aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp2/top/E1x0
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2/top/E1x0')
-rw-r--r--fpga/usrp2/top/E1x0/.gitignore6
-rw-r--r--fpga/usrp2/top/E1x0/E1x0.ucf261
-rw-r--r--fpga/usrp2/top/E1x0/E1x0.v215
-rw-r--r--fpga/usrp2/top/E1x0/Makefile17
-rw-r--r--fpga/usrp2/top/E1x0/Makefile.E100106
-rw-r--r--fpga/usrp2/top/E1x0/Makefile.E110106
-rw-r--r--fpga/usrp2/top/E1x0/README4
-rw-r--r--fpga/usrp2/top/E1x0/cmdfile20
-rwxr-xr-xfpga/usrp2/top/E1x0/core_compile3
-rw-r--r--fpga/usrp2/top/E1x0/make.sim7
-rw-r--r--fpga/usrp2/top/E1x0/tb_u1e.v58
-rw-r--r--fpga/usrp2/top/E1x0/timing.ucf23
12 files changed, 0 insertions, 826 deletions
diff --git a/fpga/usrp2/top/E1x0/.gitignore b/fpga/usrp2/top/E1x0/.gitignore
deleted file mode 100644
index 8d872713e..000000000
--- a/fpga/usrp2/top/E1x0/.gitignore
+++ /dev/null
@@ -1,6 +0,0 @@
-*~
-build
-*.log
-*.cmd
-tb_u1e
-*.lxt
diff --git a/fpga/usrp2/top/E1x0/E1x0.ucf b/fpga/usrp2/top/E1x0/E1x0.ucf
deleted file mode 100644
index 278fc289a..000000000
--- a/fpga/usrp2/top/E1x0/E1x0.ucf
+++ /dev/null
@@ -1,261 +0,0 @@
-
-NET "CLK_FPGA_P" LOC = "Y11" ;
-NET "CLK_FPGA_N" LOC = "Y10" ;
-
-## GPMC
-NET "EM_D<15>" LOC = "D13" ;
-NET "EM_D<14>" LOC = "D15" ;
-NET "EM_D<13>" LOC = "C16" ;
-NET "EM_D<12>" LOC = "B20" ;
-NET "EM_D<11>" LOC = "A19" ;
-NET "EM_D<10>" LOC = "A17" ;
-NET "EM_D<9>" LOC = "E15" ;
-NET "EM_D<8>" LOC = "F15" ;
-NET "EM_D<7>" LOC = "E16" ;
-NET "EM_D<6>" LOC = "F16" ;
-NET "EM_D<5>" LOC = "B17" ;
-NET "EM_D<4>" LOC = "C17" ;
-NET "EM_D<3>" LOC = "B19" ;
-NET "EM_D<2>" LOC = "D19" ;
-NET "EM_D<1>" LOC = "C19" ;
-NET "EM_D<0>" LOC = "A20" ;
-
-NET "EM_A<10>" LOC = "C14" ;
-NET "EM_A<9>" LOC = "C10" ;
-NET "EM_A<8>" LOC = "C5" ;
-NET "EM_A<7>" LOC = "A18" ;
-NET "EM_A<6>" LOC = "A15" ;
-NET "EM_A<5>" LOC = "A12" ;
-NET "EM_A<4>" LOC = "A10" ;
-NET "EM_A<3>" LOC = "E7" ;
-NET "EM_A<2>" LOC = "A7" ;
-NET "EM_A<1>" LOC = "C15" ;
-
-NET "EM_NCS6" LOC = "E17" ;
-NET "EM_NCS5" LOC = "E10" ;
-NET "EM_NCS4" LOC = "E6" ;
-#NET "EM_NCS1" LOC = "D18" ;
-#NET "EM_NCS0" LOC = "D17" ;
-
-NET "EM_CLK" LOC = "F11" ;
-NET "EM_WAIT0" LOC = "F14" ;
-NET "EM_NBE<1>" LOC = "D14" ;
-NET "EM_NBE<0>" LOC = "A13" ;
-NET "EM_NWE" LOC = "B13" ;
-NET "EM_NOE" LOC = "A14" ;
-#NET "EM_NADV_ALE" LOC = "B15" ;
-#NET "EM_NWP" LOC = "F13" ;
-
-## Overo GPIO
-NET "overo_gpio0" LOC = "F9" ; # MISC GPIO for debug
-NET "overo_gpio14" LOC = "C4" ; # MISC GPIO for debug
-NET "overo_gpio21" LOC = "D5" ; # MISC GPIO for debug
-NET "overo_gpio22" LOC = "A3" ; # MISC GPIO for debug
-NET "overo_gpio23" LOC = "B3" ; # MISC GPIO for debug
-NET "overo_gpio64" LOC = "A4" ; # MISC GPIO for debug
-NET "overo_gpio65" LOC = "F8" ; # MISC GPIO for debug
-
-NET "overo_gpio127" LOC = "C8" ; # Changed name to gpio10
-NET "overo_gpio128" LOC = "G8" ; # Changed name to gpio186
-
-NET "overo_gpio144" LOC = "A5" ; # tx_have_space
-NET "overo_gpio145" LOC = "C7" ; # tx_underrun
-NET "overo_gpio146" LOC = "A6" ; # rx_have_data
-NET "overo_gpio147" LOC = "B6" ; # rx_overrun
-NET "overo_gpio163" LOC = "D7" ; # MISC GPIO for debug
-NET "overo_gpio170" LOC = "E8" ; # MISC GPIO for debug
-NET "overo_gpio176" LOC = "B4" ; # MISC GPIO for debug
-
-## Overo UART
-NET "overo_txd1" LOC = "C6" ;
-NET "overo_rxd1" LOC = "D6" ;
-NET "fpga_txd1" LOC = "AB9" ;
-NET "fpga_rxd1" LOC = "AB8" ;
-
-## FTDI UART to USB converter
-NET "FPGA_TXD" LOC = "G19" ;
