diff options
Diffstat (limited to 'fpga/usrp2/top/B100')
| -rw-r--r-- | fpga/usrp2/top/B100/.gitignore | 1 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/Makefile | 97 | ||||
| -rwxr-xr-x | fpga/usrp2/top/B100/core_compile | 1 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/timing.ucf | 5 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/u1plus.ucf | 203 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/u1plus.v | 173 | ||||
| -rw-r--r-- | fpga/usrp2/top/B100/u1plus_core.v | 409 |
7 files changed, 889 insertions, 0 deletions
diff --git a/fpga/usrp2/top/B100/.gitignore b/fpga/usrp2/top/B100/.gitignore new file mode 100644 index 000000000..1b2211df0 --- /dev/null +++ b/fpga/usrp2/top/B100/.gitignore @@ -0,0 +1 @@ +build* diff --git a/fpga/usrp2/top/B100/Makefile b/fpga/usrp2/top/B100/Makefile new file mode 100644 index 000000000..ca6ec9320 --- /dev/null +++ b/fpga/usrp2/top/B100/Makefile @@ -0,0 +1,97 @@ +# +# Copyright 2008 Ettus Research LLC +# + +################################################## +# Project Setup +################################################## +BUILD_DIR := build/ +export TOP_MODULE := u1plus +export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise + +include ../Makefile.common +include ../../fifo/Makefile.srcs +include ../../control_lib/Makefile.srcs +include ../../sdr_lib/Makefile.srcs +include ../../serdes/Makefile.srcs +include ../../simple_gemac/Makefile.srcs +include ../../timing/Makefile.srcs +include ../../opencores/Makefile.srcs +include ../../vrt/Makefile.srcs +include ../../udp/Makefile.srcs +include ../../coregen/Makefile.srcs +include ../../gpif/Makefile.srcs + +################################################## +# Project Properties +################################################## +export PROJECT_PROPERTIES := \ +family "Spartan3A" \ +device XC3S1400A \ +package ft256 \ +speed -4 \ +top_level_module_type "HDL" \ +synthesis_tool "XST (VHDL/Verilog)" \ +simulator "ISE Simulator (VHDL/Verilog)" \ +"Preferred Language" "Verilog" \ +"Enable Message Filtering" FALSE \ +"Display Incremental Messages" FALSE + +################################################## +# Sources +################################################## +TOP_SRCS = \ +u1plus.v \ +u1plus_core.v \ +u1plus.ucf \ +timing.ucf + +SOURCES = $(abspath $(TOP_SRCS)) $(FIFO_SRCS) \ +$(CONTROL_LIB_SRCS) $(SDR_LIB_SRCS) $(SERDES_SRCS) \ +$(SIMPLE_GEMAC_SRCS) $(TIMING_SRCS) $(OPENCORES_SRCS) \ +$(VRT_SRCS) $(UDP_SRCS) $(COREGEN_SRCS) $(EXTRAM_SRCS) \ +$(GPIF_SRCS) + +################################################## +# Process Properties +################################################## +SYNTHESIZE_PROPERTIES = \ +"Number of Clock Buffers" 8 \ +"Pack I/O Registers into IOBs" Yes \ +"Optimization Effort" High \ +"Optimize Instantiated Primitives" TRUE \ +"Register Balancing" Yes \ +"Use Clock Enable" Auto \ +"Use Synchronous Reset" Auto \ +"Use Synchronous Set" Auto + +TRANSLATE_PROPERTIES = \ +"Macro Search Path" "$(shell pwd)/../../coregen/" + +MAP_PROPERTIES = \ +"Allow Logic Optimization Across Hierarchy" TRUE \ +"Map to Input Functions" 4 \ +"Optimization Strategy (Cover Mode)" Speed \ +"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \ +"Perform Timing-Driven Packing and Placement" TRUE \ +"Map Effort Level" High \ +"Extra Effort" Normal \ +"Combinatorial Logic Optimization" TRUE \ +"Register Duplication" TRUE + +PLACE_ROUTE_PROPERTIES = \ +"Place & Route Effort Level (Overall)" High + +STATIC_TIMING_PROPERTIES = \ +"Number of Paths in Error/Verbose Report" 10 \ +"Report Type" "Error Report" + +GEN_PROG_FILE_PROPERTIES = \ +"Configuration Rate" 6 \ +"Create Binary Configuration File" TRUE \ +"Done (Output Events)" 5 \ +"Enable Bitstream Compression" TRUE \ +"Enable Outputs (Output Events)" 6 \ +"Unused IOB Pins" "Pull Up" + +SIM_MODEL_PROPERTIES = "" diff --git