aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp2/udp
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2/udp')
-rw-r--r--fpga/usrp2/udp/Makefile.srcs13
-rw-r--r--fpga/usrp2/udp/add_onescomp.v12
-rw-r--r--fpga/usrp2/udp/fifo19_rxrealign.v42
-rw-r--r--fpga/usrp2/udp/prot_eng_rx.v121
-rw-r--r--fpga/usrp2/udp/prot_eng_tx.v128
-rw-r--r--fpga/usrp2/udp/prot_eng_tx_tb.v167
-rw-r--r--fpga/usrp2/udp/udp_wrapper.v92
7 files changed, 575 insertions, 0 deletions
diff --git a/fpga/usrp2/udp/Makefile.srcs b/fpga/usrp2/udp/Makefile.srcs
new file mode 100644
index 000000000..293094abe
--- /dev/null
+++ b/fpga/usrp2/udp/Makefile.srcs
@@ -0,0 +1,13 @@
+#
+# Copyright 2010 Ettus Research LLC
+#
+
+##################################################
+# UDP Sources
+##################################################
+UDP_SRCS = $(abspath $(addprefix $(BASE_DIR)/../udp/, \
+udp_wrapper.v \
+fifo19_rxrealign.v \
+prot_eng_tx.v \
+add_onescomp.v \
+))
diff --git a/fpga/usrp2/udp/add_onescomp.v b/fpga/usrp2/udp/add_onescomp.v
new file mode 100644
index 000000000..048842a86
--- /dev/null
+++ b/fpga/usrp2/udp/add_onescomp.v
@@ -0,0 +1,12 @@
+
+
+module add_onescomp
+ #(parameter WIDTH = 16)
+ (input [WIDTH-1:0] A,
+ input [WIDTH-1:0] B,
+ output [WIDTH-1:0] SUM);
+
+ wire [WIDTH:0] SUM_INT = {1'b0,A} + {1'b0,B};
+ assign SUM = SUM_INT[WIDTH-1:0] + {{WIDTH-1{1'b0}},SUM_INT[WIDTH]};
+
+endmodule // add_onescomp
diff --git a/fpga/usrp2/udp/fifo19_rxrealign.v b/fpga/usrp2/udp/fifo19_rxrealign.v
new file mode 100644
index 000000000..35ad90951
--- /dev/null
+++ b/fpga/usrp2/udp/fifo19_rxrealign.v
@@ -0,0 +1,42 @@
+
+
+// Adds a junk line at the beginning of every packet, which the
+// following stages should ignore. This gives us proper alignment due
+// to the 14 byte ethernet header
+
+// Bit 18 -- odd length
+// Bit 17 -- eof
+// Bit 16 -- sof
+// Bit 15:0 -- data
+
+module fifo19_rxrealign
+ (input clk, input reset, input clear,
+ input [18:0] datain, input src_rdy_i, output dst_rdy_o,
+ output [18:0] dataout, output src_rdy_o, input dst_rdy_i);
+
+ reg rxre_state;
+ localparam RXRE_DUMMY = 0;
+ localparam RXRE_PKT = 1;
+
+ assign dataout[18] = datain[18];
+ assign dataout[17] = datain[17];
+ assign dataout[16] = (rxre_state==RXRE_DUMMY) | (datain[17] & datain[16]); // allows for passing error signal
+ assign dataout[15:0] = datain[15:0];
+
+ always @(posedge clk)
+ if(reset | clear)
+ rxre_state <= RXRE_DUMMY;
+ else if(src_rdy_i & dst_rdy_i)
+ case(rxre_state)
+ RXRE_DUMMY :
+ rxre_state <= RXRE_PKT;
+ RXRE_PKT :
+ if(datain[17]) // if eof or error
+ rxre_state <= RXRE_DUMMY;
+ endcase // case (rxre_state)
+
+ assign src_rdy_o = src_rdy_i & dst_rdy_i; // Send anytime both sides are ready
+ assign dst_rdy_o = src_rdy_i & dst_rdy_i & (rxre_state == RXRE_PKT); // Only consume after the dummy
+
+endmodule // fifo19_rxrealign
+
diff --git a/fpga/usrp2/udp/prot_eng_rx.v b/fpga/usrp2/udp/prot_eng_rx.v
new file mode 100644
index 000000000..5df158b2b
--- /dev/null
+++ b/fpga/usrp2/udp/prot_eng_rx.v
@@ -0,0 +1,121 @@
+
+
+
+// Protocol Engine Receiver
+// Checks each line (16 bits) against values in setting regs
+// 3 options for each line --
+// Error if mismatch, Slowpath if mismatch, or ignore line
+// The engine increases the length of each packet by 32 or 48 bits,
+// bringing the total length to a multiple of 32 bits. The last line
+// is entirely new, and contains the results of the matching operation:
+// 16 bits of flags, 16 bits of data. Flags indicate error or slowpath
+// Data indicates line that caused mismatch if any.
