diff options
Diffstat (limited to 'fpga/usrp2/top/E1x0')
| -rw-r--r-- | fpga/usrp2/top/E1x0/.gitignore | 6 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/E1x0.ucf | 261 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/E1x0.v | 215 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/Makefile | 17 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/Makefile.E100 | 106 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/Makefile.E110 | 105 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/README | 4 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/cmdfile | 20 | ||||
| -rwxr-xr-x | fpga/usrp2/top/E1x0/core_compile | 3 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/make.sim | 7 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/tb_u1e.v | 58 | ||||
| -rw-r--r-- | fpga/usrp2/top/E1x0/timing.ucf | 23 |
12 files changed, 825 insertions, 0 deletions
diff --git a/fpga/usrp2/top/E1x0/.gitignore b/fpga/usrp2/top/E1x0/.gitignore new file mode 100644 index 000000000..8d872713e --- /dev/null +++ b/fpga/usrp2/top/E1x0/.gitignore @@ -0,0 +1,6 @@ +*~ +build +*.log +*.cmd +tb_u1e +*.lxt diff --git a/fpga/usrp2/top/E1x0/E1x0.ucf b/fpga/usrp2/top/E1x0/E1x0.ucf new file mode 100644 index 000000000..278fc289a --- /dev/null +++ b/fpga/usrp2/top/E1x0/E1x0.ucf @@ -0,0 +1,261 @@ + +NET "CLK_FPGA_P" LOC = "Y11" ; +NET "CLK_FPGA_N" LOC = "Y10" ; + +## GPMC +NET "EM_D<15>" LOC = "D13" ; +NET "EM_D<14>" LOC = "D15" ; +NET "EM_D<13>" LOC = "C16" ; +NET "EM_D<12>" LOC = "B20" ; +NET "EM_D<11>" LOC = "A19" ; +NET "EM_D<10>" LOC = "A17" ; +NET "EM_D<9>" LOC = "E15" ; +NET "EM_D<8>" LOC = "F15" ; +NET "EM_D<7>" LOC = "E16" ; +NET "EM_D<6>" LOC = "F16" ; +NET "EM_D<5>" LOC = "B17" ; +NET "EM_D<4>" LOC = "C17" ; +NET "EM_D<3>" LOC = "B19" ; +NET "EM_D<2>" LOC = "D19" ; +NET "EM_D<1>" LOC = "C19" ; +NET "EM_D<0>" LOC = "A20" ; + +NET "EM_A<10>" LOC = "C14" ; +NET "EM_A<9>" LOC = "C10" ; +NET "EM_A<8>" LOC = "C5" ; +NET "EM_A<7>" LOC = "A18" ; +NET "EM_A<6>" LOC = "A15" ; +NET "EM_A<5>" LOC = "A12" ; +NET "EM_A<4>" LOC = "A10" ; +NET "EM_A<3>" LOC = "E7" ; +NET "EM_A<2>" LOC = "A7" ; +NET "EM_A<1>" LOC = "C15" ; + +NET "EM_NCS6" LOC = "E17" ; +NET "EM_NCS5" LOC = "E10" ; +NET "EM_NCS4" LOC = "E6" ; +#NET "EM_NCS1" LOC = "D18" ; +#NET "EM_NCS0" LOC = "D17" ; + +NET "EM_CLK" LOC = "F11" ; +NET "EM_WAIT0" LOC = "F14" ; +NET "EM_NBE<1>" LOC = "D14" ; +NET "EM_NBE<0>" LOC = "A13" ; +NET "EM_NWE" LOC = "B13" ; +NET "EM_NOE" LOC = "A14" ; +#NET "EM_NADV_ALE" LOC = "B15" ; +#NET "EM_NWP" LOC = "F13" ; + +## Overo GPIO +NET "overo_gpio0" LOC = "F9" ; # MISC GPIO for debug +NET "overo_gpio14" LOC = "C4" ; # MISC GPIO for debug +NET "overo_gpio21" LOC = "D5" ; # MISC GPIO for debug +NET "overo_gpio22" LOC = "A3" ; # MISC GPIO for debug +NET "overo_gpio23" LOC = "B3" ; # MISC GPIO for debug +NET "overo_gpio64" LOC = "A4" ; # MISC GPIO for debug +NET "overo_gpio65" LOC = "F8" ; # MISC GPIO for debug + +NET "overo_gpio127" LOC = "C8" ; # Changed name to gpio10 +NET "overo_gpio128" LOC = "G8" ; # Changed name to gpio186 + +NET "overo_gpio144" LOC = "A5" ; # tx_have_space +NET "overo_gpio145" LOC = "C7" ; # tx_underrun +NET "overo_gpio146" LOC = "A6" ; # rx_have_data +NET "overo_gpio147" LOC = "B6" ; # rx_overrun +NET "overo_gpio163" LOC = "D7" ; # MISC GPIO for debug +NET "overo_gpio170" LOC = "E8" ; # MISC GPIO for debug +NET "overo_gpio176" LOC = "B4" ; # MISC GPIO for debug + +## Overo UART +NET "overo_txd1" LOC = "C6" ; +NET "overo_rxd1" LOC = "D6" ; +NET "fpga_txd1" LOC = "AB9" ; +NET "fpga_rxd1" LOC = "AB8" ; + +## FTDI UART to USB converter +NET "FPGA_TXD" LOC = "G19" ; +NET "FPGA_RXD" LOC = "F20" ; + +#NET "SYSEN" LOC = "C11" ; + +## I2C +NET "db_scl" LOC = "F19" ; +NET "db_sda" LOC = "F18" ; + +## SPI +### DBoard SPI +NET "db_sclk_rx" LOC = "D21" ; +NET "db_miso_rx" LOC = "D22" ; +NET "db_mosi_rx" LOC = "D20" ; +NET "db_sen_rx" LOC = "E19" ; +NET "db_sclk_tx" LOC = "F21" ; +NET "db_miso_tx" LOC = "E20" ; +NET "db_mosi_tx" LOC = "G17" ; +NET "db_sen_tx" LOC = "G18" ; + +### AD9862 SPI and aux SPI Interfaces +#NET "aux_sdi_codec" LOC = "G3" ; +#NET "aux_sdo_codec" LOC = "F3" ; +#NET "aux_sclk_codec" LOC = "C1" ; +NET "sen_codec" LOC = "F5" |IOSTANDARD = LVCMOS33; +NET "mosi_codec" LOC = "F4" |IOSTANDARD = LVCMOS33; +NET "miso_codec" LOC = "H4" ; +NET "sclk_codec" LOC = "H3" |IOSTANDARD = LVCMOS33; + +### Clock Gen SPI +NET "cgen_miso" LOC = "F22" ; +NET "cgen_mosi" LOC = "E22" ; +NET "cgen_sclk" LOC = "J19" ; +NET "cgen_sen_b" LOC = "H20" ; + +## Clock gen control +NET "cgen_st_status" LOC = "P20" ; +NET "cgen_st_ld" LOC = "R17" ; +NET "cgen_st_refmon" LOC = "P17" ; +NET "cgen_sync_b" LOC = "U18" ; +NET "cgen_ref_sel" LOC = "U19" ; + +## Debug pins +NET "debug_led<3>" LOC = "Y15" ; +NET "debug_led<2>" LOC = "K16" ; +NET "debug_led<1>" LOC = "J17" ; +NET "debug_led<0>" LOC = "H22" ; +NET "debug<0>" LOC = "G22" ; +NET "debug<1>" LOC = "H17" ; +NET "debug<2>" LOC = "H18" ; +NET "debug<3>" LOC = "K20" ; +NET "debug<4>" LOC = "J20" ; +NET "debug<5>" LOC = "K19" ; +NET "debug<6>" LOC = "K18" ; +NET "debug<7>" LOC = "L22" ; +NET "debug<8>" LOC = "K22" ; +NET "debug<9>" LOC = "N22" ; +NET "debug<10>" LOC = "M22" ; +NET "debug<11>" LOC = "N20" ; +NET "debug<12>" LOC = "N19" ; +NET "debug<13>" LOC = "R22" ; +NET "debug<14>" LOC = "P22" ; +NET "debug<15>" LOC = "N17" ; +NET "debug<16>" LOC = "P16" ; +NET "debug<17>" LOC = "U22" ; +NET "debug<18>" LOC = "P19" ; +NET "debug<19>" LOC = "R18" ; +NET "debug<20>" LOC = "U20" ; +NET "debug<21>" LOC = "T20" ; +NET "debug<22>" LOC = "R19" ; +NET "debug<23>" LOC = "R20" ; +NET "debug<24>" LOC = "W22" ; +NET "debug<25>" LOC = "Y22" ; +NET "debug<26>" LOC = "T18" ; +NET "debug<27>" LOC = "T17" ; +NET "debug<28>" LOC = "W19" ; +NET "debug<29>" LOC = "V20" ; +NET "debug<30>" LOC = "Y21" ; +NET "debug<31>" LOC = "AA22" ; +NET "debug_clk<0>" LOC = "N18" ; +NET "debug_clk<1>" LOC = "M17" ; + +NET "debug_pb" LOC = "C22" ; + +#NET "reset_codec" LOC = "C2" ; + +NET "RXSYNC" LOC = "F2" ; +NET "DB<11>" LOC = "G6" ; +NET "DB<10>" LOC = "G5" ; +NET "DB<9>" LOC = "E4" ; +NET "DB<8>" LOC = "E3" ; +NET "DB<7>" LOC = "H6" ; +NET "DB<6>" LOC = "H5" ; +NET "DB<5>" LOC = "H1" ; +NET "DB<4>" LOC = "G1" ; +NET "DB<3>" LOC = "K5" ; +NET "DB<2>" LOC = "K4" ; +NET "DB<1>" LOC = "H2" ; +NET "DB<0>" LOC = "L5" ; + +NET "DA<11>" LOC = "K6" ; +NET "DA<10>" LOC = "K3" ; +NET "DA<9>" LOC = "K2" ; +NET "DA<8>" LOC = "N1" ; +NET "DA<7>" LOC = "N5" ; +NET "DA<6>" LOC = "N6" ; +NET "DA<5>" LOC = "P2" ; +NET "DA<4>" LOC = "P1" ; +NET "DA<3>" LOC = "R6" ; +NET "DA<2>" LOC = "P6" ; +NET "DA<1>" LOC = "R1" ; +NET "DA<0>" LOC = "R2" ; + +NET "TX<13>" LOC = "T6" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<12>" LOC = "U1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<11>" LOC = "T1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<10>" LOC = "R5" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<9>" LOC = "V1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<8>" LOC = "U2" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<7>" LOC = "T4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<6>" LOC = "R3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<5>" LOC = "W1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<4>" LOC = "Y1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<3>" LOC = "V3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<2>" LOC = "V4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<1>" LOC = "W2" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TX<0>" LOC = "W3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TXSYNC" LOC = "U5" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; +NET "TXBLANK" LOC = "U4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ; + +NET "PPS_IN" LOC = "M5" ; + +NET "io_tx<0>" LOC = "AB20" ; +NET "io_tx<1>" LOC = "Y17" ; +NET "io_tx<2>" LOC = "Y16" ; +NET "io_tx<3>" LOC = "U16" ; +NET "io_tx<4>" LOC = "V16" ; +NET "io_tx<5>" LOC = "AB19" ; +NET "io_tx<6>" LOC = "AA19" ; +NET "io_tx<7>" LOC = "U14" ; +NET "io_tx<8>" LOC = "U15" ; +NET "io_tx<9>" LOC = "AB17" ; +NET "io_tx<10>" LOC = "AB18" ; +NET "io_tx<11>" LOC = "Y13" ; +NET "io_tx<12>" LOC = "W14" ; +NET "io_tx<13>" LOC = "U13" ; +NET "io_tx<14>" LOC = "AA15" ; +NET "io_tx<15>" LOC = "AB14" ; + +NET "io_rx<0>" LOC = "Y8" ; +NET "io_rx<1>" LOC = "Y9" ; +NET "io_rx<2>" LOC = "V7" ; +NET "io_rx<3>" LOC = "U8" ; +NET "io_rx<4>" LOC = "V10" ; +NET "io_rx<5>" LOC = "U9" ; +NET "io_rx<6>" LOC = "AB7" ; +NET "io_rx<7>" LOC = "AA8" ; +NET "io_rx<8>" LOC = "W8" ; +NET "io_rx<9>" LOC = "V8" ; +NET "io_rx<10>" LOC = "AB5" ; +NET "io_rx<11>" LOC = "AB6" ; +NET "io_rx<12>" LOC = "AB4" ; +NET "io_rx<13>" LOC = "AA4" ; +NET "io_rx<14>" LOC = "W5" ; +NET "io_rx<15>" LOC = "Y4" ; + +#NET "CLKOUT2_CODEC" LOC = "U12" ; +#NET "CLKOUT1_CODEC" LOC = "V12" ; + +## FPGA Config Pins +#NET "fpga_cfg_prog_b" LOC = "A2" ; +#NET "fpga_cfg_done" LOC = "AB21" ; +#NET "fpga_cfg_din" LOC = "W17" ; +#NET "fpga_cfg_cclk" LOC = "V17" ; +#NET "fpga_cfg_init_b" LOC = "W15" ; + +## Unused +#NET "unnamed_net53" LOC = "B1" ; # TMS +#NET "unnamed_net52" LOC = "B22" ; # TDO +#NET "unnamed_net51" LOC = "D2" ; # TDI +#NET "unnamed_net50" LOC = "A21" ; # TCK +#NET "unnamed_net59" LOC = "F7" ; # PUDC_B +#NET "unnamed_net58" LOC = "V6" ; # M2 +#NET "unnamed_net57" LOC = "AA3" ; # M1 +#NET "unnamed_net56" LOC = "AB3" ; # M0 +#NET "GND" LOC = "V19" ; # Suspend, unused diff --git a/fpga/usrp2/top/E1x0/E1x0.v b/fpga/usrp2/top/E1x0/E1x0.v new file mode 100644 index 000000000..44129ce92 --- /dev/null +++ b/fpga/usrp2/top/E1x0/E1x0.v @@ -0,0 +1,215 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module E1x0 + (input CLK_FPGA_P, input CLK_FPGA_N, // Diff + output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + input debug_pb, output FPGA_TXD, input FPGA_RXD, + output fpga_txd1, input fpga_rxd1, input overo_txd1, output overo_rxd1, + + // GPMC + input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE, + input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6, + input EM_NWE, input EM_NOE, + + inout db_sda, inout db_scl, // I2C + + output db_sclk_tx, output db_sen_tx, output db_mosi_tx, input db_miso_tx, // DB TX SPI + output db_sclk_rx, output db_sen_rx, output db_mosi_rx, input db_miso_rx, // DB TX SPI + output sclk_codec, output sen_codec, output mosi_codec, input miso_codec, // AD9862 main SPI + output cgen_sclk, output cgen_sen_b, output cgen_mosi, input cgen_miso, // Clock gen SPI + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + input overo_gpio65, input overo_gpio128, input overo_gpio145, output overo_gpio147, //aux SPI + + output overo_gpio144, output overo_gpio146, // Fifo controls + input overo_gpio0, input overo_gpio14, input overo_gpio21, input overo_gpio22, // Misc GPIO + input overo_gpio23, input overo_gpio64, input overo_gpio127, // Misc GPIO + input overo_gpio176, input overo_gpio163, input overo_gpio170, // Misc GPIO + + inout [15:0] io_tx, inout [15:0] io_rx, + + output [13:0] TX, output TXSYNC, output TXBLANK, + input [11:0] DA, input [11:0] DB, input RXSYNC, + + input PPS_IN + ); + + assign FPGA_TXD = 0; //dont care + + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga; + wire reset; + + reg por_rst; + reg [7:0] por_counter = 8'h0; + + always @(posedge clk_fpga) + if (por_counter != 8'h55) + begin + por_counter <= por_counter + 8'h1; + por_rst <= 1'b1; + end + else por_rst <= 1'b0; + + wire async_reset; + cross_clock_reader #(.WIDTH(1)) read_gpio_reset + (.clk(clk_fpga), .rst(por_rst), .in(cgen_sen_b & ~cgen_sclk), .out(async_reset)); + + IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) + clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + reset_sync reset_sync(.clk(clk_fpga), .reset_in(async_reset), .reset_out(reset)); + + // ///////////////////////////////////////////////////////////////////////// + // UART level conversion + assign fpga_txd1 = overo_txd1; + assign overo_rxd1 = fpga_rxd1; + + // SPI + wire mosi, sclk, miso; + assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0; + assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0; + assign { sclk_codec, mosi_codec } = ~sen_codec ? {sclk,mosi} : 2'b0; + //assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0; //replaced by aux spi + assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) | + (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso); + + //assign the aux spi to the cgen (bypasses control fifo) + assign cgen_sclk = overo_gpio65; + assign cgen_sen_b = overo_gpio128; + assign cgen_mosi = overo_gpio145; + wire has_resp; //re-purpose gpio for interrupt when we are not using aux spi + assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : has_resp; + + wire _cgen_sen_b; + //assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; + + reg[13:0] delay_q; + always @(posedge clk_fpga) + delay_q <= tx_q; + + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(TX[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(delay_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + // ///////////////////////////////////////////////////////////////////////// + // RX ADC -- handles inversion + + reg [11:0] rx_i, rx_q; + always @(posedge clk_fpga) begin + rx_i <= ~DA; + rx_q <= ~DB; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main Core + wire [35:0] rx_data, tx_data, ctrl_data, resp_data; + wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy; + wire dsp_rx_run, dsp_tx_run; + wire [7:0] sen8; + assign {_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx} = sen8[3:0]; + wire [31:0] core_debug; + + assign debug_led = ~{PPS_IN, dsp_tx_run, dsp_rx_run, cgen_st_ld}; + wire cgen_sync; + assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1}; + + u1plus_core #( + .NUM_RX_DSPS(2), + .DSP_RX_XTRA_FIFOSIZE(10), + .DSP_TX_XTRA_FIFOSIZE(10), + .USE_PACKET_PADDER(0) + ) core( + .clk(clk_fpga), .reset(reset), + .debug(core_debug), .debug_clk(debug_clk), + + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run), + .clock_sync(cgen_sync), + + .db_sda(db_sda), .db_scl(db_scl), + .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + + // ///////////////////////////////////////////////////////////////////////// + // Interface between GPMC/host + wire [31:0] gpmc_debug; + + gpmc #(.TXFIFOSIZE(13), .RXFIFOSIZE(13)) + gpmc (.arst(async_reset), + .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE), + .EM_NOE(EM_NOE), + + .rx_have_data(overo_gpio146), .tx_have_space(overo_gpio144), + .resp_have_data(has_resp), + + .fifo_clk(clk_fpga), .fifo_rst(reset), + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .debug(gpmc_debug)); + + //assign debug = gpmc_debug; + assign debug = core_debug; + +endmodule // E1x0 diff --git a/fpga/usrp2/top/E1x0/Makefile b/fpga/usrp2/top/E1x0/Makefile new file mode 100644 index 000000000..0ca8ed2dd --- /dev/null +++ b/fpga/usrp2/top/E1x0/Makefile @@ -0,0 +1,17 @@ +# +# Copyright 2011 Ettus Research LLC +# + +all: E100 E110 + find -name "*.twr" | xargs grep constraint | grep met + +clean: + rm -rf build* + +E100: + make -f Makefile.$@ bin + +E110: + make -f Makefile.$@ bin + +.PHONY: all clean diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100 new file mode 100644 index 000000000..92334d987 --- /dev/null +++ b/fpga/usrp2/top/E1x0/Makefile.E100 @@ -0,0 +1,106 @@ +# +# Copyright 2008-2012 Ettus Research LLC +# + +################################################## +# Project Setup +################################################## +TOP_MODULE = E1x0 +BUILD_DIR = $(abspath build$(ISE)-E100) + +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + +################################################## +# Include other makefiles +################################################## + +include ../Makefile.common +include ../../fifo/Makefile.srcs +include ../../control_lib/Makefile.srcs +include ../../sdr_lib/Makefile.srcs +include ../../serdes/Makefile.srcs +include ../../simple_gemac/Makefile.srcs +include ../../timing/Makefile.srcs +include ../../opencores/Makefile.srcs +include ../../vrt/Makefile.srcs +include ../../udp/Makefile.srcs +include ../../coregen/Makefile.srcs +include ../../gpmc/Makefile.srcs + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan-3A DSP" \ +device xc3sd1800a \ +package cs484 \ +speed -4 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +TOP_SRCS = \ +../B100/u1plus_core.v \ +E1x0.v \ +E1x0.ucf \ +timing.ucf + +SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ +$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ +$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(GPMC_SRCS) + +################################################## +# Process