aboutsummaryrefslogtreecommitdiffstats
path: root/fpga/usrp2/gpif/slave_fifo.v
diff options
context:
space:
mode:
Diffstat (limited to 'fpga/usrp2/gpif/slave_fifo.v')
-rw-r--r--fpga/usrp2/gpif/slave_fifo.v601
1 files changed, 202 insertions, 399 deletions
diff --git a/fpga/usrp2/gpif/slave_fifo.v b/fpga/usrp2/gpif/slave_fifo.v
index e75f28913..c10b79ab4 100644
--- a/fpga/usrp2/gpif/slave_fifo.v
+++ b/fpga/usrp2/gpif/slave_fifo.v
@@ -20,85 +20,71 @@
//this is a FIFO master interface for the FX2 in "slave fifo" mode.
module slave_fifo
- #(parameter TXFIFOSIZE = 12, parameter RXFIFOSIZE = 12)
+ #(
+ //how many cycles max in a transfer state
+ parameter DATA_XFER_COUNT = 256,
+ parameter CTRL_XFER_COUNT = 32,
+
+ //sizes for fifo36 2 clock cascade fifos
+ parameter DATA_RX_FIFO_SIZE = 9,
+ parameter DATA_TX_FIFO_SIZE = 9,
+ parameter CTRL_RX_FIFO_SIZE = 9,
+ parameter CTRL_TX_FIFO_SIZE = 9
+ )
(// GPIF signals
input gpif_clk, input gpif_rst,
inout [15:0] gpif_d,
input [3:0] gpif_ctl,
- output sloe, output slrd, output slwr, output pktend, output [1:0] fifoadr,
-
- // Wishbone signals
- input wb_clk, input wb_rst,
- output [15:0] wb_adr_o, output [15:0] wb_dat_mosi, input [15:0] wb_dat_miso,
- output [1:0] wb_sel_o, output wb_cyc_o, output wb_stb_o, output wb_we_o, input wb_ack_i,
- input [7:0] triggers,
-
- input dsp_rx_run,
-
+ output reg sloe, output reg slrd, output reg slwr, output reg pktend, output reg [1:0] fifoadr,
+
// FIFO interface
- input fifo_clk, input fifo_rst, input clear_tx, input clear_rx,
- output [35:0] tx_data_o, output tx_src_rdy_o, input tx_dst_rdy_i,
- input [35:0] rx_data_i, input rx_src_rdy_i, output rx_dst_rdy_o,
- input [35:0] tx_err_data_i, input tx_err_src_rdy_i, output tx_err_dst_rdy_o,
- output tx_underrun, output rx_overrun,
-
- input [15:0] test_len, input [7:0] test_rate, input [3:0] test_ctrl,
- output [31:0] debug0, output [31:0] debug1
+ input fifo_clk, input fifo_rst,
+ output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy,
+ input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy,
+ output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy,
+ input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy,
+
+ output [31:0] debug
);
- reg FX2_DE, FX2_CE, FX2_DF, FX2_CF;
+ wire FX2_DE_pre = ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA)
+ wire FX2_CE_pre = ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB)
+ wire FX2_DF_pre = ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC)
+ wire FX2_CF_pre = ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD)
- // inputs to FPGA (all active low)
+ reg FX2_DE, FX2_CE, FX2_DF, FX2_CF;
always @(posedge gpif_clk) begin
- FX2_DE <= ~gpif_ctl[0]; //EP2 FX2 FIFO empty (FLAGA)
- FX2_CE <= ~gpif_ctl[1]; //EP4 FX2 FIFO empty (FLAGB)
- FX2_DF <= ~gpif_ctl[2]; //EP6 FX2 FIFO full (FLAGC)
- FX2_CF <= ~gpif_ctl[3]; //EP8 FX2 FIFO full (FLAGD)
+ FX2_DE <= FX2_DE_pre; //EP2 FX2 FIFO empty (FLAGA)
+ FX2_CE <= FX2_CE_pre; //EP4 FX2 FIFO empty (FLAGB)
+ FX2_DF <= FX2_DF_pre; //EP6 FX2 FIFO full (FLAGC)
+ FX2_CF <= FX2_CF_pre; //EP8 FX2 FIFO full (FLAGD)
end
- wire [17:0] gpif_d_out_ctrl, gpif_d_out_data, gpif_d_out;
+ wire [15:0] gpif_d_out_ctrl, gpif_d_out_data;
+ reg [15:0] gpif_d_out, gpif_d_in;
// ////////////////////////////////////////////////////////////////////
// GPIF bus master state machine
- //transfer size for GPIF data. this can be anything really, it's specified only for
- //fairness in bus sharing. 256 lines is 512 bytes over the wire, half the size of
- //the double buffers in B100/B150. this should probably be a toplevel parameter or even
- //a settings register value.