a/fpga/usrp2/top/B100/core_compile b/fpga/usrp2/top/B100/core_compile new file mode 100755 index 000000000..b2ccc8b49 --- /dev/null +++ b/fpga/usrp2/top/B100/core_compile @@ -0,0 +1 @@ +iverilog -Wall -y. -y ../../control_lib/ -y ../../fifo/ -y ../../gpif/ -y ../../models/ -y ../../sdr_lib/ -y ../../coregen/ -y ../../vrt/ -y ../../opencores/i2c/rtl/verilog/ -y ../../opencores/spi/rtl/verilog/ -y ../../timing/ -y ../../opencores/8b10b/ -I ../../opencores/spi/rtl/verilog/ -I ../../opencores/i2c/rtl/verilog/ -y ../../simple_gemac u1plus_core.v 2>&1 | grep -v timescale | grep -v coregen | grep -v models diff --git a/fpga/usrp2/top/B100/timing.ucf b/fpga/usrp2/top/B100/timing.ucf new file mode 100644 index 000000000..b2a455f6d --- /dev/null +++ b/fpga/usrp2/top/B100/timing.ucf @@ -0,0 +1,5 @@ +NET "CLK_FPGA_P" TNM_NET = "CLK_FPGA_P"; +TIMESPEC "TS_CLK_FPGA_P" = PERIOD "CLK_FPGA_P" 15625 ps HIGH 50 %; + +NET "IFCLK" TNM_NET = "IFCLK"; +TIMESPEC "TS_IFCLK" = PERIOD "IFCLK" 20833 ps HIGH 50 %; diff --git a/fpga/usrp2/top/B100/u1plus.ucf b/fpga/usrp2/top/B100/u1plus.ucf new file mode 100644 index 000000000..cd89878e3 --- /dev/null +++ b/fpga/usrp2/top/B100/u1plus.ucf @@ -0,0 +1,203 @@ +## Main Clock +NET "CLK_FPGA_P" LOC = "R7" ; +NET "CLK_FPGA_N" LOC = "T7" ; + +## UART +NET "FPGA_TXD" LOC = "H16" ; +NET "FPGA_RXD" LOC = "H12" ; + +## I2C +NET "SDA_FPGA" LOC = "T13" ; +NET "SCL_FPGA" LOC = "R13" ; + +## CGEN +NET "cgen_st_ld" LOC = "M13" ; +NET "cgen_st_refmon" LOC = "J14" ; +NET "cgen_st_status" LOC = "P6" ; +NET "cgen_ref_sel" LOC = "T2" ; +NET "cgen_sync_b" LOC = "H15" ; + +## FPGA Config +#NET "fpga_cfg_din" LOC = "T14" ; +#NET "fpga_cfg_cclk" LOC = "R14" ; +#NET "fpga_cfg_init_b" LOC = "T12" ; + +## MISC +#NET "mystery_bus<2>" LOC = "T11" ; +#NET "mystery_bus<1>" LOC = "C4" ; +#NET "mystery_bus<0>" LOC = "E7" ; +NET "reset_n" LOC = "D5" ; +NET "PPS_IN" LOC = "M14" ; +NET "reset_codec" LOC = "B14" ; + +## GPIF +NET "GPIF_D<15>" LOC = "P7" ; +NET "GPIF_D<14>" LOC = "N8" ; +NET "GPIF_D<13>" LOC = "T5" ; +NET "GPIF_D<12>" LOC = "T6" ; +NET "GPIF_D<11>" LOC = "N6" ; +NET "GPIF_D<10>" LOC = "P5" ; +NET "GPIF_D<9>" LOC = "R3" ; +NET "GPIF_D<8>" LOC = "T3" ; +NET "GPIF_D<7>" LOC = "N12" ; +NET "GPIF_D<6>" LOC = "P13" ; +NET "GPIF_D<5>" LOC = "P11" ; +NET "GPIF_D<4>" LOC = "R9" ; +NET "GPIF_D<3>" LOC = "T9" ; +NET "GPIF_D<2>" LOC = "N9" ; +NET "GPIF_D<1>" LOC = "P9" ; +NET "GPIF_D<0>" LOC = "P8" ; + +NET "GPIF_CTL<3>" LOC = "N5" ; +NET "GPIF_CTL<2>" LOC = "M11" ; +NET "GPIF_CTL<1>" LOC = "M9" ; +NET "GPIF_CTL<0>" LOC = "M7" ; + +NET "GPIF_RDY<3>" LOC = "N11" ; +NET "GPIF_RDY<2>" LOC = "T10" ; +NET "GPIF_RDY<1>" LOC = "T4" ; +NET "GPIF_RDY<0>" LOC = "R5" ; + +NET "FX2_PA7_FLAGD" LOC = "P12" ; +NET "FX2_PA6_PKTEND" LOC = "R11" ; +NET "FX2_PA2_SLOE" LOC = "P10" ; + +NET "IFCLK" LOC = "T8" ; + +## LEDs +NET "debug_led<2>" LOC = "R2" ; +NET "debug_led<1>" LOC = "N4" ; +NET "debug_led<0>" LOC = "P4" ; + +## Debug bus +NET "debug_clk<0>" LOC = "K15" ; +NET "debug_clk<1>" LOC = "K14" ; +NET "debug<0>" LOC = "K16" ; +NET "debug<1>" LOC = "J16" ; +NET "debug<2>" LOC = "C16" ; +NET "debug<3>" LOC = "C15" ; +NET "debug<4>" LOC = "E13" ; +NET "debug<5>" LOC = "D14" ; +NET "debug<6>" LOC = "D16" ; +NET "debug<7>" LOC = "D15" ; +NET "debug<8>" LOC = "E14" ; +NET "debug<9>" LOC = "F13" ; +NET "debug<10>" LOC = "G13" ; +NET "debug<11>" LOC = "F14" ; +NET "debug<12>" LOC = "E16" ; +NET "debug<13>" LOC = "F15" ; +NET "debug<14>" LOC = "H13" ; +NET "debug<15>" LOC = "G14" ; +NET "debug<16>" LOC = "G16" ; +NET "debug<17>" LOC = "F16" ; +NET "debug<18>" LOC = "J12" ; +NET "debug<19>" LOC = "J13" ; +NET "debug<20>" LOC = "L14" ; +NET "debug<21>" LOC = "L16" ; +NET "debug<22>" LOC = "M15" ; +NET "debug<23>" LOC = "M16" ; +NET "debug<24>" LOC = "L13" ; +NET "debug<25>" LOC = "K13" ; +NET "debug<26>" LOC = "P16" ; +NET "debug<27>" LOC = "N16" ; +NET "debug<28>" LOC = "R15" ; +NET "debug<29>" LOC = "P15" ; +NET "debug<30>" LOC = "N13" ; +NET "debug<31>" LOC = "N14" ; + +## ADC +NET "adc<11>" LOC = "B15" ; +NET "adc<10>" LOC = "A8" ; +NET "adc<9>" LOC = "B8" ; +NET "adc<8>" LOC = "C8" ; +NET "adc<7>" LOC = "D8" ; +NET "adc<6>" LOC = "C9" ; +NET "adc<5>" LOC = "A9" ; +NET "adc<4>" LOC = "C10" ; +NET "adc<3>" LOC = "D9" ; +NET "adc<2>" LOC = "A3" ; +NET "adc<1>" LOC = "B3" ; +NET "adc<0>" LOC = "A4" ; +NET "RXSYNC" LOC = "D10" ; + +## DAC +NET "TXBLANK" LOC = "K1" ; +NET "TXSYNC" LOC = "J2" ; +NET "dac<0>" LOC = "J1" ; +NET "dac<1>" LOC = "H3" ; +NET "dac<2>" LOC = "J3" ; +NET "dac<3>" LOC = "G2" ; +NET "dac<4>" LOC = "H1" ; +NET "dac<5>" LOC = "N3" ; +NET "dac<6>" LOC = "M4" ; +NET "dac<7>" LOC = "R1" ; +NET "dac<8>" LOC = "P2" ; +NET "dac<9>" LOC = "P1" ; +NET "dac<10>" LOC = "M1" ; +NET "dac<11>" LOC = "N1" ; +NET "dac<12>" LOC = "M3" ; +NET "dac<13>" LOC = "L4" ; + +## TX DB +NET "io_tx<0>" LOC = "K4" ; +NET "io_tx<1>" LOC = "L3" ; +NET "io_tx<2>" LOC = "L2" ; +NET "io_tx<3>" LOC = "F1" ; +NET "io_tx<4>" LOC = "F3" ; +NET "io_tx<5>" LOC = "G3" ; +NET "io_tx<6>" LOC = "E3" ; +NET "io_tx<7>" LOC = "E2" ; +NET "io_tx<8>" LOC = "E4" ; +NET "io_tx<9>" LOC = "F4" ; +NET "io_tx<10>" LOC = "D1" ; +NET "io_tx<11>" LOC = "E1" ; +NET "io_tx<12>" LOC = "D4" ; +NET "io_tx<13>" LOC = "D3" ; +NET "io_tx<14>" LOC = "C2" ; +NET "io_tx<15>" LOC = "C1" ; + +## RX DB +NET "io_rx<0>" LOC = "D7" ; +NET "io_rx<1>" LOC = "C6" ; +NET "io_rx<2>" LOC = "A6" ; +NET "io_rx<3>" LOC = "B6" ; +NET "io_rx<4>" LOC = "E9" ; +NET "io_rx<5>" LOC = "A7" ; +NET "io_rx<6>" LOC = "C7" ; +NET "io_rx<7>" LOC = "B10" ; +NET "io_rx<8>" LOC = "A10" ; +NET "io_rx<9>" LOC = "C11" ; +NET "io_rx<10>" LOC = "A11" ; +NET "io_rx<11>" LOC = "D11" ; +NET "io_rx<12>" LOC = "B12" ; +NET "io_rx<13>" LOC = "A12" ; +NET "io_rx<14>" LOC = "A14" ; +NET "io_rx<15>" LOC = "A13" ; + +## SPI +#NET "SEN_AUX" LOC = "C12" ; +#NET "SCLK_AUX" LOC = "D12" ; +#NET "MISO_AUX" LOC = "J5" ; +NET "SCLK_CODEC" LOC = "K3" ; +NET "SEN_CODEC" LOC = "D13" ; +NET "MOSI_CODEC" LOC = "C13" ; +NET "MISO_CODEC" LOC = "G4" ; + +NET "MISO_RX_DB" LOC = "E6" ; +NET "SEN_RX_DB" LOC = "B4" ; +NET "MOSI_RX_DB" LOC = "A5" ; +NET "SCLK_RX_DB" LOC = "C5" ; + +NET "MISO_TX_DB" LOC = "J4" ; +NET "SEN_TX_DB" LOC = "N2" ; +NET "MOSI_TX_DB" LOC = "L1" ; +NET "SCLK_TX_DB" LOC = "G1" ; + +## Dedicated pins +#NET "TMS" LOC = "B2" ; +#NET "TDO" LOC = "B16" ; +#NET "TDI" LOC = "B1" ; +#NET "TCK" LOC = "A15" ; + +##NET "fpga_cfg_prog_b" LOC = "A2" ; +##NET "fpga_cfg_done" LOC = "T15" ; diff --git a/fpga/usrp2/top/B100/u1plus.v b/fpga/usrp2/top/B100/u1plus.v new file mode 100644 index 000000000..5e3200580 --- /dev/null +++ b/fpga/usrp2/top/B100/u1plus.v @@ -0,0 +1,173 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module u1plus + (input CLK_FPGA_P, input CLK_FPGA_N, // Diff + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + output FPGA_TXD, input FPGA_RXD, + + // GPIF + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output [3:0] GPIF_RDY, + output FX2_PA7_FLAGD, output FX2_PA6_PKTEND, output FX2_PA2_SLOE, + input IFCLK, + + inout SDA_FPGA, inout SCL_FPGA, // I2C + + output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB, // DB TX SPI + output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, // DB TX SPI + output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC, // AD9862 main SPI + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + + inout [15:0] io_tx, inout [15:0] io_rx, + + output [13:0] dac, output TXSYNC, output TXBLANK, + input [11:0] adc, input RXSYNC, + + input PPS_IN, + input reset_n, output reset_codec + ); + + assign reset_codec = 1; // Believed to be active low + + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga, clk_fpga_in, reset; + + IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) + clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); + + reset_sync