Properties +################################################## +SYNTHESIZE_PROPERTIES = \ +"Number of Clock Buffers" 8 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_DEFS)" + +TRANSLATE_PROPERTIES = \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +MAP_PROPERTIES = \ +"Generate Detailed MAP Report" TRUE \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +PLACE_ROUTE_PROPERTIES = \ +"Place & Route Effort Level (Overall)" High + +STATIC_TIMING_PROPERTIES = \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +GEN_PROG_FILE_PROPERTIES = \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 \ +"Unused IOB Pins" "Pull Up" + +SIM_MODEL_PROPERTIES = "" diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110 new file mode 100644 index 000000000..c2d3e39e6 --- /dev/null +++ b/fpga/usrp2/top/E1x0/Makefile.E110 @@ -0,0 +1,105 @@ +# +# Copyright 2008-2012 Ettus Research LLC +# + +################################################## +# Project Setup +################################################## +TOP_MODULE = E1x0 +BUILD_DIR = $(abspath build$(ISE)-E110) + +# set me in a custom makefile +CUSTOM_SRCS = +CUSTOM_DEFS = + +################################################## +# Include other makefiles +################################################## + +include ../Makefile.common +include ../../fifo/Makefile.srcs +include ../../control_lib/Makefile.srcs +include ../../sdr_lib/Makefile.srcs +include ../../serdes/Makefile.srcs +include ../../simple_gemac/Makefile.srcs +include ../../timing/Makefile.srcs +include ../../opencores/Makefile.srcs +include ../../vrt/Makefile.srcs +include ../../udp/Makefile.srcs +include ../../coregen/Makefile.srcs +include ../../gpmc/Makefile.srcs + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan-3A DSP" \ +device xc3sd3400a \ +package cs484 \ +speed -4 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +TOP_SRCS = \ +../B100/u1plus_core.v \ +E1x0.v \ +timing.ucf + +SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ +$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ +$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(GPMC_SRCS) + +################################################## +# Process Properties +################################################## +SYNTHESIZE_PROPERTIES = \ +"Number of Clock Buffers" 8 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto \ +"Verilog Macros" "$(CUSTOM_DEFS)" + +TRANSLATE_PROPERTIES = \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +MAP_PROPERTIES = \ +"Generate Detailed MAP Report" TRUE \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +PLACE_ROUTE_PROPERTIES = \ +"Place & Route Effort Level (Overall)" High + +STATIC_TIMING_PROPERTIES = \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +GEN_PROG_FILE_PROPERTIES = \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 \ +"Unused IOB Pins" "Pull Up" + +SIM_MODEL_PROPERTIES = "" diff --git a/fpga/usrp2/top/E1x0/README b/fpga/usrp2/top/E1x0/README new file mode 100644 index 000000000..14c7a4955 --- /dev/null +++ b/fpga/usrp2/top/E1x0/README @@ -0,0 +1,4 @@ + +make clean +make sim +./tb_u1e -lxt2 diff --git a/fpga/usrp2/top/E1x0/cmdfile b/fpga/usrp2/top/E1x0/cmdfile new file mode 100644 index 000000000..291c723b8 --- /dev/null +++ b/fpga/usrp2/top/E1x0/cmdfile @@ -0,0 +1,20 @@ + +# My stuff +-y . +-y ../../control_lib +-y ../../control_lib/newfifo +-y ../../sdr_lib +-y ../../timing +-y ../../coregen +-y ../../gpmc + +# Models +-y ../../models +-y /opt/Xilinx/10.1/ISE/verilog/src/unisims + +# Open Cores +-y ../../opencores/spi/rtl/verilog ++incdir+../../opencores/spi/rtl/verilog +-y ../../opencores/i2c/rtl/verilog ++incdir+../../opencores/i2c/rtl/verilog + diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile new file mode 100755 index 000000000..ab992f29d --- /dev/null +++ b/fpga/usrp2/top/E1x0/core_compile @@ -0,0 +1,3 @@ +iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E1x0.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models + + diff --git a/fpga/usrp2/top/E1x0/make.sim b/fpga/usrp2/top/E1x0/make.sim new file mode 100644 index 000000000..1c163884c --- /dev/null +++ b/fpga/usrp2/top/E1x0/make.sim @@ -0,0 +1,7 @@ +all: sim + +sim: + iverilog -Wimplicit -Wportbind -c cmdfile tb_u1e.v -o tb_u1e + +clean: + rm -f tb_u1e *.vcd *.lxt a.out diff --git a/fpga/usrp2/top/E1x0/tb_u1e.v b/fpga/usrp2/top/E1x0/tb_u1e.v new file mode 100644 index 000000000..188190f04 --- /dev/null +++ b/fpga/usrp2/top/E1x0/tb_u1e.v @@ -0,0 +1,58 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +`timescale 1ps / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module tb_u1e(); + + wire [2:0] debug_led; + wire [31:0] debug; + wire [1:0] debug_clk; + + xlnx_glbl glbl (.GSR(),.GTS()); + + initial begin + $dumpfile("tb_u1e.lxt"); + $dumpvars(0,tb_u1e); + end + + // GPMC + wire EM_CLK, EM_WAIT0, EM_NCS4, EM_NCS6, EM_NWE, EM_NOE; + wire [15:0] EM_D; + wire [10:1] EM_A; + wire [1:0] EM_NBE; + + reg clk_fpga = 0, rst_fpga = 1; + always #15625 clk_fpga = ~clk_fpga; + + initial #200000 + @(posedge clk_fpga) + rst_fpga <= 0; + + u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(rst_fpga), + .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), + .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), + .EM_NWE(EM_NWE), .EM_NOE(EM_NOE) ); + + gpmc_model_async gpmc_model_async + (.EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE), + .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), + .EM_NWE(EM_NWE), .EM_NOE(EM_NOE) ); + +endmodule // tb_u1e diff --git a/fpga/usrp2/top/E1x0/timing.ucf b/fpga/usrp2/top/E1x0/timing.ucf new file mode 100644 index 000000000..1483c2a05 --- /dev/null +++ b/fpga/usrp2/top/E1x0/timing.ucf @@ -0,0 +1,23 @@ + +NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P"; +TIMESPEC "TS_clk_fpga_p" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %; + +NET "EM_CLK" TNM_NET = "EM_CLK"; +TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 18867 ps HIGH 50 %; + +#constrain GPMC IO +INST "EM_D<*>" TNM = gpmc_net_out; +INST "EM_D<*>" TNM = gpmc_net; +INST "EM_A<*>" TNM = gpmc_net; +INST "EM_NCS4" TNM = gpmc_net; +INST "EM_NCS6" TNM = gpmc_net; +INST "EM_NWE" TNM = gpmc_net; +INST "EM_NOE" TNM = gpmc_net; + +TIMEGRP "gpmc_net" OFFSET = IN 6 ns VALID 10 ns BEFORE "EM_CLK" FALLING; +#TIMEGRP "gpmc_net_out" OFFSET = OUT 13 ns AFTER "EM_CLK" RISING; //2 clock cyc per read + +#constrain interrupt lines +NET "overo_gpio144" MAXDELAY = 5.5 ns; #have space +NET "overo_gpio146" MAXDELAY = 5.5 ns; #have data +NET "overo_gpio147" MAXDELAY = 5.5 ns; #have msg/aux spi miso |