diff options
Diffstat (limited to 'fpga/usrp2/simple_gemac/flow_ctrl_tx.v')
-rw-r--r-- | fpga/usrp2/simple_gemac/flow_ctrl_tx.v | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/fpga/usrp2/simple_gemac/flow_ctrl_tx.v b/fpga/usrp2/simple_gemac/flow_ctrl_tx.v new file mode 100644 index 000000000..bdc1e4701 --- /dev/null +++ b/fpga/usrp2/simple_gemac/flow_ctrl_tx.v @@ -0,0 +1,56 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + +
+// TX side of flow control -- when other side sends PAUSE, we wait
+
+module flow_ctrl_tx
+ (input rst,
+ input tx_clk,
+ //host processor
+ input tx_pause_en,
+ // From MAC_rx_ctrl
+ input [15:0] pause_quanta,
+ input pause_quanta_val,
+ // MAC_tx_ctrl
+ output pause_apply,
+ input paused);
+
+ // ******************************************************************************
+ // Inhibit our TX from transmitting because they sent us a PAUSE frame
+ // ******************************************************************************
+
+ // Pauses are in units of 512 bit times, or 64 bytes/clock cycles, and can be
+ // as big as 16 bits, so 22 bits are needed for the counter
+
+ reg [15+6:0] pause_quanta_counter;
+ reg pqval_d1, pqval_d2;
+
+ always @(posedge tx_clk) pqval_d1 <= pause_quanta_val;
+ always @(posedge tx_clk) pqval_d2 <= pqval_d1;
+
+ always @ (posedge tx_clk or posedge rst)
+ if (rst)
+ pause_quanta_counter <= 0;
+ else if (pqval_d1 & ~pqval_d2)
+ pause_quanta_counter <= {pause_quanta, 6'b0};
+ else if((pause_quanta_counter!=0) & paused)
+ pause_quanta_counter <= pause_quanta_counter - 1;
+
+ assign pause_apply = tx_pause_en & (pause_quanta_counter != 0);
+
+endmodule // flow_ctrl
|