reset_sync(.clk(clk_fpga), .reset_in(~reset_n), .reset_out(reset)); + + // ///////////////////////////////////////////////////////////////////////// + // SPI + wire mosi, sclk, miso; + assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0; + assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) | + (~SEN_CODEC & MISO_CODEC); + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; + + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(dac[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(tx_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + // ///////////////////////////////////////////////////////////////////////// + // RX ADC -- handles deinterleaving + + reg [11:0] rx_i, rx_q; + wire [11:0] rx_a, rx_b; + + genvar j; + generate + for(j=0;j<12;j=j+1) + begin : gen_adcin + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_inst (.Q0(rx_a[j]), // 1-bit output captured with C0 clock + .Q1(rx_b[j]), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(adc[j]), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_adcin + endgenerate + + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_sync (.Q0(rxsync_0), // 1-bit output captured with C0 clock + .Q1(rxsync_1), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(RXSYNC), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + always @(posedge clk_fpga) + if(rxsync_0) + begin + rx_i <= rx_b; + rx_q <= rx_a; + end + else + begin + rx_i <= rx_a; + rx_q <= rx_b; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main U1E Core + u1plus_core u1p_c(.clk_fpga(clk_fpga), .rst_fpga(reset), + .debug_led(debug_led), .debug(debug), .debug_clk(debug_clk), + .debug_txd(FPGA_TXD), .debug_rxd(FPGA_RXD), + .gpif_d(GPIF_D), .gpif_ctl(GPIF_CTL), .gpif_rdy(GPIF_RDY), + .gpif_misc({FX2_PA7_FLAGD,FX2_PA6_PKTEND,FX2_PA2_SLOE}), + .gpif_clk(IFCLK), + + .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), + .sclk(sclk), .sen({SEN_CODEC,SEN_TX_DB,SEN_RX_DB}), .mosi(mosi), .miso(miso), + .cgen_st_status(cgen_st_status), .cgen_st_ld(cgen_st_ld),.cgen_st_refmon(cgen_st_refmon), + .cgen_sync_b(cgen_sync_b), .cgen_ref_sel(cgen_ref_sel), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + +endmodule // u1plus diff --git a/fpga/usrp2/top/B100/u1plus_core.v b/fpga/usrp2/top/B100/u1plus_core.v new file mode 100644 index 000000000..8a02f0fb8 --- /dev/null +++ b/fpga/usrp2/top/B100/u1plus_core.v @@ -0,0 +1,409 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + + +module u1plus_core + (input clk_fpga, input rst_fpga, + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + output debug_txd, input debug_rxd, + + // GPIF + inout [15:0] gpif_d, input [3:0] gpif_ctl, output [3:0] gpif_rdy, + output [2:0] gpif_misc, input gpif_clk, + + inout db_sda, inout db_scl, + output sclk, output [15:0] sen, output mosi, input miso, + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + output tx_underrun, output rx_overrun, + inout [15:0] io_tx, inout [15:0] io_rx, + output [13:0] tx_i, output [13:0] tx_q, + input [11:0] rx_i, input [11:0] rx_q, + input pps_in + ); + + localparam TXFIFOSIZE = 11; + localparam RXFIFOSIZE = 11; + + // 64 total regs in address space + localparam SR_RX_CTRL = 0; // 9 regs (+0 to +8) + localparam SR_RX_DSP = 16; // 7 regs (+0 to +6) + localparam SR_TX_CTRL = 24; // 6 regs (+0 to +5) + localparam SR_TX_DSP = 32; // 5 regs (+0 to +4) + localparam SR_TIME64 = 40; // 6 regs (+0 to +5) + localparam SR_CLEAR_RX_FIFO = 48; // 1 reg + localparam SR_CLEAR_TX_FIFO = 49; // 1 reg + localparam SR_GLOBAL_RESET = 50; // 1 reg + localparam SR_REG_TEST32 = 52; // 1 reg + + wire [7:0] COMPAT_NUM = 8'd3; + + wire wb_clk = clk_fpga; + wire wb_rst, global_reset; + + wire pps_int; + wire [63:0] vita_time, vita_time_pps; + reg [15:0] reg_leds, reg_cgen_ctrl, reg_test, xfer_rate; + wire [7:0] test_rate; + wire [3:0] test_ctrl; + + wire [7:0] set_addr; + wire [31:0] set_data; + wire set_stb; + + wire [31:0] debug0; + wire [31:0] debug1; + + wire [31:0] debug_vt; + wire gpif_rst; + + wire rx_overrun_dsp, rx_overrun_gpmc, tx_underrun_dsp, tx_underrun_gpmc; + reg [7:0] frames_per_packet; + + assign rx_overrun = rx_overrun_gpmc | rx_overrun_dsp; + assign tx_underrun = tx_underrun_gpmc | tx_underrun_dsp; + + setting_reg #(.my_addr(SR_GLOBAL_RESET), .width(1)) sr_reset + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(global_reset)); + + reset_sync reset_sync_wb(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(wb_rst)); + reset_sync reset_sync_gp(.clk(wb_clk), .reset_in(rst_fpga | global_reset), .reset_out(gpif_rst)); + wire [15:0] test_len; + + // ///////////////////////////////////////////////////////////////////////////////////// + // GPIF Slave to Wishbone Master + localparam dw = 16; + localparam aw = 11; + localparam sw = 2; + + wire [dw-1:0] m0_dat_mosi, m0_dat_miso; + wire [aw-1:0] m0_adr; + wire [sw-1:0] m0_sel; + wire m0_cyc, m0_stb, m0_we, m0_ack, m0_err, m0_rty; + + wire [31:0] debug_gpmc; + + wire [35:0] tx_data, rx_data, tx_err_data; + wire tx_src_rdy, tx_dst_rdy, rx_src_rdy, rx_dst_rdy, + tx_err_src_rdy, tx_err_dst_rdy; + + wire bus_error; + wire clear_tx, clear_rx; + + setting_reg #(.my_addr(SR_CLEAR_RX_FIFO), .width(1)) sr_clear_rx + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(clear_rx)); + + setting_reg #(.my_addr(SR_CLEAR_TX_FIFO), .width(1)) sr_clear_tx + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(),.changed(clear_tx)); + + gpif #(.TXFIFOSIZE(TXFIFOSIZE), .RXFIFOSIZE(RXFIFOSIZE)) + gpif (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(gpif_d), + .gpif_ctl(gpif_ctl), .gpif_rdy(gpif_rdy), .gpif_misc(gpif_misc), + + .wb_clk(wb_clk), .wb_rst(wb_rst), + .wb_adr_o(m0_adr), .wb_dat_mosi(m0_dat_mosi), .wb_dat_miso(m0_dat_miso), + .wb_sel_o(m0_sel), .wb_cyc_o(m0_cyc), .wb_stb_o(m0_stb), .wb_we_o(m0_we), + .wb_ack_i(m0_ack), .triggers(8'd0), + + .fifo_clk(wb_clk), .fifo_rst(wb_rst), .clear_tx(clear_tx), .clear_rx(clear_rx), + .tx_data_o(tx_data), .tx_src_rdy_o(tx_src_rdy), .tx_dst_rdy_i(tx_dst_rdy), + .rx_data_i(rx_data), .rx_src_rdy_i(rx_src_rdy), .rx_dst_rdy_o(rx_dst_rdy), + .tx_err_data_i(tx_err_data), .tx_err_src_rdy_i(tx_err_src_rdy), .tx_err_dst_rdy_o(tx_err_dst_rdy), + + .tx_underrun(tx_underrun_gpmc), .rx_overrun(rx_overrun_gpmc), + + .frames_per_packet(frames_per_packet), .test_len(test_len), .test_rate(test_rate), .test_ctrl(test_ctrl), + .debug0(debug0), .debug1(debug1)); + + // ///////////////////////////////////////////////////////////////////////// + // DSP RX + wire [31:0] sample_rx; + wire strobe_rx, run_rx; + wire [31:0] debug_rx_dsp, vr_debug; + + dsp_core_rx #(.BASE(SR_RX_DSP)) dsp_core_rx + (.clk(wb_clk),.rst(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .adc_a({rx_i,2'b0}),.adc_ovf_a(0),.adc_b({rx_q,2'b0}),.adc_ovf_b(0), + .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), + .debug(debug_rx_dsp) ); + + vita_rx_chain #(.BASE(SR_RX_CTRL), .UNIT(0), .FIFOSIZE(9), .PROT_ENG_FLAGS(0)) vita_rx_chain + (.clk(wb_clk),.reset(wb_rst),.clear(clear_rx), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time), .overrun(rx_overrun_dsp), + .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), + .rx_data_o(rx_data), .rx_dst_rdy_i(rx_dst_rdy), .rx_src_rdy_o(rx_src_rdy), + .debug(vr_debug) ); + + // /////////////////////////////////////////////////////////////////////////////////// + // DSP TX + + wire [15:0] tx_i_int, tx_q_int; + wire run_tx; + + vita_tx_chain #(.BASE_CTRL(SR_TX_CTRL), .BASE_DSP(SR_TX_DSP), + .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), + .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), + .DSP_NUMBER(0)) + vita_tx_chain + (.clk(wb_clk), .reset(wb_rst), + .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), + .vita_time(vita_time), + .