aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp3/lib
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp3/lib')
-rw-r--r--fpga/usrp3/lib/packet_proc/Makefile.srcs2
-rw-r--r--fpga/usrp3/lib/packet_proc/axis_packet_debug.v71
-rw-r--r--fpga/usrp3/lib/packet_proc/cvita_packet_debug.v108
-rw-r--r--fpga/usrp3/lib/packet_proc/eth_dispatch.v266
-rw-r--r--fpga/usrp3/lib/packet_proc/eth_interface.v90
-rw-r--r--fpga/usrp3/lib/xge_interface/xge_mac_wrapper.v6
6 files changed, 322 insertions, 221 deletions
diff --git a/fpga/usrp3/lib/packet_proc/Makefile.srcs b/fpga/usrp3/lib/packet_proc/Makefile.srcs
index 078609514..c4bf877a0 100644
--- a/fpga/usrp3/lib/packet_proc/Makefile.srcs
+++ b/fpga/usrp3/lib/packet_proc/Makefile.srcs
@@ -18,4 +18,6 @@ cvita_insert_tlast.v \
cvita_dest_lookup.v \
cvita_chunker.v \
cvita_dechunker.v \
+axis_packet_debug.v \
+cvita_packet_debug.v \
))
diff --git a/fpga/usrp3/lib/packet_proc/axis_packet_debug.v b/fpga/usrp3/lib/packet_proc/axis_packet_debug.v
new file mode 100644
index 000000000..7d968e7b1
--- /dev/null
+++ b/fpga/usrp3/lib/packet_proc/axis_packet_debug.v
@@ -0,0 +1,71 @@
+//
+// Copyright 2014 Ettus Research LLC
+//
+
+module axis_packet_debug (
+ input clk,
+ input reset,
+ input clear,
+
+ //Packet In
+ input [63:0] tdata,
+ input tlast,
+ input tvalid,
+ input tready,
+
+ //Per packet info
+ output reg pkt_strobe,
+ output reg [15:0] length,
+ output reg [63:0] checksum,
+
+ //Statistics
+ output reg [31:0] pkt_count
+);
+
+ localparam ST_HEADER = 1'b0;
+ localparam ST_DATA = 1'b1;
+
+ //Packet state logic
+ reg pkt_state;
+ always @(posedge clk) begin
+ if (reset) begin
+ pkt_state <= ST_HEADER;
+ end else if (tvalid & tready) begin
+ pkt_state <= tlast ? ST_HEADER : ST_DATA;
+ end
+ end
+
+ //Trigger logic
+ always @(posedge clk)
+ if (reset)
+ pkt_strobe <= 1'b0;
+ else
+ pkt_strobe <= tvalid & tready & tlast;
+
+ //Length capture
+ always @(posedge clk)
+ if (reset || pkt_state == ST_HEADER)
+ length <= tlast ? 16'd8 : 16'd0;
+ else
+ if (tvalid & tready)
+ length <= length + 16'd8;
+
+ //Checksum capture
+ always @(posedge clk)
+ if (reset || pkt_state == ST_HEADER)
+ checksum <= 64'd0;
+ else
+ if (tvalid & tready)
+ checksum <= checksum ^ tdata;
+
+ //Counts
+ always @(posedge clk)
+ if (reset | clear) begin
+ pkt_count <= 32'd0;
+ end else begin
+ if (tvalid & tready & tlast) begin
+ pkt_count <= pkt_count + 32'd1;
+ end
+ end
+
+endmodule // cvita_packet_debug
diff --git a/fpga/usrp3/lib/packet_proc/cvita_packet_debug.v b/fpga/usrp3/lib/packet_proc/cvita_packet_debug.v
new file mode 100644
index 000000000..68e32efe4
--- /dev/null
+++ b/fpga/usrp3/lib/packet_proc/cvita_packet_debug.v
@@ -0,0 +1,108 @@
+//
+// Copyright 2014 Ettus Research LLC
+//
+
+module cvita_packet_debug (
+ input clk,
+ input reset,
+ input clear,
+
+ //Packet In
+ input [63:0] tdata,
+ input tlast,
+ input tvalid,
+ input tready,
+
+ //Per packet info
+ output reg pkt_strobe,
+ output reg [63:0] header,
+ output reg [63:0] timestamp,