-NET "FPGA_RXD" LOC = "F20" ;
-
-#NET "SYSEN" LOC = "C11" ;
-
-## I2C
-NET "db_scl" LOC = "F19" ;
-NET "db_sda" LOC = "F18" ;
-
-## SPI
-### DBoard SPI
-NET "db_sclk_rx" LOC = "D21" ;
-NET "db_miso_rx" LOC = "D22" ;
-NET "db_mosi_rx" LOC = "D20" ;
-NET "db_sen_rx" LOC = "E19" ;
-NET "db_sclk_tx" LOC = "F21" ;
-NET "db_miso_tx" LOC = "E20" ;
-NET "db_mosi_tx" LOC = "G17" ;
-NET "db_sen_tx" LOC = "G18" ;
-
-### AD9862 SPI and aux SPI Interfaces
-#NET "aux_sdi_codec" LOC = "G3" ;
-#NET "aux_sdo_codec" LOC = "F3" ;
-#NET "aux_sclk_codec" LOC = "C1" ;
-NET "sen_codec" LOC = "F5" |IOSTANDARD = LVCMOS33;
-NET "mosi_codec" LOC = "F4" |IOSTANDARD = LVCMOS33;
-NET "miso_codec" LOC = "H4" ;
-NET "sclk_codec" LOC = "H3" |IOSTANDARD = LVCMOS33;
-
-### Clock Gen SPI
-NET "cgen_miso" LOC = "F22" ;
-NET "cgen_mosi" LOC = "E22" ;
-NET "cgen_sclk" LOC = "J19" ;
-NET "cgen_sen_b" LOC = "H20" ;
-
-## Clock gen control
-NET "cgen_st_status" LOC = "P20" ;
-NET "cgen_st_ld" LOC = "R17" ;
-NET "cgen_st_refmon" LOC = "P17" ;
-NET "cgen_sync_b" LOC = "U18" ;
-NET "cgen_ref_sel" LOC = "U19" ;
-
-## Debug pins
-NET "debug_led<3>" LOC = "Y15" ;
-NET "debug_led<2>" LOC = "K16" ;
-NET "debug_led<1>" LOC = "J17" ;
-NET "debug_led<0>" LOC = "H22" ;
-NET "debug<0>" LOC = "G22" ;
-NET "debug<1>" LOC = "H17" ;
-NET "debug<2>" LOC = "H18" ;
-NET "debug<3>" LOC = "K20" ;
-NET "debug<4>" LOC = "J20" ;
-NET "debug<5>" LOC = "K19" ;
-NET "debug<6>" LOC = "K18" ;
-NET "debug<7>" LOC = "L22" ;
-NET "debug<8>" LOC = "K22" ;
-NET "debug<9>" LOC = "N22" ;
-NET "debug<10>" LOC = "M22" ;
-NET "debug<11>" LOC = "N20" ;
-NET "debug<12>" LOC = "N19" ;
-NET "debug<13>" LOC = "R22" ;
-NET "debug<14>" LOC = "P22" ;
-NET "debug<15>" LOC = "N17" ;
-NET "debug<16>" LOC = "P16" ;
-NET "debug<17>" LOC = "U22" ;
-NET "debug<18>" LOC = "P19" ;
-NET "debug<19>" LOC = "R18" ;
-NET "debug<20>" LOC = "U20" ;
-NET "debug<21>" LOC = "T20" ;
-NET "debug<22>" LOC = "R19" ;
-NET "debug<23>" LOC = "R20" ;
-NET "debug<24>" LOC = "W22" ;
-NET "debug<25>" LOC = "Y22" ;
-NET "debug<26>" LOC = "T18" ;
-NET "debug<27>" LOC = "T17" ;
-NET "debug<28>" LOC = "W19" ;
-NET "debug<29>" LOC = "V20" ;
-NET "debug<30>" LOC = "Y21" ;
-NET "debug<31>" LOC = "AA22" ;
-NET "debug_clk<0>" LOC = "N18" ;
-NET "debug_clk<1>" LOC = "M17" ;
-
-NET "debug_pb" LOC = "C22" ;
-
-#NET "reset_codec" LOC = "C2" ;
-
-NET "RXSYNC" LOC = "F2" ;
-NET "DB<11>" LOC = "G6" ;
-NET "DB<10>" LOC = "G5" ;
-NET "DB<9>" LOC = "E4" ;
-NET "DB<8>" LOC = "E3" ;
-NET "DB<7>" LOC = "H6" ;
-NET "DB<6>" LOC = "H5" ;
-NET "DB<5>" LOC = "H1" ;
-NET "DB<4>" LOC = "G1" ;
-NET "DB<3>" LOC = "K5" ;
-NET "DB<2>" LOC = "K4" ;
-NET "DB<1>" LOC = "H2" ;
-NET "DB<0>" LOC = "L5" ;
-
-NET "DA<11>" LOC = "K6" ;
-NET "DA<10>" LOC = "K3" ;
-NET "DA<9>" LOC = "K2" ;
-NET "DA<8>" LOC = "N1" ;
-NET "DA<7>" LOC = "N5" ;
-NET "DA<6>" LOC = "N6" ;
-NET "DA<5>" LOC = "P2" ;
-NET "DA<4>" LOC = "P1" ;
-NET "DA<3>" LOC = "R6" ;
-NET "DA<2>" LOC = "P6" ;
-NET "DA<1>" LOC = "R1" ;
-NET "DA<0>" LOC = "R2" ;
-
