wire [7:0] test_rate; - wire [3:0] test_ctrl; + reg [15:0] reg_cgen_ctrl, reg_test; wire [7:0] set_addr; wire [31:0] set_data; @@ -90,7 +87,6 @@ module u1plus_core reset_sync reset_sync_wb(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst)); reset_sync reset_sync_gp(.clk(gpif_clk), .reset_in(rst_fpga | global_reset), .reset_out(gpif_rst)); - wire [15:0] test_len; // ///////////////////////////////////////////////////////////////////////////////////// // GPIF Slave to Wishbone Master @@ -135,7 +131,7 @@ module u1plus_core .tx_underrun(tx_underrun_gpif), .rx_overrun(rx_overrun_gpif), - .frames_per_packet(frames_per_packet), .test_len(test_len), .test_rate(test_rate), .test_ctrl(test_ctrl), + .frames_per_packet(frames_per_packet), .debug0(debug0), .debug1(debug1)); // ///////////////////////////////////////////////////////////////////////// @@ -166,7 +162,7 @@ module u1plus_core .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain0 + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0 (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .overrun(rx_overrun_dsp0), @@ -189,7 +185,7 @@ module u1plus_core .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain1 + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1 (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .overrun(rx_overrun_dsp1), @@ -252,14 +248,20 @@ module u1plus_core wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), - .s0_addr(4'h0), .s0_mask(4'hF), .s1_addr(4'h1), .s1_mask(4'hF), - .s2_addr(4'h2), .s2_mask(4'hF), .s3_addr(4'h3), .s3_mask(4'hF), - .s4_addr(4'h4), .s4_mask(4'hF), .s5_addr(4'h5), .s5_mask(4'hF), - .s6_addr(4'h6), .s6_mask(4'hF), .s7_addr(4'h7), .s7_mask(4'hF), - .s8_addr(4'h8), .s8_mask(4'hE), .s9_addr(4'hf), .s9_mask(4'hF), // slave 8 is double wide - .sa_addr(4'ha), .sa_mask(4'hF), .sb_addr(4'hb), .sb_mask(4'hF), - .sc_addr(4'hc), .sc_mask(4'hF), .sd_addr(4'hd), .sd_mask(4'hF), - .se_addr(4'he), .se_mask(4'hF), .sf_addr(4'hf), .sf_mask(4'hF)) + .s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs + .s1_addr(4'h1), .s1_mask(4'hF), // Unused + .s2_addr(4'h2), .s2_mask(4'hF), // SPI + .s3_addr(4'h3), .s3_mask(4'hF), // I2C + .s4_addr(4'h4), .s4_mask(4'hF), // Unused + .s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0 + .s6_addr(4'h6), .s6_mask(4'hF), // Unused + .s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX + .s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide + // slaves 9-f alias to slave 1, all are unused + .s9_addr(4'h1), .s9_mask(4'hF), + .sa_addr(4'h1), .sa_mask(4'hF), .sb_addr(4'h1), .sb_mask(4'hF), + .sc_addr(4'h1), .sc_mask(4'hF), .sd_addr(4'h1), .sd_mask(4'hF), + .se_addr(4'h1), .se_mask(4'hF), .sf_addr(4'h1), .sf_mask(4'hF)) wb_1master (.clk_i(wb_clk),.rst_i(wb_rst), .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), @@ -297,76 +299,48 @@ module u1plus_core .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); - assign s5_ack = 0; + assign s1_ack = 0; assign s4_ack = 0; assign s5_ack = 0; assign s6_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; // ///////////////////////////////////////////////////////////////////////////////////// // Slave 0, Misc LEDs, Switches, controls - localparam REG_LEDS = 7'd0; // out localparam REG_CGEN_CTRL = 7'd4; // out localparam REG_CGEN_ST = 7'd6; // in localparam REG_TEST = 7'd8; // out localparam REG_RX_FRAMELEN = 7'd10; // in localparam REG_TX_FRAMELEN = 7'd12; // out - localparam REG_XFER_RATE = 7'd14; // out - localparam REG_COMPAT = 7'd16; // in always @(posedge wb_clk) if(wb_rst) begin - reg_leds <= 0; reg_cgen_ctrl <= 2'b11; reg_test <= 0; - //xfer_rate <= 0; frames_per_packet <= 0; end else if(s0_cyc & s0_stb & s0_we) case(s0_adr[6:0]) - REG_LEDS : - reg_leds <= s0_dat_mosi; REG_CGEN_CTRL : reg_cgen_ctrl <= s0_dat_mosi; REG_TEST : reg_test <= s0_dat_mosi; REG_RX_FRAMELEN : frames_per_packet <= s0_dat_mosi[7:0]; - //REG_XFER_RATE : - //xfer_rate <= s0_dat_mosi; endcase // case (s0_adr[6:0]) - assign test_ctrl = xfer_rate[11:8]; - assign test_rate = xfer_rate[7:0]; - assign test_len = reg_test[15:0]; - assign debug_led = {run_tx, (run_rx0 | run_rx1), cgen_st_ld}; assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; - assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : - (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : + assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : (s0_adr[6:0] == REG_TEST) ? reg_test : - (s0_adr[6:0] == REG_COMPAT) ? { 8'd0, COMPAT_NUM } : 16'hBEEF; assign s0_ack = s0_stb & s0_cyc; // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 1, UART - // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock - -/* - simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart - (.clk_i(wb_clk),.rst_i(wb_rst), - .