+ output reg [15:0] actual_length,
+ output reg [63:0] checksum,
+
+ //Statistics
+ output reg [31:0] pkt_count,
+ output reg [31:0] ctrl_pkt_count
+);
+
+ localparam ST_HEADER = 2'd0;
+ localparam ST_TIME = 2'd1;
+ localparam ST_DATA = 2'd2;
+
+ //Packet state logic
+ reg [1:0] pkt_state;
+ always @(posedge clk) begin
+ if (reset) begin
+ pkt_state <= ST_HEADER;
+ end else if (tvalid & tready) begin
+ case(pkt_state)
+ ST_HEADER: begin
+ if (!tlast)
+ pkt_state <= (tdata[61]) ? ST_TIME : ST_DATA;
+ end
+ ST_TIME: begin
+ pkt_state <= (tlast) ? ST_HEADER : ST_DATA;
+ end
+ ST_DATA: begin
+ pkt_state <= (tlast) ? ST_HEADER : ST_DATA;
+ end
+ default: pkt_state <= ST_HEADER;
+ endcase
+ end
+ end
+
+ //Trigger logic
+ always @(posedge clk)
+ if (reset)
+ pkt_strobe <= 1'b0;
+ else
+ pkt_strobe <= tvalid & tready & tlast;
+
+ //Header capture
+ always @(posedge clk)
+ if (reset)
+ header <= 64'd0;
+ else if (pkt_state == ST_HEADER)
+ if (tvalid & tready)
+ header <= tdata;
+
+ //Timestamp capture
+ always @(posedge clk)
+ if (reset)
+ timestamp <= 64'd0;
+ else if (pkt_state == ST_TIME)
+ if (tvalid & tready)
+ timestamp <= tdata;
+
+ //Length capture
+ always @(posedge clk)
+ if (reset || pkt_state == ST_HEADER)
+ actual_length <= (tvalid & tready & tlast) ? 16'd8 : 16'd0;
+ else
+ if (tvalid & tready)
+ actual_length <= actual_length + 16'd8;
+
+ //Checksum capture
+ always @(posedge clk)
+ if (reset || pkt_state == ST_HEADER)
+ checksum <= 64'd0;
+ else if (pkt_state == ST_DATA)
+ if (tvalid & tready)
+ checksum <= checksum ^ tdata;
+
+ //Counts
+ always @(posedge clk)
+ if (reset | clear) begin
+ pkt_count <= 32'd0;
+ ctrl_pkt_count <= 32'd0;
+ end else begin
+ if (tvalid & tready & tlast) begin
+ pkt_count <= pkt_count + 32'd1;
+ if (pkt_state == ST_HEADER && tdata[63])
+ ctrl_pkt_count <= ctrl_pkt_count + 32'd1;
+ else if (header[63])
+ ctrl_pkt_count <= ctrl_pkt_count + 32'd1;
+ end
+ end
+
+endmodule // cvita_packet_debug
diff --git a/fpga/usrp3/lib/packet_proc/eth_dispatch.v b/fpga/usrp3/lib/packet_proc/eth_dispatch.v
index 07f40d50e..c21c0b8cb 100644
--- a/fpga/usrp3/lib/packet_proc/eth_dispatch.v
+++ b/fpga/usrp3/lib/packet_proc/eth_dispatch.v
@@ -76,138 +76,130 @@ module eth_dispatch
output [31:0] debug
);
- //
+ //---------------------------------------------------------
// State machine declarations
- //
- reg [2:0] state;
-
- localparam WAIT_PACKET = 0;
- localparam READ_HEADER = 1;
- localparam FORWARD_ZPU = 2;
- localparam FORWARD_ZPU_AND_XO = 3;
- localparam FORWARD_XO = 4;
- localparam FORWARD_RADIO_CORE = 5;
- localparam DROP_PACKET = 6;
- localparam CLASSIFY_PACKET = 7;
+ //---------------------------------------------------------
+ reg [2:0] state;
+
+ localparam WAIT_PACKET = 0;
+ localparam READ_HEADER = 1;
+ localparam FORWARD_ZPU = 2;
+ localparam FORWARD_ZPU_AND_XO = 3;
+ localparam FORWARD_XO = 4;
+ localparam FORWARD_RADIO_CORE = 5;
+ localparam DROP_PACKET = 6;
+ localparam CLASSIFY_PACKET = 7;
-
- //
// Small RAM stores packet header during parsing.