-NET "TX<13>" LOC = "T6" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<12>" LOC = "U1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<11>" LOC = "T1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<10>" LOC = "R5" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<9>" LOC = "V1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<8>" LOC = "U2" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<7>" LOC = "T4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<6>" LOC = "R3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<5>" LOC = "W1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<4>" LOC = "Y1" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<3>" LOC = "V3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<2>" LOC = "V4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<1>" LOC = "W2" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TX<0>" LOC = "W3" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TXSYNC" LOC = "U5" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-NET "TXBLANK" LOC = "U4" |IOSTANDARD = LVCMOS33 |DRIVE = 12 |SLEW = FAST ;
-
-NET "PPS_IN" LOC = "M5" ;
-
-NET "io_tx<0>" LOC = "AB20" ;
-NET "io_tx<1>" LOC = "Y17" ;
-NET "io_tx<2>" LOC = "Y16" ;
-NET "io_tx<3>" LOC = "U16" ;
-NET "io_tx<4>" LOC = "V16" ;
-NET "io_tx<5>" LOC = "AB19" ;
-NET "io_tx<6>" LOC = "AA19" ;
-NET "io_tx<7>" LOC = "U14" ;
-NET "io_tx<8>" LOC = "U15" ;
-NET "io_tx<9>" LOC = "AB17" ;
-NET "io_tx<10>" LOC = "AB18" ;
-NET "io_tx<11>" LOC = "Y13" ;
-NET "io_tx<12>" LOC = "W14" ;
-NET "io_tx<13>" LOC = "U13" ;
-NET "io_tx<14>" LOC = "AA15" ;
-NET "io_tx<15>" LOC = "AB14" ;
-
-NET "io_rx<0>" LOC = "Y8" ;
-NET "io_rx<1>" LOC = "Y9" ;
-NET "io_rx<2>" LOC = "V7" ;
-NET "io_rx<3>" LOC = "U8" ;
-NET "io_rx<4>" LOC = "V10" ;
-NET "io_rx<5>" LOC = "U9" ;
-NET "io_rx<6>" LOC = "AB7" ;
-NET "io_rx<7>" LOC = "AA8" ;
-NET "io_rx<8>" LOC = "W8" ;
-NET "io_rx<9>" LOC = "V8" ;
-NET "io_rx<10>" LOC = "AB5" ;
-NET "io_rx<11>" LOC = "AB6" ;
-NET "io_rx<12>" LOC = "AB4" ;
-NET "io_rx<13>" LOC = "AA4" ;
-NET "io_rx<14>" LOC = "W5" ;
-NET "io_rx<15>" LOC = "Y4" ;
-
-#NET "CLKOUT2_CODEC" LOC = "U12" ;
-#NET "CLKOUT1_CODEC" LOC = "V12" ;
-
-## FPGA Config Pins
-#NET "fpga_cfg_prog_b" LOC = "A2" ;
-#NET "fpga_cfg_done" LOC = "AB21" ;
-#NET "fpga_cfg_din" LOC = "W17" ;
-#NET "fpga_cfg_cclk" LOC = "V17" ;
-#NET "fpga_cfg_init_b" LOC = "W15" ;
-
-## Unused
-#NET "unnamed_net53" LOC = "B1" ; # TMS
-#NET "unnamed_net52" LOC = "B22" ; # TDO
-#NET "unnamed_net51" LOC = "D2" ; # TDI
-#NET "unnamed_net50" LOC = "A21" ; # TCK
-#NET "unnamed_net59" LOC = "F7" ; # PUDC_B
-#NET "unnamed_net58" LOC = "V6" ; # M2
-#NET "unnamed_net57" LOC = "AA3" ; # M1
-#NET "unnamed_net56" LOC = "AB3" ; # M0
-#NET "GND" LOC = "V19" ; # Suspend, unused
diff --git a/fpga/usrp2/top/E1x0/E1x0.v b/fpga/usrp2/top/E1x0/E1x0.v
deleted file mode 100644
index 44129ce92..000000000
--- a/fpga/usrp2/top/E1x0/E1x0.v
+++ /dev/null
@@ -1,215 +0,0 @@
-//
-// Copyright 2011-2012 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-`timescale 1ns / 1ps
-//////////////////////////////////////////////////////////////////////////////////
-
-module E1x0
- (input CLK_FPGA_P, input CLK_FPGA_N, // Diff
- output [3:0] debug_led, output [31:0] debug, output [1:0] debug_clk,
- input debug_pb, output FPGA_TXD, input FPGA_RXD,
- output fpga_txd1, input fpga_rxd1, input overo_txd1, output overo_rxd1,
-
- // GPMC
- input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
- input EM_WAIT0, input EM_NCS4, input EM_NCS5, input EM_NCS6,
- input EM_NWE, input EM_NOE,
-
- inout db_sda, inout db_scl, // I2C
-
- output db_sclk_tx, output db_sen_tx, output db_mosi_tx, input db_miso_tx, // DB TX SPI
- output db_sclk_rx, output db_sen_rx, output db_mosi_rx, input db_miso_rx, // DB TX SPI
- output sclk_codec, output sen_codec, output mosi_codec, input miso_codec, // AD9862 main SPI