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), + .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), + .dac_a(tx_i_int),.dac_b(tx_q_int), + .underrun(tx_underrun_dsp), .run(run_tx), + .debug(debug_vt)); + + assign tx_i = tx_i_int[15:2]; + assign tx_q = tx_q_int[15:2]; + + // ///////////////////////////////////////////////////////////////////////////////////// + // Wishbone Intercon, single master + wire [dw-1:0] s0_dat_mosi, s1_dat_mosi, s0_dat_miso, s1_dat_miso, s2_dat_mosi, s3_dat_mosi, s2_dat_miso, s3_dat_miso, + s4_dat_mosi, s5_dat_mosi, s4_dat_miso, s5_dat_miso, s6_dat_mosi, s7_dat_mosi, s6_dat_miso, s7_dat_miso, + s8_dat_mosi, s9_dat_mosi, s8_dat_miso, s9_dat_miso, sa_dat_mosi, sb_dat_mosi, sa_dat_miso, sb_dat_miso, + sc_dat_mosi, sd_dat_mosi, sc_dat_miso, sd_dat_miso, se_dat_mosi, sf_dat_mosi, se_dat_miso, sf_dat_miso; + wire [aw-1:0] s0_adr,s1_adr,s2_adr,s3_adr,s4_adr,s5_adr,s6_adr,s7_adr; + wire [aw-1:0] s8_adr,s9_adr,sa_adr,sb_adr,sc_adr, sd_adr, se_adr, sf_adr; + wire [sw-1:0] s0_sel,s1_sel,s2_sel,s3_sel,s4_sel,s5_sel,s6_sel,s7_sel; + wire [sw-1:0] s8_sel,s9_sel,sa_sel,sb_sel,sc_sel, sd_sel, se_sel, sf_sel; + wire s0_ack,s1_ack,s2_ack,s3_ack,s4_ack,s5_ack,s6_ack,s7_ack; + wire s8_ack,s9_ack,sa_ack,sb_ack,sc_ack, sd_ack, se_ack, sf_ack; + wire s0_stb,s1_stb,s2_stb,s3_stb,s4_stb,s5_stb,s6_stb,s7_stb; + wire s8_stb,s9_stb,sa_stb,sb_stb,sc_stb, sd_stb, se_stb, sf_stb; + wire s0_cyc,s1_cyc,s2_cyc,s3_cyc,s4_cyc,s5_cyc,s6_cyc,s7_cyc; + wire s8_cyc,s9_cyc,sa_cyc,sb_cyc,sc_cyc, sd_cyc, se_cyc, sf_cyc; + wire s0_we,s1_we,s2_we,s3_we,s4_we,s5_we,s6_we,s7_we; + wire s8_we,s9_we,sa_we,sb_we,sc_we,sd_we, se_we, sf_we; + + wb_1master #(.dw(dw), .aw(aw), .sw(sw), .decode_w(4), + .s0_addr(4'h0), .s0_mask(4'hF), .s1_addr(4'h1), .s1_mask(4'hF), + .s2_addr(4'h2), .s2_mask(4'hF), .s3_addr(4'h3), .s3_mask(4'hF), + .s4_addr(4'h4), .s4_mask(4'hF), .s5_addr(4'h5), .s5_mask(4'hF), + .s6_addr(4'h6), .s6_mask(4'hF), .s7_addr(4'h7), .s7_mask(4'hF), + .s8_addr(4'h8), .s8_mask(4'hE), .s9_addr(4'hf), .s9_mask(4'hF), // slave 8 is double wide + .sa_addr(4'ha), .sa_mask(4'hF), .sb_addr(4'hb), .sb_mask(4'hF), + .sc_addr(4'hc), .sc_mask(4'hF), .sd_addr(4'hd), .sd_mask(4'hF), + .se_addr(4'he), .se_mask(4'hF), .sf_addr(4'hf), .sf_mask(4'hF)) + wb_1master + (.clk_i(wb_clk),.rst_i(wb_rst), + .m0_dat_o(m0_dat_miso),.m0_ack_o(m0_ack),.m0_err_o(m0_err),.m0_rty_o(m0_rty),.m0_dat_i(m0_dat_mosi), + .m0_adr_i(m0_adr),.m0_sel_i(m0_sel),.m0_we_i(m0_we),.m0_cyc_i(m0_cyc),.m0_stb_i(m0_stb), + .s0_dat_o(s0_dat_mosi),.s0_adr_o(s0_adr),.s0_sel_o(s0_sel),.s0_we_o(s0_we),.s0_cyc_o(s0_cyc),.s0_stb_o(s0_stb), + .s0_dat_i(s0_dat_miso),.s0_ack_i(s0_ack),.s0_err_i(0),.s0_rty_i(0), + .s1_dat_o(s1_dat_mosi),.s1_adr_o(s1_adr),.s1_sel_o(s1_sel),.s1_we_o(s1_we),.s1_cyc_o(s1_cyc),.s1_stb_o(s1_stb), + .s1_dat_i(s1_dat_miso),.s1_ack_i(s1_ack),.s1_err_i(0),.s1_rty_i(0), + .s2_dat_o(s2_dat_mosi),.s2_adr_o(s2_adr),.s2_sel_o(s2_sel),.s2_we_o(s2_we),.s2_cyc_o(s2_cyc),.s2_stb_o(s2_stb), + .s2_dat_i(s2_dat_miso),.s2_ack_i(s2_ack),.s2_err_i(0),.s2_rty_i(0), + .s3_dat_o(s3_dat_mosi),.s3_adr_o(s3_adr),.s3_sel_o(s3_sel),.s3_we_o(s3_we),.s3_cyc_o(s3_cyc),.s3_stb_o(s3_stb), + .s3_dat_i(s3_dat_miso),.s3_ack_i(s3_ack),.s3_err_i(0),.s3_rty_i(0), + .s4_dat_o(s4_dat_mosi),.s4_adr_o(s4_adr),.s4_sel_o(s4_sel),.s4_we_o(s4_we),.s4_cyc_o(s4_cyc),.s4_stb_o(s4_stb), + .s4_dat_i(s4_dat_miso),.s4_ack_i(s4_ack),.s4_err_i(0),.s4_rty_i(0), + .s5_dat_o(s5_dat_mosi),.s5_adr_o(s5_adr),.s5_sel_o(s5_sel),.s5_we_o(s5_we),.s5_cyc_o(s5_cyc),.s5_stb_o(s5_stb), + .s5_dat_i(s5_dat_miso),.s5_ack_i(s5_ack),.s5_err_i(0),.s5_rty_i(0), + .s6_dat_o(s6_dat_mosi),.s6_adr_o(s6_adr),.s6_sel_o(s6_sel),.s6_we_o(s6_we),.s6_cyc_o(s6_cyc),.s6_stb_o(s6_stb), + .s6_dat_i(s6_dat_miso),.s6_ack_i(s6_ack),.s6_err_i(0),.s6_rty_i(0), + .s7_dat_o(s7_dat_mosi),.s7_adr_o