summaryrefslogtreecommitdiffstats
path: root/fpga/usrp2/gpmc
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2/gpmc')
-rw-r--r--fpga/usrp2/gpmc/Makefile.srcs2
-rw-r--r--fpga/usrp2/gpmc/fifo_watcher.v7
-rw-r--r--fpga/usrp2/gpmc/gpmc_async.v62
-rw-r--r--fpga/usrp2/gpmc/new_read.v62
-rw-r--r--fpga/usrp2/gpmc/new_write.v82
5 files changed, 43 insertions, 172 deletions
diff --git a/fpga/usrp2/gpmc/Makefile.srcs b/fpga/usrp2/gpmc/Makefile.srcs
index bf0c0ecfd..bff6ae3e0 100644
--- a/fpga/usrp2/gpmc/Makefile.srcs
+++ b/fpga/usrp2/gpmc/Makefile.srcs
@@ -17,6 +17,4 @@ gpmc_to_fifo_async.v \
gpmc_to_fifo_sync.v \
gpmc_wb.v \
ram_to_fifo.v \
-new_write.v \
-new_read.v \
))
diff --git a/fpga/usrp2/gpmc/fifo_watcher.v b/fpga/usrp2/gpmc/fifo_watcher.v
index 3971e3c54..b139f5143 100644
--- a/fpga/usrp2/gpmc/fifo_watcher.v
+++ b/fpga/usrp2/gpmc/fifo_watcher.v
@@ -30,11 +30,10 @@ module fifo_watcher
reg [15:0] counter;
wire [4:0] pkt_count;
assign debug = pkt_count;
- wire space;
fifo_short #(.WIDTH(16)) frame_lengths
(.clk(clk), .reset(reset), .clear(clear),
- .datain(counter), .src_rdy_i(write), .dst_rdy_o(space),
+ .datain(counter), .src_rdy_i(write), .dst_rdy_o(),
.dataout(length), .src_rdy_o(have_packet_int), .dst_rdy_i(read),
.occupied(pkt_count), .space());
@@ -54,9 +53,7 @@ module fifo_watcher
bus_error <= 1;
else if(read & ~have_packet_int)
bus_error <= 1;
- else if(write & ~space)
- bus_error <= 1;
-
+
reg in_packet;
always @(posedge clk)
if(reset | clear)
diff --git a/fpga/usrp2/gpmc/gpmc_async.v b/fpga/usrp2/gpmc/gpmc_async.v
index 9972e81b0..c0bec683a 100644
--- a/fpga/usrp2/gpmc/gpmc_async.v
+++ b/fpga/usrp2/gpmc/gpmc_async.v
@@ -22,7 +22,7 @@ module gpmc_async
parameter RXFIFOSIZE = 11,
parameter BUSDEBUG = 1)
(// GPMC signals
- input arst, input bus_clk,
+ input arst,
input EM_CLK, inout [15:0] EM_D, input [10:1] EM_A, input [1:0] EM_NBE,
input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE,
@@ -67,21 +67,27 @@ module gpmc_async
// ////////////////////////////////////////////
// TX Data Path
- wire [17:0] tx18_data;
- wire tx18_src_rdy, tx18_dst_rdy;
+ wire [17:0] tx18_data, tx18b_data;
+ wire tx18_src_rdy, tx18_dst_rdy, tx18b_src_rdy, tx18b_dst_rdy;
wire [15:0] tx_fifo_space;
wire [35:0] tx36_data, tx_data;
wire tx36_src_rdy, tx36_dst_rdy, tx_src_rdy, tx_dst_rdy;
- new_write new_write
+ gpmc_to_fifo_async gpmc_to_fifo_async
(.EM_D(EM_D), .EM_NBE(EM_NBE), .EM_NCS(EM_NCS4), .EM_NWE(EM_NWE),
- .bus_clk(bus_clk), .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), .clear(clear_tx),
+ .fifo_clk(fifo_clk), .fifo_rst(fifo_rst), .clear(clear_tx),
.data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy),
- .frame_len(tx_frame_len), .fifo_ready(tx_have_space), .bus_error(bus_error_tx) );
+ .frame_len(tx_frame_len), .fifo_space(tx_fifo_space), .fifo_ready(tx_have_space),
+ .bus_error(bus_error_tx) );
+ fifo_cascade #(.WIDTH(18), .SIZE(10)) tx_fifo
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
+ .datain(tx18_data), .src_rdy_i(tx18_src_rdy), .dst_rdy_o(tx18_dst_rdy), .space(tx_fifo_space),
+ .dataout(tx18b_data), .src_rdy_o(tx18b_src_rdy), .dst_rdy_i(tx18b_dst_rdy), .occupied());
+
fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy),