- output cgen_sclk, output cgen_sen_b, output cgen_mosi, input cgen_miso, // Clock gen SPI
-
- input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel,
- input overo_gpio65, input overo_gpio128, input overo_gpio145, output overo_gpio147, //aux SPI
-
- output overo_gpio144, output overo_gpio146, // Fifo controls
- input overo_gpio0, input overo_gpio14, input overo_gpio21, input overo_gpio22, // Misc GPIO
- input overo_gpio23, input overo_gpio64, input overo_gpio127, // Misc GPIO
- input overo_gpio176, input overo_gpio163, input overo_gpio170, // Misc GPIO
-
- inout [15:0] io_tx, inout [15:0] io_rx,
-
- output [13:0] TX, output TXSYNC, output TXBLANK,
- input [11:0] DA, input [11:0] DB, input RXSYNC,
-
- input PPS_IN
- );
-
- assign FPGA_TXD = 0; //dont care
-
- // /////////////////////////////////////////////////////////////////////////
- // Clocking
- wire clk_fpga;
- wire reset;
-
- reg por_rst;
- reg [7:0] por_counter = 8'h0;
-
- always @(posedge clk_fpga)
- if (por_counter != 8'h55)
- begin
- por_counter <= por_counter + 8'h1;
- por_rst <= 1'b1;
- end
- else por_rst <= 1'b0;
-
- wire async_reset;
- cross_clock_reader #(.WIDTH(1)) read_gpio_reset
- (.clk(clk_fpga), .rst(por_rst), .in(cgen_sen_b & ~cgen_sclk), .out(async_reset));
-
- IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE"))
- clk_fpga_pin (.O(clk_fpga),.I(CLK_FPGA_P),.IB(CLK_FPGA_N));
-
- reset_sync reset_sync(.clk(clk_fpga), .reset_in(async_reset), .reset_out(reset));
-
- // /////////////////////////////////////////////////////////////////////////
- // UART level conversion
- assign fpga_txd1 = overo_txd1;
- assign overo_rxd1 = fpga_rxd1;
-
- // SPI
- wire mosi, sclk, miso;
- assign { db_sclk_tx, db_mosi_tx } = ~db_sen_tx ? {sclk,mosi} : 2'b0;
- assign { db_sclk_rx, db_mosi_rx } = ~db_sen_rx ? {sclk,mosi} : 2'b0;
- assign { sclk_codec, mosi_codec } = ~sen_codec ? {sclk,mosi} : 2'b0;
- //assign { cgen_sclk, cgen_mosi } = ~cgen_sen_b ? {sclk,mosi} : 2'b0; //replaced by aux spi
- assign miso = (~db_sen_tx & db_miso_tx) | (~db_sen_rx & db_miso_rx) |
- (~sen_codec & miso_codec) | (~cgen_sen_b & cgen_miso);
-
- //assign the aux spi to the cgen (bypasses control fifo)
- assign cgen_sclk = overo_gpio65;
- assign cgen_sen_b = overo_gpio128;
- assign cgen_mosi = overo_gpio145;
- wire has_resp; //re-purpose gpio for interrupt when we are not using aux spi
- assign overo_gpio147 = (cgen_sen_b == 1'b0)? cgen_miso : has_resp;
-
- wire _cgen_sen_b;
- //assign cgen_sen_b = _cgen_sen_b; //replaced by aux spi
-
- // /////////////////////////////////////////////////////////////////////////
- // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL
-
- assign TXBLANK = 0;
- wire [13:0] tx_i, tx_q;
-
- reg[13:0] delay_q;
- always @(posedge clk_fpga)
- delay_q <= tx_q;
-
- genvar i;
- generate
- for(i=0;i<14;i=i+1)
- begin : gen_dacout
- ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
- .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1
- .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset
- ODDR2_inst (.Q(TX[i]), // 1-bit DDR output data
- .C0(clk_fpga), // 1-bit clock input
- .C1(~clk_fpga), // 1-bit clock input
- .CE(1'b1), // 1-bit clock enable input
- .D0(tx_i[i]), // 1-bit data input (associated with C0)
- .D1(delay_q[i]), // 1-bit data input (associated with C1)
- .R(1'b0), // 1-bit reset input
- .S(1'b0)); // 1-bit set input
- end // block: gen_dacout
- endgenerate
- ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1"
- .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1
- .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset
- ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data
- .C0(clk_fpga), // 1-bit clock input
- .C1(~clk_fpga), // 1-bit clock input
- .CE(1'b1), // 1-bit clock enable input
- .D0(1'b0), // 1-bit data input (associated with C0)
- .D1(1'b1), // 1-bit data input (associated with C1)
- .R(1'b0), // 1-bit reset input
- .S(1'b0)); // 1-bit set input
-
- // /////////////////////////////////////////////////////////////////////////
- // RX ADC -- handles inversion
-
- reg [11:0] rx_i, rx_q;
- always @(posedge clk_fpga) begin
- rx_i <= ~DA;
- rx_q <= ~DB;
- end
-
- // /////////////////////////////////////////////////////////////////////////
- // Main Core
- wire [35:0] rx_data, tx_data, ctrl_data, resp_data;
- wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy;
- wire dsp_rx_run, dsp_tx_run;
- wire [7:0] sen8;
- assign {_cgen_sen_b,sen_codec,db_sen_tx,db_sen_rx} = sen8[3:0];
- wire [31:0] core_debug;
-
- assign debug_led = ~{PPS_IN, dsp_tx_run, dsp_rx_run, cgen_st_ld};
- wire cgen_sync;
- assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1};
-
- u1plus_core #(
- .NUM_RX_DSPS(2),
- .DSP_RX_XTRA_FIFOSIZE(10),
- .DSP_TX_XTRA_FIFOSIZE(10),
- .USE_PACKET_PADDER(0)
- ) core(
- .clk(clk_fpga), .reset(reset),
- .debug(core_debug), .debug_clk(debug_clk),
-
- .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
- .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
- .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
- .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
-
- .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run),
- .clock_sync(cgen_sync),
-
- .db_sda(db_sda), .db_scl(db_scl),
- .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso),
- .io_tx(io_tx), .io_rx(io_rx),
- .tx_i(tx_i), .tx_q(tx_q),
- .rx_i(rx_i), .rx_q(rx_q),
- .pps_in(PPS_IN) );
-
- // /////////////////////////////////////////////////////////////////////////
- // Interface between GPMC/host
- wire [31:0] gpmc_debug;
-
- gpmc #(.TXFIFOSIZE(13), .RXFIFOSIZE(13))
- gpmc (.arst(async_reset),
- .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6), .EM_NWE(EM_NWE),
- .EM_NOE(EM_NOE),
-
- .rx_have_data(overo_gpio146), .tx_have_space(overo_gpio144),
- .resp_have_data(has_resp),
-
- .fifo_clk(clk_fpga), .fifo_rst(reset),
- .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy),
- .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy),
- .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy),
- .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy),
-
- .debug(gpmc_debug));
-
- //assign debug = gpmc_debug;
- assign debug = core_debug;
-
-endmodule // E1x0
diff --git a/fpga/usrp2/top/E1x0/Makefile b/fpga/usrp2/top/E1x0/Makefile
deleted file mode 100644
index 0ca8ed2dd..000000000
--- a/fpga/usrp2/top/E1x0/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright 2011 Ettus Research LLC
-#
-
-all: E100 E110
- find -name "*.twr" | xargs grep constraint | grep met
-
-clean:
- rm -rf build*
-
-E100:
- make -f Makefile.$@ bin
-
-E110:
- make -f Makefile.$@ bin
-
-.PHONY: all clean
diff --git a/fpga/usrp2/top/E1x0/Makefile.E100 b/fpga/usrp2/top/E1x0/Makefile.E100
deleted file mode 100644
index 92334d987..000000000
--- a/fpga/usrp2/top/E1x0/Makefile.E100
+++ /dev/null
@@ -1,106 +0,0 @@
-#
-# Copyright 2008-2012 Ettus Research LLC
-#
-