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), - .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), - .rx_int_o(),.tx_int_o(), - .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); -*/ - - // ///////////////////////////////////////////////////////////////////////////////////// // Slave 2, SPI spi_top16 shared_spi @@ -394,39 +368,31 @@ module u1plus_core IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); // ///////////////////////////////////////////////////////////////////////// - // GPIOs -- Slave #4 + // GPIOs - wire [31:0] atr_lines; - wire [31:0] debug_gpio_0, debug_gpio_1; + wire [31:0] gpio_readback; - nsgpio16LE - nsgpio16LE(.clk_i(wb_clk),.rst_i(wb_rst), - .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we), - .dat_i(s4_dat_mosi),.dat_o(s4_dat_miso),.ack_o(s4_ack), - .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1), - .gpio( {io_tx,io_rx} ) ); + gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) + gpio_atr(.clk(wb_clk),.reset(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .rx(run_rx0 | run_rx1), .tx(run_tx), + .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); // ///////////////////////////////////////////////////////////////////////// // Settings Bus -- Slave #8 + 9 // only have 64 regs, 32 bits each with current setup... - settings_bus_16LE #(.AWIDTH(11),.RWIDTH(6)) settings_bus_16LE + settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi), .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); // ///////////////////////////////////////////////////////////////////////// - // ATR Controller -- Slave #6 - - atr_controller16 atr_controller16 - (.clk_i(wb_clk), .rst_i(wb_rst), - .adr_i(s6_adr[5:0]), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), - .we_i(s6_we), .stb_i(s6_stb), .cyc_i(s6_cyc), .ack_o(s6_ack), - .run_rx(run_rx0 | run_rx1), .run_tx(run_tx), .ctrl_lines(atr_lines)); - - // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 + //compatibility number -> increment when the fpga has been sufficiently altered + localparam compat_num = {16'd8, 16'd0}; //major, minor + wire [31:0] reg_test32; setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32 @@ -440,7 +406,7 @@ module u1plus_core .word00(vita_time[63:32]), .word01(vita_time[31:0]), .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), .word04(reg_test32), .word05(32'b0), - .word06(32'b0), .word07(32'b0), + .word06(compat_num), .word07(gpio_readback), .word08(32'b0), .word09(32'b0), .word10(32'b0), .word11(32'b0), .word12(32'b0), .word13(32'b0), @@ -460,7 +426,5 @@ module u1plus_core assign debug_clk = 2'b00; // { gpif_clk, clk_fpga }; assign debug = 0; - assign debug_gpio_0 = 0; - assign debug_gpio_1 = 0; endmodule // u1plus_core diff --git a/fpga/usrp2/top/E1x0/Makefile b/fpga/usrp2/top/E1x0/Makefile new file mode 100644 index 000000000..0ca8ed2dd --- /dev/null +++ b/fpga/usrp2/top/E1x0/Makefile @@ -0,0 +1,17 @@ +# +# Copyright 2011 Ettus Research LLC +# + +all: E100 E110 + find -name "*.twr" | xargs grep constraint | grep met + +clean: + rm -rf build* + +E100: + make -f Makefile.$@ bin + +E110: + make -f Makefile.$@ bin + +.PHONY: all clean diff --git a/fpga/usrp2/top/E1x0/u1e_core.v b/fpga/usrp2/top/E1x0/u1e_core.v index adc3c5aab..496a7ef4c 100644 --- a/fpga/usrp2/top/E1x0/u1e_core.v +++ b/fpga/usrp2/top/E1x0/u1e_core.v @@ -60,14 +60,14 @@ module u1e_core localparam SR_CLEAR_TX_FIFO = 62; // 1 reg localparam SR_GLOBAL_RESET = 63; // 1 reg - wire [7:0] COMPAT_NUM = 8'd6; + localparam SR_GPIO = 128; // 5 regs wire wb_clk = clk_fpga; wire wb_rst, global_reset; wire pps_int; wire [63:0] vita_time, vita_time_pps; - reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + reg [15:0] reg_cgen_ctrl, reg_test, xfer_rate; wire [7:0] test_rate; wire [3:0] test_ctrl; @@ -167,7 +167,7 @@ module u1e_core .