aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp2/sdr_lib
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2/sdr_lib')
-rw-r--r--fpga/usrp2/sdr_lib/Makefile.srcs9
-rw-r--r--fpga/usrp2/sdr_lib/cordic_z24.v2
-rw-r--r--fpga/usrp2/sdr_lib/ddc_chain.v190
-rw-r--r--fpga/usrp2/sdr_lib/dsp_core_rx.v144
-rw-r--r--fpga/usrp2/sdr_lib/dsp_core_rx_old.v200
-rw-r--r--fpga/usrp2/sdr_lib/dsp_core_rx_tb.v10
-rw-r--r--fpga/usrp2/sdr_lib/dsp_core_rx_udp.v200
-rw-r--r--fpga/usrp2/sdr_lib/dsp_rx_glue.v98
-rw-r--r--fpga/usrp2/sdr_lib/dsp_tx_glue.v98
-rw-r--r--fpga/usrp2/sdr_lib/dspengine_16to8.v38
-rw-r--r--fpga/usrp2/sdr_lib/dspengine_8to16.v203
-rw-r--r--fpga/usrp2/sdr_lib/duc_chain.v (renamed from fpga/usrp2/sdr_lib/dsp_core_tx.v)74
-rw-r--r--fpga/usrp2/sdr_lib/dummy_rx.v2
13 files changed, 658 insertions, 610 deletions
diff --git a/fpga/usrp2/sdr_lib/Makefile.srcs b/fpga/usrp2/sdr_lib/Makefile.srcs
index 629b92cc8..e6c4c5343 100644
--- a/fpga/usrp2/sdr_lib/Makefile.srcs
+++ b/fpga/usrp2/sdr_lib/Makefile.srcs
@@ -1,5 +1,5 @@
#
-# Copyright 2010 Ettus Research LLC
+# Copyright 2010-2012 Ettus Research LLC
#
##################################################
@@ -23,9 +23,10 @@ clip_reg.v \
cordic.v \
cordic_z24.v \
cordic_stage.v \
-dsp_core_rx.v \
-dsp_core_tx.v \
+ddc_chain.v \
+duc_chain.v \
dspengine_16to8.v \
+dspengine_8to16.v \
hb_dec.v \
hb_interp.v \
pipectrl.v \
@@ -39,4 +40,6 @@ sign_extend.v \
small_hb_dec.v \
small_hb_int.v \
tx_frontend.v \
+dsp_tx_glue.v \
+dsp_rx_glue.v \
))
diff --git a/fpga/usrp2/sdr_lib/cordic_z24.v b/fpga/usrp2/sdr_lib/cordic_z24.v
index 97b7beaf7..51b074a33 100644
--- a/fpga/usrp2/sdr_lib/cordic_z24.v
+++ b/fpga/usrp2/sdr_lib/cordic_z24.v
@@ -119,8 +119,6 @@ module cordic_z24(clock, reset, enable, xi, yi, zi, xo, yo, zo );
assign xo = x20[bitwidth:1];
assign yo = y20[bitwidth:1];
assign zo = z20;
- //assign xo = x20[bitwidth+1:2]; // CORDIC gain is ~1.6, plus gain from rotating vectors
- //assign yo = y20[bitwidth+1:2];
endmodule // cordic
diff --git a/fpga/usrp2/sdr_lib/ddc_chain.v b/fpga/usrp2/sdr_lib/ddc_chain.v
new file mode 100644
index 000000000..c32c9f491
--- /dev/null
+++ b/fpga/usrp2/sdr_lib/ddc_chain.v
@@ -0,0 +1,190 @@
+//
+// Copyright 2011-2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+//! The USRP digital down-conversion chain
+
+module ddc_chain
+ #(
+ parameter BASE = 0,
+ parameter DSPNO = 0,
+ parameter WIDTH = 24
+ )
+ (input clk, input rst, input clr,
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+ input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user,
+
+ // From RX frontend
+ input [WIDTH-1:0] rx_fe_i,
+ input [WIDTH-1:0] rx_fe_q,
+
+ // To RX control
+ output [31:0] sample,
+ input run,
+ output strobe,
+ output [31:0] debug
+ );
+
+ localparam cwidth = 25;
+ localparam zwidth = 24;
+
+ wire ddc_enb;
+ wire [31:0] phase_inc;
+ reg [31:0] phase;
+
+ wire [17:0] scale_factor;
+ wire [cwidth-1:0] i_cordic, q_cordic;
+ wire [WIDTH-1:0] i_cordic_clip, q_cordic_clip;
+ wire [WIDTH-1:0] i_cic, q_cic;
+ wire [WIDTH-1:0] i_hb1, q_hb1;
+ wire [WIDTH-1:0] i_hb2, q_hb2;
+
+ wire strobe_cic, strobe_hb1, strobe_hb2;
+ wire enable_hb1, enable_hb2;
+ wire [7:0] cic_decim_rate;
+
+ reg [WIDTH-1:0] rx_fe_i_mux, rx_fe_q_mux;
+ wire realmode;
+ wire swap_iq;
+
+ setting_reg #(.my_addr(BASE+0)) sr_0
+ (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
+ .in(set_data),.out(phase_inc),.changed());
+
+ setting_reg #(.my_addr(BASE+1), .width(18)) sr_1
+ (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
+ .in(set_data),.out(scale_factor),.changed());
+
+ setting_reg #(.my_addr(BASE+2), .width(10)) sr_2
+ (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
+ .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed());
+
+ setting_reg #(.my_addr(BASE+3), .width(2)) sr_3
+ (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
+ .in(set_data),.out({realmode,swap_iq}),.changed());
+
+ // MUX so we can do realmode signals on either input
+
+ always @(posedge clk)
+ if(swap_iq)
+ begin
+ rx_fe_i_mux <= rx_fe_q;
+ rx_fe_q_mux <= realmode ? 0 : rx_fe_i;
+ end
+ else
+ begin
+ rx_fe_i_mux <= rx_fe_i;
+ rx_fe_q_mux <= realmode ? 0 : rx_fe_q;
+ end
+
+ // NCO
+ always @(posedge clk)
+ if(rst)
+ phase <= 0;
+ else if(~ddc_enb)
+ phase <= 0;
+ else
+ phase <= phase + phase_inc;
+
+ //sign extension of cordic input
+ wire [WIDTH-1:0] to_ddc_chain_i, to_ddc_chain_q;
+ wire [cwidth-1:0] to_cordic_i, to_cordic_q;
+ sign_extend #(.bits_in(WIDTH), .bits_out(cwidth)) sign_extend_cordic_i (.in(to_ddc_chain_i), .out(to_cordic_i));
+ sign_extend #(.bits_in(WIDTH), .bits_out(cwidth)) sign_extend_cordic_q (.in(to_ddc_chain_q), .out(to_cordic_q));
+
+ // CORDIC 24-bit I/O
+ cordic_z24 #(.bitwidth(cwidth))
+ cordic(.clock(clk), .reset(rst), .enable(ddc_enb),
+ .xi(to_cordic_i),. yi(to_cordic_q), .zi(phase[31:32-zwidth]),
+ .xo(i_cordic),.yo(q_cordic),.zo() );
+
+ clip_reg #(.bits_in(cwidth), .bits_out(WIDTH)) clip_i
+ (.clk(clk), .in(i_cordic), .strobe_in(1'b1), .out(i_cordic_clip));
+ clip_reg #(.bits_in(cwidth), .bits_out(WIDTH)) clip_q
+ (.clk(clk), .in(q_cordic), .strobe_in(1'b1), .out(q_cordic_clip));
+
+ // CIC decimator 24 bit I/O
+ cic_strober cic_strober(.clock(clk),.reset(rst),.enable(ddc_enb),.rate(cic_decim_rate),
+ .strobe_fast(1),.strobe_slow(strobe_cic) );
+
+ cic_decim #(.bw(WIDTH))
+ decim_i (.clock(clk),.reset(rst),.enable(ddc_enb),
+ .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
+ .signal_in(i_cordic_clip),.signal_out(i_cic));
