summaryrefslogtreecommitdiffstats
path: root/fpga/usrp2
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2')
-rw-r--r--fpga/usrp2/gpmc/Makefile.srcs3
-rw-r--r--fpga/usrp2/gpmc/cross_clock_reader.v8
-rw-r--r--fpga/usrp2/gpmc/fifo_to_gpmc.v9
-rw-r--r--fpga/usrp2/gpmc/gpmc.v156
-rw-r--r--fpga/usrp2/gpmc/gpmc_to_fifo.v45
-rw-r--r--fpga/usrp2/gpmc/gpmc_wb.v79
-rw-r--r--fpga/usrp2/top/E1x0/E1x0.ucf (renamed from fpga/usrp2/top/E1x0/u1e.ucf)0
-rw-r--r--fpga/usrp2/top/E1x0/E1x0.v (renamed from fpga/usrp2/top/E1x0/u1e.v)105
-rw-r--r--fpga/usrp2/top/E1x0/Makefile.E1008
-rw-r--r--fpga/usrp2/top/E1x0/Makefile.E1108
-rwxr-xr-xfpga/usrp2/top/E1x0/core_compile2
-rw-r--r--fpga/usrp2/top/E1x0/timing.ucf26
-rw-r--r--fpga/usrp2/top/E1x0/u1e_core.v494
13 files changed, 219 insertions, 724 deletions
diff --git a/fpga/usrp2/gpmc/Makefile.srcs b/fpga/usrp2/gpmc/Makefile.srcs
index 4c6a1b4a2..39b37db58 100644
--- a/fpga/usrp2/gpmc/Makefile.srcs
+++ b/fpga/usrp2/gpmc/Makefile.srcs
@@ -1,5 +1,5 @@
#
-# Copyright 2010-2011 Ettus Research LLC
+# Copyright 2010-2012 Ettus Research LLC
#
##################################################
@@ -10,5 +10,4 @@ cross_clock_reader.v \
fifo_to_gpmc.v \
gpmc.v \
gpmc_to_fifo.v \
-gpmc_wb.v \
))
diff --git a/fpga/usrp2/gpmc/cross_clock_reader.v b/fpga/usrp2/gpmc/cross_clock_reader.v
index a8366badc..b4cdb79c5 100644
--- a/fpga/usrp2/gpmc/cross_clock_reader.v
+++ b/fpga/usrp2/gpmc/cross_clock_reader.v
@@ -27,18 +27,20 @@ module cross_clock_reader
);
reg [WIDTH-1:0] shadow0, shadow1;
+ reg [2:0] count;
always @(posedge clk) begin
if (rst) begin
out <= DEFAULT;
shadow0 <= DEFAULT;
shadow1 <= DEFAULT;
+ count <= 0;
end
- else if (shadow0 == shadow1) begin
- out <= shadow1;
- end
+ else if (shadow0 == shadow1) count <= count + 1;
+ else count <= 0;
shadow0 <= in;
shadow1 <= shadow0;
+ if (count == 3'b111) out <= shadow1;
end
endmodule //cross_clock_reader
diff --git a/fpga/usrp2/gpmc/fifo_to_gpmc.v b/fpga/usrp2/gpmc/fifo_to_gpmc.v
index 42c71d2d6..27252b970 100644
--- a/fpga/usrp2/gpmc/fifo_to_gpmc.v
+++ b/fpga/usrp2/gpmc/fifo_to_gpmc.v
@@ -1,5 +1,5 @@
//
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@
////////////////////////////////////////////////////////////////////////
module fifo_to_gpmc
- #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10)
+ #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10, parameter LAST_ADDR = 10'h3ff)
(input clk, input reset, input clear, input arst,
input [17:0] data_i, input src_rdy_i, output dst_rdy_o,
output [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input EM_CLK, input EM_OE,
@@ -82,14 +82,15 @@ module fifo_to_gpmc
end
GPMC_STATE_EMPTY: begin
- if (EM_A == 10'h3ff) begin
+ if (EM_A == LAST_ADDR) begin
gpmc_state <= GPMC_STATE_START;
gpmc_ptr <= next_gpmc_ptr;
+ addr <= 0;
end
end
endcase //gpmc_state
- end //EM_WE
+ end //EM_OE
end //always
//------------------------------------------------------------------
diff --git a/fpga/usrp2/gpmc/gpmc.v b/fpga/usrp2/gpmc/gpmc.v
index a5d4db466..2ba69d184 100644
--- a/fpga/usrp2/gpmc/gpmc.v
+++ b/fpga/usrp2/gpmc/gpmc.v
@@ -1,5 +1,5 @@
//
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -18,7 +18,7 @@
//////////////////////////////////////////////////////////////////////////////////
module gpmc
- #(parameter TXFIFOSIZE = 11,
+ #(parameter TXFIFOSIZE = 11,
parameter RXFIFOSIZE = 11,
parameter ADDR_WIDTH = 10,
parameter BUSDEBUG = 1)
@@ -26,57 +26,51 @@ module gpmc
input arst,
input EM_CLK, inout [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input [1:0] EM_NBE,
input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE,
-
+
// GPIOs for FIFO signalling
- output rx_have_data, output tx_have_space,
-
- // Wishbone signals
- input wb_clk, input wb_rst,
- output [ADDR_WIDTH:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
- output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i,
-
+ output rx_have_data, output tx_have_space, output resp_have_data,
+
// FIFO interface
- input fifo_clk, input fifo_rst, input clear_tx, input clear_rx,
- output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
- input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
+ input fifo_clk, input fifo_rst,
+ output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy,
+ input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy,
+ output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy,
+ input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy,
- output tx_underrun, output rx_overrun,
- input [7:0] test_rate, input [3:0] test_ctrl,
output [31:0] debug
);
- wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6));
- wire [15:0] EM_D_fifo;
- wire [15:0] EM_D_wb;
+ wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6));
+ wire [15:0] EM_D_data;
+ wire [15:0] EM_D_ctrl;
- assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_fifo : EM_D_wb;
+ assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_data : EM_D_ctrl;
// CS4 is RAM_2PORT for DATA PATH (high-speed data)
// Writes go into one RAM, reads come from the other
- // CS6 is for CONTROL PATH (wishbone)
+ // CS6 is for CONTROL PATH (slow)
// ////////////////////////////////////////////
// TX Data Path
wire [17:0] tx18_data;
wire tx18_src_rdy, tx18_dst_rdy;
- wire [35:0] tx_data, txb_data;
- wire tx_src_rdy, tx_dst_rdy;
+ wire [35:0] txb_data;
wire txb_src_rdy, txb_dst_rdy;
gpmc_to_fifo #(.ADDR_WIDTH(ADDR_WIDTH)) gpmc_to_fifo
(.EM_D(EM_D), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS4 & ~EM_NWE),
- .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx), .arst(fifo_rst | clear_tx | arst),
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst),
.data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy),
.have_space(tx_have_space));
fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy),
.f36_dataout(txb_data), .f36_src_rdy_o(txb_src_rdy), .f36_dst_rdy_i(txb_dst_rdy));
fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_buffering(
- .clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.datain(txb_data), .src_rdy_i(txb_src_rdy), .dst_rdy_o(txb_dst_rdy),
.dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy)
);
@@ -86,74 +80,88 @@ module gpmc
wire [17:0] rx18_data;
wire rx18_src_rdy, rx18_dst_rdy;
- wire [35:0] rx_data, rxb_data;
- wire rx_src_rdy, rx_dst_rdy;
+ wire [35:0] rxb_data;
wire rxb_src_rdy, rxb_dst_rdy;
wire dummy;
fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_buffering(
- .clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy),
.dataout(rxb_data), .src_rdy_o(rxb_src_rdy), .dst_rdy_i(rxb_dst_rdy)
);
fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
.f36_datain(rxb_data), .f36_src_rdy_i(rxb_src_rdy), .f36_dst_rdy_o(rxb_dst_rdy),
.f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) );
- fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH)) fifo_to_gpmc
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx), .arst(fifo_rst | clear_rx | arst),
+ fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h3ff)) fifo_to_gpmc
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst),
.data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy),
- .EM_D(EM_D_fifo), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE),
+ .EM_D(EM_D_data), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE),
.data_available(rx_have_data));
// ////////////////////////////////////////////
// Control path on CS6
-
- gpmc_wb gpmc_wb
- (.EM_CLK(EM_CLK), .EM_D_in(EM_D), .EM_D_out(EM_D_wb), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WE(~EM_NCS6 & ~EM_NWE), .EM_OE(~EM_NCS6 & ~EM_NOE),
- .wb_clk(wb_clk), .wb_rst(wb_rst),
- .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso),
- .wb_sel_o(wb_sel_o), .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o),
- .wb_ack_i(wb_ack_i) );
+
+ // ////////////////////////////////////////////////////////////////////
+ // CTRL TX Data Path
+
+ wire [17:0] ctrl18_data;
+ wire ctrl18_src_rdy, ctrl18_dst_rdy;
+ wire [35:0] ctrlb_data;
+ wire ctrlb_src_rdy, ctrlb_dst_rdy;
+
+ gpmc_to_fifo #(.PTR_WIDTH(5), .ADDR_WIDTH(5)) ctrl_gpmc_to_fifo
+ (.EM_D(EM_D), .EM_A(EM_A[5:1]), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS6 & ~EM_NWE & (EM_A[ADDR_WIDTH:6] == 0)),
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst),
+ .data_o(ctrl18_data), .src_rdy_o(ctrl18_src_rdy), .dst_rdy_i(ctrl18_dst_rdy),
+ .have_space(/*always*/));
+
+ fifo19_to_fifo36 #(.LE(1)) ctrl_f19_to_f36 // Little endian because ARM is LE
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
+ .f19_datain({1'b0,ctrl18_data}), .f19_src_rdy_i(ctrl18_src_rdy), .f19_dst_rdy_o(ctrl18_dst_rdy),
+ .f36_dataout(ctrlb_data), .f36_src_rdy_o(ctrlb_src_rdy), .f36_dst_rdy_i(ctrlb_dst_rdy));
+
+ fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_buffering(
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
+ .datain(ctrlb_data), .src_rdy_i(ctrlb_src_rdy), .dst_rdy_o(ctrlb_dst_rdy),
+ .dataout(ctrl_data), .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy)
+ );
// ////////////////////////////////////////////
- // Test support, traffic generator, loopback, etc.
-
- // RX side muxes test data into the same stream
- wire [35:0] loopbackrx_data, testrx_data;
- wire [35:0] loopbacktx_data, testtx_data;
- wire loopbackrx_src_rdy, loopbackrx_dst_rdy;
- wire loopbacktx_src_rdy, loopbacktx_dst_rdy;
- wire sel_testtx = test_ctrl[0];
-
- fifo36_mux rx_test_mux_lvl_2
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .data0_i(loopbackrx_data), .src0_rdy_i(loopbackrx_src_rdy), .dst0_rdy_o(loopbackrx_dst_rdy),
- .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o),
- .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-
- fifo_short #(.WIDTH(36)) loopback_fifo
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx),
- .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy),
- .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy));
-
- // Crossbar used as a demux for switching TX stream to main DSP or to test logic
- crossbar36 tx_crossbar_lvl_1
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .cross(sel_testtx),
- .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy),
- .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input
- .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i),
- .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) );
-
- assign debug = {
- EM_D, //16
+ // CTRL RX Data Path
+
+ wire [17:0] resp18_data;
+ wire resp18_src_rdy, resp18_dst_rdy;
+ wire [35:0] respb_data;
+ wire respb_src_rdy, respb_dst_rdy;
+ wire resp_dummy;
+
+ fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_buffering(
+ .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
+ .datain(resp_data), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy),
+ .dataout(respb_data), .src_rdy_o(respb_src_rdy), .dst_rdy_i(respb_dst_rdy)
+ );
+
+ fifo36_to_fifo19 #(.LE(1)) resp_f36_to_f19 // Little endian because ARM is LE
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0),
+ .f36_datain(respb_data), .f36_src_rdy_i(respb_src_rdy), .f36_dst_rdy_o(respb_dst_rdy),
+ .f19_dataout({resp_dummy,resp18_data}), .f19_src_rdy_o(resp18_src_rdy), .f19_dst_rdy_i(resp18_dst_rdy) );
+
+ fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h00f)) resp_fifo_to_gpmc
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst),
+ .data_i(resp18_data), .src_rdy_i(resp18_src_rdy), .dst_rdy_o(resp18_dst_rdy),
+ .EM_D(EM_D_ctrl), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS6 & ~EM_NOE),
+ .data_available(resp_have_data));
+
+ assign debug = {
+ EM_D,
+ //resp18_data[15:0], //16
EM_A, //10
- EM_CLK, EM_NCS4, EM_NWE, EM_NOE, //4
- EM_NCS6, wb_ack_i
- };
+ //resp18_data[17:16], resp18_src_rdy, resp18_dst_rdy, //4
+ EM_NCS4, EM_NCS6, EM_NWE, EM_NOE, //4
+ EM_CLK, resp_have_data //2
+ };
endmodule // gpmc
diff --git a/fpga/usrp2/gpmc/gpmc_to_fifo.v b/fpga/usrp2/gpmc/gpmc_to_fifo.v
index cfc5aaa8b..680095620 100644
--- a/fpga/usrp2/gpmc/gpmc_to_fifo.v
+++ b/fpga/usrp2/gpmc/gpmc_to_fifo.v
@@ -1,5 +1,5 @@
//
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -22,7 +22,7 @@
// The GPMC is asynchronously alerted when a BRAM page is available.