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain0 + vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain0 (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .overrun(rx_overrun_dsp0), @@ -190,7 +190,7 @@ module u1e_core .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .debug() ); - vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain1 + vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0)) vita_rx_chain1 (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .vita_time(vita_time), .overrun(rx_overrun_dsp1), @@ -253,14 +253,20 @@ module u1e_core wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), - .s0_addr(4'h0), .s0_mask(4'hF), .s1_addr(4'h1), .s1_mask(4'hF), - .s2_addr(4'h2), .s2_mask(4'hF), .s3_addr(4'h3), .s3_mask(4'hF), - .s4_addr(4'h4), .s4_mask(4'hF), .s5_addr(4'h5), .s5_mask(4'hF), - .s6_addr(4'h6), .s6_mask(4'hF), .s7_addr(4'h7), .s7_mask(4'hF), - .s8_addr(4'h8), .s8_mask(4'hE), .s9_addr(4'hf), .s9_mask(4'hF), // slave 8 is double wide - .sa_addr(4'ha), .sa_mask(4'hF), .sb_addr(4'hb), .sb_mask(4'hF), - .sc_addr(4'hc), .sc_mask(4'hF), .sd_addr(4'hd), .sd_mask(4'hF), - .se_addr(4'he), .se_mask(4'hF), .sf_addr(4'hf), .sf_mask(4'hF)) + .s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs + .s1_addr(4'h1), .s1_mask(4'hF), // Unused + .s2_addr(4'h2), .s2_mask(4'hF), // SPI + .s3_addr(4'h3), .s3_mask(4'hF), // I2C + .s4_addr(4'h4), .s4_mask(4'hF), // Unused + .s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0 + .s6_addr(4'h6), .s6_mask(4'hF), // Unused + .s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX + .s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide + // slaves 9-f alias to slave 1, all are unused + .s9_addr(4'h1), .s9_mask(4'hF), + .sa_addr(4'h1), .sa_mask(4'hF), .sb_addr(4'h1), .sb_mask(4'hF), + .sc_addr(4'h1), .sc_mask(4'hF), .sd_addr(4'h1), .sd_mask(4'hF), + .se_addr(4'h1), .se_mask(4'hF), .sf_addr(4'h1), .sf_mask(4'hF)) wb_1master (.clk_i(wb_clk),.rst_i(wb_rst), .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), @@ -298,23 +304,21 @@ module u1e_core .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); + assign s1_ack = 0; assign s4_ack = 0; assign s6_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; // ///////////////////////////////////////////////////////////////////////////////////// // Slave 0, Misc LEDs, Switches, controls - localparam REG_LEDS = 7'd0; // out localparam REG_CGEN_CTRL = 7'd4; // out localparam REG_CGEN_ST = 7'd6; // in localparam REG_TEST = 7'd8; // out localparam REG_XFER_RATE = 7'd14; // out - localparam REG_COMPAT = 7'd16; // in always @(posedge wb_clk) if(wb_rst) begin - reg_leds <= 0; reg_cgen_ctrl <= 2'b11; reg_test <= 0; xfer_rate <= 0; @@ -322,8 +326,6 @@ module u1e_core else if(s0_cyc & s0_stb & s0_we) case(s0_adr[6:0]) - REG_LEDS : - reg_leds <= s0_dat_mosi; REG_CGEN_CTRL : reg_cgen_ctrl <= s0_dat_mosi; REG_TEST : @@ -338,27 +340,14 @@ module u1e_core assign { debug_led[3:0] } = ~{1'b1, run_tx, run_rx0 | run_rx1, cgen_st_ld}; assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; - assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : - (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : + assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : (s0_adr[6:0] == REG_TEST) ? reg_test : - (s0_adr[6:0] == REG_COMPAT) ? { 8'd0, COMPAT_NUM } : 16'hBEEF; assign s0_ack = s0_stb & s0_cyc; // ///////////////////////////////////////////////////////////////////////////////////// - // Slave 1, UART - // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock - - simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart - (.clk_i(wb_clk),.rst_i(wb_rst), - .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), - .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), - .rx_int_o(),.tx_int_o(), - .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); - - // ///////////////////////////////////////////////////////////////////////////////////// // Slave 2, SPI spi_top16 shared_spi @@ -386,17 +375,15 @@ module u1e_core IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); // ///////////////////////////////////////////////////////////////////////// - // GPIOs -- Slave #4 + // GPIOs - wire [31:0] atr_lines; - wire [31:0] debug_gpio_0, debug_gpio_1; + wire [31:0] gpio_readback; - nsgpio16LE - nsgpio16LE(.clk_i(wb_clk),.rst_i(wb_rst), - .