+
+ cic_decim #(.bw(WIDTH))
+ decim_q (.clock(clk),.reset(rst),.enable(ddc_enb),
+ .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
+ .signal_in(q_cordic_clip),.signal_out(q_cic));
+
+ // First (small) halfband 24 bit I/O
+ small_hb_dec #(.WIDTH(WIDTH)) small_hb_i
+ (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(ddc_enb),
+ .stb_in(strobe_cic),.data_in(i_cic),.stb_out(strobe_hb1),.data_out(i_hb1));
+
+ small_hb_dec #(.WIDTH(WIDTH)) small_hb_q
+ (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(ddc_enb),
+ .stb_in(strobe_cic),.data_in(q_cic),.stb_out(),.data_out(q_hb1));
+
+ // Second (large) halfband 24 bit I/O
+ wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate};
+ hb_dec #(.WIDTH(WIDTH)) hb_i
+ (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(ddc_enb),.cpi(cpi_hb),
+ .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2));
+
+ hb_dec #(.WIDTH(WIDTH)) hb_q
+ (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(ddc_enb),.cpi(cpi_hb),
+ .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2));
+
+ //scalar operation (gain of 6 bits)
+ wire [35:0] prod_i, prod_q;
+
+ MULT18X18S mult_i
+ (.P(prod_i), .A(i_hb2[WIDTH-1:WIDTH-18]), .B(scale_factor), .C(clk), .CE(strobe_hb2), .R(rst) );
+ MULT18X18S mult_q
+ (.P(prod_q), .A(q_hb2[WIDTH-1:WIDTH-18]), .B(scale_factor), .C(clk), .CE(strobe_hb2), .R(rst) );
+
+ //pipeline for the multiplier (gain of 10 bits)
+ reg [WIDTH-1:0] prod_reg_i, prod_reg_q;
+ reg strobe_mult;
+
+ always @(posedge clk) begin
+ strobe_mult <= strobe_hb2;
+ prod_reg_i <= prod_i[33:34-WIDTH];
+ prod_reg_q <= prod_q[33:34-WIDTH];
+ end
+
+ // Round final answer to 16 bits
+ wire [31:0] ddc_chain_out;
+ wire ddc_chain_stb;
+
+ round_sd #(.WIDTH_IN(WIDTH),.WIDTH_OUT(16)) round_i
+ (.clk(clk),.reset(rst), .in(prod_reg_i),.strobe_in(strobe_mult), .out(ddc_chain_out[31:16]), .strobe_out(ddc_chain_stb));
+
+ round_sd #(.WIDTH_IN(WIDTH),.WIDTH_OUT(16)) round_q
+ (.clk(clk),.reset(rst), .in(prod_reg_q),.strobe_in(strobe_mult), .out(ddc_chain_out[15:0]), .strobe_out());
+
+ dsp_rx_glue #(.DSPNO(DSPNO), .WIDTH(WIDTH)) custom(
+ .clock(clk), .reset(rst), .clear(clr), .enable(run),
+ .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user),
+ .frontend_i(rx_fe_i_mux), .frontend_q(rx_fe_q_mux),
+ .ddc_in_i(to_ddc_chain_i), .ddc_in_q(to_ddc_chain_q),
+ .ddc_out_sample(ddc_chain_out), .ddc_out_strobe(ddc_chain_stb), .ddc_out_enable(ddc_enb),
+ .bb_sample(sample), .bb_strobe(strobe));
+
+ assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_hb1, strobe_hb2};
+
+endmodule // ddc_chain
diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx.v b/fpga/usrp2/sdr_lib/dsp_core_rx.v
deleted file mode 100644
index d1c7e238a..000000000
--- a/fpga/usrp2/sdr_lib/dsp_core_rx.v
+++ /dev/null
@@ -1,144 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-module dsp_core_rx
- #(parameter BASE = 160)
- (input clk, input rst,
- input set_stb, input [7:0] set_addr, input [31:0] set_data,
-
- input [23:0] adc_i, input adc_ovf_i,
- input [23:0] adc_q, input adc_ovf_q,
-
- output [31:0] sample,
- input run,
- output strobe,
- output [31:0] debug
- );
-
- wire [31:0] phase_inc;
- reg [31:0] phase;
-
- wire [24:0] i_cordic, q_cordic;
- wire [23:0] i_cordic_clip, q_cordic_clip;
- wire [23:0] i_cic, q_cic;
- wire [23:0] i_hb1, q_hb1;
- wire [23:0] i_hb2, q_hb2;
-
- wire strobe_cic, strobe_hb1, strobe_hb2;
- wire enable_hb1, enable_hb2;
- wire [7:0] cic_decim_rate;
-
- reg [23:0] adc_i_mux, adc_q_mux;
- wire realmode;
- wire swap_iq;
-
- setting_reg #(.my_addr(BASE+0)) sr_0
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(phase_inc),.changed());
-
- /*
- setting_reg #(.my_addr(BASE+1)) sr_1
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({scale_i,scale_q}),.changed());
- */
-
- setting_reg #(.my_addr(BASE+2), .width(10)) sr_2
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({enable_hb1, enable_hb2, cic_decim_rate}),.changed());
-
- setting_reg #(.my_addr(BASE+3), .width(2)) sr_3
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({realmode,swap_iq}),.changed());
-
- // MUX so we can do realmode signals on either input
-
- always @(posedge clk)
- if(swap_iq)
- begin
- adc_i_mux <= adc_q;
- adc_q_mux <= realmode ? 24'd0 : adc_i;
- end
- else
- begin
- adc_i_mux <= adc_i;
- adc_q_mux <= realmode ? 24'd0 : adc_q;
- end
-
- // NCO
- always @(posedge clk)
- if(rst)
- phase <= 0;
- else if(~run)
- phase <= 0;
- else
- phase <= phase + phase_inc;
-
- // CORDIC 24-bit I/O
- cordic_z24 #(.bitwidth(25))
- cordic(.clock(clk), .reset(rst), .enable(run),
- .xi({adc_i_mux[23],adc_i_mux}),. yi({adc_q_mux[23],adc_q_mux}), .zi(phase[31:8]),
- .xo(i_cordic),.yo(q_cordic),.zo() );
-
- clip_reg #(.bits_in(25), .bits_out(24)) clip_i
- (.clk(clk), .in(i_cordic), .strobe_in(1'b1), .out(i_cordic_clip));
- clip_reg #(.bits_in(25), .bits_out(24)) clip_q
- (.clk(clk), .in(q_cordic), .strobe_in(1'b1), .out(q_cordic_clip));
-
- // CIC decimator 24 bit I/O
- cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate),
- .strobe_fast(1),.strobe_slow(strobe_cic) );
-
- cic_decim #(.bw(24))
- decim_i (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(i_cordic_clip),.signal_out(i_cic));
-
- cic_decim #(.bw(24))
- decim_q (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(q_cordic_clip),.signal_out(q_cic));
-
- // First (small) halfband 24 bit I/O
- small_hb_dec #(.WIDTH(24)) small_hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic),.data_in(i_cic),.stb_out(strobe_hb1),.data_out(i_hb1));