+ .f19_datain({1'b0,tx18b_data}), .f19_src_rdy_i(tx18b_src_rdy), .f19_dst_rdy_o(tx18b_dst_rdy),
.f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy));
fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36
@@ -104,20 +110,31 @@ module gpmc_async
.datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy),
.dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy));
- wire [31:0] pkt_count;
- wire throttle = pkt_count == 16;
-
fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
.f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy),
.f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) );
- new_read new_read
+ fifo_cascade #(.WIDTH(18), .SIZE(12)) rx_fifo
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+ .datain(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), .space(rx_fifo_space),
+ .dataout(rx18b_data), .src_rdy_o(rx18b_src_rdy), .dst_rdy_i(rx18b_dst_rdy), .occupied());
+
+ fifo_to_gpmc_async fifo_to_gpmc_async
(.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy),
+ .data_i(rx18b_data), .src_rdy_i(rx18b_src_rdy), .dst_rdy_o(rx18b_dst_rdy),
.EM_D(EM_D_fifo), .EM_NCS(EM_NCS4), .EM_NOE(EM_NOE),
- .have_packet(rx_have_data), .frame_len(rx_frame_len), .bus_error(bus_error_rx) );
+ .frame_len(rx_frame_len) );
+
+ wire [31:0] pkt_count;
+ fifo_watcher fifo_watcher
+ (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
+ .src_rdy1(rx18_src_rdy), .dst_rdy1(rx18_dst_rdy), .sof1(rx18_data[16]), .eof1(rx18_data[17]),
+ .src_rdy2(rx18b_src_rdy), .dst_rdy2(rx18b_dst_rdy), .sof2(rx18b_data[16]), .eof2(rx18b_data[17]),
+ .have_packet(rx_have_data), .length(rx_frame_len), .bus_error(bus_error_rx),
+ .debug(pkt_count));
+
// ////////////////////////////////////////////
// Control path on CS6
@@ -213,13 +230,16 @@ module gpmc_async
// FIXME -- make sure packet completes before we shutoff
// FIXME -- handle overrun and underrun
- wire [0:17] dummy18;
-
- assign debug = {rx_overrun, tx_underrun, bus_error_tx, bus_error_rx, tx_have_space, rx_have_data, EM_NCS4, EM_NCS6,
- 6'd0, EM_NOE, EM_NWE,
- pkt_src_enable, pkt_sink_enable, timedrx_src_rdy_int, timedrx_dst_rdy_int,
- timedrx_src_rdy, timedrx_dst_rdy,
- testrx_src_rdy, testrx_dst_rdy,
- rx_src_rdy, rx_dst_rdy, rx36_src_rdy, rx36_dst_rdy, rx18_src_rdy, rx18_dst_rdy, rx18b_src_rdy, rx18b_dst_rdy};
+wire [0:17] dummy18;
+
+assign debug = {8'd0,
+ test_rate,
+ pkt_src_enable, pkt_sink_enable, timedrx_src_rdy_int, timedrx_dst_rdy_int,
+ timedrx_src_rdy, timedrx_dst_rdy,
+ testrx_src_rdy, testrx_dst_rdy,
+ rx_src_rdy, rx_dst_rdy,
+ rx36_src_rdy, rx36_dst_rdy,
+ rx18_src_rdy, rx18_dst_rdy,
+ rx18b_src_rdy, rx18b_dst_rdy};
endmodule // gpmc_async
diff --git a/fpga/usrp2/gpmc/new_read.v b/fpga/usrp2/gpmc/new_read.v
deleted file mode 100644
index ae3db23cf..000000000
--- a/fpga/usrp2/gpmc/new_read.v
+++ /dev/null
@@ -1,62 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-module new_read
- (input clk, input reset, input clear,
- input [17:0] data_i, input src_rdy_i, output dst_rdy_o,
- output reg [15:0] EM_D, input EM_NCS, input EM_NOE,
- output have_packet, output [15:0] frame_len, output bus_error);
-
- wire [17:0] data_int;
- wire src_rdy_int, dst_rdy_int;