//
// EM_CLK:
-// A GPMC read transaction consists of one EM_CLK cycle (idle low).
+// A GPMC write transaction consists of one EM_CLK cycle (idle low).
//
// EM_WE:
// Write enable is actually the combination of ~NWE & ~NCS.
@@ -36,7 +36,7 @@
////////////////////////////////////////////////////////////////////////
module gpmc_to_fifo
- #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10)
+ #(parameter PTR_WIDTH = 2, parameter ADDR_WIDTH = 10, parameter XFER_OFFSET = 2)
(input [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input EM_CLK, input EM_WE,
input clk, input reset, input clear, input arst,
output [17:0] data_o, output src_rdy_o, input dst_rdy_i,
@@ -45,17 +45,20 @@ module gpmc_to_fifo
//states for the GPMC side of things
wire [17:0] data_i;
reg gpmc_state;
- reg [ADDR_WIDTH:1] last_addr;
+ reg [15:0] vita_len;
+ reg [ADDR_WIDTH:1] addr;
+ wire [ADDR_WIDTH:1] last_addr = {vita_len[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + XFER_OFFSET;
reg [PTR_WIDTH:0] gpmc_ptr, next_gpmc_ptr;
localparam GPMC_STATE_START = 0;
localparam GPMC_STATE_FILL = 1;
//states for the FIFO side of things
- reg fifo_state;
+ reg [1:0] fifo_state;
reg [ADDR_WIDTH-1:0] counter;
reg [PTR_WIDTH:0] fifo_ptr;
localparam FIFO_STATE_CLAIM = 0;
localparam FIFO_STATE_EMPTY = 1;
+ localparam FIFO_STATE_PRE = 2;
//------------------------------------------------------------------
// State machine to control the data from GPMC to BRAM
@@ -65,14 +68,16 @@ module gpmc_to_fifo
gpmc_state <= GPMC_STATE_START;
gpmc_ptr <= 0;
next_gpmc_ptr <= 0;
+ addr <= 0;
end
else if (EM_WE) begin
+ addr <= EM_A + 1;
case(gpmc_state)
GPMC_STATE_START: begin
- if (EM_A == 2) begin
+ if (EM_A == XFER_OFFSET) begin
gpmc_state <= GPMC_STATE_FILL;
- last_addr <= {EM_D[ADDR_WIDTH-2:0], 1'b0} - 1'b1 + 2;
+ vita_len <= EM_D;
next_gpmc_ptr <= gpmc_ptr + 1;
end
end
@@ -81,6 +86,7 @@ module gpmc_to_fifo
if (data_i[17]) begin
gpmc_state <= GPMC_STATE_START;
gpmc_ptr <= next_gpmc_ptr;
+ addr <= 0;
end
end
@@ -105,6 +111,7 @@ module gpmc_to_fifo
cross_clock_reader #(.WIDTH(PTR_WIDTH+1)) read_next_gpmc_ptr
(.clk(clk), .rst(reset | clear), .in(next_gpmc_ptr), .out(safe_next_gpmc_ptr));
+ wire [PTR_WIDTH:0] fifo_ptr_next = fifo_ptr + 1;
always @(posedge clk)
if (reset | clear) have_space <= 0;
else have_space <= (fifo_ptr ^ (1 << PTR_WIDTH)) != safe_next_gpmc_ptr;
@@ -116,22 +123,28 @@ module gpmc_to_fifo
if (reset | clear) begin
fifo_state <= FIFO_STATE_CLAIM;
fifo_ptr <= 0;
- counter <= 2;
+ counter <= XFER_OFFSET;
end
else begin
case(fifo_state)
FIFO_STATE_CLAIM: begin
- if (bram_available_to_empty) fifo_state <= FIFO_STATE_EMPTY;
- counter <= 2;
+ if (bram_available_to_empty && data_o[16]) fifo_state <= FIFO_STATE_PRE;
+ counter <= XFER_OFFSET;
+ end
+
+ FIFO_STATE_PRE: begin
+ fifo_state <= FIFO_STATE_EMPTY;
+ counter <= counter + 1;
end
FIFO_STATE_EMPTY: begin
if (src_rdy_o && dst_rdy_i && data_o[17]) begin
fifo_state <= FIFO_STATE_CLAIM;
fifo_ptr <= fifo_ptr + 1;
+ counter <= XFER_OFFSET;
end
- if (src_rdy_o && dst_rdy_i) begin
+ else if (src_rdy_o && dst_rdy_i) begin
counter <= counter + 1;
end
end
@@ -140,18 +153,20 @@ module gpmc_to_fifo
end
end //always
+ wire enable = (fifo_state != FIFO_STATE_EMPTY) || dst_rdy_i;
+
assign src_rdy_o = fifo_state == FIFO_STATE_EMPTY;
//assign data and frame bits to bram input
assign data_i[15:0] = EM_D;
- assign data_i[16] = (gpmc_state == GPMC_STATE_START);
- assign data_i[17] = (EM_A == last_addr);
+ assign data_i[16] = (addr == XFER_OFFSET);
+ assign data_i[17] = (addr == last_addr);
//instantiate dual ported bram for async read + write
ram_2port #(.DWIDTH(18),.AWIDTH(PTR_WIDTH + ADDR_WIDTH)) async_fifo_bram
(.clka(~EM_CLK),.ena(1'b1),.wea(EM_WE),
- .addra({gpmc_ptr[PTR_WIDTH-1:0], EM_A}),.dia(data_i),.doa(),
- .clkb(~clk),.enb(1'b1),.web(1'b0),
+ .addra({gpmc_ptr[PTR_WIDTH-1:0], addr}),.dia(data_i),.doa(),
+ .clkb(clk),.enb(enable),.web(1'b0),
.addrb({fifo_ptr[PTR_WIDTH-1:0], counter}),.dib(18'h3ffff),.dob(data_o));
endmodule // gpmc_to_fifo
diff --git a/fpga/usrp2/gpmc/gpmc_wb.v b/fpga/usrp2/gpmc/gpmc_wb.v
deleted file mode 100644
index 4d368ca94..000000000
--- a/fpga/usrp2/gpmc/gpmc_wb.v
+++ /dev/null
@@ -1,79 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-
-module gpmc_wb
- (input EM_CLK, input [15:0] EM_D_in, output [15:0] EM_D_out, input [10:1] EM_A, input [1:0] EM_NBE,
- input EM_WE, input EM_OE,
-
- input wb_clk, input wb_rst,
- output reg [10:0] wb_adr_o, output reg [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
- output reg [1:0] wb_sel_o, output wb_cyc_o, output reg wb_stb_o, output reg wb_we_o, input wb_ack_i);
-
- // ////////////////////////////////////////////
- // Control Path, Wishbone bus bridge (wb master)
- reg [1:0] we_del, oe_del;
-
- // Synchronize the async control signals
- always @(posedge wb_clk)
- if (wb_rst) begin
- we_del <= 2'b0;
- oe_del <= 2'b0;
- end
- else begin
- we_del <= { we_del[0], EM_WE };
- oe_del <= { oe_del[0], EM_OE };
- end
-
- wire writing = we_del == 2'b01;
- wire reading = oe_del == 2'b01;
-
- always @(posedge wb_clk)
- if(writing || reading)
- wb_adr_o <= { EM_A, 1'b0 };
-
- always @(posedge wb_clk)
- if(writing)
- begin
- wb_dat_mosi <= EM_D_in;
- wb_sel_o <= ~EM_NBE;
- end
-
- reg [15:0] EM_D_hold;
-
- always @(posedge wb_clk)
- if(wb_ack_i)
- EM_D_hold <= wb_dat_miso;
-
- assign EM_D_out = wb_ack_i ? wb_dat_miso : EM_D_hold;
-
- assign wb_cyc_o = wb_stb_o;
-
- always @(posedge wb_clk)
- if(writing)
- wb_we_o <= 1;