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we), - .dat_i(s4_dat_mosi),.dat_o(s4_dat_miso),.ack_o(s4_ack), - .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1), - .gpio( {io_tx,io_rx} ) ); + gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) + gpio_atr(.clk(wb_clk),.reset(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .rx(run_rx0 | run_rx1), .tx(run_tx), + .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); //////////////////////////////////////////////////////////////////////////// // FIFO to WB slave for async messages - Slave #5 @@ -440,23 +427,17 @@ module u1e_core // Settings Bus -- Slave #8 + 9 // only have 64 regs, 32 bits each with current setup... - settings_bus_16LE #(.AWIDTH(11),.RWIDTH(6)) settings_bus_16LE + settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi), .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), .strobe(set_stb),.addr(set_addr),.data(set_data) ); // ///////////////////////////////////////////////////////////////////////// - // ATR Controller -- Slave #6 - - atr_controller16 atr_controller16 - (.clk_i(wb_clk), .rst_i(wb_rst), - .adr_i(s6_adr[5:0]), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), - .we_i(s6_we), .stb_i(s6_stb), .cyc_i(s6_cyc), .ack_o(s6_ack), - .run_rx(run_rx0 | run_rx1), .run_tx(run_tx), .ctrl_lines(atr_lines)); - - // ///////////////////////////////////////////////////////////////////////// // Readback mux 32 -- Slave #7 + //compatibility number -> increment when the fpga has been sufficiently altered + localparam compat_num = {16'd8, 16'd0}; //major, minor + wire [31:0] reg_test32; //this setting reg is persistent across resets, to check for fpga loaded @@ -471,7 +452,7 @@ module u1e_core .word00(vita_time[63:32]), .word01(vita_time[31:0]), .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), .word04(reg_test32), .word05(err_status), - .word06(32'b0), .word07(32'b0), + .word06(compat_num), .word07(gpio_readback), .word08(32'b0), .word09(32'b0), .word10(32'b0), .word11(32'b0), .word12(32'b0), .word13(32'b0), @@ -491,7 +472,5 @@ module u1e_core assign debug_clk = 2'b00; //{ EM_CLK, clk_fpga }; assign debug = 0; - assign debug_gpio_0 = 0; - assign debug_gpio_1 = 0; endmodule // u1e_core diff --git a/fpga/usrp2/top/N2x0/u2plus_core.v b/fpga/usrp2/top/N2x0/u2plus_core.v index 4d612bfab..dd3d33b37 100644 --- a/fpga/usrp2/top/N2x0/u2plus_core.v +++ b/fpga/usrp2/top/N2x0/u2plus_core.v @@ -129,7 +129,7 @@ module u2plus_core // External RAM input [35:0] RAM_D_pi, output [35:0] RAM_D_po, - output RAM_D_poe, + output RAM_D_poe, output [20:0] RAM_A, output RAM_CE1n, output RAM_CENn, @@ -163,6 +163,7 @@ module u2plus_core localparam SR_TX_CTRL = 144; // 6 localparam SR_TX_DSP = 160; // 5 + localparam SR_GPIO = 184; // 5 localparam SR_UDP_SM = 192; // 64 // FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048 @@ -227,14 +228,14 @@ module u2plus_core .s1_addr(8'b0100_0000),.s1_mask(8'b1111_0000), // Packet Router (16-20K) .s2_addr(8'b0101_0000),.s2_mask(8'b1111_1100), // SPI .s3_addr(8'b0101_0100),.s3_mask(8'b1111_1100), // I2C - .s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // GPIO + .s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // Unused .s5_addr(8'b0101_1100),.s5_mask(8'b1111_1100), // Readback .s6_addr(8'b0110_0000),.s6_mask(8'b1111_0000), // Ethernet MAC - .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // 20K-24K, Settings Bus (only uses 1K) + .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // Settings Bus (only uses 1K) .s8_addr(8'b1000_0000),.s8_mask(8'b1111_1100), // PIC .s9_addr(8'b1000_0100),.s9_mask(8'b1111_1100), // Unused .sa_addr(8'b1000_1000),.sa_mask(8'b1111_1100), // UART - .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // ATR + .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // Unused .sc_addr(8'b1001_0000),.sc_mask(8'b1111_0000), // Unused .