+
+
+// Flags[2:0] is {occ, eop, sop}
+// Protocol word format is:
+// 22 Last Header Line
+// 21 SLOWPATH if mismatch
+// 20 ERROR if mismatch
+// 19 This is the IP checksum
+// 18 This is the UDP checksum
+// 17 Compute IP checksum on this word
+// 16 Compute UDP checksum on this word
+// 15:0 data word to be matched
+
+module prot_eng_rx
+ #(parameter BASE=0)
+ (input clk, input reset, input clear,
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+ input [18:0] datain, input src_rdy_i, output dst_rdy_o,
+ output [18:0] dataout, output src_rdy_o, input dst_rdy_i);
+
+ localparam HDR_WIDTH = 16 + 7; // 16 bits plus flags
+ localparam HDR_LEN = 32; // Up to 64 bytes of protocol
+
+ // Store header values in a small dual-port (distributed) ram
+ reg [HDR_WIDTH-1:0] header_ram[0:HDR_LEN-1];
+ wire [HDR_WIDTH-1:0] header_word;
+
+ always @(posedge clk)
+ if(set_stb & ((set_addr & 8'hE0) == BASE))
+ header_ram[set_addr[4:0]] <= set_data;
+
+ assign header_word = header_ram[state];
+
+ wire consume_input = src_rdy_i & dst_rdy_o;
+ wire produce_output = src_rdy_o & dst_rdy_i;
+
+ // Main State Machine
+ reg [15:0] pkt_length, fail_word, dataout_int;
+
+ reg slowpath, error, sof_o, eof_o, occ_o, odd;
+
+ assign dataout = {occ_o, eof_o, sof_o, dataout_int};
+
+ wire [15:0] calc_ip_checksum, calc_udp_checksum;
+ reg [15:0] rx_ip_checksum, rx_udp_checksum;
+
+ always @(posedge clk)
+ if(header_word[19])
+ rx_ip_checksum <= datain[15:0];
+ always @(posedge clk)
+ if(header_word[18])
+ rx_udp_checksum <= datain[15:0];
+
+ always @(posedge clk)
+ if(reset | clear)
+ begin
+ slowpath <= 0;
+ error <= 0;
+ state <= 0;
+ fail_word <= 0;
+ eof_o <= 0;
+ occ_o <= 0;
+ end
+ else if(src_rdy_i & dst_rdy_i)
+ case (state)
+ 0 :
+ begin
+ slowpath <= 0;
+ error <= 0;
+ eof_o <= 0;
+ occ_o <= 0;
+ state <= 1;
+ end
+
+ ST_SLOWPATH :
+ ;
+ ST_ERROR :
+ ;
+ ST_PAYLOAD :
+ ;
+ ST_FILLER :
+ ;
+ ST_END1 :
+ ;
+ ST_END2 :
+ ;
+ default :
+ if(header_word[21] && mismatch)
+ state <= ST_SLOWPATH;
+ else if(header_word[20] && mismatch)
+ state <= ST_ERROR;
+ else if(header_word[22])
+ state <= ST_PAYLOAD;
+ else
+ state <= state + 1;
+ endcase // case (state)
+
+
+
+ // IP + UDP checksum state machines
+ checksum_sm ip_chk
+ (.clk(clk), .reset(reset), .in(datain),
+ .calc(consume_input & header_word[17]), .clear(state==0), .checksum(ip_checksum));
+
+ checksum_sm udp_chk
+ (.clk(clk), .reset(reset), .in(datain),
+ .calc(consume_input & header_word[16]), .clear(state==0), .checksum(udp_checksum));
+
+endmodule // prot_eng_rx
diff --git a/fpga/usrp2/udp/prot_eng_tx.v b/fpga/usrp2/udp/prot_eng_tx.v
new file mode 100644
index 000000000..a18eb73ae
--- /dev/null
+++ b/fpga/usrp2/udp/prot_eng_tx.v
@@ -0,0 +1,128 @@
+
+// The input FIFO contents should be 16 bits wide