- //
// IJB consider changing HEADER_RAM_SIZE to 7
localparam HEADER_RAM_SIZE = 9;
- (*ram_style="distributed"*)
- reg [68:0] header_ram [HEADER_RAM_SIZE-1:0];
- reg [3:0] header_ram_addr;
- reg drop_this_packet;
+ (*ram_style="distributed"*) reg [68:0] header_ram [HEADER_RAM_SIZE-1:0];
- wire header_done = (header_ram_addr == HEADER_RAM_SIZE-1);
- reg fwd_input;
+ reg [3:0] header_ram_addr;
+ wire header_done = (header_ram_addr == HEADER_RAM_SIZE-1);
+ reg fwd_input;
- //
- reg [63:0] in_tdata_reg;
+ reg [63:0] in_tdata_reg;
- //
- wire out_tvalid;
- wire out_tready;
- wire out_tlast;
- wire [3:0] out_tuser;
- wire [63:0] out_tdata;
+ wire out_tvalid;
+ wire out_tready;
+ wire out_tlast;
+ wire [3:0] out_tuser;
+ wire [63:0] out_tdata;
- //
// Output AXI-Stream interface to VITA Radio Core
- wire [63:0] vita_pre_tdata;
- wire [3:0] vita_pre_tuser;
- wire vita_pre_tlast;
- wire vita_pre_tvalid;
- wire vita_pre_tready;
+ wire [63:0] vita_pre_tdata;
+ wire [3:0] vita_pre_tuser;
+ wire vita_pre_tlast;
+ wire vita_pre_tvalid;
+ wire vita_pre_tready;
// Output AXI-Stream interface to ZPU
- wire [63:0] zpu_pre_tdata;
- wire [3:0] zpu_pre_tuser;
- wire zpu_pre_tlast;
- wire zpu_pre_tvalid;
- wire zpu_pre_tready;
+ wire [63:0] zpu_pre_tdata;
+ wire [3:0] zpu_pre_tuser;
+ wire zpu_pre_tlast;
+ wire zpu_pre_tvalid;
+ wire zpu_pre_tready;
// Output AXI-Stream interface to cross-over MAC
- wire [63:0] xo_pre_tdata;
- wire [3:0] xo_pre_tuser;
- wire xo_pre_tlast;
- wire xo_pre_tvalid;
- wire xo_pre_tready;
+ wire [63:0] xo_pre_tdata;
+ wire [3:0] xo_pre_tuser;
+ wire xo_pre_tlast;
+ wire xo_pre_tvalid;
+ wire xo_pre_tready;
- //
// Packet Parse Flags
- //
- reg is_eth_dst_addr;
- reg is_eth_broadcast;
- reg is_eth_type_ipv4;
- reg is_ipv4_dst_addr;
- reg is_ipv4_proto_udp;
- reg is_ipv4_proto_icmp;
- reg [1:0] is_udp_dst_ports;
- reg is_icmp_no_fwd;
- reg is_chdr;
-
- //
+ reg is_eth_dst_addr;
+ reg is_eth_broadcast;
+ reg is_eth_type_ipv4;
+ reg is_ipv4_dst_addr;
+ reg is_ipv4_proto_udp;
+ reg is_ipv4_proto_icmp;
+ reg [1:0] is_udp_dst_ports;
+ reg is_icmp_no_fwd;
+ reg is_chdr;
+
+ //---------------------------------------------------------
// Settings regs
- //
-
- wire [47:0] my_mac;
+ //---------------------------------------------------------
+ // MAC address for the dispatcher module.