-
- fifo_cascade #(.WIDTH(18), .SIZE(12)) rx_fifo
- (.clk(clk), .reset(reset), .clear(clear),
- .datain(data_i), .src_rdy_i(src_rdy_i), .dst_rdy_o(dst_rdy_o), .space(),
- .dataout(data_int), .src_rdy_o(src_rdy_int), .dst_rdy_i(dst_rdy_int), .occupied());
-
- fifo_watcher fifo_watcher
- (.clk(clk), .reset(reset), .clear(clear),
- .src_rdy1(src_rdy_i), .dst_rdy1(dst_rdy_o), .sof1(data_i[16]), .eof1(data_i[17]),
- .src_rdy2(src_rdy_int), .dst_rdy2(dst_rdy_int), .sof2(data_int[16]), .eof2(data_int[17]),
- .have_packet(have_packet), .length(frame_len), .bus_error(bus_error),
- .debug());
-
- // Synchronize the async control signals
- reg [1:0] cs_del, oe_del;
- reg [15:0] counter;
-
- always @(posedge clk)
- if(reset)
- begin
- cs_del <= 2'b11;
- oe_del <= 2'b11;
- end
- else
- begin
- cs_del <= { cs_del[0], EM_NCS };
- oe_del <= { oe_del[0], EM_NOE };
- end
-
- assign dst_rdy_int = ( ~cs_del[1] & ~oe_del[1] & oe_del[0]); // change output on trailing edge
-
- //always @(posedge clk) // 3 cycle latency ( OE -> OE_del -> FIFO -> output REG )
- always @* // 2 cycle latency ( OE -> OE_del -> FIFO )
- EM_D <= data_int[15:0];
-
-endmodule // new_read
diff --git a/fpga/usrp2/gpmc/new_write.v b/fpga/usrp2/gpmc/new_write.v
deleted file mode 100644
index df0ce19db..000000000
--- a/fpga/usrp2/gpmc/new_write.v
+++ /dev/null
@@ -1,82 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program. If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-module new_write
- (input [15:0] EM_D, input [1:0] EM_NBE, input EM_NCS, input EM_NWE,
-
- input bus_clk,
- input fifo_clk, input fifo_rst, input clear,
- output [17:0] data_o, output src_rdy_o, input dst_rdy_i,
-
- input [15:0] frame_len, output reg fifo_ready,
- output reg bus_error );
-
- wire [15:0] fifo_space;
- reg [15:0] counter;
-
- // Synchronize the async control signals
- reg [1:0] cs_del, we_del;
- reg [15:0] data_del[0:1];
-
- always @(posedge bus_clk)
- if(fifo_rst)
- begin
- cs_del <= 2'b11;
- we_del <= 2'b11;
- end
- else
- begin
- cs_del <= { cs_del[0], EM_NCS };
- we_del <= { we_del[0], EM_NWE };
- data_del[1] <= data_del[0];
- data_del[0] <= EM_D;
- end
-
- wire first_write = (counter == 0);
- wire last_write = ((counter+1) == frame_len);
-
- wire [17:0] data_int = {last_write,first_write,data_del[1]};
- wire src_rdy_int = (~cs_del[1] & ~we_del[1] & we_del[0]); // rising edge
- wire dst_rdy_int;
-
- always @(posedge bus_clk)
- if(fifo_rst | clear)
- counter <= 0;
- else if(src_rdy_int)
- if(last_write)
- counter <= 0;
- else
- counter <= counter + 1;
-
- always @(posedge bus_clk)
- if(fifo_rst | clear)
- fifo_ready <= 0;
- else
- fifo_ready <= /* first_write & */ (fifo_space > 16'd1023);
-
- always @(posedge bus_clk)
- if(fifo_rst | clear)
- bus_error <= 0;
- else if(src_rdy_int & ~dst_rdy_int)
- bus_error <= 1;
-
- fifo_2clock_cascade #(.WIDTH(18), .SIZE(10)) tx_fifo
- (.wclk(bus_clk), .datain(data_int), .src_rdy_i(src_rdy_int), .dst_rdy_o(dst_rdy_int), .space(fifo_space),
- .rclk(fifo_clk), .dataout(data_o), .src_rdy_o(src_rdy_o), .dst_rdy_i(dst_rdy_i), .occupied(), .arst(fifo_rst));
-
-endmodule // new_write
generated by cgit v1.2.3 (git 2.46.0) at 2025-11-04 13:58:13 +0000