+// The first word is 1 for fast path (accelerated protocol)
+// 0 for software implemented protocol
+// The second word is the number of bytes in the packet,
+// and must be valid even if we are in slow path mode
+// Odd means the last word is half full
+// Flags[1:0] is {eop, sop}
+// Protocol word format is:
+// 19 Last Header Line
+// 18 IP Header Checksum XOR
+// 17 IP Length Here
+// 16 UDP Length Here
+// 15:0 data word to be sent
+
+module prot_eng_tx
+ #(parameter BASE=0)
+ (input clk, input reset, input clear,
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+ input [18:0] datain, input src_rdy_i, output dst_rdy_o,
+ output [18:0] dataout, output src_rdy_o, input dst_rdy_i);
+
+ wire [2:0] flags_i = datain[18:16];
+ reg [15:0] dataout_int;
+ reg fast_path, sof_o;
+
+ wire [2:0] flags_o = {flags_i[2], flags_i[1], sof_o}; // OCC, EOF, SOF
+
+ assign dataout = {flags_o[2:0], dataout_int[15:0]};
+
+ reg [4:0] state;
+ wire do_payload = (state == 31);
+
+ assign dst_rdy_o = dst_rdy_i & (do_payload | (state==0) | (state==1) | (state==30));
+ assign src_rdy_o = src_rdy_i & ~((state==0) | (state==1) | (state==30));
+
+ localparam HDR_WIDTH = 16 + 4; // 16 bits plus flags
+ localparam HDR_LEN = 32; // Up to 64 bytes of protocol
+
+ // Store header values in a small dual-port (distributed) ram
+ reg [HDR_WIDTH-1:0] header_ram[0:HDR_LEN-1];
+ wire [HDR_WIDTH-1:0] header_word;
+ reg [15:0] chk_precompute;
+
+ always @(posedge clk)
+ if(set_stb & ((set_addr & 8'hE0) == BASE))
+ begin
+ header_ram[set_addr[4:0]] <= set_data;
+ if(set_data[18])
+ chk_precompute <= set_data[15:0];
+ end
+
+ assign header_word = header_ram[state];
+
+ wire last_hdr_line = header_word[19];
+ wire ip_chk = header_word[18];
+ wire ip_len = header_word[17];
+ wire udp_len = header_word[16];
+
+ // Protocol State Machine
+ reg [15:0] length;
+ wire [15:0] ip_length = length + 28; // IP HDR + UDP HDR
+ wire [15:0] udp_length = length + 8; // UDP HDR
+
+ always @(posedge clk)
+ if(reset)
+ begin
+ state <= 0;
+ fast_path <= 0;
+ sof_o <= 0;
+ end
+ else
+ if(src_rdy_i & dst_rdy_i)
+ case(state)
+ 0 :
+ begin
+ fast_path <= datain[0];
+ state <= 1;
+ end
+ 1 :
+ begin
+ length <= datain[15:0];
+ sof_o <= 1;
+ if(fast_path)
+ state <= 2;
+ else
+ state <= 30; // Skip 1 word for alignment
+ end
+ 30 :
+ state <= 31;
+ 31 :
+ begin
+ sof_o <= 0;
+ if(flags_i[1]) // eop
+ state <= 0;
+ end
+ default :
+ begin
+ sof_o <= 0;
+ if(~last_hdr_line)
+ state <= state + 1;
+ else
+ state <= 31;
+ end
+ endcase // case (state)
+
+ wire [15:0] checksum;
+ add_onescomp #(.WIDTH(16)) add_onescomp
+ (.A(chk_precompute),.B(ip_length),.SUM(checksum));
+
+ reg [15:0] checksum_reg;
+ always @(posedge clk)
+ checksum_reg <= checksum;
+
+ always @*
+ if(ip_chk)
+ //dataout_int <= header_word[15:0] ^ ip_length;