-
- small_hb_dec #(.WIDTH(24)) small_hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic),.data_in(q_cic),.stb_out(),.data_out(q_hb1));
-
- // Second (large) halfband 24 bit I/O
- wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate};
- hb_dec #(.WIDTH(24)) hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2));
-
- hb_dec #(.WIDTH(24)) hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2));
-
- // Round final answer to 16 bits
- round_sd #(.WIDTH_IN(24),.WIDTH_OUT(16)) round_i
- (.clk(clk),.reset(rst), .in(i_hb2),.strobe_in(strobe_hb2), .out(sample[31:16]), .strobe_out(strobe));
-
- round_sd #(.WIDTH_IN(24),.WIDTH_OUT(16)) round_q
- (.clk(clk),.reset(rst), .in(q_hb2),.strobe_in(strobe_hb2), .out(sample[15:0]), .strobe_out());
-
- assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_hb1, strobe_hb2};
-
-endmodule // dsp_core_rx
diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_old.v b/fpga/usrp2/sdr_lib/dsp_core_rx_old.v
deleted file mode 100644
index 90d5d839f..000000000
--- a/fpga/usrp2/sdr_lib/dsp_core_rx_old.v
+++ /dev/null
@@ -1,200 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-`define DSP_CORE_RX_BASE 160
-module dsp_core_rx_old
- (input clk, input rst,
- input set_stb, input [7:0] set_addr, input [31:0] set_data,
-
- input [13:0] adc_a, input adc_ovf_a,
- input [13:0] adc_b, input adc_ovf_b,
-
- input [15:0] io_rx,
-
- output [31:0] sample,
- input run,
- output strobe,
- output [31:0] debug
- );
-
- wire [15:0] scale_i, scale_q;
- wire [13:0] adc_a_ofs, adc_b_ofs;
- reg [13:0] adc_i, adc_q;
- wire [31:0] phase_inc;
- reg [31:0] phase;
-
- wire [35:0] prod_i, prod_q;
- wire [23:0] i_cordic, q_cordic;
- wire [23:0] i_cic, q_cic;
- wire [17:0] i_cic_scaled, q_cic_scaled;
- wire [17:0] i_hb1, q_hb1;
- wire [17:0] i_hb2, q_hb2;
- wire [15:0] i_out, q_out;
-
- wire strobe_cic, strobe_hb1, strobe_hb2;
- wire enable_hb1, enable_hb2;
- wire [7:0] cic_decim_rate;
-
- wire [31:10] UNUSED_1;
- wire [31:4] UNUSED_2;
- wire [31:2] UNUSED_3;
-
- setting_reg #(.my_addr(`DSP_CORE_RX_BASE+0)) sr_0
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(phase_inc),.changed());
-
- setting_reg #(.my_addr(`DSP_CORE_RX_BASE+1)) sr_1
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({scale_i,scale_q}),.changed());
-
- setting_reg #(.my_addr(`DSP_CORE_RX_BASE+2)) sr_2
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed());
-
- rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+6)) rx_dcoffset_a
- (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .adc_in(adc_a),.adc_out(adc_a_ofs));
-
- rx_dcoffset #(.WIDTH(14),.ADDR(`DSP_CORE_RX_BASE+7)) rx_dcoffset_b
- (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .adc_in(adc_b),.adc_out(adc_b_ofs));
-
- wire [3:0] muxctrl;
- setting_reg #(.my_addr(`DSP_CORE_RX_BASE+8)) sr_8
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_2,muxctrl}),.changed());
-
- wire [1:0] gpio_ena;
- setting_reg #(.my_addr(`DSP_CORE_RX_BASE+9)) sr_9
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_3,gpio_ena}),.changed());
-
- // The TVRX connects to what is called adc_b, thus A and B are
- // swapped throughout the design.
- //
- // In the interest of expediency and keeping the s/w sane, we just remap them here.
- // The I & Q fields are mapped the same:
- // 0 -> "the real A" (as determined by the TVRX)
- // 1 -> "the real B"
- // 2 -> const zero
-
- always @(posedge clk)
- case(muxctrl[1:0]) // The I mapping
- 0: adc_i <= adc_b_ofs; // "the real A"
- 1: adc_i <= adc_a_ofs;
- 2: adc_i <= 0;
- default: adc_i <= 0;
- endcase // case(muxctrl[1:0])
-
- always @(posedge clk)
- case(muxctrl[3:2]) // The Q mapping
- 0: adc_q <= adc_b_ofs; // "the real A"
- 1: adc_q <= adc_a_ofs;
- 2: adc_q <= 0;
- default: adc_q <= 0;
- endcase // case(muxctrl[3:2])
-
- always @(posedge clk)
- if(rst)
- phase <= 0;
- else if(~run)
- phase <= 0;
- else
- phase <= phase + phase_inc;
-
- MULT18X18S mult_i
- (.P(prod_i), // 36-bit multiplier output
- .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input
- .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input
- .C(clk), // Clock input
- .CE(1), // Clock enable input
- .R(rst) // Synchronous reset input
- );
-
- MULT18X18S mult_q
- (.P(prod_q), // 36-bit multiplier output
- .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input
- .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input
- .C(clk), // Clock input
- .CE(1), // Clock enable input
- .R(rst) // Synchronous reset input
- );
-
-
- cordic_z24 #(.bitwidth(24))
- cordic(.clock(clk), .reset(rst), .enable(run),
- .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]),
- .xo(i_cordic),.yo(q_cordic),.zo() );
-
- cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate),
- .strobe_fast(1),.strobe_slow(strobe_cic) );
-
- cic_decim #(.bw(24))
- decim_i (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(i_cordic),.signal_out(i_cic));
-
- cic_decim #(.bw(24))
- decim_q (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(q_cordic),.signal_out(q_cic));
-
- round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled));
- round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled));
- reg strobe_cic_d1;
- always @(posedge clk) strobe_cic_d1 <= strobe_cic;
-
- small_hb_dec #(.WIDTH(18)) small_hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1));
-
- small_hb_dec #(.WIDTH(18)) small_hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1));
-
- wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate};
- hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2));
-
- hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2));
-
- round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out));
- round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out));
-
- // Streaming GPIO
- //
- // io_rx[15] => I channel LSB if gpio_ena[0] high
- // io_rx[14] => Q channel LSB if gpio_ena[1] high
-
- reg [31:0] sample_reg;
- always @(posedge clk)
- begin
- sample_reg[31:17] <= i_out[15:1];
- sample_reg[15:1] <= q_out[15:1];
- sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0];
- sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0];
- end
-
- assign sample = sample_reg;
- assign strobe = strobe_hb2;
- assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2};
-
-endmodule // dsp_core_rx
diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v b/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v
index 271db8cef..a221bed44 100644
--- a/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v
+++ b/fpga/usrp2/sdr_lib/dsp_core_rx_tb.v
@@ -1,6 +1,6 @@
`timescale 1ns/1ns
-module dsp_core_rx_tb();
+module ddc_chain_tb();
reg clk, rst;
@@ -9,8 +9,8 @@ module dsp_core_rx_tb();
initial clk = 0;
always #5 clk = ~clk;
- initial $dumpfile("dsp_core_rx_tb.vcd");
- initial $dumpvars(0,dsp_core_rx_tb);
+ initial $dumpfile("ddc_chain_tb.vcd");
+ initial $dumpvars(0,ddc_chain_tb);
reg signed [23:0] adc_in;
wire signed [15:0] adc_out_i, adc_out_q;
@@ -27,7 +27,7 @@ module dsp_core_rx_tb();
reg [7:0] set_addr;
reg [31:0] set_data;
- dsp_core_rx #(.BASE(0)) dsp_core_rx
+ ddc_chain #(.BASE(0)) ddc_chain
(.clk(clk),.rst(rst),
.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
.adc_i(adc_in), .adc_ovf_i(0),
@@ -70,4 +70,4 @@ module dsp_core_rx_tb();
adc_in <= adc_in + 4;
//adc_in <= (($random % 473) + 23)/4;
*/
-endmodule // dsp_core_rx_tb
+endmodule // ddc_chain_tb
diff --git a/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v b/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v
deleted file mode 100644
index 08dab37e6..000000000
--- a/fpga/usrp2/sdr_lib/dsp_core_rx_udp.v
+++ /dev/null
@@ -1,200 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-module dsp_core_rx
- #(parameter BASE = 160)
- (input clk, input rst,
- input set_stb, input [7:0] set_addr, input [31:0] set_data,
-
- input [13:0] adc_a, input adc_ovf_a,
- input [13:0] adc_b, input adc_ovf_b,
-
- input [15:0] io_rx,
-
- output [31:0] sample,
- input run,
- output strobe,
- output [31:0] debug
- );
-
- wire [15:0] scale_i, scale_q;
- wire [13:0] adc_a_ofs, adc_b_ofs;
- reg [13:0] adc_i, adc_q;
- wire [31:0] phase_inc;
- reg [31:0] phase;
-
- wire [35:0] prod_i, prod_q;
- wire [23:0] i_cordic, q_cordic;
- wire [23:0] i_cic, q_cic;
- wire [17:0] i_cic_scaled, q_cic_scaled;
- wire [17:0] i_hb1, q_hb1;
- wire [17:0] i_hb2, q_hb2;
- wire [15:0] i_out, q_out;
-
- wire strobe_cic, strobe_hb1, strobe_hb2;
- wire enable_hb1, enable_hb2;
- wire [7:0] cic_decim_rate;
-
- wire [31:10] UNUSED_1;
- wire [31:4] UNUSED_2;
- wire [31:2] UNUSED_3;
-
- setting_reg #(.my_addr(BASE+0)) sr_0
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out(phase_inc),.changed());
-
- setting_reg #(.my_addr(BASE+1)) sr_1
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({scale_i,scale_q}),.changed());
-
- setting_reg #(.my_addr(BASE+2)) sr_2
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_1, enable_hb1, enable_hb2, cic_decim_rate}),.changed());
-
- rx_dcoffset #(.WIDTH(14),.ADDR(BASE+3)) rx_dcoffset_a
- (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .adc_in(adc_a),.adc_out(adc_a_ofs));
-
- rx_dcoffset #(.WIDTH(14),.ADDR(BASE+4)) rx_dcoffset_b
- (.clk(clk),.rst(rst),.set_stb(set_stb),.set_addr(set_addr),.set_data(set_data),
- .adc_in(adc_b),.adc_out(adc_b_ofs));
-
- wire [3:0] muxctrl;
- setting_reg #(.my_addr(BASE+5)) sr_8
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_2,muxctrl}),.changed());
-
- wire [1:0] gpio_ena;
- setting_reg #(.my_addr(BASE+6)) sr_9
- (.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({UNUSED_3,gpio_ena}),.changed());
-
- // The TVRX connects to what is called adc_b, thus A and B are
- // swapped throughout the design.
- //
- // In the interest of expediency and keeping the s/w sane, we just remap them here.
- // The I & Q fields are mapped the same:
- // 0 -> "the real A" (as determined by the TVRX)
- // 1 -> "the real B"
- // 2 -> const zero
-
- always @(posedge clk)
- case(muxctrl[1:0]) // The I mapping
- 0: adc_i <= adc_b_ofs; // "the real A"
- 1: adc_i <= adc_a_ofs;
- 2: adc_i <= 0;
- default: adc_i <= 0;
- endcase // case(muxctrl[1:0])
-
- always @(posedge clk)
- case(muxctrl[3:2]) // The Q mapping
- 0: adc_q <= adc_b_ofs; // "the real A"
- 1: adc_q <= adc_a_ofs;
- 2: adc_q <= 0;
- default: adc_q <= 0;
- endcase // case(muxctrl[3:2])
-
- always @(posedge clk)
- if(rst)
- phase <= 0;
- else if(~run)
- phase <= 0;
- else
- phase <= phase + phase_inc;
-
- MULT18X18S mult_i
- (.P(prod_i), // 36-bit multiplier output
- .A({{4{adc_i[13]}},adc_i} ), // 18-bit multiplier input
- .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input
- .C(clk), // Clock input
- .CE(1), // Clock enable input
- .R(rst) // Synchronous reset input
- );
-
- MULT18X18S mult_q
- (.P(prod_q), // 36-bit multiplier output
- .A({{4{adc_q[13]}},adc_q} ), // 18-bit multiplier input
- .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input
- .C(clk), // Clock input
- .CE(1), // Clock enable input
- .R(rst) // Synchronous reset input
- );
-
-