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // ICAP .se_addr(8'b1011_0000),.se_mask(8'b1111_0000), // SPI Flash @@ -275,7 +276,11 @@ module u2plus_core .se_dat_i(se_dat_i),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), .sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0)); - + + // Unused Slaves 9, b, c + assign s4_ack = 0; + assign s9_ack = 0; assign sb_ack = 0; assign sc_ack = 0; + // //////////////////////////////////////////////////////////////////////////////////////// // Reset Controller @@ -416,18 +421,21 @@ module u2plus_core assign s3_dat_i[31:8] = 24'd0; // ///////////////////////////////////////////////////////////////////////// - // GPIOs -- Slave #4 + // GPIOs - nsgpio nsgpio(.clk_i(wb_clk),.rst_i(wb_rst), - .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[4:0]),.we_i(s4_we), - .dat_i(s4_dat_o),.dat_o(s4_dat_i),.ack_o(s4_ack), - .rx(run_rx0_d1 | rx_rx1_d1), .tx(run_tx), .gpio({io_tx,io_rx}) ); + wire [31:0] gpio_readback; + + gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) + gpio_atr(.clk(dsp_clk),.reset(dsp_rst), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .rx(run_rx0_d1 | run_rx1_d1), .tx(run_tx), + .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); // ///////////////////////////////////////////////////////////////////////// // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd7, 16'd3}; //major, minor + localparam compat_num = {16'd8, 16'd0}; //major, minor wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), @@ -435,8 +443,8 @@ module u2plus_core .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), - .word08(status),.word09(32'b0),.word10(vita_time[63:32]), - .word11(vita_time[31:0]),.word12(compat_num),.word13(irq), + .word08(status),.word09(gpio_readback),.word10(vita_time[63:32]), + .word11(vita_time[31:0]),.word12(compat_num),.word13({18'b0, button, 13'b0}), .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]) ); @@ -480,16 +488,20 @@ module u2plus_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), - .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phy_reset),.changed()); - setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bld (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(bldr_done),.changed()); + setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk + (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr),.in(set_data),.out(clock_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(serdes_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(adc_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(phy_reset),.changed()); + + setting_reg #(.my_addr(SR_MISC+5),.width(1)) sr_bld + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),.in(set_data),.out(bldr_done),.changed()); // ///////////////////////////////////////////////////////////////////////// // LEDS @@ -500,48 +512,27 @@ module u2plus_core wire [7:0] led_src, led_sw; wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up & good_sync, 1'b0}; - setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(led_sw),.changed()); + setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(led_sw),.changed()); - setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) - sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); + setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) sr_led_src + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), .in(set_data_dsp),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); // ///////////////////////////////////////////////////////////////////////// // Interrupt Controller, Slave #8 - // Pass interrupts on dsp_clk to wb_clk. These need edge triggering in the pic - wire underrun_wb, overrun_wb, pps_wb; - - oneshot_2clk underrun_1s (.clk_in(dsp_clk), .in(underrun), .clk_out(wb_clk), .out(underrun_wb)); - oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun0 | overrun1), .clk_out(wb_clk), .out(overrun_wb)); - oneshot_2clk pps_1s (.clk_in(dsp_clk), .in(pps_int), .clk_out(wb_clk), .out(pps_wb)); - assign irq= {{8'b0}, {uart_tx_int[3:0], uart_rx_int[3:0]}, - {2'b0, button, periodic_int, clk_status, serdes_link_up, 2'b00}, - {pps_wb,overrun_wb,underrun_wb,PHY_INTn,i2c_int,spi_int,onetime_int,buffer_int}}; + {4'b0, clk_status, 3'b0}, + {3'b0, PHY_INTn,i2c_int,spi_int,2'b00}}; pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[4:2]), .