+ dataout_int <= 16'hFFFF ^ checksum_reg;
+ else if(ip_len)
+ dataout_int <= ip_length;
+ else if(udp_len)
+ dataout_int <= udp_length;
+ else if(do_payload)
+ dataout_int <= datain[15:0];
+ else
+ dataout_int <= header_word[15:0];
+
+endmodule // prot_eng_tx
diff --git a/fpga/usrp2/udp/prot_eng_tx_tb.v b/fpga/usrp2/udp/prot_eng_tx_tb.v
new file mode 100644
index 000000000..e7ffeb5e1
--- /dev/null
+++ b/fpga/usrp2/udp/prot_eng_tx_tb.v
@@ -0,0 +1,167 @@
+module prot_eng_tx_tb();
+
+ localparam BASE = 128;
+ reg clk = 0;
+ reg rst = 1;
+ reg clear = 0;
+ initial #1000 rst = 0;
+ always #50 clk = ~clk;
+
+ reg [31:0] f36_data;
+ reg [1:0] f36_occ;
+ reg f36_sof, f36_eof;
+
+ wire [35:0] f36_in = {f36_occ,f36_eof,f36_sof,f36_data};
+ reg src_rdy_f36i = 0;
+ reg [15:0] count;
+
+ wire [35:0] casc_do;
+ wire [18:0] final_out, prot_out;
+
+ wire src_rdy_final, dst_rdy_final, src_rdy_prot;
+ reg dst_rdy_prot =0;
+
+ wire dst_rdy_f36o ;
+ fifo_long #(.WIDTH(36), .SIZE(4)) fifo_cascade36
+ (.clk(clk),.reset(rst),.clear(clear),
+ .datain(f36_in),.src_rdy_i(src_rdy_f36i),.dst_rdy_o(dst_rdy_f36i),
+ .dataout(casc_do),.src_rdy_o(src_rdy_f36o),.dst_rdy_i(dst_rdy_f36o));
+
+ fifo36_to_fifo19 fifo_converter
+ (.clk(clk),.reset(rst),.clear(clear),
+ .f36_datain(casc_do),.f36_src_rdy_i(src_rdy_f36o),.f36_dst_rdy_o(dst_rdy_f36o),
+ .f19_dataout(final_out),.f19_src_rdy_o(src_rdy_final),.f19_dst_rdy_i(dst_rdy_final));
+
+ reg set_stb;
+ reg [7:0] set_addr;
+ reg [31:0] set_data;
+
+ prot_eng_tx #(.BASE(BASE)) prot_eng_tx
+ (.clk(clk), .reset(rst),
+ .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
+ .datain(final_out[18:0]),.src_rdy_i(src_rdy_final),.dst_rdy_o(dst_rdy_final),
+ .dataout(prot_out[18:0]),.src_rdy_o(src_rdy_prot),.dst_rdy_i(dst_rdy_prot));
+
+ reg [35:0] printer;
+
+ task WriteSREG;
+ input [7:0] addr;
+ input [31:0] data;
+
+ begin
+ @(posedge clk);
+ set_addr <= addr;
+ set_data <= data;
+ set_stb <= 1;
+ @(posedge clk);
+ set_stb <= 0;
+ end
+ endtask // WriteSREG
+
+ task ReadFromFIFO36;
+ begin
+ $display("Read from FIFO36");
+ #1 dst_rdy_prot <= 1;
+ while(~src_rdy_prot)
+ @(posedge clk);
+ while(1)
+ begin
+ while(~src_rdy_prot)
+ @(posedge clk);
+ $display("Read: %h",prot_out);
+ @(posedge clk);
+ end
+ end
+ endtask // ReadFromFIFO36
+
+ task PutPacketInFIFO36;
+ input [31:0] data_start;
+ input [31:0] data_len;
+ begin
+ count <= 4;
+ src_rdy_f36i <= 1;
+ f36_data <= 32'h0001_000c;
+ f36_sof <= 1;
+ f36_eof <= 0;
+ f36_occ <= 0;
+
+ $display("Put Packet in FIFO36");
+ while(~dst_rdy_f36i)
+ @(posedge clk);
+ @(posedge clk);
+ $display("PPI_FIFO36: Entered First Line");
+ f36_sof <= 0;
+ f36_data <= data_start;
+ while(~dst_rdy_f36i)
+ @(posedge clk);
+ @(posedge clk);
+ while(count+4 < data_len)
+ begin
+ f36_data <= f36_data + 32'h01010101;