+ // This value is used to determine if the packet is meant
+ // for this device should be consumed
+ wire [47:0] my_mac;
setting_reg #(.my_addr(BASE), .awidth(16), .width(32)) sr_my_mac_lsb
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(my_mac[31:0]),.changed());
-
setting_reg #(.my_addr(BASE+1), .awidth(16), .width(16)) sr_my_mac_msb
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(my_mac[47:32]),.changed());
- wire [31:0] my_ip;
-
+ // IP address for the dispatcher module.
+ // This value is used to determine if the packet is addressed
+ // to this device
+ wire [31:0] my_ip;
setting_reg #(.my_addr(BASE+2), .awidth(16), .width(32)) sr_my_ip
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(my_ip[31:0]),.changed());
- wire [15:0] my_port0, my_port1;
-
+ // This module supports two destination ports
+ wire [15:0] my_port0, my_port1;
setting_reg #(.my_addr(BASE+3), .awidth(16), .width(32)) sr_udp_port
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out({my_port1[15:0],my_port0[15:0]}),.changed());
+ // forward_ndest: Forward to crossover path if MAC Addr in packet
+ // does not match "my_mac"
+ // forward_bcast: Forward broadcasts to crossover path
wire forward_ndest, forward_bcast;
setting_reg #(.my_addr(BASE+4), .awidth(16), .width(2)) sr_forward_ctrl
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out({forward_ndest, forward_bcast}),.changed());
+ //ICMP Type and Code to forward packet to ZPU
wire [7:0] my_icmp_type, my_icmp_code;
setting_reg #(.my_addr(BASE+5), .awidth(16), .width(16)) sr_icmp_ctrl
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out({my_icmp_type, my_icmp_code}),.changed());
- assign debug =
- {
- 1'b0, state, //4
- 1'b0, in_tvalid, in_tready, in_tlast, //4
- 1'b0, is_eth_dst_addr, is_eth_broadcast, is_eth_type_ipv4,
- is_ipv4_dst_addr, is_ipv4_proto_udp, is_udp_dst_ports, //8
- header_ram_addr[3:0], //4
- 4'b0, 8'b0
- };
-
-
- //
+ //---------------------------------------------------------
// Packet Forwarding State machine.
- //
+ //---------------------------------------------------------
+ // Read input packet and store the header into a RAM for
+ // classification. A header is defined as HEADER_RAM_SIZE
+ // number of 64-bit words.
+ // Based on clasification results, output the packet to the
+ // VITA port, crossover(XO) port or the ZPU. Note that the
+ // XO and ZPU ports require fully framed Eth packets so data
+ // from the RAM has to be replayed on the output. The state
+ // machine will hold off input packets until the header is
+ // replayed. The state machine also supports dropping pkts.
always @(posedge clk)
if (reset || clear) begin
state <= WAIT_PACKET;
header_ram_addr <= 0;
- drop_this_packet <= 0;
fwd_input <= 0;
end else begin
// Defaults.
- drop_this_packet <= 0;
-
case(state)
//
// Wait for start of a packet
@@ -250,15 +242,15 @@ module eth_dispatch
end else if (is_eth_broadcast) begin
header_ram_addr <= 0;
state <= forward_bcast? FORWARD_ZPU_AND_XO : FORWARD_ZPU;
- end else if (!is_eth_dst_addr) begin
+ end else if (!is_eth_dst_addr && forward_ndest) begin
header_ram_addr <= 0;
- state <= forward_ndest? FORWARD_XO : DROP_PACKET;
+ state <= FORWARD_XO;
+ end else if (!is_eth_dst_addr && !forward_ndest) begin
+ header_ram_addr <= HEADER_RAM_SIZE - 1;
+ state <= DROP_PACKET;
end else if ((is_udp_dst_ports != 0) && is_chdr) begin
header_ram_addr <= 6; // Jump to CHDR
state <= FORWARD_RADIO_CORE;
- end else if (drop_this_packet) begin
- header_ram_addr <= HEADER_RAM_SIZE-1;
- state <= DROP_PACKET;
end else begin
header_ram_addr <= 0;
state <= FORWARD_ZPU;
@@ -328,10 +320,14 @@ module eth_dispatch
endcase // case (state)
end // else: !if(reset || clear)
- //
+ //---------------------------------------------------------
// Classifier State machine.
