diff options
Diffstat (limited to 'fpga/usrp2/top/u2_rev3_iad')
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/.gitignore | 4 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/Makefile | 253 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/cmdfile | 4 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/dsp_core_rx.v | 158 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.sav | 61 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.v | 196 | ||||
| -rw-r--r-- | fpga/usrp2/top/u2_rev3_iad/impulse.v | 63 | ||||
| -rwxr-xr-x | fpga/usrp2/top/u2_rev3_iad/wave.sh | 3 |
8 files changed, 742 insertions, 0 deletions
diff --git a/fpga/usrp2/top/u2_rev3_iad/.gitignore b/fpga/usrp2/top/u2_rev3_iad/.gitignore new file mode 100644 index 000000000..e4daaf1ea --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/.gitignore @@ -0,0 +1,4 @@ +/build +/*.vcd +/dsp_core_tb +/*.dat diff --git a/fpga/usrp2/top/u2_rev3_iad/Makefile b/fpga/usrp2/top/u2_rev3_iad/Makefile new file mode 100644 index 000000000..15df9e43e --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/Makefile @@ -0,0 +1,253 @@ +# +# Copyright 2008 Ettus Research LLC +# +# This file is part of GNU Radio +# +# GNU Radio is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GNU Radio is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Radio; see the file COPYING. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, +# Boston, MA 02110-1301, USA. +# + +################################################## +# xtclsh Shell and tcl Script Path +################################################## +#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh +XTCLSH := xtclsh +ISE_HELPER := ../tcl/ise_helper.tcl + +################################################## +# Project Setup +################################################## +BUILD_DIR := build/ +export TOP_MODULE := u2_rev3 +export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family Spartan3 \ +device xc3s2000 \ +package fg456 \ +speed -5 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +export SOURCE_ROOT := ../../../ +export SOURCES := \ +control_lib/CRC16_D16.v \ +control_lib/atr_controller.v \ +control_lib/bin2gray.v \ +control_lib/buffer_int.v \ +control_lib/buffer_pool.v \ +control_lib/cascadefifo2.v \ +control_lib/dcache.v \ +control_lib/decoder_3_8.v \ +control_lib/dpram32.v \ +control_lib/fifo_2clock.v \ +control_lib/fifo_2clock_casc.v \ +control_lib/gray2bin.v \ +control_lib/gray_send.v \ +control_lib/icache.v \ +control_lib/longfifo.v \ +control_lib/mux4.v \ +control_lib/mux8.v \ +control_lib/nsgpio.v \ +control_lib/ram_2port.v \ +control_lib/ram_harv_cache.v \ +control_lib/ram_loader.v \ +control_lib/setting_reg.v \ +control_lib/settings_bus.v \ +control_lib/shortfifo.v \ +control_lib/medfifo.v \ +control_lib/srl.v \ +control_lib/system_control.v \ +control_lib/wb_1master.v \ +control_lib/wb_readback_mux.v \ +control_lib/simple_uart.v \ +control_lib/simple_uart_tx.v \ +control_lib/simple_uart_rx.v \ +control_lib/oneshot_2clk.v \ +control_lib/sd_spi.v \ +control_lib/sd_spi_wb.v \ +control_lib/wb_bridge_16_32.v \ +coregen/fifo_xlnx_2Kx36_2clk.v \ +coregen/fifo_xlnx_2Kx36_2clk.xco \ +coregen/fifo_xlnx_512x36_2clk.v \ +coregen/fifo_xlnx_512x36_2clk.xco \ +eth/mac_rxfifo_int.v \ +eth/mac_txfifo_int.v \ +eth/rtl/verilog/Clk_ctrl.v \ +eth/rtl/verilog/MAC_rx.v \ +eth/rtl/verilog/MAC_rx/Broadcast_filter.v \ +eth/rtl/verilog/MAC_rx/CRC_chk.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_FF.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_add_chk.v \ +eth/rtl/verilog/MAC_rx/MAC_rx_ctrl.v \ +eth/rtl/verilog/MAC_top.v \ +eth/rtl/verilog/MAC_tx.v \ +eth/rtl/verilog/MAC_tx/CRC_gen.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_FF.