1 files changed, 0 insertions, 74 deletions
diff --git a/fpga/usrp3/lib/dsp/rx_frontend.v b/fpga/usrp3/lib/dsp/rx_frontend.v
deleted file mode 100644
index e34a2954b..000000000
--- a/fpga/usrp3/lib/dsp/rx_frontend.v
+++ /dev/null
@@ -1,74 +0,0 @@
-
-module rx_frontend
-  #(parameter BASE = 0,
-    parameter IQCOMP_EN = 1)
-   (input clk, input rst,
-    input set_stb, input [7:0] set_addr, input [31:0] set_data,
-
-    input [15:0] adc_a, input adc_ovf_a,
-    input [15:0] adc_b, input adc_ovf_b,
-
-    output [23:0] i_out, output [23:0] q_out,
-    input run,
-    output [31:0] debug
-    );
-   
-   reg [15:0] 	  adc_i, adc_q;
-   wire [23:0] 	  adc_i_ofs, adc_q_ofs;
-   wire [35:0] 	  corr_i, corr_q; 
-   wire [17:0] 	  mag_corr,phase_corr;
-   wire 	  swap_iq;
-   
-   setting_reg #(.my_addr(BASE), .width(1)) sr_8
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(swap_iq),.changed());
-
-   always @(posedge clk)
-     if(swap_iq) // Swap
-       {adc_i,adc_q} <= {adc_b,adc_a};
-     else
-       {adc_i,adc_q} <= {adc_a,adc_b};
-       
-   setting_reg #(.my_addr(BASE+1),.width(18)) sr_1
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(mag_corr),.changed());
-   
-   setting_reg #(.my_addr(BASE+2),.width(18)) sr_2
-     (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
-      .in(set_data),.out(phase_corr),.changed());
-
-   rx_dcoffset #(.WIDTH(24),.ADDR(BASE+3)) rx_dcoffset_i
-     (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .in({adc_i,8'b00}),.out(adc_i_ofs));
-   
-   rx_dcoffset #(.WIDTH(24),.ADDR(BASE+4)) rx_dcoffset_q
-     (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
-      .in({adc_q,8'b00}),.out(adc_q_ofs));
-   
-   generate
-      if(IQCOMP_EN == 1)
-	begin
-	   MULT18X18S mult_mag_corr
-	     (.P(corr_i), .A(adc_i_ofs[23:6]), .B(mag_corr), .C(clk), .CE(1), .R(rst) ); 
-	   
-	   MULT18X18S mult_phase_corr
-	     (.P(corr_q), .A(adc_i_ofs[23:6]), .B(phase_corr), .C(clk), .CE(1), .R(rst) );
-	   
-	   add2_and_clip_reg #(.WIDTH(24)) add_clip_i
-	     (.clk(clk), .rst(rst), 
-	      .in1(adc_i_ofs), .in2(corr_i[35:12]), .strobe_in(1'b1),
-	      .sum(i_out), .strobe_out());
-	   
-	   add2_and_clip_reg #(.WIDTH(24)) add_clip_q
-	     (.clk(clk), .rst(rst), 
-	      .in1(adc_q_ofs), .in2(corr_q[35:12]), .strobe_in(1'b1),
-	      .sum(q_out), .strobe_out());
-	end // if (IQCOMP_EN == 1)
-      else
-	begin
-	   assign i_out = adc_i_ofs;
-	   assign q_out = adc_q_ofs;
-	end // else: !if(IQCOMP_EN == 1)
-   endgenerate
-   
-endmodule // rx_frontend