-##################################################
-# Project Setup
-##################################################
-TOP_MODULE = E1x0
-BUILD_DIR = $(abspath build$(ISE)-E100)
-
-# set me in a custom makefile
-CUSTOM_SRCS =
-CUSTOM_DEFS =
-
-##################################################
-# Include other makefiles
-##################################################
-
-include ../Makefile.common
-include ../../fifo/Makefile.srcs
-include ../../control_lib/Makefile.srcs
-include ../../sdr_lib/Makefile.srcs
-include ../../serdes/Makefile.srcs
-include ../../simple_gemac/Makefile.srcs
-include ../../timing/Makefile.srcs
-include ../../opencores/Makefile.srcs
-include ../../vrt/Makefile.srcs
-include ../../udp/Makefile.srcs
-include ../../coregen/Makefile.srcs
-include ../../gpmc/Makefile.srcs
-
-##################################################
-# Project Properties
-##################################################
-export PROJECT_PROPERTIES := \
-family "Spartan-3A DSP" \
-device xc3sd1800a \
-package cs484 \
-speed -4 \
-top_level_module_type "HDL" \
-synthesis_tool "XST (VHDL/Verilog)" \
-simulator "ISE Simulator (VHDL/Verilog)" \
-"Preferred Language" "Verilog" \
-"Enable Message Filtering" FALSE \
-"Display Incremental Messages" FALSE
-
-##################################################
-# Sources
-##################################################
-TOP_SRCS = \
-../B100/u1plus_core.v \
-E1x0.v \
-E1x0.ucf \
-timing.ucf
-
-SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
-$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
-$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \
-$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \
-$(GPMC_SRCS)
-
-##################################################
-# Process Properties
-##################################################
-SYNTHESIZE_PROPERTIES = \
-"Number of Clock Buffers" 8 \
-"Pack I/O Registers into IOBs" Yes \
-"Optimization Effort" High \
-"Optimize Instantiated Primitives" TRUE \
-"Register Balancing" Yes \
-"Use Clock Enable" Auto \
-"Use Synchronous Reset" Auto \
-"Use Synchronous Set" Auto \
-"Verilog Macros" "$(CUSTOM_DEFS)"
-
-TRANSLATE_PROPERTIES = \
-"Macro Search Path" "$(shell pwd)/../../coregen/"
-
-MAP_PROPERTIES = \
-"Generate Detailed MAP Report" TRUE \
-"Allow Logic Optimization Across Hierarchy" TRUE \
-"Map to Input Functions" 4 \
-"Optimization Strategy (Cover Mode)" Speed \
-"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
-"Perform Timing-Driven Packing and Placement" TRUE \
-"Map Effort Level" High \
-"Extra Effort" Normal \
-"Combinatorial Logic Optimization" TRUE \
-"Register Duplication" TRUE
-
-PLACE_ROUTE_PROPERTIES = \
-"Place & Route Effort Level (Overall)" High
-
-STATIC_TIMING_PROPERTIES = \
-"Number of Paths in Error/Verbose Report" 10 \
-"Report Type" "Error Report"
-
-GEN_PROG_FILE_PROPERTIES = \
-"Configuration Rate" 6 \
-"Create Binary Configuration File" TRUE \
-"Done (Output Events)" 5 \
-"Enable Bitstream Compression" TRUE \
-"Enable Outputs (Output Events)" 6 \
-"Unused IOB Pins" "Pull Up"
-
-SIM_MODEL_PROPERTIES = ""
diff --git a/fpga/usrp2/top/E1x0/Makefile.E110 b/fpga/usrp2/top/E1x0/Makefile.E110
deleted file mode 100644
index e5be8d2fa..000000000
--- a/fpga/usrp2/top/E1x0/Makefile.E110
+++ /dev/null
@@ -1,106 +0,0 @@
-#
-# Copyright 2008-2012 Ettus Research LLC
-#
-
-##################################################
-# Project Setup