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_addr_add.v \ +eth/rtl/verilog/MAC_tx/MAC_tx_ctrl.v \ +eth/rtl/verilog/MAC_tx/Random_gen.v \ +eth/rtl/verilog/Phy_int.v \ +eth/rtl/verilog/RMON.v \ +eth/rtl/verilog/RMON/RMON_addr_gen.v \ +eth/rtl/verilog/RMON/RMON_ctrl.v \ +eth/rtl/verilog/Reg_int.v \ +eth/rtl/verilog/eth_miim.v \ +eth/rtl/verilog/flow_ctrl_rx.v \ +eth/rtl/verilog/flow_ctrl_tx.v \ +eth/rtl/verilog/miim/eth_clockgen.v \ +eth/rtl/verilog/miim/eth_outputcontrol.v \ +eth/rtl/verilog/miim/eth_shiftreg.v \ +opencores/8b10b/decode_8b10b.v \ +opencores/8b10b/encode_8b10b.v \ +opencores/aemb/rtl/verilog/aeMB_bpcu.v \ +opencores/aemb/rtl/verilog/aeMB_core_BE.v \ +opencores/aemb/rtl/verilog/aeMB_ctrl.v \ +opencores/aemb/rtl/verilog/aeMB_edk32.v \ +opencores/aemb/rtl/verilog/aeMB_ibuf.v \ +opencores/aemb/rtl/verilog/aeMB_regf.v \ +opencores/aemb/rtl/verilog/aeMB_xecu.v \ +opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \ +opencores/i2c/rtl/verilog/i2c_master_defines.v \ +opencores/i2c/rtl/verilog/i2c_master_top.v \ +opencores/i2c/rtl/verilog/timescale.v \ +opencores/simple_pic/rtl/simple_pic.v \ +opencores/spi/rtl/verilog/spi_clgen.v \ +opencores/spi/rtl/verilog/spi_defines.v \ +opencores/spi/rtl/verilog/spi_shift.v \ +opencores/spi/rtl/verilog/spi_top.v \ +opencores/spi/rtl/verilog/timescale.v \ +sdr_lib/acc.v \ +sdr_lib/add2.v \ +sdr_lib/add2_and_round.v \ +sdr_lib/add2_and_round_reg.v \ +sdr_lib/add2_reg.v \ +sdr_lib/cic_dec_shifter.v \ +sdr_lib/cic_decim.v \ +sdr_lib/cic_int_shifter.v \ +sdr_lib/cic_interp.v \ +sdr_lib/cic_strober.v \ +sdr_lib/clip.v \ +sdr_lib/clip_reg.v \ +sdr_lib/cordic.v \ +sdr_lib/cordic_z24.v \ +sdr_lib/cordic_stage.v \ +sdr_lib/dsp_core_tx.v \ +sdr_lib/hb_dec.v \ +sdr_lib/hb_interp.v \ +sdr_lib/integrate.v \ +sdr_lib/round.v \ +sdr_lib/round_reg.v \ +sdr_lib/rx_control.v \ +sdr_lib/rx_dcoffset.v \ +sdr_lib/sign_extend.v \ +sdr_lib/small_hb_dec.v \ +sdr_lib/small_hb_int.v \ +sdr_lib/tx_control.v \ +serdes/serdes.v \ +serdes/serdes_fc_rx.v \ +serdes/serdes_fc_tx.v \ +serdes/serdes_rx.v \ +serdes/serdes_tx.v \ +timing/time_receiver.v \ +timing/time_sender.v \ +timing/time_sync.v \ +timing/timer.v \ +top/u2_core/u2_core.v \ +top/u2_rev3/u2_rev3.ucf \ +top/u2_rev3/u2_rev3.v \ +top/u2_rev3_iad/dsp_core_rx.v + +################################################## +# Process Properties +################################################## +export SYNTHESIZE_PROPERTIES := \ +"Number of Clock Buffers" 6 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +export TRANSLATE_PROPERTIES := \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +export MAP_PROPERTIES := \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +export PLACE_ROUTE_PROPERTIES := \ +"Place & Route Effort Level (Overall)" High + +export STATIC_TIMING_PROPERTIES := \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +export GEN_PROG_FILE_PROPERTIES := \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 + +export SIM_MODEL_PROPERTIES := "" + +################################################## +# Make Options +################################################## +all: + @echo make proj, check, synth, bin, testbench, or clean + +proj: + PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER) + +check: + PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER) + +synth: + PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER) + +bin: + PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER) + +testbench: + iverilog -c cmdfile -o dsp_core_tb dsp_core_tb.v + +clean: + rm -rf $(BUILD_DIR) + rm -f dsp_core_tb + rm -f *.lx2 + rm -f *.dat + rm -f *.vcd diff --git a/fpga/usrp2/top/u2_rev3_iad/cmdfile b/fpga/usrp2/top/u2_rev3_iad/cmdfile new file mode 100644 index 000000000..34373a676 --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/cmdfile @@ -0,0 +1,4 @@ +-y . +-y ../../sdr_lib +-y ../../control_lib +-y ../../models diff --git a/fpga/usrp2/top/u2_rev3_iad/dsp_core_rx.v b/fpga/usrp2/top/u2_rev3_iad/dsp_core_rx.v new file mode 100644 index 000000000..2882464ba --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/dsp_core_rx.v @@ -0,0 +1,158 @@ +`define DSP_CORE_RX_BASE 160 +module dsp_core_rx + (input clk, input rst, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + + input [13:0] adc_a, input adc_ovf_a, + input [13:0] adc_b, input adc_ovf_b, + + input [15:0] io_rx, + + output [31:0] sample, + input run, + output strobe, + output [31:0] debug + ); + + wire [15:0] scale_i, scale_q; + wire [13:0] adc_a_ofs, adc_b_ofs; + reg [13:0] adc_i, adc_q; + wire [31:0] phase_inc; + reg [31:0] phase; + + wire [35:0] prod_i, prod_q; + wire [23:0] i_cordic, q_cordic; + wire [31:0] i_iad, q_iad; + wire [15:0] i_out, q_out; + + wire enable_hb1, enable_hb2; // Correspond to std firmware settings + wire [7:0] cic_decim; // for combined CIC/HB decimator + wire [9:0] decim_rate; // Reconstructed original decimation setting + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(phase_inc),.changed()); + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({scale_i,scale_q}),.changed()); + + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out({enable_hb1,enable_hb2,cic_decim}),.changed()); + + rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+6)) rx_dcoffset_a + (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_in(adc_a),.adc_out(adc_a_ofs)); + + rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+7)) rx_dcoffset_b + (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_in(adc_b),.adc_out(adc_b_ofs)); + + wire [3:0] muxctrl; + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+8)) sr_8 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(muxctrl),.changed()); + + wire [1:0] gpio_ena; + setting_reg #(.my_addr(`DSP_CORE_RX_BASE+9)) sr_9 + (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(gpio_ena),.changed()); + + // The TVRX connects to what is called adc_b, thus A and B are + // swapped throughout the design. + // + // In the interest of expediency and keeping the s/w sane, we just remap them here. + // The I & Q fields are mapped the same: + // 0 -> "the real A" (as determined by the TVRX) + // 1 -> "the real B" + // 2 -> const zero + + always @(posedge clk) + case(muxctrl[1:0]) // The I mapping + 0: adc_i <= adc_b_ofs; // "the real A" + 1: adc_i <= adc_a_ofs; + 2: adc_i <= 0; + default: adc_i <= 0; + endcase // case(muxctrl[1:0]) + + always @(posedge clk) + case(muxctrl[3:2]) // The Q mapping + 0: adc_q <= adc_b_ofs; // "the real A" + 1: adc_q <= adc_a_ofs; + 2: adc_q <= 0; + default: adc_q <= 0; + endcase // case(muxctrl[3:2]) + + always @(posedge clk) + if(rst) + phase <= 0; + else if(~run) + phase <= 0; + else + phase <= phase + phase_inc; + + MULT18X18S mult_i + (.P(prod_i), // 36-bit multiplier output + .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input + .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input + .C(clk), // Clock input + .CE(1), // Clock enable input + .R(rst) // Synchronous reset input + ); + + MULT18X18S mult_q + (.P(prod_q), // 36-bit multiplier output + .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input + .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input + .C(clk), // Clock input + .CE(1), // Clock enable input + .R(rst) // Synchronous reset input + ); + + + cordic_z24 #(.bitwidth(24)) + cordic(.clock(clk), .reset(rst), .enable(run), + .xi(prod_i[24:1]),. yi(prod_q[24:1]), .zi(phase[31:8]), + .xo(i_cordic),.yo(q_cordic),.zo() ); + + // Reconstruct original decimation rate from standard firmware settings + assign decim_rate = enable_hb2 ? (enable_hb1 ? {cic_decim,2'b0} : + {1'b0,cic_decim,1'b0 }) : + cic_decim; + + cic_strober #(.WIDTH(10)) // Convenient reuse of strobe generator + cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(decim_rate), + .strobe_fast(1),.strobe_slow(strobe_iad) ); + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_i + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(i_cordic), + .stb_o(strobe),.integ_o(i_iad) ); + + integrate #(.INPUTW(24),.ACCUMW(32),.OUTPUTW(32)) integrator_q + (.clk_i(clk),.rst_i(rst),.ena_i(run), + .dump_i(strobe_iad),.data_i(q_cordic), + .stb_o(),.integ_o(q_iad) ); + + round #(.bits_in(32),.bits_out(16)) round_iout (.in(i_iad),.out(i_out)); + round #(.bits_in(32),.bits_out(16)) round_qout (.in(q_iad),.out(q_out)); + + // Streaming GPIO + // + // io_rx[15] => I channel LSB if gpio_ena[0] high + // io_rx[14] => Q channel LSB if gpio_ena[1] high + + reg [31:0] sample_reg; + always @(posedge clk) + begin + sample_reg[31:17] <= i_out[15:1]; + sample_reg[15:1] <= q_out[15:1]; + sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0]; + sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0]; + end + + assign sample = sample_reg; + assign debug = {clk, rst, run, strobe}; + +endmodule // dsp_core_rx diff --git a/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.sav b/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.sav new file mode 100644 index 000000000..17c90cdd7 --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.sav @@ -0,0 +1,61 @@ +[size] 1680 975 +[pos] -1 -1 +*-24.007835 13660000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 +[treeopen] dsp_core_tb. +@200 +-SYSCON +@28 +dsp_core_tb.clk +dsp_core_tb.rst +dsp_core_tb.run +@200 +- +-Settings Bus +@22 +dsp_core_tb.set_addr[7:0] +@24 +dsp_core_tb.set_data[31:0] +@28 +dsp_core_tb.set_stb +@200 +- +-RX DSP CORE +- +@24 +dsp_core_tb.rx_path.decim_rate[9:0] +@200 +- +@8420 +dsp_core_tb.adc_a[13:0] +@20000 +- +@200 +- +@8420 +dsp_core_tb.rx_path.adc_a_ofs[13:0] +@20000 +- +@200 +- +@8022 +dsp_core_tb.rx_path.i_cordic[23:0] +@20000 +- +@200 +- +@8022 +dsp_core_tb.rx_path.i_iad[31:0] +@20000 +- +@200 +- +@8420 +dsp_core_tb.rx_path.i_out[15:0] +@20000 +- +@200 +- +@28 +dsp_core_tb.stb +@200 +- diff --git a/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.v b/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.v new file mode 100644 index 000000000..4d5a5b537 --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/dsp_core_tb.v @@ -0,0 +1,196 @@ +`timescale 1ns / 100ps + +module dsp_core_tb; + +/////////////////////////////////////////////////////////////////////////////////// +// Sim-wide wires/busses // +/////////////////////////////////////////////////////////////////////////////////// + + // System control bus + reg clk = 0; + reg rst = 1; + + // Configuration bus + reg set_stb = 0; + reg [7:0] set_addr = 0; + reg [31:0] set_data = 0; + + // ADC input bus + wire signed [13:0] adc_a; + wire signed [13:0] adc_b; + wire adc_ovf_a; + wire adc_ovf_b; + + // RX sample bus + reg run = 1; + wire [31:0] sample; + wire stb; + +/////////////////////////////////////////////////////////////////////////////////// +// Simulation control // +/////////////////////////////////////////////////////////////////////////////////// + + // Set up output files + initial begin + $dumpfile("dsp_core_tb.vcd"); + $dumpvars(0,dsp_core_tb); + end + + // Update display every 10 us + always #1000 $monitor("Time in us ",$time/1000); + + // Generate master clock 50% @ 100 MHz + always + #5 clk = ~clk; + +/////////////////////////////////////////////////////////////////////////////////// +// Unit(s) under test // +/////////////////////////////////////////////////////////////////////////////////// + + reg [13:0] amplitude = 13'h1fff; + reg [15:0] impulse_len = 0; + reg [15:0] zero_len = 0; + reg adc_ena = 0; + + initial #500 @(posedge clk) adc_ena = 1; + + impulse adc + (.clk(clk),.rst(rst),.ena(adc_ena), + .dc_offset_a(0),.dc_offset_b(0), + .amplitude(amplitude), + .impulse_len(impulse_len),.zero_len(zero_len), + .adc_a(adc_a),.adc_b(adc_b), + .adc_ovf_a(adc_ovf_a),.adc_ovf_b(adc_ovf_b) ); + + initial rx_path.rx_dcoffset_a.integrator = 0; // so sim doesn't propagate X's + initial rx_path.rx_dcoffset_b.integrator = 0; // generated before reset + dsp_core_rx rx_path + (.clk(clk),.rst(rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a(adc_a),.adc_ovf_a(adc_ovf_a), + .adc_b(adc_b),.adc_ovf_b(adc_ovf_b), + .io_rx(16'b0), + .run(adc_ena),.sample(sample),.strobe(stb), + .debug() ); + +/////////////////////////////////////////////////////////////////////////////////// +// Simulation output/checking // +/////////////////////////////////////////////////////////////////////////////////// + + integer rx_file; + + initial + rx_file = $fopen("rx.dat", "wb"); + + always @(posedge clk) + begin + // Write RX sample I&Q in format Octave can load + if (stb) + begin + $fwrite(rx_file, sample[31:16]); + $fputc(32, rx_file); + $fwrite(rx_file, sample[15:0]); + $fputc(13, rx_file); + end + end + +/////////////////////////////////////////////////////////////////////////////////// +// Tasks // +/////////////////////////////////////////////////////////////////////////////////// + + task power_on; + begin + @(posedge clk) + rst = #1 1'b1; + @(posedge clk) + rst = #1 1'b0; + end + endtask // power_on + + task set_impulse_len; + input [15:0] len; + @(posedge clk) impulse_len = len-1; + endtask + + task set_zero_len; + input [15:0] len; + @(posedge clk) zero_len = len-1; + endtask + + // Strobe configuration bus with addr, data + task write_cfg_register; + input [7:0] regno; + input [31:0] value; + + begin + @(posedge clk); + set_addr <= regno; + set_data <= value; + set_stb <= 1'b1; + @(posedge clk); + set_stb <= 1'b0; + end + endtask // write_cfg_register + + // Set RX DDC frequency + task set_ddc_freq; + input [31:0] freq; + + write_cfg_register(160, freq); + endtask // set_ddc_freq + + // Set RX IQ scaling registers + task set_rx_scale_iq; + input [15:0] scale_i; + input [15:0] scale_q; + + write_cfg_register(161, {scale_i,scale_q}); + endtask // set_rx_scale_iq + + // Set RX MUX control + task set_rx_muxctrl; + input [3:0] muxctrl; + + write_cfg_register(168, muxctrl); + endtask // set_rx_muxctrl + + // Set RX CIC decim and halfband enables + task set_decim; + input hb1_ena; + input hb2_ena; + input [7:0] decim; + + write_cfg_register(162, {hb1_ena,hb2_ena,decim}); + endtask // set_decim + + +/////////////////////////////////////////////////////////////////////////////////// +// Individual tests // +/////////////////////////////////////////////////////////////////////////////////// + + task test_rx; + begin + set_impulse_len(1); + set_zero_len(999); + set_rx_muxctrl(1); + set_ddc_freq(0); + set_rx_scale_iq(1243, 1243); + set_decim(0, 1, 3); + + #100000 $finish; + end + endtask // test_rx + + +/////////////////////////////////////////////////////////////////////////////////// +// Top-level test // +/////////////////////////////////////////////////////////////////////////////////// + + // Execute tests + initial + begin + power_on(); + test_rx(); + end + +endmodule // dsp_core_tb diff --git a/fpga/usrp2/top/u2_rev3_iad/impulse.v b/fpga/usrp2/top/u2_rev3_iad/impulse.v new file mode 100644 index 000000000..7f0cdc9be --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/impulse.v @@ -0,0 +1,63 @@ +module impulse + (input clk, + input rst, + input ena, + + input [13:0] dc_offset_a, + input [13:0] dc_offset_b, + input [13:0] amplitude, + input [15:0] impulse_len, + input [15:0] zero_len, + + output [13:0] adc_a, + output [13:0] adc_b, + output adc_ovf_a, + output adc_ovf_b + ); + + reg [13:0] adc_a_int = 0; + reg [15:0] count; + + localparam ST_ZERO = 0; + localparam ST_HIGH = 1; + reg state; + + always @(posedge clk) + if (rst | ~ena) + begin + adc_a_int <= 0; + count <= 0; + state <= ST_ZERO; + end + else + case(state) + ST_ZERO: + if (count == zero_len) + begin + adc_a_int <= amplitude; + state <= ST_HIGH; + count <= 0; + end + else + count <= count + 1; + + ST_HIGH: + if (count == impulse_len) + begin + adc_a_int <= 0; + state <= ST_ZERO; + count <= 0; + end + else + count <= count + 1; + + endcase // case (state) + + assign adc_a = adc_a_int + dc_offset_a; + + // Ignore for now + assign adc_b = dc_offset_b; + assign adc_ovf_a = 0; + assign adc_ovf_b = 0; + +endmodule // impulse diff --git a/fpga/usrp2/top/u2_rev3_iad/wave.sh b/fpga/usrp2/top/u2_rev3_iad/wave.sh new file mode 100755 index 000000000..626f224e5 --- /dev/null +++ b/fpga/usrp2/top/u2_rev3_iad/wave.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +gtkwave dsp_core_tb.vcd dsp_core_tb.sav & |