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int), .irq(irq) ); // ///////////////////////////////////////////////////////////////////////// - // Master Timer, Slave #9 - - // No longer used, replaced with simple_timer below - assign s9_ack = 0; - - // ///////////////////////////////////////////////////////////////////////// - // Simple Timer interrupts - /* - simple_timer #(.BASE(SR_SIMTIMER)) simple_timer - (.clk(wb_clk), .reset(wb_rst), - .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .onetime_int(onetime_int), .periodic_int(periodic_int)); - */ - // ///////////////////////////////////////////////////////////////////////// // UART, Slave #10 quad_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries @@ -550,24 +541,6 @@ module u2plus_core .adr_i(sa_adr[6:2]),.dat_i(sa_dat_o),.dat_o(sa_dat_i), .rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int), .tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o)); - - // ///////////////////////////////////////////////////////////////////////// - // ATR Controller, Slave #11 - - /* - atr_controller atr_controller - (.clk_i(wb_clk),.rst_i(wb_rst), - .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i), - .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack), - .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); - */ - - // ////////////////////////////////////////////////////////////////////////// - // Time Sync, Slave #12 - - // No longer used, see time_64bit. Still need to handle mimo time, though - assign sc_ack = 0; - // ///////////////////////////////////////////////////////////////////////// // ICAP for reprogramming the FPGA, Slave #13 (D) @@ -660,8 +633,8 @@ module u2plus_core wire clear_tx; setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), + .in(set_data_dsp),.out(),.changed(clear_tx)); assign RAM_A[20:18] = 3'b0; diff --git a/fpga/usrp2/top/USRP2/u2_core.v b/fpga/usrp2/top/USRP2/u2_core.v index 7415f68e5..d3524c304 100644 --- a/fpga/usrp2/top/USRP2/u2_core.v +++ b/fpga/usrp2/top/USRP2/u2_core.v @@ -136,7 +136,7 @@ module u2_core // External RAM input [17:0] RAM_D_pi, - output [17:0] RAM_D_po, + output [17:0] RAM_D_po, output RAM_D_poe, output [18:0] RAM_A, output RAM_CE1n, @@ -168,6 +168,7 @@ module u2_core localparam SR_TX_CTRL = 144; // 6 localparam SR_TX_DSP = 160; // 5 + localparam SR_GPIO = 184; // 5 localparam SR_UDP_SM = 192; // 64 // FIFO Sizes, 9 = 512 lines, 10 = 1024, 11 = 2048 @@ -233,16 +234,16 @@ module u2_core .s1_addr(8'b0100_0000),.s1_mask(8'b1111_0000), // Packet Router (16-20K) .s2_addr(8'b0101_0000),.s2_mask(8'b1111_1100), // SPI .s3_addr(8'b0101_0100),.s3_mask(8'b1111_1100), // I2C - .s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // GPIO + .s4_addr(8'b0101_1000),.s4_mask(8'b1111_1100), // Unused .s5_addr(8'b0101_1100),.s5_mask(8'b1111_1100), // Readback .s6_addr(8'b0110_0000),.s6_mask(8'b1111_0000), // Ethernet MAC - .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // 20K-24K, Settings Bus (only uses 1K) + .s7_addr(8'b0111_0000),.s7_mask(8'b1111_0000), // Settings Bus (only uses 1K) .s8_addr(8'b1000_0000),.s8_mask(8'b1111_1100), // PIC .s9_addr(8'b1000_0100),.s9_mask(8'b1111_1100), // Unused .sa_addr(8'b1000_1000),.sa_mask(8'b1111_1100), // UART - .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // ATR + .sb_addr(8'b1000_1100),.sb_mask(8'b1111_1100), // Unused .sc_addr(8'b1001_0000),.sc_mask(8'b1111_0000), // Unused - .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // SD Card access + .sd_addr(8'b1010_0000),.sd_mask(8'b1111_0000), // Unused .se_addr(8'b1011_0000),.se_mask(8'b1111_0000), // Unused .sf_addr(8'b1100_0000),.sf_mask(8'b1100_0000), // Unused .dw(dw),.aw(aw),.sw(sw)) wb_1master @@ -281,7 +282,12 @@ module u2_core .se_dat_i(se_dat_i),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), .sf_dat_o(sf_dat_o),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), .sf_dat_i(sf_dat_i),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0)); - + + // Unused Slaves 4, 9 and b-f + assign s4_ack = 0; + assign s9_ack = 0; assign sb_ack = 0; assign sc_ack = 0; + assign sd_ack = 0; assign se_ack = 0; assign fc_ack = 0; + // //////////////////////////////////////////////////////////////////////////////////////// // Reset Controller system_control sysctrl (.wb_clk_i(wb_clk), // .por_i(por), @@ -421,18 +427,21 @@ module u2_core assign s3_dat_i[31:8] = 24'd0; // ///////////////////////////////////////////////////////////////////////// - // GPIOs -- Slave #4 + // GPIOs - nsgpio nsgpio(.clk_i(wb_clk),.rst_i(wb_rst), - .