-##################################################
-TOP_MODULE = E1x0
-BUILD_DIR = $(abspath build$(ISE)-E110)
-
-# set me in a custom makefile
-CUSTOM_SRCS =
-CUSTOM_DEFS =
-
-##################################################
-# Include other makefiles
-##################################################
-
-include ../Makefile.common
-include ../../fifo/Makefile.srcs
-include ../../control_lib/Makefile.srcs
-include ../../sdr_lib/Makefile.srcs
-include ../../serdes/Makefile.srcs
-include ../../simple_gemac/Makefile.srcs
-include ../../timing/Makefile.srcs
-include ../../opencores/Makefile.srcs
-include ../../vrt/Makefile.srcs
-include ../../udp/Makefile.srcs
-include ../../coregen/Makefile.srcs
-include ../../gpmc/Makefile.srcs
-
-##################################################
-# Project Properties
-##################################################
-export PROJECT_PROPERTIES := \
-family "Spartan-3A DSP" \
-device xc3sd3400a \
-package cs484 \
-speed -4 \
-top_level_module_type "HDL" \
-synthesis_tool "XST (VHDL/Verilog)" \
-simulator "ISE Simulator (VHDL/Verilog)" \
-"Preferred Language" "Verilog" \
-"Enable Message Filtering" FALSE \
-"Display Incremental Messages" FALSE
-
-##################################################
-# Sources
-##################################################
-TOP_SRCS = \
-../B100/u1plus_core.v \
-E1x0.v \
-E1x0.ucf \
-timing.ucf
-
-SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \
-$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \
-$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \
-$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \
-$(GPMC_SRCS)
-
-##################################################
-# Process Properties
-##################################################
-SYNTHESIZE_PROPERTIES = \
-"Number of Clock Buffers" 8 \
-"Pack I/O Registers into IOBs" Yes \
-"Optimization Effort" High \
-"Optimize Instantiated Primitives" TRUE \
-"Register Balancing" Yes \
-"Use Clock Enable" Auto \
-"Use Synchronous Reset" Auto \
-"Use Synchronous Set" Auto \
-"Verilog Macros" "$(CUSTOM_DEFS)"
-
-TRANSLATE_PROPERTIES = \
-"Macro Search Path" "$(shell pwd)/../../coregen/"
-
-MAP_PROPERTIES = \
-"Generate Detailed MAP Report" TRUE \
-"Allow Logic Optimization Across Hierarchy" TRUE \
-"Map to Input Functions" 4 \
-"Optimization Strategy (Cover Mode)" Speed \
-"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \
-"Perform Timing-Driven Packing and Placement" TRUE \
-"Map Effort Level" High \
-"Extra Effort" Normal \
-"Combinatorial Logic Optimization" TRUE \
-"Register Duplication" TRUE
-
-PLACE_ROUTE_PROPERTIES = \
-"Place & Route Effort Level (Overall)" High
-
-STATIC_TIMING_PROPERTIES = \
-"Number of Paths in Error/Verbose Report" 10 \
-"Report Type" "Error Report"
-
-GEN_PROG_FILE_PROPERTIES = \
-"Configuration Rate" 6 \
-"Create Binary Configuration File" TRUE \
-"Done (Output Events)" 5 \
-"Enable Bitstream Compression" TRUE \
-"Enable Outputs (Output Events)" 6 \
-"Unused IOB Pins" "Pull Up"
-
-SIM_MODEL_PROPERTIES = ""
diff --git a/fpga/usrp2/top/E1x0/README b/fpga/usrp2/top/E1x0/README
deleted file mode 100644
index 14c7a4955..000000000
--- a/fpga/usrp2/top/E1x0/README
+++ /dev/null
@@ -1,4 +0,0 @@
-
-make clean
-make sim
-./tb_u1e -lxt2
diff --git a/fpga/usrp2/top/E1x0/cmdfile b/fpga/usrp2/top/E1x0/cmdfile
deleted file mode 100644
index 291c723b8..000000000
--- a/fpga/usrp2/top/E1x0/cmdfile
+++ /dev/null
@@ -1,20 +0,0 @@
-
-# My stuff
--y .