- cordic_z24 #(.bitwidth(24))
- cordic(.clock(clk), .reset(rst), .enable(run),
- .xi(prod_i[23:0]),. yi(prod_q[23:0]), .zi(phase[31:8]),
- .xo(i_cordic),.yo(q_cordic),.zo() );
-
- cic_strober cic_strober(.clock(clk),.reset(rst),.enable(run),.rate(cic_decim_rate),
- .strobe_fast(1),.strobe_slow(strobe_cic) );
-
- cic_decim #(.bw(24))
- decim_i (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(i_cordic),.signal_out(i_cic));
-
- cic_decim #(.bw(24))
- decim_q (.clock(clk),.reset(rst),.enable(run),
- .rate(cic_decim_rate),.strobe_in(1'b1),.strobe_out(strobe_cic),
- .signal_in(q_cordic),.signal_out(q_cic));
-
- round_reg #(.bits_in(24),.bits_out(18)) round_icic (.clk(clk),.in(i_cic),.out(i_cic_scaled));
- round_reg #(.bits_in(24),.bits_out(18)) round_qcic (.clk(clk),.in(q_cic),.out(q_cic_scaled));
- reg strobe_cic_d1;
- always @(posedge clk) strobe_cic_d1 <= strobe_cic;
-
- small_hb_dec #(.WIDTH(18)) small_hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic_d1),.data_in(i_cic_scaled),.stb_out(strobe_hb1),.data_out(i_hb1));
-
- small_hb_dec #(.WIDTH(18)) small_hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.run(run),
- .stb_in(strobe_cic_d1),.data_in(q_cic_scaled),.stb_out(),.data_out(q_hb1));
-
- wire [8:0] cpi_hb = enable_hb1 ? {cic_decim_rate,1'b0} : {1'b0,cic_decim_rate};
- hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(i_hb1),.stb_out(strobe_hb2),.data_out(i_hb2));
-
- hb_dec #(.IWIDTH(18), .OWIDTH(18), .CWIDTH(18), .ACCWIDTH(24)) hb_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb2),.run(run),.cpi(cpi_hb),
- .stb_in(strobe_hb1),.data_in(q_hb1),.stb_out(),.data_out(q_hb2));
-
- round #(.bits_in(18),.bits_out(16)) round_iout (.in(i_hb2),.out(i_out));
- round #(.bits_in(18),.bits_out(16)) round_qout (.in(q_hb2),.out(q_out));
-
- // Streaming GPIO
- //
- // io_rx[15] => I channel LSB if gpio_ena[0] high
- // io_rx[14] => Q channel LSB if gpio_ena[1] high
-
- reg [31:0] sample_reg;
- always @(posedge clk)
- begin
- sample_reg[31:17] <= i_out[15:1];
- sample_reg[15:1] <= q_out[15:1];
- sample_reg[16] <= gpio_ena[0] ? io_rx[15] : i_out[0];
- sample_reg[0] <= gpio_ena[1] ? io_rx[14] : q_out[0];
- end
-
- assign sample = sample_reg;
- assign strobe = strobe_hb2;
- assign debug = {enable_hb1, enable_hb2, run, strobe, strobe_cic, strobe_cic_d1, strobe_hb1, strobe_hb2};
-
-endmodule // dsp_core_rx
diff --git a/fpga/usrp2/sdr_lib/dsp_rx_glue.v b/fpga/usrp2/sdr_lib/dsp_rx_glue.v
new file mode 100644
index 000000000..038a67a29
--- /dev/null
+++ b/fpga/usrp2/sdr_lib/dsp_rx_glue.v
@@ -0,0 +1,98 @@
+//
+// Copyright 2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+//The following module effects the IO of the DDC chain.
+//By default, this entire module is a simple pass-through.
+
+module dsp_rx_glue
+#(
+ //the dsp unit number: 0, 1, 2...
+ parameter DSPNO = 0,
+
+ //frontend bus width
+ parameter WIDTH = 24
+)
+(
+ //control signals
+ input clock, input reset, input clear, input enable,
+
+ //user settings bus, controlled through user setting regs API
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+
+ //full rate inputs directly from the RX frontend
+ input [WIDTH-1:0] frontend_i,
+ input [WIDTH-1:0] frontend_q,
+
+ //full rate outputs directly to the DDC chain
+ output [WIDTH-1:0] ddc_in_i,
+ output [WIDTH-1:0] ddc_in_q,
+
+ //strobed samples {I16,Q16} from the RX DDC chain
+ input [31:0] ddc_out_sample,
+ input ddc_out_strobe, //high on valid sample
+ output ddc_out_enable, //enables DDC module
+
+ //strobbed baseband samples {I16,Q16} from this module
+ output [31:0] bb_sample,
+ output bb_strobe, //high on valid sample
+
+ //debug output (optional)
+ output [31:0] debug
+);
+
+ generate
+ if (DSPNO==0) begin
+ `ifndef RX_DSP0_MODULE
+ assign ddc_in_i = frontend_i;
+ assign ddc_in_q = frontend_q;
+ assign bb_sample = ddc_out_sample;
+ assign bb_strobe = ddc_out_strobe;
+ assign ddc_out_enable = enable;
+ `else
+ `RX_DSP0_MODULE #(.WIDTH(WIDTH)) rx_dsp0_custom
+ (
+ .clock(clock), .reset(reset), .clear(clear), .enable(enable),
+ .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+ .frontend_i(frontend_i), .frontend_q(frontend_q),
+ .ddc_in_i(ddc_in_i), .ddc_in_q(ddc_in_q),
+ .ddc_out_sample(ddc_out_sample), .ddc_out_strobe(ddc_out_strobe), .ddc_out_enable(ddc_out_enable),
+ .bb_sample(bb_sample), .bb_strobe(bb_strobe)
+ );
+ `endif
+ end
+ else begin
+ `ifndef RX_DSP1_MODULE
+ assign ddc_in_i = frontend_i;
+ assign ddc_in_q = frontend_q;
+ assign bb_sample = ddc_out_sample;
+ assign bb_strobe = ddc_out_strobe;
+ assign ddc_out_enable = enable;
+ `else
+ `RX_DSP1_MODULE #(.WIDTH(WIDTH)) rx_dsp1_custom
+ (
+ .clock(clock), .reset(reset), .clear(clear), .enable(enable),
+ .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+ .frontend_i(frontend_i), .frontend_q(frontend_q),
+ .ddc_in_i(ddc_in_i), .ddc_in_q(ddc_in_q),
+ .ddc_out_sample(ddc_out_sample), .ddc_out_strobe(ddc_out_strobe), .ddc_out_enable(ddc_out_enable),
+ .bb_sample(bb_sample), .bb_strobe(bb_strobe)
+ );
+ `endif
+ end
+ endgenerate
+
+endmodule //dsp_rx_glue
diff --git a/fpga/usrp2/sdr_lib/dsp_tx_glue.v b/fpga/usrp2/sdr_lib/dsp_tx_glue.v
new file mode 100644
index 000000000..46f6789ee
--- /dev/null
+++ b/fpga/usrp2/sdr_lib/dsp_tx_glue.v
@@ -0,0 +1,98 @@
+//
+// Copyright 2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+//The following module effects the IO of the DUC chain.
+//By default, this entire module is a simple pass-through.
+
+module dsp_tx_glue
+#(
+ //the dsp unit number: 0, 1, 2...