// Deep packet inspection during header ingress.
- //
+ //---------------------------------------------------------
+ // As the packet header is pushed into the RAM, set classification
+ // bits so that by the time the input state machine reaches the
+ // CLASSIFY_PACKET state, the packet has been fully identified.
+
always @(posedge clk)
if (reset || clear) begin
is_eth_dst_addr <= 1'b0;
@@ -343,10 +339,6 @@ module eth_dispatch
is_udp_dst_ports <= 0;
is_icmp_no_fwd <= 0;
is_chdr <= 1'b0;
-
- //space_in_fifo <= 0;
- //is_there_fifo_space <= 1;
- //packet_length <= 0;
end else if (in_tvalid && in_tready) begin // if (reset || clear)
in_tdata_reg <= in_tdata;
@@ -426,9 +418,9 @@ module eth_dispatch
end // if (in_tvalid && in_tready)
- //
+ //---------------------------------------------------------
// Output (Egress) Interface muxing
- //
+ //---------------------------------------------------------
assign out_tready =
(state == DROP_PACKET) ||
((state == FORWARD_RADIO_CORE) && vita_pre_tready) ||
@@ -448,7 +440,6 @@ module eth_dispatch
(state == READ_HEADER) ||
(out_tready && fwd_input);
-
//
// Because we can forward to both the ZPU and XO FIFO's concurrently
// we have to make sure both can accept data in the same cycle.
@@ -461,25 +452,22 @@ module eth_dispatch
assign zpu_pre_tvalid = out_tvalid &&
((state == FORWARD_ZPU) ||
((state == FORWARD_ZPU_AND_XO) && xo_pre_tready));
- assign vita_pre_tvalid = out_tvalid && (state == FORWARD_RADIO_CORE);
-
- assign {zpu_pre_tuser,zpu_pre_tdata} = ((state == FORWARD_ZPU_AND_XO) || (state == FORWARD_ZPU)) ?
- {out_tuser,out_tdata} : 0;
-
- assign {xo_pre_tuser,xo_pre_tdata} = ((state == FORWARD_ZPU_AND_XO) || (state == FORWARD_XO)) ?
- {out_tuser,out_tdata} : 0;
-
- assign {vita_pre_tuser,vita_pre_tdata} = (state == FORWARD_RADIO_CORE) ? {out_tuser,out_tdata} : 0;
-
- assign zpu_pre_tlast = out_tlast && ((state == FORWARD_ZPU) || (state == FORWARD_ZPU_AND_XO));
-
- assign xo_pre_tlast = out_tlast && ((state == FORWARD_XO) || (state == FORWARD_ZPU_AND_XO));
-
- assign vita_pre_tlast = out_tlast && (state == FORWARD_RADIO_CORE);
-
- //
- // Egress FIFO's (Large)
- //
+ assign vita_pre_tvalid = out_tvalid &&
+ (state == FORWARD_RADIO_CORE);
+
+ assign {zpu_pre_tlast, zpu_pre_tuser, zpu_pre_tdata} = {out_tlast, out_tuser, out_tdata};
+ assign {xo_pre_tlast, xo_pre_tuser, xo_pre_tdata} = {out_tlast, out_tuser, out_tdata};
+ assign {vita_pre_tlast, vita_pre_tuser, vita_pre_tdata} = {out_tlast, out_tuser, out_tdata};
+
+ //---------------------------------------------------------
+ // Egress FIFO's
+ //---------------------------------------------------------
+ // These FIFO's have to be fairly large to prevent any egress
+ // port from backpressuring the input state machine.