--y ../../control_lib
--y ../../control_lib/newfifo
--y ../../sdr_lib
--y ../../timing
--y ../../coregen
--y ../../gpmc
-
-# Models
--y ../../models
--y /opt/Xilinx/10.1/ISE/verilog/src/unisims
-
-# Open Cores
--y ../../opencores/spi/rtl/verilog
-+incdir+../../opencores/spi/rtl/verilog
--y ../../opencores/i2c/rtl/verilog
-+incdir+../../opencores/i2c/rtl/verilog
-
diff --git a/fpga/usrp2/top/E1x0/core_compile b/fpga/usrp2/top/E1x0/core_compile
deleted file mode 100755
index ab992f29d..000000000
--- a/fpga/usrp2/top/E1x0/core_compile
+++ /dev/null
@@ -1,3 +0,0 @@
-iverilog -Wall -y. -y ../../control_lib/ -y ../../custom/ -y ../../fifo/ -y ../../gpmc/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../B100 -y $XILINX/verilog/src/unisims E1x0.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models
-
-
diff --git a/fpga/usrp2/top/E1x0/make.sim b/fpga/usrp2/top/E1x0/make.sim
deleted file mode 100644
index 1c163884c..000000000
--- a/fpga/usrp2/top/E1x0/make.sim
+++ /dev/null
@@ -1,7 +0,0 @@
-all: sim
-
-sim:
- iverilog -Wimplicit -Wportbind -c cmdfile tb_u1e.v -o tb_u1e
-
-clean:
- rm -f tb_u1e *.vcd *.lxt a.out
diff --git a/fpga/usrp2/top/E1x0/tb_u1e.v b/fpga/usrp2/top/E1x0/tb_u1e.v
deleted file mode 100644
index 188190f04..000000000
--- a/fpga/usrp2/top/E1x0/tb_u1e.v
+++ /dev/null
@@ -1,58 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-`timescale 1ps / 1ps
-//////////////////////////////////////////////////////////////////////////////////
-
-module tb_u1e();
-
- wire [2:0] debug_led;
- wire [31:0] debug;
- wire [1:0] debug_clk;
-
- xlnx_glbl glbl (.GSR(),.GTS());
-
- initial begin
- $dumpfile("tb_u1e.lxt");
- $dumpvars(0,tb_u1e);
- end
-
- // GPMC
- wire EM_CLK, EM_WAIT0, EM_NCS4, EM_NCS6, EM_NWE, EM_NOE;
- wire [15:0] EM_D;
- wire [10:1] EM_A;
- wire [1:0] EM_NBE;
-
- reg clk_fpga = 0, rst_fpga = 1;
- always #15625 clk_fpga = ~clk_fpga;
-
- initial #200000
- @(posedge clk_fpga)
- rst_fpga <= 0;
-
- u1e_core u1e_core(.clk_fpga(clk_fpga), .rst_fpga(rst_fpga),
- .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk),
- .EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6),
- .EM_NWE(EM_NWE), .EM_NOE(EM_NOE) );
-
- gpmc_model_async gpmc_model_async
- (.EM_CLK(EM_CLK), .EM_D(EM_D), .EM_A(EM_A), .EM_NBE(EM_NBE),
- .EM_WAIT0(EM_WAIT0), .EM_NCS4(EM_NCS4), .EM_NCS6(EM_NCS6),
- .EM_NWE(EM_NWE), .EM_NOE(EM_NOE) );
-
-endmodule // tb_u1e
diff --git a/fpga/usrp2/top/E1x0/timing.ucf b/fpga/usrp2/top/E1x0/timing.ucf
deleted file mode 100644
index 1483c2a05..000000000
--- a/fpga/usrp2/top/E1x0/timing.ucf
+++ /dev/null
@@ -1,23 +0,0 @@
-
-NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P";
-TIMESPEC "TS_clk_fpga_p" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %;
-
-NET "EM_CLK" TNM_NET = "EM_CLK";
-TIMESPEC "TS_em_clk" = PERIOD "EM_CLK" 18867 ps HIGH 50 %;
-
-#constrain GPMC IO
-INST "EM_D<*>" TNM = gpmc_net_out;
-INST "EM_D<*>" TNM = gpmc_net;
-INST "EM_A<*>" TNM = gpmc_net;
-INST "EM_NCS4" TNM = gpmc_net;
-INST "EM_NCS6" TNM = gpmc_net;
-INST "EM_NWE" TNM = gpmc_net;
-INST "EM_NOE" TNM = gpmc_net;
-
-TIMEGRP "gpmc_net" OFFSET = IN 6 ns VALID 10 ns BEFORE "EM_CLK" FALLING;
-#TIMEGRP "gpmc_net_out" OFFSET = OUT 13 ns AFTER "EM_CLK" RISING; //2 clock cyc per read
-
-#constrain interrupt lines
-NET "overo_gpio144" MAXDELAY = 5.5 ns; #have space
-NET "overo_gpio146" MAXDELAY = 5.5 ns; #have data
-NET "overo_gpio147" MAXDELAY = 5.5 ns; #have msg/aux spi miso
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 01:12:20 +0000