+ parameter DSPNO = 0,
+
+ //frontend bus width
+ parameter WIDTH = 24
+)
+(
+ //control signals
+ input clock, input reset, input clear, input enable,
+
+ //user settings bus, controlled through user setting regs API
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+
+ //full rate outputs directly to the TX frontend
+ output [WIDTH-1:0] frontend_i,
+ output [WIDTH-1:0] frontend_q,
+
+ //full rate outputs directly from the DUC chain
+ input [WIDTH-1:0] duc_out_i,
+ input [WIDTH-1:0] duc_out_q,
+
+ //strobed samples {I16,Q16} to the TX DUC chain
+ output [31:0] duc_in_sample,
+ input duc_in_strobe, //this is a backpressure signal
+ output duc_in_enable, //enables DUC module
+
+ //strobbed baseband samples {I16,Q16} to this module
+ input [31:0] bb_sample,
+ output bb_strobe, //this is a backpressure signal
+
+ //debug output (optional)
+ output [31:0] debug
+);
+
+ generate
+ if (DSPNO==0) begin
+ `ifndef TX_DSP0_MODULE
+ assign frontend_i = duc_out_i;
+ assign frontend_q = duc_out_q;
+ assign duc_in_sample = bb_sample;
+ assign bb_strobe = duc_in_strobe;
+ assign duc_in_enable = enable;
+ `else
+ `TX_DSP0_MODULE #(.WIDTH(WIDTH)) tx_dsp0_custom
+ (
+ .clock(clock), .reset(reset), .clear(clear), .enable(enable),
+ .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+ .frontend_i(frontend_i), .frontend_q(frontend_q),
+ .duc_out_i(duc_out_i), .duc_out_q(duc_out_q),
+ .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable),
+ .bb_sample(bb_sample), .bb_strobe(bb_strobe)
+ );
+ `endif
+ end
+ else begin
+ `ifndef TX_DSP1_MODULE
+ assign frontend_i = duc_out_i;
+ assign frontend_q = duc_out_q;
+ assign duc_in_sample = bb_sample;
+ assign bb_strobe = duc_in_strobe;
+ assign duc_in_enable = enable;
+ `else
+ `TX_DSP1_MODULE #(.WIDTH(WIDTH)) tx_dsp1_custom
+ (
+ .clock(clock), .reset(reset), .clear(clear), .enable(enable),
+ .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data),
+ .frontend_i(frontend_i), .frontend_q(frontend_q),
+ .duc_out_i(duc_out_i), .duc_out_q(duc_out_q),
+ .duc_in_sample(duc_in_sample), .duc_in_strobe(duc_in_strobe), .duc_in_enable(duc_in_enable),
+ .bb_sample(bb_sample), .bb_strobe(bb_strobe)
+ );
+ `endif
+ end
+ endgenerate
+
+endmodule //dsp_tx_glue
diff --git a/fpga/usrp2/sdr_lib/dspengine_16to8.v b/fpga/usrp2/sdr_lib/dspengine_16to8.v
index 53c5d29da..448c57d35 100644
--- a/fpga/usrp2/sdr_lib/dspengine_16to8.v
+++ b/fpga/usrp2/sdr_lib/dspengine_16to8.v
@@ -1,5 +1,5 @@
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -32,13 +32,11 @@ module dspengine_16to8
input [35:0] access_dat_i
);
- wire convert;
- wire [17:0] scale_factor;
-
- setting_reg #(.my_addr(BASE),.width(19)) sr_16to8
+ wire convert;
+ setting_reg #(.my_addr(BASE),.width(1)) sr_16to8
(.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({convert,scale_factor}),.changed());
-
+ .in(set_data),.out(convert),.changed());
+
reg [2:0] dsp_state;
localparam DSP_IDLE = 0;
localparam DSP_PARSE_HEADER = 1;
@@ -63,7 +61,7 @@ module dspengine_16to8
wire [15:0] scaled_i, scaled_q;
wire [7:0] i8, q8;
reg [7:0] i8_reg, q8_reg;
- wire stb_read, stb_mult, stb_clip, stb_round, val_read, val_mult, val_clip, val_round;
+ wire stb_read, stb_clip, val_read, val_clip;
wire stb_out, stb_reg;
reg even;
@@ -193,29 +191,21 @@ module dspengine_16to8
wire [15:0] i16 = access_dat_i[31:16];
wire [15:0] q16 = access_dat_i[15:0];
- pipectrl #(.STAGES(4), .TAGWIDTH(2)) pipectrl
+ pipectrl #(.STAGES(2), .TAGWIDTH(2)) pipectrl
(.clk(clk), .reset(reset),
.src_rdy_i(send_to_pipe), .dst_rdy_o(), // dst_rdy_o will always be 1 since dst_rdy_i is 1, below
.src_rdy_o(stb_out), .dst_rdy_i(1), // always accept output of chain
- .strobes({stb_round,stb_clip,stb_mult,stb_read}), .valids({val_round,val_clip,val_mult,val_read}),
+ .strobes({stb_clip,stb_read}), .valids({val_clip,val_read}),
.tag_i({last,even}), .tag_o({last_o,even_o}));
always @(posedge clk)
if(stb_out & ~even_o)
{i8_reg,q8_reg} <= {i8,q8};
-
- MULT18X18S mult_i
- (.P(prod_i), .A(scale_factor), .B({i16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) );
- clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_i
- (.clk(clk), .in(prod_i[35:12]), .out(scaled_i), .strobe_in(stb_clip), .strobe_out());
- round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_i
- (.clk(clk), .reset(reset), .in(scaled_i), .strobe_in(stb_round), .out(i8), .strobe_out());
-
- MULT18X18S mult_q
- (.P(prod_q), .A(scale_factor), .B({q16,2'b00}), .C(clk), .CE(stb_mult), .R(reset) );
- clip_reg #(.bits_in(24),.bits_out(16),.STROBED(1)) clip_q
- (.clk(clk), .in(prod_q[35:12]), .out(scaled_q), .strobe_in(stb_clip), .strobe_out());
- round_sd #(.WIDTH_IN(16),.WIDTH_OUT(8),.DISABLE_SD(1)) round_q
- (.clk(clk), .reset(reset), .in(scaled_q), .strobe_in(stb_round), .out(q8), .strobe_out());
+
+ clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_i
+ (.clk(clk), .in(i16), .out(i8), .strobe_in(stb_clip), .strobe_out());
+
+ clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_q
+ (.clk(clk), .in(q16), .out(q8), .strobe_in(stb_clip), .strobe_out());
endmodule // dspengine_16to8
diff --git a/fpga/usrp2/sdr_lib/dspengine_8to16.v b/fpga/usrp2/sdr_lib/dspengine_8to16.v
new file mode 100644
index 000000000..85187d78d
--- /dev/null
+++ b/fpga/usrp2/sdr_lib/dspengine_8to16.v
@@ -0,0 +1,203 @@
+
+// Copyright 2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program. If not, see <http://www.gnu.org/licenses/>.