+ // The ZPU and XO ports are inherently slow consumers so they
+ // get a large buffer. The VITA port is fast but high throughput
+ // so even that needs a large FIFO.
+
axi_fifo #(.WIDTH(69),.SIZE(10))
axi_fifo_zpu (
.clk(clk),
@@ -525,52 +513,4 @@ module eth_dispatch
.occupied()
);
- assign debug_flags = {vita_pre_tready,xo_pre_tready,zpu_pre_tready};
-
-
-
-/* -----\/----- EXCLUDED -----\/-----
-
- wire vready, zready, oready;
- wire vvalid, zvalid, ovalid;
-
- reg [2:0] ed_state;
- localparam ED_IDLE = 3'd0;
- localparam ED_IN_HDR = 3'd1;
- localparam ED_VITA = 3'd2;
- localparam ED_ZPU = 3'd3;
- localparam ED_OUT = 3'd4;
- localparam ED_DROP = 3'd5;
- -----/\----- EXCLUDED -----/\----- */
-
- // for now, send everything to zpu
- /*
- always @(posedge clk)
- if(reset | clear)
- ed_state <= ED_IDLE;
- else
- case(ed_state)
- ED_IDLE:
- if(vready & zready & oready & in_tvalid)
- ;
- endcase // case (ed_state)
- */
-
-/* -----\/----- EXCLUDED -----\/-----
- axi_packet_gate #(.WIDTH(64), .SIZE(10)) vita_gate
- (.clk(clk), .reset(reset), .clear(clear),
- .i_tdata(in_tdata), .i_tlast(), .i_terror(), .i_tvalid(1'b0), .i_tready(vready),
- .o_tdata(vita_tdata), .o_tlast(vita_tlast), .o_tvalid(vita_tvalid), .o_tready(vita_tready));
-
- axi_packet_gate #(.WIDTH(68), .SIZE(10)) zpu_gate
- (.clk(clk), .reset(reset), .clear(clear),
- .i_tdata({in_tuser,in_tdata}), .i_tlast(in_tlast), .i_terror(in_tuser[3]), .i_tvalid(in_tvalid), .i_tready(in_tready),
- .o_tdata({zpu_tuser,zpu_tdata}), .o_tlast(zpu_tlast), .o_tvalid(zpu_tvalid), .o_tready(zpu_tready));
-
- axi_packet_gate #(.WIDTH(68), .SIZE(10)) out_gate
- (.clk(clk), .reset(reset), .clear(clear),
- .i_tdata({in_tuser,in_tdata}), .i_tlast(), .i_terror(), .i_tvalid(1'b0), .i_tready(oready),
- .o_tdata({out_tuser,out_tdata}), .o_tlast(out_tlast), .o_tvalid(out_tvalid), .o_tready(out_tready));
- -----/\----- EXCLUDED -----/\----- */
-
endmodule // eth_dispatch
diff --git a/fpga/usrp3/lib/packet_proc/eth_interface.v b/fpga/usrp3/lib/packet_proc/eth_interface.v
index e6fa3252d..1885a4825 100644
--- a/fpga/usrp3/lib/packet_proc/eth_interface.v
+++ b/fpga/usrp3/lib/packet_proc/eth_interface.v
@@ -26,24 +26,27 @@ module eth_interface
output [31:0] debug
);
- wire [63:0] v2ef_tdata;
- wire [3:0] v2ef_tuser;
- wire v2ef_tlast, v2ef_tvalid, v2ef_tready;
+ wire [63:0] v2ef_tdata;
+ wire [3:0] v2ef_tuser;
+ wire v2ef_tlast, v2ef_tvalid, v2ef_tready;
// //////////////////////////////////////////////////////////////
// Incoming Ethernet path
// Includes FIFO on the output going to ZPU
- wire [63:0] epg_tdata_int;
- wire [3:0] epg_tuser_int;
- wire epg_tlast_int, epg_tvalid_int, epg_tready_int;
-
+ wire [63:0] epg_tdata_int;
+ wire [3:0] epg_tuser_int;
+ wire epg_tlast_int, epg_tvalid_int, epg_tready_int;
+
//
// Packet gate ensures on entire ingressing packet is buffered before feeding it downstream so that it bursts
// efficiently internally without holding resources allocted for longer than optimal. This also means that an upstream
// error discovered in the packet can allow the packet to be destroyed here, before it gets deeper into the USRP.