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[4:0]),.we_i(s4_we), - .dat_i(s4_dat_o),.dat_o(s4_dat_i),.ack_o(s4_ack), - .rx(run_rx0_d1 | rx_rx1_d1), .tx(run_tx), .gpio({io_tx,io_rx}) ); + wire [31:0] gpio_readback; + + gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) + gpio_atr(.clk(dsp_clk),.reset(dsp_rst), + .set_stb(set_stb_dsp),.set_addr(set_addr_dsp),.set_data(set_data_dsp), + .rx(run_rx0_d1 | run_rx1_d1), .tx(run_tx), + .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) ); // ///////////////////////////////////////////////////////////////////////// // Buffer Pool Status -- Slave #5 //compatibility number -> increment when the fpga has been sufficiently altered - localparam compat_num = {16'd7, 16'd3}; //major, minor + localparam compat_num = {16'd8, 16'd0}; //major, minor wb_readback_mux buff_pool_status (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s5_stb), @@ -440,8 +449,8 @@ module u2_core .word00(32'b0),.word01(32'b0),.word02(32'b0),.word03(32'b0), .word04(32'b0),.word05(32'b0),.word06(32'b0),.word07(32'b0), - .word08(status),.word09(32'b0),.word10(vita_time[63:32]), - .word11(vita_time[31:0]),.word12(compat_num),.word13(irq), + .word08(status),.word09(gpio_readback),.word10(vita_time[63:32]), + .word11(vita_time[31:0]),.word12(compat_num),.word13(32'b0), .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]) ); @@ -485,14 +494,17 @@ module u2_core wire phy_reset; assign PHY_RESETn = ~phy_reset; - setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr), - .in(set_data),.out(clock_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(serdes_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(adc_outs),.changed()); - setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(phy_reset),.changed()); + setting_reg #(.my_addr(SR_MISC+0),.width(8)) sr_clk + (.clk(wb_clk),.rst(wb_rst),.strobe(s7_ack),.addr(set_addr),.in(set_data),.out(clock_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+1),.width(8)) sr_ser + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(serdes_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+2),.width(8)) sr_adc + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(adc_outs),.changed()); + + setting_reg #(.my_addr(SR_MISC+4),.width(1)) sr_phy + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(phy_reset),.changed()); // ///////////////////////////////////////////////////////////////////////// // LEDS @@ -503,48 +515,27 @@ module u2_core wire [7:0] led_src, led_sw; wire [7:0] led_hw = {run_tx, (run_rx0_d1 | run_rx1_d1), clk_status, serdes_link_up & good_sync, 1'b0}; - setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(led_sw),.changed()); + setting_reg #(.my_addr(SR_MISC+3),.width(8)) sr_led + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp),.in(set_data_dsp),.out(led_sw),.changed()); - setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) - sr_led_src (.clk(wb_clk),.rst(wb_rst), .strobe(set_stb),.addr(set_addr), .in(set_data),.out(led_src),.changed()); + setting_reg #(.my_addr(SR_MISC+6),.width(8), .at_reset(8'b0001_1110)) sr_led_src + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), .in(set_data_dsp),.out(led_src),.changed()); assign leds = (led_src & led_hw) | (~led_src & led_sw); // ///////////////////////////////////////////////////////////////////////// // Interrupt Controller, Slave #8 - // Pass interrupts on dsp_clk to wb_clk. These need edge triggering in the pic - wire underrun_wb, overrun_wb, pps_wb; - - oneshot_2clk underrun_1s (.clk_in(dsp_clk), .in(underrun), .clk_out(wb_clk), .out(underrun_wb)); - oneshot_2clk overrun_1s (.clk_in(dsp_clk), .in(overrun0 | overrun1), .clk_out(wb_clk), .out(overrun_wb)); - oneshot_2clk pps_1s (.clk_in(dsp_clk), .in(pps_int), .clk_out(wb_clk), .out(pps_wb)); - assign irq= {{8'b0}, - {8'b0}, - {2'b0, good_sync, periodic_int, clk_status, serdes_link_up, uart_tx_int, uart_rx_int}, - {pps_wb,overrun_wb,underrun_wb,PHY_INTn,i2c_int,spi_int,onetime_int,buffer_int}}; + {3'b0, uart_tx_int, 2'b0, uart_rx_int}, + {4'b0, clk_status, 3'b0}, + {3'b0, PHY_INTn,i2c_int,spi_int,2'b00}}; pic pic(.clk_i(wb_clk),.rst_i(wb_rst),.cyc_i(s8_cyc),.stb_i(s8_stb),.adr_i(s8_adr[4:2]), .we_i(s8_we),.dat_i(s8_dat_o),.dat_o(s8_dat_i),.ack_o(s8_ack),.int_o(proc_int), .irq(irq) ); // ///////////////////////////////////////////////////////////////////////// - // Master Timer, Slave #9 - - // No longer used, replaced with simple_timer below - assign s9_ack = 0; - - // ///////////////////////////////////////////////////////////////////////// - // Simple Timer interrupts - /* - simple_timer #(.BASE(SR_SIMTIMER)) simple_timer - (.clk(wb_clk), .reset(wb_rst), - .