diff options
Diffstat (limited to 'fpga/usrp2/top/B100/B100.v')
-rw-r--r-- | fpga/usrp2/top/B100/B100.v | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/fpga/usrp2/top/B100/B100.v b/fpga/usrp2/top/B100/B100.v new file mode 100644 index 000000000..59bed6066 --- /dev/null +++ b/fpga/usrp2/top/B100/B100.v @@ -0,0 +1,218 @@ +// +// Copyright 2011-2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +`timescale 1ns / 1ps +////////////////////////////////////////////////////////////////////////////////// + +module B100 + (input CLK_FPGA_P, input CLK_FPGA_N, // Diff + output [2:0] debug_led, output [31:0] debug, output [1:0] debug_clk, + + // GPIF + inout [15:0] GPIF_D, input [3:0] GPIF_CTL, output GPIF_SLOE, + output [1:0] GPIF_ADR, output GPIF_SLWR, output GPIF_SLRD, output GPIF_PKTEND, + input IFCLK, + + inout SDA_FPGA, inout SCL_FPGA, // I2C + + output SCLK_TX_DB, output SEN_TX_DB, output MOSI_TX_DB, input MISO_TX_DB, // DB TX SPI + output SCLK_RX_DB, output SEN_RX_DB, output MOSI_RX_DB, input MISO_RX_DB, // DB TX SPI + output SCLK_CODEC, output SEN_CODEC, output MOSI_CODEC, input MISO_CODEC, // AD9862 main SPI + + input cgen_st_status, input cgen_st_ld, input cgen_st_refmon, output cgen_sync_b, output cgen_ref_sel, + + inout [15:0] io_tx, inout [15:0] io_rx, + + output [13:0] dac, output TXSYNC, output TXBLANK, + input [11:0] adc, input RXSYNC, + + input PPS_IN, + input reset_n, output reset_codec, + input ext_reset + ); + + assign reset_codec = 1; // Believed to be active low + + // ///////////////////////////////////////////////////////////////////////// + // Clocking + wire clk_fpga, clk_fpga_in, reset; + wire gpif_clk = IFCLK; + wire gpif_rst; + + IBUFGDS #(.IOSTANDARD("LVDS_33"), .DIFF_TERM("TRUE")) + clk_fpga_pin (.O(clk_fpga_in),.I(CLK_FPGA_P),.IB(CLK_FPGA_N)); + + BUFG clk_fpga_BUFG (.I(clk_fpga_in), .O(clk_fpga)); + + reset_sync reset_sync(.clk(clk_fpga), .reset_in((~reset_n) | (~ext_reset)), .reset_out(reset)); + reset_sync reset_sync_gpif(.clk(gpif_clk), .reset_in((~reset_n) | (~ext_reset)), .reset_out(gpif_rst)); + + // ///////////////////////////////////////////////////////////////////////// + // SPI + wire mosi, sclk, miso; + assign { SCLK_TX_DB, MOSI_TX_DB } = ~SEN_TX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_RX_DB, MOSI_RX_DB } = ~SEN_RX_DB ? {sclk,mosi} : 2'b0; + assign { SCLK_CODEC, MOSI_CODEC } = ~SEN_CODEC ? {sclk,mosi} : 2'b0; + assign miso = (~SEN_TX_DB & MISO_TX_DB) | (~SEN_RX_DB & MISO_RX_DB) | + (~SEN_CODEC & MISO_CODEC); + + // ///////////////////////////////////////////////////////////////////////// + // TX DAC -- handle the interleaved data bus to DAC, with clock doubling DLL + + assign TXBLANK = 0; + wire [13:0] tx_i, tx_q; + + genvar i; + generate + for(i=0;i<14;i=i+1) + begin : gen_dacout + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_inst (.Q(dac[i]), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(tx_i[i]), // 1-bit data input (associated with C0) + .D1(tx_q[i]), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_dacout + endgenerate + ODDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT(1'b0), // Sets initial state of the Q output to 1'b0 or 1'b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + ODDR2_txsnc (.Q(TXSYNC), // 1-bit DDR output data + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D0(1'b0), // 1-bit data input (associated with