//
- axi_packet_gate #(.WIDTH(68), .SIZE(10)) packet_gater //holds 8K pkts
+ // This gate must be able to hold at least 9900 bytes which is the maximum length between the SOF and EOF
+ // as asserted by the 1G and 10G MACs. This is required in case one of the max size packets has an error
+ // and needs to be dropped. With SIZE=11, this gate will hold 2 8k packets.
+ axi_packet_gate #(.WIDTH(68), .SIZE(11)) packet_gater
(.clk(clk), .reset(reset), .clear(clear),
.i_tdata({eth_rx_tuser, eth_rx_tdata}), .i_tlast(eth_rx_tlast),
@@ -56,20 +59,30 @@ module eth_interface
//
// Based on programmed rules, parse network headers and decide which internal destination(s) this packet will be forwarded to.
//
- wire [63:0] e2z_tdata_int;
- wire [3:0] e2z_tuser_int;
- wire e2z_tlast_int, e2z_tvalid_int, e2z_tready_int;
- wire [2:0] dispatch_debug_flags;
-
+ wire [63:0] e2v_tdata_int;
+ wire e2v_tlast_int, e2v_tvalid_int, e2v_tready_int;
+
+ wire [63:0] e2z_tdata_int;
+ wire [3:0] e2z_tuser_int;
+ wire e2z_tlast_int, e2z_tvalid_int, e2z_tready_int;
+ wire [2:0] dispatch_debug_flags;
+
eth_dispatch #(.BASE(BASE+8)) eth_dispatch
(.clk(clk), .reset(reset), .clear(clear),
.set_stb(set_stb), .set_addr(set_addr) , .set_data(set_data),
.in_tdata(epg_tdata_int), .in_tuser(epg_tuser_int), .in_tlast(epg_tlast_int), .in_tvalid(epg_tvalid_int), .in_tready(epg_tready_int),
- .vita_tdata(e2v_tdata), .vita_tlast(e2v_tlast), .vita_tvalid(e2v_tvalid), .vita_tready(e2v_tready),
+ .vita_tdata(e2v_tdata_int), .vita_tlast(e2v_tlast_int), .vita_tvalid(e2v_tvalid_int), .vita_tready(e2v_tready_int),
.zpu_tdata(e2z_tdata_int), .zpu_tuser(e2z_tuser_int), .zpu_tlast(e2z_tlast_int), .zpu_tvalid(e2z_tvalid_int), .zpu_tready(e2z_tready_int),
.xo_tdata(xo_tdata), .xo_tuser(xo_tuser), .xo_tlast(xo_tlast), .xo_tvalid(xo_tvalid), .xo_tready(xo_tready), // to other eth port
.debug_flags(dispatch_debug_flags),.debug(debug));
+ axi_fifo_short #(.WIDTH(65)) e2v_pipeline_srl
+ (.clk(clk), .reset(reset), .clear(clear),
+ .i_tdata({e2v_tlast_int,e2v_tdata_int}), .i_tvalid(e2v_tvalid_int), .i_tready(e2v_tready_int),
+ .o_tdata({e2v_tlast,e2v_tdata}), .o_tvalid(e2v_tvalid), .o_tready(e2v_tready),
+ .space(), .occupied()
+ );
+
//
// ZPU can be slow to respond (relative to packet wirespeed) so extra buffer for packets destined there so it doesn't back up.