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), - .onetime_int(onetime_int), .periodic_int(periodic_int)); - */ - // ///////////////////////////////////////////////////////////////////////// // UART, Slave #10 simple_uart #(.TXDEPTH(3),.RXDEPTH(3)) uart // depth of 3 is 128 entries @@ -553,36 +544,7 @@ module u2_core .adr_i(sa_adr[4:2]),.dat_i(sa_dat_o),.dat_o(sa_dat_i), .rx_int_o(uart_rx_int),.tx_int_o(uart_tx_int), .tx_o(uart_tx_o),.rx_i(uart_rx_i),.baud_o(uart_baud_o)); - - // ///////////////////////////////////////////////////////////////////////// - // ATR Controller, Slave #11 - /* - atr_controller atr_controller - (.clk_i(wb_clk),.rst_i(wb_rst), - .adr_i(sb_adr[5:0]),.sel_i(sb_sel),.dat_i(sb_dat_o),.dat_o(sb_dat_i), - .we_i(sb_we),.stb_i(sb_stb),.cyc_i(sb_cyc),.ack_o(sb_ack), - .run_rx(run_rx0_d1 | run_rx1_d1),.run_tx(run_tx),.ctrl_lines(atr_lines) ); - */ - - // ////////////////////////////////////////////////////////////////////////// - // Time Sync, Slave #12 - - // No longer used, see time_64bit. Still need to handle mimo time, though - assign sc_ack = 0; - - // ///////////////////////////////////////////////////////////////////////// - // SD Card Reader / Writer, Slave #13 - /* - sd_spi_wb sd_spi_wb - (.clk(wb_clk),.rst(wb_rst), - .sd_clk(sd_clk),.sd_csn(sd_csn),.sd_mosi(sd_mosi),.sd_miso(sd_miso), - .wb_cyc_i(sd_cyc),.wb_stb_i(sd_stb),.wb_we_i(sd_we), - .wb_adr_i(sd_adr[3:2]),.wb_dat_i(sd_dat_o[7:0]),.wb_dat_o(sd_dat_i[7:0]), - .wb_ack_o(sd_ack) ); - - assign sd_dat_i[31:8] = 0; - */ // ///////////////////////////////////////////////////////////////////////// // ADC Frontend wire [23:0] adc_i, adc_q; @@ -659,8 +621,8 @@ module u2_core wire clear_tx; setting_reg #(.my_addr(SR_TX_CTRL+1)) sr_clear_tx - (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), - .in(set_data),.out(),.changed(clear_tx)); + (.clk(dsp_clk),.rst(dsp_rst),.strobe(set_stb_dsp),.addr(set_addr_dsp), + .in(set_data_dsp),.out(),.changed(clear_tx)); ext_fifo #(.EXT_WIDTH(18),.INT_WIDTH(36),.RAM_DEPTH(19),.FIFO_DEPTH(19)) ext_fifo_i1 diff --git a/fpga/usrp2/vrt/vita_rx_chain.v b/fpga/usrp2/vrt/vita_rx_chain.v index 1986743b3..8b41e5fa8 100644 --- a/fpga/usrp2/vrt/vita_rx_chain.v +++ b/fpga/usrp2/vrt/vita_rx_chain.v @@ -50,11 +50,32 @@ module vita_rx_chain .data_o(rx_data_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .debug_rx(vrf_debug) ); - dsp_framer36 #(.BUF_SIZE(FIFOSIZE), - .PORT_SEL(UNIT), - .PROT_ENG_FLAGS(PROT_ENG_FLAGS)) dsp0_framer36 - (.clk(clk), .reset(reset), .clear(clear), + wire [FIFOSIZE-1:0] access_adr, access_len; + wire access_we, access_stb, access_ok, access_done, access_skip_read; + wire [35:0] dsp_to_buf, buf_to_dsp; + wire [35:0] rx_data_int2; + wire rx_src_rdy_int2, rx_dst_rdy_int2; + + double_buffer #(.BUF_SIZE(FIFOSIZE)) db + (.clk(clk),.reset(reset),.clear(clear), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(dsp_to_buf), .access_dat_o(buf_to_dsp), + .data_i(rx_data_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), + .data_o(rx_data_int2), .src_rdy_o(rx_src_rdy_int2), .dst_rdy_i(rx_dst_rdy_int2)); + + dspengine_16to8 #(.BASE(BASE+9), .BUF_SIZE(FIFOSIZE)) dspengine_16to8 + (.clk(clk),.reset(reset),.clear(clear), + .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(buf_to_dsp), .access_dat_o(dsp_to_buf)); + + add_routing_header #(.PORT_SEL(UNIT), + .PROT_ENG_FLAGS(PROT_ENG_FLAGS)) dsp_routing_header + (.clk(clk), .reset(reset), .clear(clear), + .data_i(rx_data_int2), .src_rdy_i(rx_src_rdy_int2), .dst_rdy_o(rx_dst_rdy_int2), .data_o(rx_data_o), .src_rdy_o(rx_src_rdy_o), .dst_rdy_i(rx_dst_rdy_i) ); assign debug = vrc_debug; // | vrf_debug; |