- else if(wb_ack_i) // Turn off we when done. Could also use we_del[0], others...
- wb_we_o <= 0;
-
- always @(posedge wb_clk)
- if(writing || reading)
- wb_stb_o <= 1;
- else if(wb_ack_i)
- wb_stb_o <= 0;
-
-endmodule // gpmc_wb
diff --git a/fpga/usrp2/top/E1x0/u1e.ucf b/fpga/usrp2/top/E1x0/E1x0.ucf
index 278fc289a..278fc289a 100644
--- a/fpga/usrp2/top/E1x0/u1e.ucf
+++ b/fpga/usrp2/top/E1x0/E1x0.ucf
diff --git a/fpga/usrp2/top/E1x0/u1e.v b/fpga/usrp2/top/E1x0/E1x0.v
index 903ef7a6f..e7b0a4e00 100644
--- a/fpga/usrp2/top/E1x0/u1e.v
+++ b/fpga/usrp2/top/E1x0/E1x0.v
@@ -1,5 +1,5 @@
//
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -18,7 +18,7 @@
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
-module u1e
+module E1x0
(input CLK_FPGA_P, input CLK_FPGA_N, // Diff
output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
input debug_pb, output FPGA_TXD, input FPGA_RXD,
@@ -52,13 +52,23 @@ module u1e
input PPS_IN
);
+ assign FPGA_TXD = 0; //dont care
+
// /////////////////////////////////////////////////////////////////////////
// Clocking
- wire clk_fpga;
+ wire clk_fpga;
+ wire reset;
+
+ reg async_reset;
+ always @(negedge EM_CLK) begin
+ async_reset <= ~EM_NCS6 && ~EM_NWE && (EM_A[9:2] == 8'hff) && EM_D[0];
+ end
IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE"))
clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
+ reset_sync reset_sync(.clk(clk_fpga), .reset_in(async_reset), .reset_out(reset));
+
// /////////////////////////////////////////////////////////////////////////
// UART level conversion
assign fpga_txd1 = overo_txd1;
@@ -73,12 +83,12 @@ module u1e
assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
(~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
- //assign the aux spi to the cgen (bypasses wishbone)
+ //assign the aux spi to the cgen (bypasses control fifo)
assign cgen_sclk = overo_gpio65;
assign cgen_sen_b = overo_gpio128;
assign cgen_mosi = overo_gpio145;
- wire proc_int; //re-purpose gpio for interrupt when we are not using aux spi
- assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : proc_int;
+ wire has_resp; //re-purpose gpio for interrupt when we are not using aux spi
+ assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : has_resp;
wire _cgen_sen_b;
//assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi
@@ -121,29 +131,66 @@ module u1e
.D1(1'b1), // 1-bit data input (associated with C1)
.R(1'b0), // 1-bit reset input
.S(1'b0)); // 1-bit set input
-
+
// /////////////////////////////////////////////////////////////////////////
- // Main U1E Core
- u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(~debug_pb),
- .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
- .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD),
- .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS5(EM_NCS5),
- .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), .EM_NOE(EM_NOE),
- .db_sda(db_sda), .db_scl(db_scl),
- .sclk(sclk), .sen({_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx}), .mosi(mosi), .miso(miso),
- .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon),
- .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel),
- .tx_have_space(overo_gpio144),
- .rx_have_data(overo_gpio146),
- .io_tx(io_tx), .io_rx(io_rx),
- .tx_i(tx_i), .tx_q(tx_q),
- .rx_i(DA), .rx_q(DB),
- .pps_in(PPS_IN), .proc_int(proc_int) );
+ // Main Core
+ wire [35:0] rx_data, tx_data, ctrl_data, resp_data;
+ wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy;
+ wire dsp_rx_run, dsp_tx_run;
+ wire [7:0] sen8;
+ assign {_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx} = sen8[3:0];
+ wire [31:0] core_debug;
+
+ assign debug_led = ~{PPS_IN, dsp_tx_run, dsp_rx_run, cgen_st_ld};
+ wire cgen_sync;
+ assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1};
+
+ u1plus_core #(
+ .NUM_RX_DSPS(2),
+ .DSP_RX_XTRA_FIFOSIZE(10),
+ .DSP_TX_XTRA_FIFOSIZE(10),
+ .USE_PACKET_PADDER(0)
+ ) core(
+ .clk(clk_fpga), .reset(reset),
+ .debug(core_debug), .debug_clk(debug_clk),
+
+ .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
+ .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
+ .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
+ .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
+
+ .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run),
+ .clock_sync(cgen_sync),
+
+ .db_sda(db_sda), .db_scl(db_scl),
+ .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso),
+ .io_tx(io_tx), .io_rx(io_rx),
+ .tx_i(tx_i), .tx_q(tx_q),
+ .rx_i(DA), .rx_q(DB),
+ .pps_in(PPS_IN) );
// /////////////////////////////////////////////////////////////////////////
- // Local Debug
- // assign debug_clk = {clk_fpga, clk_2x };
- // assign debug = { TXSYNC, TXBLANK, TX };
-
-endmodule // u1e
+ // Interface between GPMC/host
+ wire [31:0] gpmc_debug;
+
+ gpmc #(.TXFIFOSIZE(13), .RXFIFOSIZE(13))
+ gpmc (.arst(async_reset),
+ .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
+ .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE),
+ .EM_NOE(EM_NOE),
+
+ .rx_have_data(overo_gpio146), .tx_have_space(overo_gpio144),
+ .resp_have_data(has_resp),
+
+ .fifo_clk(clk_fpga), .fifo_rst(reset),
+ .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
+ .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
+ .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
+ .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
+
+ .debug(gpmc_debug));
+
+ //assign debug = gpmc_debug;
+ assign debug = core_debug;
+
+endmodule // E1x0
diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100