//
@@ -82,16 +95,16 @@ module eth_interface
// Outgoing Ethernet path
// Includes FIFOs on path from VITA router, from ethernet crossover, and on the overall output
- wire [63:0] eth_tx_tdata_int;
- wire [3:0] eth_tx_tuser_int;
- wire eth_tx_tlast_int, eth_tx_tvalid_int, eth_tx_tready_int;
+ wire [63:0] eth_tx_tdata_int;
+ wire [3:0] eth_tx_tuser_int;
+ wire eth_tx_tlast_int, eth_tx_tvalid_int, eth_tx_tready_int;
- wire [63:0] xi_tdata_int;
- wire [3:0] xi_tuser_int;
- wire xi_tlast_int, xi_tvalid_int, xi_tready_int;
+ wire [63:0] xi_tdata_int;
+ wire [3:0] xi_tuser_int;
+ wire xi_tlast_int, xi_tvalid_int, xi_tready_int;
- wire [63:0] v2e_tdata_int;
- wire v2e_tlast_int, v2e_tvalid_int, v2e_tready_int;
+ wire [63:0] v2e_tdata_int;
+ wire v2e_tlast_int, v2e_tvalid_int, v2e_tready_int;
axi_fifo #(.WIDTH(65),.SIZE(VITA_FIFOSIZE)) vitaout_fifo
(.clk(clk), .reset(reset), .clear(clear),
@@ -124,37 +137,4 @@ module eth_interface
.o_tdata({eth_tx_tlast,eth_tx_tuser,eth_tx_tdata}), .o_tvalid(eth_tx_tvalid), .o_tready(eth_tx_tready));
- //
- // Provide instrumentation so that abnormal FIFO conditions can be identifed.
- //
-/* -----\/----- EXCLUDED -----\/-----
-
- setting_reg #(.my_addr(BASE+15), .awidth(16), .width(1)) sr_reset_fifo_debug
- (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(),.changed(clear_debug_flags));
-
- always @(posedge clk)
- if (reset)
- debug_flags <= 0;
- else if (clear_debug_flags)
- debug_flags <= 0;
- else
- debug_flags <= debug_flags | {eth_rx_tuser[3],
- ~eth_tx_tready_int,
- ~xi_tready,
- ~v2e_tready,
- ~e2z_tready_int,
- ~eth_rx_tready,
- ~dispatch_debug_flags[2:0]};
- -----/\----- EXCLUDED -----/\----- */
-
- assign debug_flags = {eth_rx_tuser[3],
- ~eth_tx_tready_int,
- ~xi_tready,
- ~v2e_tready,
- ~e2z_tready_int,
- ~eth_rx_tready,
- ~dispatch_debug_flags[2:0]};
-
-
endmodule // eth_interface
diff --git a/fpga/usrp3/lib/xge_interface/xge_mac_wrapper.v b/fpga/usrp3/lib/xge_interface/xge_mac_wrapper.v
index 21c71ba37..c05682111 100644
--- a/fpga/usrp3/lib/xge_interface/xge_mac_wrapper.v
+++ b/fpga/usrp3/lib/xge_interface/xge_mac_wrapper.v
@@ -151,7 +151,7 @@ module xge_mac_wrapper
///////////////////////////////////////////////////////////////////////////////////////
wire [63:0] rx_tdata_int;
wire [3:0] rx_tuser_int;
- wire rx_talst_int;
+ wire rx_tlast_int;
wire rx_tvalid_int;
wire rx_tready_int;
@@ -194,7 +194,7 @@ module xge_mac_wrapper
// Large FIFO must be able to run input side at 64b@156MHz to sustain 10Gb Rx.
//
- axi64_8k_2clk_fifo rxfifo_2clk
+ axi64_4k_2clk_fifo rxfifo_2clk
(
.s_aresetn(~xgmii_reset),
.s_aclk(xgmii_clk),
@@ -235,7 +235,7 @@ module xge_mac_wrapper
wire tx_sof_int3;
- axi64_8k_2clk_fifo txfifo_2clk_1x
+ axi64_4k_2clk_fifo txfifo_2clk_1x
(
.s_aresetn(~xgmii_reset),
.s_aclk(sys_clk),
generated by cgit v1.2.3 (git 2.46.0) at 2025-11-04 13:43:53 +0000