C0) + .D1(1'b1), // 1-bit data input (associated with C1) + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + // ///////////////////////////////////////////////////////////////////////// + // RX ADC -- handles deinterleaving + + wire rxsync_0, rxsync_1; + reg [11:0] rx_i, rx_q; + wire [11:0] rx_a, rx_b; + + genvar j; + generate + for(j=0;j<12;j=j+1) + begin : gen_adcin + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_inst (.Q0(rx_a[j]), // 1-bit output captured with C0 clock + .Q1(rx_b[j]), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(adc[j]), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + end // block: gen_adcin + endgenerate + + IDDR2 #(.DDR_ALIGNMENT("NONE"), // Sets output alignment to "NONE", "C0" or "C1" + .INIT_Q0(1'b0), // Sets initial state of the Q0 output to 1’b0 or 1’b1 + .INIT_Q1(1'b0), // Sets initial state of the Q1 output to 1’b0 or 1’b1 + .SRTYPE("SYNC")) // Specifies "SYNC" or "ASYNC" set/reset + IDDR2_sync (.Q0(rxsync_0), // 1-bit output captured with C0 clock + .Q1(rxsync_1), // 1-bit output captured with C1 clock + .C0(clk_fpga), // 1-bit clock input + .C1(~clk_fpga), // 1-bit clock input + .CE(1'b1), // 1-bit clock enable input + .D(RXSYNC), // 1-bit DDR data input + .R(1'b0), // 1-bit reset input + .S(1'b0)); // 1-bit set input + + always @(posedge clk_fpga) + if(rxsync_0) + begin + rx_i <= rx_b; + rx_q <= rx_a; + end + else + begin + rx_i <= rx_a; + rx_q <= rx_b; + end + + // ///////////////////////////////////////////////////////////////////////// + // Main Core + wire [35:0] rx_data, tx_data, ctrl_data, resp_data; + wire rx_src_rdy, rx_dst_rdy, tx_src_rdy, tx_dst_rdy, resp_src_rdy, resp_dst_rdy, ctrl_src_rdy, ctrl_dst_rdy; + wire dsp_rx_run, dsp_tx_run; + wire [7:0] sen8; + assign {SEN_CODEC,SEN_TX_DB,SEN_RX_DB} = sen8[2:0]; + wire [31:0] core_debug; + + assign debug_led = {dsp_tx_run, dsp_rx_run, cgen_st_ld}; + wire cgen_sync; + assign { cgen_sync_b, cgen_ref_sel } = {~cgen_sync, 1'b1}; + + u1plus_core #( +`ifdef NUM_RX_DSP + .NUM_RX_DSPS(`NUM_RX_DSP), +`else + .NUM_RX_DSPS(1), +`endif + .DSP_RX_XTRA_FIFOSIZE(11), + .DSP_TX_XTRA_FIFOSIZE(12), + .USE_PACKET_PADDER(1) + ) core( + .clk(clk_fpga), .reset(reset), + .debug(core_debug), .debug_clk(debug_clk), + + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .dsp_rx_run(dsp_rx_run), .dsp_tx_run(dsp_tx_run), + .clock_sync(cgen_sync), + + .db_sda(SDA_FPGA), .db_scl(SCL_FPGA), + .sclk(sclk), .sen(sen8), .mosi(mosi), .miso(miso), + .io_tx(io_tx), .io_rx(io_rx), + .tx_i(tx_i), .tx_q(tx_q), + .rx_i(rx_i), .rx_q(rx_q), + .pps_in(PPS_IN) ); + + // ///////////////////////////////////////////////////////////////////////// + // Interface from host to/from GPIF + wire [31:0] gpif_debug; + slave_fifo slave_fifo (.gpif_clk(gpif_clk), .gpif_rst(gpif_rst), .gpif_d(GPIF_D), + .gpif_ctl(GPIF_CTL), .sloe(GPIF_SLOE), .slwr(GPIF_SLWR), .slrd(GPIF_SLRD), + .pktend(GPIF_PKTEND), .fifoadr(GPIF_ADR), + + .fifo_clk(clk_fpga), .fifo_rst(reset), + .rx_data(rx_data), .rx_src_rdy(rx_src_rdy), .rx_dst_rdy(rx_dst_rdy), + .tx_data(tx_data), .tx_src_rdy(tx_src_rdy), .tx_dst_rdy(tx_dst_rdy), + .ctrl_data(ctrl_data), .ctrl_src_rdy(ctrl_src_rdy), .ctrl_dst_rdy(ctrl_dst_rdy), + .resp_data(resp_data), .resp_src_rdy(resp_src_rdy), .resp_dst_rdy(resp_dst_rdy), + + .debug(gpif_debug)); + + //assign debug = gpif_debug; + assign debug = core_debug; + +endmodule // B100 |