index 3ba7e1031..92334d987 100644
--- a/fpga/usrp2/top/E1x0/Makefile.E100
+++ b/fpga/usrp2/top/E1x0/Makefile.E100
@@ -5,7 +5,7 @@
##################################################
# Project Setup
##################################################
-TOP_MODULE = u1e
+TOP_MODULE = E1x0
BUILD_DIR = $(abspath build$(ISE)-E100)
# set me in a custom makefile
@@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \
# Sources
##################################################
TOP_SRCS = \
-u1e_core.v \
-u1e.v \
-u1e.ucf \
+../B100/u1plus_core.v \
+E1x0.v \
+E1x0.ucf \
timing.ucf
SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110
index 89e51b523..e5be8d2fa 100644
--- a/fpga/usrp2/top/E1x0/Makefile.E110
+++ b/fpga/usrp2/top/E1x0/Makefile.E110
@@ -5,7 +5,7 @@
##################################################
# Project Setup
##################################################
-TOP_MODULE = u1e
+TOP_MODULE = E1x0
BUILD_DIR = $(abspath build$(ISE)-E110)
# set me in a custom makefile
@@ -48,9 +48,9 @@ simulator "ISE Simulator (VHDL/Verilog)" \
# Sources
##################################################
TOP_SRCS = \
-u1e_core.v \
-u1e.v \
-u1e.ucf \
+../B100/u1plus_core.v \
+E1x0.v \
+E1x0.ucf \
timing.ucf
SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile
index 14e138fa3..dd88094ff 100755
--- a/fpga/usrp2/top/E1x0/core_compile
+++ b/fpga/usrp2/top/E1x0/core_compile
@@ -1,3 +1,3 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac -y $XILINX/verilog/src/unisims u1e_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models
+iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E100.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models
diff --git a/fpga/usrp2/top/E1x0/timing.ucf b/fpga/usrp2/top/E1x0/timing.ucf
index 47c250c2f..6bd559426 100644
--- a/fpga/usrp2/top/E1x0/timing.ucf
+++ b/fpga/usrp2/top/E1x0/timing.ucf
@@ -3,25 +3,21 @@ NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P";
TIMESPEC "TS_clk_fpga_p" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %;
NET "EM_CLK" TNM_NET = "EM_CLK";
-TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 12048 ps HIGH 50 %;
+TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 18867 ps HIGH 50 %;
#constrain GPMC IO
-NET "EM_D<*>" MAXDELAY = 5.5 ns;
-NET "EM_A<*>" MAXDELAY = 5.5 ns;
-NET "EM_NBE<*>" MAXDELAY = 5.5 ns;
-NET "EM_NCS4" MAXDELAY = 5.5 ns;
-NET "EM_NCS6" MAXDELAY = 5.5 ns;
-NET "EM_NWE" MAXDELAY = 5.5 ns;
-NET "EM_NOE" MAXDELAY = 5.5 ns;
+INST "EM_D<*>" TNM = gpmc_net_out;
+INST "EM_D<*>" TNM = gpmc_net;
+INST "EM_A<*>" TNM = gpmc_net;
+INST "EM_NCS4" TNM = gpmc_net;
+INST "EM_NCS6" TNM = gpmc_net;
+INST "EM_NWE" TNM = gpmc_net;
+INST "EM_NOE" TNM = gpmc_net;
+
+TIMEGRP "gpmc_net" OFFSET = IN 7 ns VALID 14 ns BEFORE "EM_CLK" FALLING;
+TIMEGRP "gpmc_net_out" OFFSET = OUT 14 ns AFTER "EM_CLK" RISING; //2 clock cyc per read
#constrain interrupt lines
NET "overo_gpio144" MAXDELAY = 5.5 ns; #have space
NET "overo_gpio146" MAXDELAY = 5.5 ns; #have data
NET "overo_gpio147" MAXDELAY = 5.5 ns; #have msg/aux spi miso
-
-#NET "adc_a<*>" TNM_NET = ADC_DATA_GRP;
-#NET "adc_b<*>" TNM_NET = ADC_DATA_GRP;
-#TIMEGRP "ADC_DATA_GRP" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
-
-#NET "adc_a<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
-#NET "adc_b<*>" OFFSET = IN 1 ns VALID 5 ns BEFORE "clk_fpga_p" RISING;
diff --git a/fpga/usrp2/top/E1x0/u1e_core.v b/fpga/usrp2/top/E1x0/u1e_core.v
deleted file mode 100644
index fef988e62..000000000
--- a/fpga/usrp2/top/E1x0/u1e_core.v
+++ /dev/null
@@ -1,494 +0,0 @@
-//
-// Copyright 2011-2012 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-
-module u1e_core
- (input clk_fpga, input rst_fpga,
- output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
- output debug_txd, input debug_rxd,
-
- // GPMC
- input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
- input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6,
- input EM_NWE, input EM_NOE,
-
- inout db_sda, inout db_scl,
- output sclk, output [15:0] sen, output mosi, input miso,
-
- input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
- output tx_have_space, output rx_have_data,
- inout [15:0] io_tx, inout [15:0] io_rx,
- output [13:0] tx_i, output [13:0] tx_q,
- input [11:0] rx_i, input [11:0] rx_q,
-
- input pps_in, output reg proc_int
- );
-
- localparam TXFIFOSIZE = 13;
- localparam RXFIFOSIZE = 13;
-
- // 64 total regs in address space
- localparam SR_RX_CTRL0 = 0; // 9 regs (+0 to +8)
- localparam SR_RX_DSP0 = 10; // 4 regs (+0 to +3)
- localparam SR_RX_CTRL1 = 16; // 9 regs (+0 to +8)
- localparam SR_RX_DSP1 = 26; // 4 regs (+0 to +3)
- localparam SR_ERR_CTRL = 30; // 1 reg
- localparam SR_TX_CTRL = 32; // 4 regs (+0 to +3)
- localparam SR_TX_DSP = 38; // 3 regs (+0 to +2)
-
- localparam SR_TIME64 = 42; // 6 regs (+0 to +5)
- localparam SR_RX_FRONT = 48; // 5 regs (+0 to +4)
- localparam SR_TX_FRONT = 54; // 5 regs (+0 to +4)
-
- localparam SR_REG_TEST32 = 60; // 1 reg
- localparam SR_CLEAR_FIFO = 61; // 1 reg
- localparam SR_GLOBAL_RESET = 63; // 1 reg
- localparam SR_USER_REGS = 64; // 2 regs
-
- localparam SR_GPIO = 128; // 5 regs
-
- wire wb_clk = clk_fpga;
- wire wb_rst, global_reset;
-
- wire pps_int;
- wire [63:0] vita_time, vita_time_pps;
- reg [15:0] reg_cgen_ctrl, reg_test, xfer_rate;
- wire [7:0] test_rate;
- wire [3:0] test_ctrl;
-
- wire [7:0] set_addr, set_addr_user;
- wire [31:0] set_data, set_data_user;
- wire set_stb, set_stb_user;
-
- wire [31:0] debug_vt;
- wire rx_overrun_dsp0, rx_overrun_dsp1, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc;