+//
+
+module dspengine_8to16
+ #(parameter BASE = 0,
+ parameter BUF_SIZE = 9,
+ parameter HEADER_OFFSET = 0)
+ (input clk, input reset, input clear,
+ input set_stb, input [7:0] set_addr, input [31:0] set_data,
+
+ output access_we,
+ output access_stb,
+ input access_ok,
+ output access_done,
+ output access_skip_read,
+ output [BUF_SIZE-1:0] access_adr,
+ input [BUF_SIZE-1:0] access_len,
+ output [35:0] access_dat_o,
+ input [35:0] access_dat_i
+ );
+
+ wire convert;
+
+ setting_reg #(.my_addr(BASE),.width(1)) sr_8to16
+ (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr),
+ .in(set_data),.out(convert),.changed());
+
+ reg [3:0] dsp_state;
+ localparam DSP_IDLE = 0;
+ localparam DSP_IDLE_RD = 1;
+ localparam DSP_PARSE_HEADER = 2;
+ localparam DSP_READ = 3;
+ localparam DSP_READ_WAIT = 4;
+ localparam DSP_WRITE_1 = 5;
+ localparam DSP_WRITE_0 = 6;
+ localparam DSP_READ_TRAILER = 7;
+ localparam DSP_WRITE_TRAILER = 8;
+ localparam DSP_WRITE_HEADER = 9;
+ localparam DSP_DONE = 10;
+
+ // Parse VITA header
+ wire is_if_data = (access_dat_i[31:29] == 3'b000);
+ wire has_streamid = access_dat_i[28];
+ wire has_classid = access_dat_i[27];
+ wire has_trailer = access_dat_i[26];
+ // 25:24 reserved, aka SOB/EOB
+ wire has_secs = |access_dat_i[23:22];
+ wire has_tics = |access_dat_i[21:20];
+ wire [3:0] hdr_length = 1 + has_streamid + has_classid + has_classid + has_secs + has_tics + has_tics;
+ reg [15:0] hdr_length_reg;
+
+ reg odd;
+
+ reg [BUF_SIZE-1:0] read_adr, write_adr;
+ reg has_trailer_reg;
+
+ reg [31:0] new_header, new_trailer, trailer_mask;
+ reg wait_for_trailer;
+ reg [15:0] data_in_len;
+ wire is_odd = access_dat_i[22] & access_dat_i[10];
+ wire [15:0] data_in_lenx2 = {data_in_len[14:0], 1'b0} - is_odd;
+
+ reg [7:0] i8_0, q8_0;
+ wire [7:0] i8_1 = access_dat_i[31:24];
+ wire [7:0] q8_1 = access_dat_i[23:16];
+ reg skip;
+
+
+ always @(posedge clk)
+ { i8_0, q8_0 } <= access_dat_i[15:0];
+
+ always @(posedge clk)
+ if(reset | clear)
+ dsp_state <= DSP_IDLE;
+ else
+ case(dsp_state)
+ DSP_IDLE :
+ begin
+ read_adr <= HEADER_OFFSET;
+ write_adr <= HEADER_OFFSET;
+ if(access_ok)
+ dsp_state <= DSP_IDLE_RD;
+ end
+
+ DSP_IDLE_RD: //extra idle state for read to become valid
+ dsp_state <= DSP_PARSE_HEADER;
+
+ DSP_PARSE_HEADER :
+ begin
+ has_trailer_reg <= has_trailer;
+ new_header[31:0] <= access_dat_i[31:0];
+ hdr_length_reg <= hdr_length;
+ if(~is_if_data | ~convert | ~has_trailer)
+ // ~convert is valid (16 bit mode) but both ~trailer and ~is_if_data are both
+ // really error conditions on the TX side. We shouldn't ever see them in the TX chain
+ dsp_state <= DSP_WRITE_HEADER;
+ else
+ begin
+ read_adr <= access_dat_i[15:0] + HEADER_OFFSET - 1; // point to trailer
+ dsp_state <= DSP_READ_TRAILER;
+ wait_for_trailer <= 0;
+ data_in_len <= access_dat_i[15:0] - hdr_length - 1 /*trailer*/;
+ end
+ end
+
+ DSP_READ_TRAILER :
+ begin
+ wait_for_trailer <= 1;
+ if(wait_for_trailer)
+ dsp_state <= DSP_WRITE_TRAILER;
+ new_trailer <= access_dat_i[31:0]; // Leave trailer unchanged
+ odd <= is_odd;
+ write_adr <= hdr_length_reg + data_in_lenx2 + HEADER_OFFSET;
+ end
+
+ DSP_WRITE_TRAILER :
+ begin
+ dsp_state <= DSP_READ;
+ write_adr <= write_adr - 1;
+ read_adr <= read_adr - 1;
+ new_header[15:0] <= write_adr + (1 - HEADER_OFFSET); // length = addr of trailer + 1
+ end
+
+ DSP_READ :
+ begin
+ read_adr <= read_adr - 1;
+ if(odd)
+ dsp_state <= DSP_READ_WAIT;
+ else
+ dsp_state <= DSP_WRITE_1;
+ odd <= 0;
+ end
+
+ DSP_READ_WAIT :
+ dsp_state <= DSP_WRITE_0;
+
+ DSP_WRITE_1 :
+ begin
+ write_adr <= write_adr - 1;
+ if(write_adr == (hdr_length_reg+HEADER_OFFSET))
+ begin
+ write_adr <= HEADER_OFFSET;
+ dsp_state <= DSP_WRITE_HEADER;
+ end
+ dsp_state <= DSP_WRITE_0;
+ end
+
+ DSP_WRITE_0 :
+ begin
+ write_adr <= write_adr - 1;
+ if(write_adr == (hdr_length_reg+HEADER_OFFSET))
+ begin
+ write_adr <= HEADER_OFFSET;
+ dsp_state <= DSP_WRITE_HEADER;
+ end
+ else
+ dsp_state <= DSP_READ;
+ end
+
+ DSP_WRITE_HEADER :
+ dsp_state <= DSP_DONE;
+
+ DSP_DONE :
+ begin
+ read_adr <= HEADER_OFFSET;
+ write_adr <= HEADER_OFFSET;
+ dsp_state <= DSP_IDLE;
+ end
+ endcase // case (dsp_state)
+
+ assign access_skip_read = 0;
+ assign access_done = (dsp_state == DSP_DONE);
+
+ assign access_stb = 1;
+
+ assign access_we = (dsp_state == DSP_WRITE_HEADER) |
+ (dsp_state == DSP_WRITE_TRAILER) |
+ (dsp_state == DSP_WRITE_0) |
+ (dsp_state == DSP_WRITE_1);
+
+ assign access_dat_o = (dsp_state == DSP_WRITE_HEADER) ? { 4'h0, new_header } :
+ (dsp_state == DSP_WRITE_TRAILER) ? { 4'h2, new_trailer } :
+ (dsp_state == DSP_WRITE_0) ? { 4'h0, i8_0, 8'd0, q8_0, 8'd0 } :
+ (dsp_state == DSP_WRITE_1) ? { 4'h0, i8_1, 8'd0, q8_1, 8'd0 } :
+ 34'h0DEADBEEF;
+
+ assign access_adr = access_we ? write_adr : read_adr;
+
+endmodule // dspengine_16to8
diff --git a/fpga/usrp2/sdr_lib/dsp_core_tx.v b/fpga/usrp2/sdr_lib/duc_chain.v
index 4e0163e0a..bd3402a1f 100644
--- a/fpga/usrp2/sdr_lib/dsp_core_tx.v
+++ b/fpga/usrp2/sdr_lib/duc_chain.v
@@ -1,5 +1,5 @@
//
-// Copyright 2011 Ettus Research LLC
+// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
@@ -15,26 +15,35 @@
// along with this program. If not, see <http://www.gnu.org/licenses/>.
