diff options
Diffstat (limited to 'fpga/usrp2/simple_gemac/simple_gemac_tb.v')
| -rw-r--r-- | fpga/usrp2/simple_gemac/simple_gemac_tb.v | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/fpga/usrp2/simple_gemac/simple_gemac_tb.v b/fpga/usrp2/simple_gemac/simple_gemac_tb.v new file mode 100644 index 000000000..ed7d796dc --- /dev/null +++ b/fpga/usrp2/simple_gemac/simple_gemac_tb.v @@ -0,0 +1,217 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + + +module simple_gemac_tb; +`include "eth_tasks.v" + + reg clk = 0; + reg reset = 1; + + initial #1000 reset = 0; + always #50 clk = ~clk; + + wire GMII_RX_DV, GMII_RX_ER, GMII_TX_EN, GMII_TX_ER, GMII_GTX_CLK; + wire [7:0] GMII_RXD, GMII_TXD; + + wire rx_valid, rx_error, rx_ack; + wire tx_ack, tx_valid, tx_error; + + wire [7:0] rx_data, tx_data; + + reg [15:0] pause_time; + reg pause_req = 0; + + wire GMII_RX_CLK = GMII_GTX_CLK; + + reg [7:0] FORCE_DAT_ERR = 0; + reg FORCE_ERR = 0; + + // Loopback + assign GMII_RX_DV = GMII_TX_EN; + assign GMII_RX_ER = GMII_TX_ER | FORCE_ERR; + assign GMII_RXD = GMII_TXD ^ FORCE_DAT_ERR; + + wire [47:0] ucast_addr = 48'hF1F2_F3F4_F5F6; + wire [47:0] mcast_addr = 0; + wire pass_ucast =1, pass_mcast=0, pass_bcast=1, pass_pause=0, pass_all=0; + + simple_gemac simple_gemac + (.clk125(clk), .reset(reset), + .GMII_GTX_CLK(GMII_GTX_CLK), .GMII_TX_EN(GMII_TX_EN), + .GMII_TX_ER(GMII_TX_ER), .GMII_TXD(GMII_TXD), + .GMII_RX_CLK(GMII_RX_CLK), .GMII_RX_DV(GMII_RX_DV), + .GMII_RX_ER(GMII_RX_ER), .GMII_RXD(GMII_RXD), + .pause_req(pause_req), .pause_time(pause_time), .pause_en(1), + .ucast_addr(ucast_addr), .mcast_addr(mcast_addr), + .pass_ucast(pass_ucast), .pass_mcast(pass_mcast), .pass_bcast(pass_bcast), + .pass_pause(pass_pause), .pass_all(pass_all), + .rx_clk(rx_clk), .rx_data(rx_data), + .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack), + .tx_clk(tx_clk), .tx_data(tx_data), + .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack) + ); + + wire rx_ll_sof, rx_ll_eof, rx_ll_src_rdy, rx_ll_dst_rdy; + wire rx_ll_sof2, rx_ll_eof2, rx_ll_src_rdy2; + reg rx_ll_dst_rdy2 = 1; + wire [7:0] rx_ll_data, rx_ll_data2; + wire rx_ll_error, rx_ll_error2; + + rxmac_to_ll8 rx_adapt + (.clk(clk), .reset(reset), .clear(0), + .rx_data(rx_data), .rx_valid(rx_valid), .rx_error(rx_error), .rx_ack(rx_ack), + .ll_data(rx_ll_data), .ll_sof(rx_ll_sof), .ll_eof(rx_ll_eof), .ll_error(rx_ll_error), + .ll_src_rdy(rx_ll_src_rdy), .ll_dst_rdy(rx_ll_dst_rdy)); + + ll8_shortfifo rx_sfifo + (.clk(clk), .reset(reset), .clear(0), + .datain(rx_ll_data), .sof_i(rx_ll_sof), .eof_i(rx_ll_eof), + .error_i(rx_ll_error), .src_rdy_i(rx_ll_src_rdy), .dst_rdy_o(rx_ll_dst_rdy), + .dataout(rx_ll_data2), .sof_o(rx_ll_sof2), .eof_o(rx_ll_eof2), + .error_o(rx_ll_error2), .src_rdy_o(rx_ll_src_rdy2), .dst_rdy_i(rx_ll_dst_rdy2)); + + wire tx_ll_sof, tx_ll_eof, tx_ll_src_rdy, tx_ll_dst_rdy; + reg tx_ll_sof2=0, tx_ll_eof2=0; + reg tx_ll_src_rdy2 = 0; + wire tx_ll_dst_rdy2; + wire [7:0] tx_ll_data; + reg [7:0] tx_ll_data2 = 0; + wire tx_ll_error; + wire tx_ll_error2 = 0; + + ll8_shortfifo