- wire rx_overrun = rx_overrun_gpmc | rx_overrun_dsp0 | rx_overrun_dsp1;
- wire tx_underrun = tx_underrun_gpmc | tx_underrun_dsp;
-
- setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset
- (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(),.changed(global_reset));
-
- reset_sync reset_sync(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst));
-
- // /////////////////////////////////////////////////////////////////////////////////////
- // GPMC Slave to Wishbone Master
- localparam dw = 16;
- localparam aw = 11;
- localparam sw = 2;
-
- wire [dw-1:0] m0_dat_mosi, m0_dat_miso;
- wire [aw-1:0] m0_adr;
- wire [sw-1:0] m0_sel;
- wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty;
-
- wire [31:0] debug_gpmc;
-
- wire [35:0] tx_data, rx_data, tx_err_data;
- wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy,
- tx_err_src_rdy, tx_err_dst_rdy;
-
- wire clear_fifo;
-
- setting_reg #(.my_addr(SR_CLEAR_FIFO), .width(1)) sr_clear_fifo
- (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(),.changed(clear_fifo));
-
- wire run_rx0, run_rx1;
-
- gpmc #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE))
- gpmc (.arst(wb_rst),
- .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE),
- .EM_NOE(EM_NOE),
-
- .rx_have_data(rx_have_data), .tx_have_space(tx_have_space),
-
- .wb_clk(wb_clk), .wb_rst(wb_rst),
- .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso),
- .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we),
- .wb_ack_i(m0_ack),
-
- .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_fifo), .clear_rx(clear_fifo),
- .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy),
- .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy),
-
- .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc),
-
- .test_rate(test_rate), .test_ctrl(test_ctrl),
- .debug(debug_gpmc));
-
- wire rx_src_rdy_int, rx_dst_rdy_int, tx_src_rdy_int, tx_dst_rdy_int;
-
- wire [31:0] debug_rx_dsp, vrc_debug, vrf_debug, vr_debug;
-
- // /////////////////////////////////////////////////////////////////////////
- // RX ADC Frontend, does IQ Balance, DC Offset, muxing
-
- wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p
-
- rx_frontend #(.BASE(SR_RX_FRONT)) rx_frontend
- (.clk(wb_clk),.rst(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .adc_a({rx_i,4'b00}),.adc_ovf_a(0),
- .adc_b({rx_q,4'b00}),.adc_ovf_b(0),
- .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx0 | run_rx1), .debug());
-
- // /////////////////////////////////////////////////////////////////////////
- // DSP RX 0
-
- wire [31:0] sample_rx0;
- wire strobe_rx0, clear_rx0;
- wire [35:0] vita_rx_data0;
- wire vita_rx_src_rdy0, vita_rx_dst_rdy0;
-
- ddc_chain #(.BASE(SR_RX_DSP0), .DSPNO(0)) ddc_chain0
- (.clk(wb_clk), .rst(wb_rst), .clr(clear_rx0),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
- .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0),
- .debug() );
-
- vita_rx_chain #(.BASE(SR_RX_CTRL0), .UNIT(0), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(0)) vita_rx_chain0
- (.clk(wb_clk),.reset(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .vita_time(vita_time), .overrun(rx_overrun_dsp0),
- .sample(sample_rx0), .run(run_rx0), .strobe(strobe_rx0), .clear_o(clear_rx0),
- .rx_data_o(vita_rx_data0), .rx_dst_rdy_i(vita_rx_dst_rdy0), .rx_src_rdy_o(vita_rx_src_rdy0),
- .debug() );
-
- // /////////////////////////////////////////////////////////////////////////
- // DSP RX 1
-
- wire [31:0] sample_rx1;
- wire strobe_rx1, clear_rx1;
- wire [35:0] vita_rx_data1;
- wire vita_rx_src_rdy1, vita_rx_dst_rdy1;
-
- ddc_chain #(.BASE(SR_RX_DSP1), .DSPNO(1)) ddc_chain1
- (.clk(wb_clk),.rst(wb_rst), .clr(clear_rx1),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q),
- .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1),
- .debug() );
-
- vita_rx_chain #(.BASE(SR_RX_CTRL1), .UNIT(1), .FIFOSIZE(10), .PROT_ENG_FLAGS(0), .DSP_NUMBER(1)) vita_rx_chain1
- (.clk(wb_clk),.reset(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .vita_time(vita_time), .overrun(rx_overrun_dsp1),
- .sample(sample_rx1), .run(run_rx1), .strobe(strobe_rx1), .clear_o(clear_rx1),
- .rx_data_o(vita_rx_data1), .rx_dst_rdy_i(vita_rx_dst_rdy1), .rx_src_rdy_o(vita_rx_src_rdy1),
- .debug() );
-
- // /////////////////////////////////////////////////////////////////////////
- // RX Stream muxing
-
- fifo36_mux #(.prio(0)) mux_data_streams
- (.clk(wb_clk), .reset(wb_rst), .clear(clear_fifo),
- .data0_i(vita_rx_data0), .src0_rdy_i(vita_rx_src_rdy0), .dst0_rdy_o(vita_rx_dst_rdy0),
- .data1_i(vita_rx_data1), .src1_rdy_i(vita_rx_src_rdy1), .dst1_rdy_o(vita_rx_dst_rdy1),
- .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-
- // ///////////////////////////////////////////////////////////////////////////////////
- // DSP TX
-
- wire run_tx;
- wire [23:0] tx_fe_i, tx_fe_q;
- wire [31:0] sample_tx;
- wire strobe_tx, clear_tx;
-
- vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(10), .POST_ENGINE_FIFOSIZE(11),
- .REPORT_ERROR(1), .DO_FLOW_CONTROL(0),
- .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0),
- .DSP_NUMBER(0))
- vita_tx_chain
- (.clk(wb_clk), .reset(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .vita_time(vita_time),
- .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy),
- .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy),
- .sample(sample_tx), .strobe(strobe_tx),
- .underrun(tx_underrun_dsp), .run(run_tx), .clear_o(clear_tx),
- .debug(debug_vt));
-
- duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain
- (.clk(wb_clk), .rst(wb_rst), .clr(clear_tx),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user),
- .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q),
- .sample(sample_tx), .run(run_tx), .strobe(strobe_tx),
- .debug() );
-
- tx_frontend #(.BASE(SR_TX_FRONT), .WIDTH_OUT(14)) tx_frontend
- (.clk(wb_clk), .rst(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1),
- .dac_a(tx_i), .dac_b(tx_q));
-
- // /////////////////////////////////////////////////////////////////////////////////////
- // Wishbone Intercon, single master
- wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso,
- s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso,
- s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso,
- sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso;
- wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr;
- wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr;
- wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel;
- wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel;
- wire s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack;
- wire s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack;
- wire s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb;
- wire s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb;
- wire s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc;
- wire s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc;
- wire s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we;
- wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we;
-
- wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4),
- .s0_addr(4'h0), .s0_mask(4'hF), // Misc Regs
- .s1_addr(4'h1), .s1_mask(4'hF), // Unused
- .s2_addr(4'h2), .s2_mask(4'hF), // SPI
- .s3_addr(4'h3), .s3_mask(4'hF), // I2C
- .s4_addr(4'h4), .s4_mask(4'hF), // Unused
- .s5_addr(4'h5), .s5_mask(4'hF), // Unused on B1x0, Async Msg on E1x0
- .s6_addr(4'h6), .s6_mask(4'hF), // Unused
- .s7_addr(4'h7), .s7_mask(4'hF), // Readback MUX
- .s8_addr(4'h8), .s8_mask(4'h8), // Setting Regs -- slave 8 is 8 slaves wide
- // slaves 9-f alias to slave 1, all are unused
- .s9_addr(4'h1), .s9_mask(4'hF),
- .sa_addr(4'h1), .sa_mask(4'hF), .sb_addr(4'h1), .sb_mask(4'hF),
- .sc_addr(4'h1), .sc_mask(4'hF), .sd_addr(4'h1), .sd_mask(4'hF),
- .se_addr(4'h1), .se_mask(4'hF), .sf_addr(4'h1), .sf_mask(4'hF))
- wb_1master
- (.clk_i(wb_clk),.rst_i(wb_rst),
- .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi),
- .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb),
- .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb),
- .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0),
- .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb),
- .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0),
- .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb),
- .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0),
- .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb),
- .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0),
- .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb),
- .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0),
- .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb),
- .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0),
- .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb),
- .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0),
- .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb),
- .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0),
- .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb),
- .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0),
- .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb),
- .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0),
- .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb),
- .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0),
- .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb),
- .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0),
- .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb),
- .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0),
- .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb),
- .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0),
- .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb),
- .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0),
- .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb),
- .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) );
-
- assign s1_ack = 0; assign s4_ack = 0; assign s6_ack = 0;
- assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0;
- assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0;
-
- // /////////////////////////////////////////////////////////////////////////////////////
- // Slave 0, Misc LEDs, Switches, controls
-
- localparam REG_CGEN_CTRL = 7'd4; // out
- localparam REG_CGEN_ST = 7'd6; // in
- localparam REG_TEST = 7'd8; // out
- localparam REG_XFER_RATE = 7'd14; // out
-
- always @(posedge wb_clk)
- if(wb_rst)
- begin
- reg_cgen_ctrl <= 2'b11;
- reg_test <= 0;
- xfer_rate <= 0;
- end
- else
- if(s0_cyc & s0_stb & s0_we)
- case(s0_adr[6:0])
- REG_CGEN_CTRL :
- reg_cgen_ctrl <= s0_dat_mosi;
- REG_TEST :
- reg_test <= s0_dat_mosi;
- REG_XFER_RATE :
- xfer_rate <= s0_dat_mosi;
- endcase // case (s0_adr[6:0])
-
- assign test_ctrl = xfer_rate[11:8];
- assign test_rate = xfer_rate[7:0];
-
- assign { debug_led[3:0] } = ~{1'b1, run_tx, run_rx0 | run_rx1, cgen_st_ld};
- assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl;
-