+ count <= count + 4;
+ while(~dst_rdy_f36i)
+ @(posedge clk);
+ @(posedge clk);
+ $display("PPI_FIFO36: Entered New Line");
+ end
+ f36_data <= f36_data + 32'h01010101;
+ f36_eof <= 1;
+ if(count + 4 == data_len)
+ f36_occ <= 0;
+ else if(count + 3 == data_len)
+ f36_occ <= 3;
+ else if(count + 2 == data_len)
+ f36_occ <= 2;
+ else
+ f36_occ <= 1;
+ while(~dst_rdy_f36i)
+ @(posedge clk);
+ @(posedge clk);
+ f36_occ <= 0;
+ f36_eof <= 0;
+ f36_data <= 0;
+ src_rdy_f36i <= 0;
+ $display("PPI_FIFO36: Entered Last Line");
+ end
+ endtask // PutPacketInFIFO36
+
+ initial $dumpfile("prot_eng_tx_tb.vcd");
+ initial $dumpvars(0,prot_eng_tx_tb);
+
+ initial
+ begin
+ #10000;
+ @(posedge clk);
+ ReadFromFIFO36;
+ end
+
+ initial
+ begin
+ @(negedge rst);
+ @(posedge clk);
+ WriteSREG(BASE, {12'b0, 4'h0, 16'h0000});
+ WriteSREG(BASE+1, {12'b0, 4'h0, 16'h0000});
+ WriteSREG(BASE+2, {12'b0, 4'h0, 16'hABCD});
+ WriteSREG(BASE+3, {12'b0, 4'h0, 16'h1234});
+ WriteSREG(BASE+4, {12'b0, 4'h8, 16'h5678});
+ WriteSREG(BASE+5, {12'b0, 4'h0, 16'hABCD});
+ WriteSREG(BASE+6, {12'b0, 4'h0, 16'hABCD});
+ WriteSREG(BASE+7, {12'b0, 4'h0, 16'hABCD});
+ WriteSREG(BASE+8, {12'b0, 4'h0, 16'hABCD});
+ WriteSREG(BASE+9, {12'b0, 4'h0, 16'hABCD});
+ @(posedge clk);
+ PutPacketInFIFO36(32'hA0B0C0D0,16);
+ @(posedge clk);
+ @(posedge clk);
+ #10000;
+ @(posedge clk);
+ PutPacketInFIFO36(32'hE0F0A0B0,36);
+ @(posedge clk);
+ @(posedge clk);
+ @(posedge clk);
+ @(posedge clk);
+ @(posedge clk);
+ end
+
+ initial #20000 $finish;
+endmodule // prot_eng_tx_tb
diff --git a/fpga/usrp2/udp/udp_wrapper.v b/fpga/usrp2/udp/udp_wrapper.v
new file mode 100644
index 000000000..f4c642615
--- /dev/null
+++ b/fpga/usrp2/udp/udp_wrapper.v
@@ -0,0 +1,92 @@
+
+module udp_wrapper
+ #(parameter BASE=0)
+ (input clk, input reset, input clear,
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+ input [18:0] rx_f19_data, input rx_f19_src_rdy_i, output rx_f19_dst_rdy_o,
+ output [18:0] tx_f19_data, output tx_f19_src_rdy_o, input tx_f19_dst_rdy_i,
+
+ output [35:0] rx_f36_data, output rx_f36_src_rdy_o, input rx_f36_dst_rdy_i,
+ input [35:0] tx_f36_data, input tx_f36_src_rdy_i, output tx_f36_dst_rdy_o,
+ output [31:0] debug
+ );
+
+ wire tx_int1_src_rdy, tx_int1_dst_rdy;
+ wire [18:0] tx_int1_data;
+
+ wire tx_int2_src_rdy, tx_int2_dst_rdy;
+ wire [18:0] tx_int2_data;
+ wire [31:0] debug_state;
+
+ // TX side
+ fifo36_to_fifo19 fifo36_to_fifo19
+ (.clk(clk), .reset(reset), .clear(clear),
+ .f36_datain(tx_f36_data), .f36_src_rdy_i(tx_f36_src_rdy_i), .f36_dst_rdy_o(tx_f36_dst_rdy_o),
+ .f19_dataout(tx_int1_data), .f19_src_rdy_o(tx_int1_src_rdy), .f19_dst_rdy_i(tx_int1_dst_rdy) );
+
+ fifo_short #(.WIDTH(19)) shortfifo19_a
+ (.clk(clk), .reset(reset), .clear(clear),
+ .datain(tx_int1_data), .src_rdy_i(tx_int1_src_rdy), .dst_rdy_o(tx_int1_dst_rdy),