//
+//! The USRP digital up-conversion chain
-module dsp_core_tx
- #(parameter BASE=0)
- (input clk, input rst,
+module duc_chain
+ #(
+ parameter BASE = 0,
+ parameter DSPNO = 0,
+ parameter WIDTH = 24
+ )
+ (input clk, input rst, input clr,
input set_stb, input [7:0] set_addr, input [31:0] set_data,
+ input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user,
- output [23:0] tx_i, output [23:0] tx_q,
+ // To TX frontend
+ output [WIDTH-1:0] tx_fe_i,
+ output [WIDTH-1:0] tx_fe_q,
- // To tx_control
+ // From TX control
input [31:0] sample,
input run,
output strobe,
output [31:0] debug
);
- wire [15:0] i, q, scale_i, scale_q;
+ wire duc_enb;
+ wire [17:0] scale_factor;
wire [31:0] phase_inc;
reg [31:0] phase;
wire [7:0] interp_rate;
- wire [3:0] dacmux_a, dacmux_b;
+ wire [3:0] tx_femux_a, tx_femux_b;
wire enable_hb1, enable_hb2;
wire rate_change;
@@ -42,9 +51,9 @@ module dsp_core_tx
(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
.in(set_data),.out(phase_inc),.changed());
- setting_reg #(.my_addr(BASE+1)) sr_1
+ setting_reg #(.my_addr(BASE+1), .width(18)) sr_1
(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
- .in(set_data),.out({scale_i,scale_q}),.changed());
+ .in(set_data),.out(scale_factor),.changed());
setting_reg #(.my_addr(BASE+2), .width(10)) sr_2
(.clk(clk),.rst(rst),.strobe(set_stb),.addr(set_addr),
@@ -57,13 +66,13 @@ module dsp_core_tx
reg strobe_hb2 = 1;
cic_strober #(.WIDTH(8))
- cic_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate),
+ cic_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
.strobe_fast(1),.strobe_slow(strobe_cic_pre) );
cic_strober #(.WIDTH(2))
- hb2_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(enable_hb2 ? 2 : 1),
+ hb2_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb2 ? 2 : 1),
.strobe_fast(strobe_cic_pre),.strobe_slow(strobe_hb2_pre) );
cic_strober #(.WIDTH(2))
- hb1_strober(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(enable_hb1 ? 2 : 1),
+ hb1_strober(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(enable_hb1 ? 2 : 1),
.strobe_fast(strobe_hb2_pre),.strobe_slow(strobe_hb1_pre) );
always @(posedge clk) strobe_hb1 <= strobe_hb1_pre;
@@ -74,7 +83,7 @@ module dsp_core_tx
always @(posedge clk)
if(rst)
phase <= 0;
- else if(~run)
+ else if(~duc_enb)
phase <= 0;
else
phase <= phase + phase_inc;
@@ -82,8 +91,8 @@ module dsp_core_tx
wire signed [17:0] da, db;
wire signed [35:0] prod_i, prod_q;
- wire [17:0] bb_i = {sample[31:16],2'b0};
- wire [17:0] bb_q = {sample[15:0],2'b0};
+ wire [15:0] bb_i;
+ wire [15:0] bb_q;
wire [17:0] i_interp, q_interp;
wire [17:0] hb1_i, hb1_q, hb2_i, hb2_q;
@@ -92,10 +101,10 @@ module dsp_core_tx
// Note that max CIC rate is 128, which would give an overflow on cpo if enable_hb2 is true,
// but the default case inside hb_interp handles this
- hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_i
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_i),.stb_out(strobe_hb2),.data_out(hb1_i));
- hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(24)) hb_interp_q
- (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in(bb_q),.stb_out(strobe_hb2),.data_out(hb1_q));
+ hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_i
+ (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_i, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_i));
+ hb_interp #(.IWIDTH(18),.OWIDTH(18),.ACCWIDTH(WIDTH)) hb_interp_q
+ (.clk(clk),.rst(rst),.bypass(~enable_hb1),.cpo(cpo),.stb_in(strobe_hb1),.data_in({bb_q, 2'b0}),.stb_out(strobe_hb2),.data_out(hb1_q));
small_hb_int #(.WIDTH(18)) small_hb_interp_i
(.clk(clk),.rst(rst),.bypass(~enable_hb2),.stb_in(strobe_hb2),.data_in(hb1_i),
@@ -105,24 +114,22 @@ module dsp_core_tx
.output_rate(interp_rate),.stb_out(strobe_cic),.data_out(hb2_q));
cic_interp #(.bw(18),.N(4),.log2_of_max_rate(7))
- cic_interp_i(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate),
+ cic_interp_i(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
.strobe_in(strobe_cic),.strobe_out(1),
.signal_in(hb2_i),.signal_out(i_interp));
cic_interp #(.bw(18),.N(4),.log2_of_max_rate(7))
- cic_interp_q(.clock(clk),.reset(rst),.enable(run & ~rate_change),.rate(interp_rate),
+ cic_interp_q(.clock(clk),.reset(rst),.enable(duc_enb & ~rate_change),.rate(interp_rate),
.strobe_in(strobe_cic),.strobe_out(1),
.signal_in(hb2_q),.signal_out(q_interp));
- assign strobe = strobe_hb1;
-
- localparam cwidth = 24; // was 18
+ localparam cwidth = WIDTH; // was 18
localparam zwidth = 24; // was 16
wire [cwidth-1:0] da_c, db_c;
cordic_z24 #(.bitwidth(cwidth))
- cordic(.clock(clk), .reset(rst), .enable(run),
+ cordic(.clock(clk), .reset(rst), .enable(duc_enb),
.xi({i_interp,{(cwidth-18){1'b0}}}),.yi({q_interp,{(cwidth-18){1'b0}}}),
.zi(phase[31:32-zwidth]),
.xo(da_c),.yo(db_c),.zo() );
@@ -130,7 +137,7 @@ module dsp_core_tx
MULT18X18S MULT18X18S_inst
(.P(prod_i), // 36-bit multiplier output
.A(da_c[cwidth-1:cwidth-18]), // 18-bit multiplier input
- .B({{2{scale_i[15]}},scale_i}), // 18-bit multiplier input
+ .B(scale_factor), // 18-bit multiplier input
.C(clk), // Clock input
.CE(1), // Clock enable input
.R(rst) // Synchronous reset input
@@ -139,15 +146,20 @@ module dsp_core_tx
MULT18X18S MULT18X18S_inst_2
(.P(prod_q), // 36-bit multiplier output
.A(db_c[cwidth-1:cwidth-18]), // 18-bit multiplier input
- .B({{2{scale_q[15]}},scale_q}), // 18-bit multiplier input
+ .B(scale_factor), // 18-bit multiplier input
.C(clk), // Clock input
.CE(1), // Clock enable input
.R(rst) // Synchronous reset input
);
- assign tx_i = prod_i[28:5];
- assign tx_q = prod_q[28:5];
-
+ dsp_tx_glue #(.DSPNO(DSPNO), .WIDTH(WIDTH)) dsp_tx_glue(
+ .clock(clk), .reset(rst), .clear(clr), .enable(run),
+ .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user),
+ .frontend_i(tx_fe_i), .frontend_q(tx_fe_q),
+ .duc_out_i(prod_i[33:34-WIDTH]), .duc_out_q(prod_q[33:34-WIDTH]),
+ .duc_in_sample({bb_i, bb_q}), .duc_in_strobe(strobe_hb1), .duc_in_enable(duc_enb),
+ .bb_sample(sample), .bb_strobe(strobe));
+
assign debug = {strobe_cic, strobe_hb1, strobe_hb2,run};
endmodule // dsp_core
diff --git a/fpga/usrp2/sdr_lib/dummy_rx.v b/fpga/usrp2/sdr_lib/dummy_rx.v
index b22d5f896..42bbe36b2 100644
--- a/fpga/usrp2/sdr_lib/dummy_rx.v
+++ b/fpga/usrp2/sdr_lib/dummy_rx.v
@@ -76,4 +76,4 @@ module dummy_rx
q_out <= q_out + 1;
-endmodule // dsp_core_rx
+endmodule // ddc_chain
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 23:47:05 +0000