- assign s0_dat_miso = (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl :
- (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} :
- (s0_adr[6:0] == REG_TEST) ? reg_test :
- 16'hBEEF;
-
- assign s0_ack = s0_stb & s0_cyc;
-
- // /////////////////////////////////////////////////////////////////////////////////////
- // Slave 2, SPI
-
- spi_top16 shared_spi
- (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi),
- .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb),
- .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(),
- .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) );
-
- // /////////////////////////////////////////////////////////////////////////
- // Slave 3, I2C
-
- wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o;
- i2c_master_top #(.ARST_LVL(1)) i2c
- (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0),
- .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]),
- .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc),
- .wb_ack_o(s3_ack),.wb_inta_o(),
- .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o),
- .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) );
-
- assign s3_dat_miso[15:8] = 8'd0;
-
- // I2C -- Don't use external transistors for open drain, the FPGA implements this
- IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o));
- IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o));
-
- // /////////////////////////////////////////////////////////////////////////
- // GPIOs
-
- wire [31:0] gpio_readback;
-
- gpio_atr #(.BASE(SR_GPIO), .WIDTH(32))
- gpio_atr(.clk(wb_clk),.reset(wb_rst),
- .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .rx(run_rx0 | run_rx1), .tx(run_tx),
- .gpio({io_tx,io_rx}), .gpio_readback(gpio_readback) );
-
- ////////////////////////////////////////////////////////////////////////////
- // FIFO to WB slave for async messages - Slave #5
-
- //signals between fifo and buffer module
- wire [35:0] _tx_err_data;
- wire _tx_err_src_rdy, _tx_err_dst_rdy;
-
- fifo_cascade #(.WIDTH(36), .SIZE(9/*512 lines plenty for short pkts*/)) err_fifo(
- .clk(wb_clk), .reset(wb_rst), .clear(wb_rst),
- .datain(tx_err_data), .src_rdy_i(tx_err_src_rdy), .dst_rdy_o(tx_err_dst_rdy),
- .dataout(_tx_err_data), .src_rdy_o(_tx_err_src_rdy), .dst_rdy_i(_tx_err_dst_rdy)
- );
-
- wire [31:0] err_status, err_data32;
- //the buffer is 32 bits, but the data is 16, so mux based on the addr bit
- assign s5_dat_miso = (s5_adr[1] == 1'b0)? err_data32[15:0] : err_data32[31:16];
-
- buffer_int2 #(.BASE(SR_ERR_CTRL), .BUF_SIZE(5)) fifo_to_wb(
- .clk(wb_clk), .rst(wb_rst),
- .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .status(err_status),
- // Wishbone interface to RAM
- .wb_clk_i(wb_clk), .wb_rst_i(wb_rst),
- .wb_we_i(s5_we), .wb_stb_i(s5_stb),
- .wb_adr_i({5'b0,s5_adr}), .wb_dat_i({16'b0, s5_dat_mosi}),
- .wb_dat_o(err_data32), .wb_ack_o(s5_ack),
- // Write FIFO Interface
- .wr_data_i(_tx_err_data), .wr_ready_i(_tx_err_src_rdy), .wr_ready_o(_tx_err_dst_rdy),
- // Read FIFO Interface
- .rd_data_o(), .rd_ready_o(), .rd_ready_i(1'b0)
- );
-
- ////////////////////////////////////////////////////////////////////////////
- // Interrupts
-
- always @(posedge wb_clk)
- proc_int <= (|err_status[1:0]);
-
- // /////////////////////////////////////////////////////////////////////////
- // Settings Bus -- Slave #8 + 9
-
- // only have 64 regs, 32 bits each with current setup...
- settings_bus_16LE #(.AWIDTH(11),.RWIDTH(8)) settings_bus_16LE
- (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr),.wb_dat_i(s8_dat_mosi),
- .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack),
- .strobe(set_stb),.addr(set_addr),.data(set_data) );
-
- user_settings #(.BASE(SR_USER_REGS)) user_settings
- (.clk(wb_clk),.rst(wb_rst),.set_stb(set_stb),
- .set_addr(set_addr),.set_data(set_data),
- .set_addr_user(set_addr_user),.set_data_user(set_data_user),
- .set_stb_user(set_stb_user) );
-
- // /////////////////////////////////////////////////////////////////////////
- // Readback mux 32 -- Slave #7
-
- //compatibility number -> increment when the fpga has been sufficiently altered
- localparam compat_num = {16'd10, 16'd2}; //major, minor
-
- wire [31:0] reg_test32;
-
- //this setting reg is persistent across resets, to check for fpga loaded
- setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32
- (.clk(wb_clk),.rst(/*wb_rst*/1'b0),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(reg_test32),.changed());
-
- wb_readback_mux_16LE readback_mux_32
- (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb),
- .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack),
-
- .word00(vita_time[63:32]), .word01(vita_time[31:0]),
- .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]),
- .word04(reg_test32), .word05(err_status),
- .word06(compat_num), .word07(gpio_readback),
- .word08(32'b0), .word09(32'b0),
- .word10(32'b0), .word11(32'b0),
- .word12(32'b0), .word13(32'b0),
- .word14(32'b0), .word15(32'b0)
- );
-
- // /////////////////////////////////////////////////////////////////////////
- // VITA Timing
-
- time_64bit #(.BASE(SR_TIME64)) time_64bit
- (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
- .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int),
- .exp_time_in(0));
-
- // /////////////////////////////////////////////////////////////////////////////////////
- // Debug circuitry
-
- assign debug_clk = 2'b00; //{ EM_CLK, clk_fpga };
- assign debug = 0;
-
-endmodule // u1e_core
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 10:28:28 +0000