+ .dataout(tx_int2_data), .src_rdy_o(tx_int2_src_rdy), .dst_rdy_i(tx_int2_dst_rdy),
+ .space(), .occupied() );
+
+ prot_eng_tx #(.BASE(BASE)) prot_eng_tx
+ (.clk(clk), .reset(reset), .clear(clear),
+ .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+ .datain(tx_int2_data), .src_rdy_i(tx_int2_src_rdy), .dst_rdy_o(tx_int2_dst_rdy),
+ .dataout(tx_f19_data), .src_rdy_o(tx_f19_src_rdy_o), .dst_rdy_i(tx_f19_dst_rdy_i) );
+
+ // RX side
+ wire rx_int1_src_rdy, rx_int1_dst_rdy;
+ wire [18:0] rx_int1_data;
+
+ wire rx_int2_src_rdy, rx_int2_dst_rdy;
+ wire [18:0] rx_int2_data;
+
+ //wire rx_int3_src_rdy, rx_int3_dst_rdy;
+ //wire [35:0] rx_int3_data;
+
+`ifdef USE_PROT_ENG
+ prot_eng_rx #(.BASE(BASE+32)) prot_eng_rx
+ (.clk(clk), .reset(reset), .clear(clear),
+ .datain(rx_f19_data), .src_rdy_i(rx_f19_src_rdy_i), .dst_rdy_o(rx_f19_dst_rdy_o),
+ .dataout(rx_int1_data), .src_rdy_o(rx_int1_src_rdy), .dst_rdy_i(rx_int1_dst_rdy) );
+`else
+ fifo19_rxrealign fifo19_rxrealign
+ (.clk(clk), .reset(reset), .clear(clear),
+ .datain(rx_f19_data), .src_rdy_i(rx_f19_src_rdy_i), .dst_rdy_o(rx_f19_dst_rdy_o),
+ .dataout(rx_int1_data), .src_rdy_o(rx_int1_src_rdy), .dst_rdy_i(rx_int1_dst_rdy) );
+`endif // !`ifdef USE_PROT_ENG
+
+ fifo_short #(.WIDTH(19)) shortfifo19_b
+ (.clk(clk), .reset(reset), .clear(clear),
+ .datain(rx_int1_data), .src_rdy_i(rx_int1_src_rdy), .dst_rdy_o(rx_int1_dst_rdy),
+ .dataout(rx_int2_data), .src_rdy_o(rx_int2_src_rdy), .dst_rdy_i(rx_int2_dst_rdy),
+ .space(), .occupied() );
+
+ fifo19_to_fifo36 fifo19_to_fifo36
+ (.clk(clk), .reset(reset), .clear(clear),
+ .f19_datain(rx_int2_data), .f19_src_rdy_i(rx_int2_src_rdy), .f19_dst_rdy_o(rx_int2_dst_rdy),
+ .f36_dataout(rx_f36_data), .f36_src_rdy_o(rx_f36_src_rdy_o), .f36_dst_rdy_i(rx_f36_dst_rdy_i),
+ .debug(debug_state));
+
+ /*
+ fifo_cascade #(.WIDTH(36),.SIZE(RXFIFOSIZE)) eth0_rxfifo
+ (.clk(clk), .reset(reset), .clear(clear),
+ .datain(rx_int3_data), .src_rdy_i(rx_int3_src_rdy), .dst_rdy_o(rx_int3_dst_rdy),
+ .dataout(rx_f36_data), .src_rdy_o(rx_f36_src_rdy_o), .dst_rdy_i(rx_f36_dst_rdy_i),
+ .space(), .occupied() );
+*/
+ /*
+ assign debug = { { 1'b0, rx_f19_data[18:16], rx_f19_src_rdy_i, rx_f19_dst_rdy_o, rx_f36_src_rdy_o, rx_f36_dst_rdy_i },
+ { 2'b0, rx_int1_src_rdy, rx_int1_dst_rdy, rx_int2_src_rdy, rx_int2_dst_rdy, rx_int3_src_rdy, rx_int3_dst_rdy},
+ { rx_int3_data[35:32], rx_f36_data[35:32] },
+ { debug_state[1:0], rx_int1_data[18:16], rx_int2_data[18:16] } };
+ */
+
+ assign debug = { { 3'd0, tx_int1_src_rdy, tx_int1_dst_rdy, tx_int1_data[18:16] },
+ { 3'd0, tx_int2_src_rdy, tx_int2_dst_rdy, tx_int2_data[18:16] },
+ { tx_int2_data[15:8] },
+ { tx_int2_data[7:0] } };
+
+endmodule // udp_wrapper
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 18:58:20 +0000