tx_sfifo + (.clk(clk), .reset(reset), .clear(clear), + .datain(tx_ll_data2), .sof_i(tx_ll_sof2), .eof_i(tx_ll_eof2), + .error_i(tx_ll_error2), .src_rdy_i(tx_ll_src_rdy2), .dst_rdy_o(tx_ll_dst_rdy2), + .dataout(tx_ll_data), .sof_o(tx_ll_sof), .eof_o(tx_ll_eof), + .error_o(tx_ll_error), .src_rdy_o(tx_ll_src_rdy), .dst_rdy_i(tx_ll_dst_rdy)); + + ll8_to_txmac ll8_to_txmac + (.clk(clk), .reset(reset), .clear(clear), + .ll_data(tx_ll_data), .ll_sof(tx_ll_sof), .ll_eof(tx_ll_eof), + .ll_src_rdy(tx_ll_src_rdy), .ll_dst_rdy(tx_ll_dst_rdy), + .tx_data(tx_data), .tx_valid(tx_valid), .tx_error(tx_error), .tx_ack(tx_ack)); + + initial $dumpfile("simple_gemac_tb.vcd"); + initial $dumpvars(0,simple_gemac_tb); + + integer i; + reg [7:0] pkt_rom[0:65535]; + reg [1023:0] ROMFile; + + initial + for (i=0;i<65536;i=i+1) + pkt_rom[i] <= 8'h0; + + initial + begin + @(negedge reset); + repeat (10) + @(posedge clk); + SendFlowCtrl(16'h0007); // Send flow control + @(posedge clk); + #30000; + @(posedge clk); + SendFlowCtrl(16'h0009); // Increas flow control before it expires + #10000; + @(posedge clk); + SendFlowCtrl(16'h0000); // Cancel flow control before it expires + @(posedge clk); + + SendPacket_to_ll8(8'hAA,10); // This packet gets dropped by the filters + repeat (10) + @(posedge clk); + + SendPacketFromFile_ll8(60,0,0); // The rest are valid packets + repeat (10) + @(posedge clk); + + SendPacketFromFile_ll8(61,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_ll8(62,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_ll8(63,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_ll8(64,0,0); + repeat (10) + @(posedge clk); + SendPacketFromFile_ll8(59,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_ll8(58,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_ll8(100,0,0); + repeat (1) + @(posedge clk); + SendPacketFromFile_ll8(200,150,30); // waiting 14 empties the fifo, 15 underruns + repeat (1) + @(posedge clk); + SendPacketFromFile_ll8(100,0,30); + #10000 $finish; + end + + // Force a CRC error + initial + begin + #90000; + @(posedge clk); + FORCE_DAT_ERR <= 8'h10; + @(posedge clk); + FORCE_DAT_ERR <= 8'h00; + end + + // Force an RX_ER error (i.e. link loss) + initial + begin + #116000; + @(posedge clk); + FORCE_ERR <= 1; + @(posedge clk); + FORCE_ERR <= 0; + end + + // Cause receive fifo to fill, causing an RX overrun + initial + begin + #126000; + @(posedge clk); + rx_ll_dst_rdy2 <= 0; + repeat (30) // Repeat of 14 fills the shortfifo, but works. 15 overflows + @(posedge clk); + rx_ll_dst_rdy2 <= 1; + end + + // Tests: Send and recv flow control, send and receive good packets, RX CRC err, RX_ER, RX overrun, TX underrun + // Still need to test: CRC errors on Pause Frames + + always @(posedge clk) + if(rx_ll_src_rdy2 & rx_ll_dst_rdy2) + begin + if(rx_ll_sof2 & ~rx_ll_eof2) + $display("RX-PKT-START %d",$time); + $display("RX-PKT SOF %d EOF %d ERR%d DAT %x",rx_ll_sof2,rx_ll_eof2,rx_ll_error2,rx_ll_data2); + if(rx_ll_eof2 & ~rx_ll_sof2) + $display("RX-PKT-END %d",$time); + end + +endmodule // simple_gemac_tb |