(s7_adr),.s7_sel_o(s7_sel),.s7_we_o(s7_we),.s7_cyc_o(s7_cyc),.s7_stb_o(s7_stb), + .s7_dat_i(s7_dat_miso),.s7_ack_i(s7_ack),.s7_err_i(0),.s7_rty_i(0), + .s8_dat_o(s8_dat_mosi),.s8_adr_o(s8_adr),.s8_sel_o(s8_sel),.s8_we_o(s8_we),.s8_cyc_o(s8_cyc),.s8_stb_o(s8_stb), + .s8_dat_i(s8_dat_miso),.s8_ack_i(s8_ack),.s8_err_i(0),.s8_rty_i(0), + .s9_dat_o(s9_dat_mosi),.s9_adr_o(s9_adr),.s9_sel_o(s9_sel),.s9_we_o(s9_we),.s9_cyc_o(s9_cyc),.s9_stb_o(s9_stb), + .s9_dat_i(s9_dat_miso),.s9_ack_i(s9_ack),.s9_err_i(0),.s9_rty_i(0), + .sa_dat_o(sa_dat_mosi),.sa_adr_o(sa_adr),.sa_sel_o(sa_sel),.sa_we_o(sa_we),.sa_cyc_o(sa_cyc),.sa_stb_o(sa_stb), + .sa_dat_i(sa_dat_miso),.sa_ack_i(sa_ack),.sa_err_i(0),.sa_rty_i(0), + .sb_dat_o(sb_dat_mosi),.sb_adr_o(sb_adr),.sb_sel_o(sb_sel),.sb_we_o(sb_we),.sb_cyc_o(sb_cyc),.sb_stb_o(sb_stb), + .sb_dat_i(sb_dat_miso),.sb_ack_i(sb_ack),.sb_err_i(0),.sb_rty_i(0), + .sc_dat_o(sc_dat_mosi),.sc_adr_o(sc_adr),.sc_sel_o(sc_sel),.sc_we_o(sc_we),.sc_cyc_o(sc_cyc),.sc_stb_o(sc_stb), + .sc_dat_i(sc_dat_miso),.sc_ack_i(sc_ack),.sc_err_i(0),.sc_rty_i(0), + .sd_dat_o(sd_dat_mosi),.sd_adr_o(sd_adr),.sd_sel_o(sd_sel),.sd_we_o(sd_we),.sd_cyc_o(sd_cyc),.sd_stb_o(sd_stb), + .sd_dat_i(sd_dat_miso),.sd_ack_i(sd_ack),.sd_err_i(0),.sd_rty_i(0), + .se_dat_o(se_dat_mosi),.se_adr_o(se_adr),.se_sel_o(se_sel),.se_we_o(se_we),.se_cyc_o(se_cyc),.se_stb_o(se_stb), + .se_dat_i(se_dat_miso),.se_ack_i(se_ack),.se_err_i(0),.se_rty_i(0), + .sf_dat_o(sf_dat_mosi),.sf_adr_o(sf_adr),.sf_sel_o(sf_sel),.sf_we_o(sf_we),.sf_cyc_o(sf_cyc),.sf_stb_o(sf_stb), + .sf_dat_i(sf_dat_miso),.sf_ack_i(sf_ack),.sf_err_i(0),.sf_rty_i(0) ); + + assign s5_ack = 0; assign s9_ack = 0; assign sa_ack = 0; assign sb_ack = 0; + assign sc_ack = 0; assign sd_ack = 0; assign se_ack = 0; assign sf_ack = 0; + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 0, Misc LEDs, Switches, controls + + localparam REG_LEDS = 7'd0; // out + localparam REG_CGEN_CTRL = 7'd4; // out + localparam REG_CGEN_ST = 7'd6; // in + localparam REG_TEST = 7'd8; // out + localparam REG_RX_FRAMELEN = 7'd10; // in + localparam REG_TX_FRAMELEN = 7'd12; // out + localparam REG_XFER_RATE = 7'd14; // out + localparam REG_COMPAT = 7'd16; // in + + always @(posedge wb_clk) + if(wb_rst) + begin + reg_leds <= 0; + reg_cgen_ctrl <= 2'b11; + reg_test <= 0; + xfer_rate <= 0; + frames_per_packet <= 0; + end + else + if(s0_cyc & s0_stb & s0_we) + case(s0_adr[6:0]) + REG_LEDS : + reg_leds <= s0_dat_mosi; + REG_CGEN_CTRL : + reg_cgen_ctrl <= s0_dat_mosi; + REG_TEST : + reg_test <= s0_dat_mosi; + REG_RX_FRAMELEN : + frames_per_packet <= s0_dat_mosi[7:0]; + REG_XFER_RATE : + xfer_rate <= s0_dat_mosi; + endcase // case (s0_adr[6:0]) + + assign test_ctrl = xfer_rate[11:8]; + assign test_rate = xfer_rate[7:0]; + assign test_len = reg_test[15:0]; + + assign { debug_led[2],debug_led[0],debug_led[1] } = reg_leds; // LEDs are arranged funny on board + assign { cgen_sync_b, cgen_ref_sel } = reg_cgen_ctrl; + + assign s0_dat_miso = (s0_adr[6:0] == REG_LEDS) ? reg_leds : + (s0_adr[6:0] == REG_CGEN_CTRL) ? reg_cgen_ctrl : + (s0_adr[6:0] == REG_CGEN_ST) ? {13'b0,cgen_st_status,cgen_st_ld,cgen_st_refmon} : + (s0_adr[6:0] == REG_TEST) ? reg_test : + (s0_adr[6:0] == REG_COMPAT) ? { 8'd0, COMPAT_NUM } : + 16'hBEEF; + + assign s0_ack = s0_stb & s0_cyc; + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 1, UART + // depth of 3 is 128 entries, clkdiv of 278 gives 230.4k with a 64 MHz system clock + + simple_uart #(.TXDEPTH(3),.RXDEPTH(3), .CLKDIV_DEFAULT(278)) uart + (.clk_i(wb_clk),.rst_i(wb_rst), + .we_i(s1_we),.stb_i(s1_stb),.cyc_i(s1_cyc),.ack_o(s1_ack), + .adr_i(s1_adr[3:1]),.dat_i({16'd0,s1_dat_mosi}),.dat_o(s1_dat_miso), + .rx_int_o(),.tx_int_o(), + .tx_o(debug_txd),.rx_i(debug_rxd),.baud_o()); + + // ///////////////////////////////////////////////////////////////////////////////////// + // Slave 2, SPI + + spi_top16 shared_spi + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.wb_adr_i(s2_adr[4:0]),.wb_dat_i(s2_dat_mosi), + .wb_dat_o(s2_dat_miso),.wb_sel_i(s2_sel),.wb_we_i(s2_we),.wb_stb_i(s2_stb), + .wb_cyc_i(s2_cyc),.wb_ack_o(s2_ack),.wb_err_o(),.wb_int_o(), + .ss_pad_o(sen), .sclk_pad_o(sclk), .mosi_pad_o(mosi), .miso_pad_i(miso) ); + + // ///////////////////////////////////////////////////////////////////////// + // Slave 3, I2C + + wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; + i2c_master_top #(.ARST_LVL(1)) i2c + (.wb_clk_i(wb_clk),.wb_rst_i(wb_rst),.arst_i(1'b0), + .wb_adr_i(s3_adr[3:1]),.wb_dat_i(s3_dat_mosi[7:0]),.wb_dat_o(s3_dat_miso[7:0]), + .wb_we_i(s3_we),.wb_stb_i(s3_stb),.wb_cyc_i(s3_cyc), + .wb_ack_o(s3_ack),.wb_inta_o(), + .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), + .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); + + assign s3_dat_miso[15:8] = 8'd0; + + // I2C -- Don't use external transistors for open drain, the FPGA implements this + IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); + IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); + + // ///////////////////////////////////////////////////////////////////////// + // GPIOs -- Slave #4 + + wire [31:0] atr_lines; + wire [31:0] debug_gpio_0, debug_gpio_1; + + nsgpio16LE + nsgpio16LE(.clk_i(wb_clk),.rst_i(wb_rst), + .cyc_i(s4_cyc),.stb_i(s4_stb),.adr_i(s4_adr[3:0]),.we_i(s4_we), + .dat_i(s4_dat_mosi),.dat_o(s4_dat_miso),.ack_o(s4_ack), + .atr(atr_lines),.debug_0(debug_gpio_0),.debug_1(debug_gpio_1), + .gpio( {io_tx,io_rx} ) ); + + // ///////////////////////////////////////////////////////////////////////// + // Settings Bus -- Slave #8 + 9 + + // only have 64 regs, 32 bits each with current setup... + settings_bus_16LE #(.AWIDTH(11),.RWIDTH(6)) settings_bus_16LE + (.wb_clk(wb_clk),.wb_rst(wb_rst),.wb_adr_i(s8_adr[10:0]),.wb_dat_i(s8_dat_mosi), + .wb_stb_i(s8_stb),.wb_we_i(s8_we),.wb_ack_o(s8_ack), + .strobe(set_stb),.addr(set_addr),.data(set_data) ); + + // ///////////////////////////////////////////////////////////////////////// + // ATR Controller -- Slave #6 + + atr_controller16 atr_controller16 + (.clk_i(wb_clk), .rst_i(wb_rst), + .adr_i(s6_adr[5:0]), .sel_i(s6_sel), .dat_i(s6_dat_mosi), .dat_o(s6_dat_miso), + .we_i(s6_we), .stb_i(s6_stb), .cyc_i(s6_cyc), .ack_o(s6_ack), + .run_rx(run_rx), .run_tx(run_tx), .ctrl_lines(atr_lines)); + + // ///////////////////////////////////////////////////////////////////////// + // Readback mux 32 -- Slave #7 + + wire [31:0] reg_test32; + + setting_reg #(.my_addr(SR_REG_TEST32)) sr_reg_test32 + (.clk(wb_clk),.rst(wb_rst),.strobe(set_stb),.addr(set_addr), + .in(set_data),.out(reg_test32),.changed()); + + wb_readback_mux_16LE readback_mux_32 + (.wb_clk_i(wb_clk), .wb_rst_i(wb_rst), .wb_stb_i(s7_stb), + .wb_adr_i({5'b0,s7_adr}), .wb_dat_o(s7_dat_miso), .wb_ack_o(s7_ack), + + .word00(vita_time[63:32]), .word01(vita_time[31:0]), + .word02(vita_time_pps[63:32]), .word03(vita_time_pps[31:0]), + .word04(reg_test32), .word05(32'b0), + .word06(32'b0), .word07(32'b0), + .word08(32'b0), .word09(32'b0), + .word10(32'b0), .word11(32'b0), + .word12(32'b0), .word13(32'b0), + .word14(32'b0), .word15(32'b0) + ); + + // ///////////////////////////////////////////////////////////////////////// + // VITA Timing + + time_64bit #(.TICKS_PER_SEC(32'd64000000),.BASE(SR_TIME64)) time_64bit + (.clk(wb_clk), .rst(wb_rst), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), + .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .pps_int(pps_int), + .exp_time_in(0)); + + // ///////////////////////////////////////////////////////////////////////////////////// + // Debug circuitry + + assign debug_clk = { gpif_clk, clk_fpga }; + assign debug = debug0; + assign debug_gpio_0 = 0; + assign debug_gpio_1 = 0; + //assign {io_tx,io_rx} = {debug1}; + +endmodule // u1plus_core |