- localparam data_transfer_size = 256;
- localparam ctrl_transfer_size = 16; //probably unnecessary since ctrl xfers won't back up
-
- // state machine i/o to four fifos
- //tx
- wire ctrl_tx_dst_rdy; //sm input, ctrl tx path has space
- wire ctrl_tx_src_rdy; //sm output, ctrl tx path enable
- wire data_tx_dst_rdy; //sm input, data tx path has space
- wire data_tx_src_rdy; //sm output, data tx path enable
-
- //rx
- wire ctrl_rx_dst_rdy; //sm output, ctrl rx path enable
- wire ctrl_rx_src_rdy; //sm input, ctrl rx path has space
- wire data_rx_dst_rdy; //sm output, data rx path enable
- wire data_rx_src_rdy; //sm input, data rx path has space
-
- reg tx_data_enough_space;
+ wire rx_valid, resp_valid;
+ reg tx_valid, ctrl_valid;
+ wire tx_ready, ctrl_ready;
+ reg rx_enable, resp_enable;
+ wire rx_data_enough_occ;
reg [9:0] transfer_count; //number of lines (a line is 16 bits) in active transfer
-
- reg pktend_latch;
reg [3:0] state; //state machine current state
localparam STATE_IDLE = 0;
- localparam STATE_DATA_RX = 5;
+ localparam STATE_THINK = 1;
+ localparam STATE_DATA_RX = 2;
localparam STATE_DATA_TX = 3;
- localparam STATE_CTRL_RX = 6;
- localparam STATE_CTRL_TX = 9;
- localparam STATE_DATA_TX_SLOE = 2;
- localparam STATE_CTRL_TX_SLOE = 8;
- localparam STATE_DATA_RX_ADR = 1;
- localparam STATE_CTRL_RX_ADR = 4;
- localparam STATE_PKTEND_ADR = 10;
- localparam STATE_PKTEND = 7;
+ localparam STATE_CTRL_RX = 4;
+ localparam STATE_CTRL_TX = 5;
+ localparam STATE_DATA_TX_SLOE = 6;
+ localparam STATE_CTRL_TX_SLOE = 7;
+ localparam STATE_DATA_RX_ADR = 8;
+ localparam STATE_CTRL_RX_ADR = 9;
//logs the last bus user for xfer fairness
//we only care about data rx vs. tx since ctrl pkts are so short
@@ -106,368 +92,185 @@ module slave_fifo
localparam BUS_HOG_RX = 0;
localparam BUS_HOG_TX = 1;
+ wire resp_eof;
+ reg [1:0] idle_count;
+
// //////////////////////////////////////////////////////////////
// FX2 slave FIFO bus master state machine
//
- always @(posedge gpif_clk)
- if(gpif_rst)
- state <= STATE_IDLE;
- else
- begin
- case (state)
- STATE_IDLE:
- begin
- transfer_count <= 0;
- //handle transitions to other states
- if(ctrl_tx_dst_rdy & ~FX2_CE) //if there's room in the ctrl fifo and the FX2 has ctrl data
- state <= STATE_CTRL_TX_SLOE;
- else if(ctrl_rx_src_rdy & ~FX2_CF) //if the ctrl fifo has data and the FX2 isn't full
- state <= STATE_CTRL_RX_ADR;
- else if(data_tx_dst_rdy & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX & tx_data_enough_space) //if there's room in the data fifo and the FX2 has data
- state <= STATE_DATA_TX_SLOE;
- else if(data_rx_src_rdy & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) //if the data fifo has data and the FX2 isn't full
- state <= STATE_DATA_RX_ADR;
- else if(data_tx_dst_rdy & ~FX2_DE & tx_data_enough_space)
- state <= STATE_DATA_TX_SLOE;
- else if(data_rx_src_rdy & ~FX2_DF)
- state <= STATE_DATA_RX_ADR;
- else if(~data_rx_src_rdy & ~dsp_rx_run & pktend_latch & ~FX2_DF)
- state <= STATE_PKTEND_ADR;
-
- if(data_rx_src_rdy)
- pktend_latch <= 1;
- end
-
- STATE_DATA_TX_SLOE: //just to assert SLOE one cycle before SLRD
- state <= STATE_DATA_TX;
- STATE_CTRL_TX_SLOE:
- state <= STATE_CTRL_TX;
-
- STATE_DATA_RX_ADR: //just to assert FIFOADR one cycle before SLWR
- state <= STATE_DATA_RX;
- STATE_CTRL_RX_ADR:
- state <= STATE_CTRL_RX;
-
- STATE_DATA_RX:
- begin
- if(data_rx_src_rdy && data_rx_dst_rdy)
- transfer_count <= transfer_count + 1;
- else
- state <= STATE_IDLE;
- last_data_bus_hog <= BUS_HOG_RX;
- end
-
- STATE_PKTEND_ADR:
- begin
- state <= STATE_PKTEND;
- end
-
- STATE_PKTEND:
- begin
- state <= STATE_IDLE;
- pktend_latch <= 0;
- end
-
- STATE_DATA_TX:
- begin
- if(data_tx_dst_rdy && data_tx_src_rdy)
- transfer_count <= transfer_count + 1;
- else
- state <= STATE_IDLE;
- last_data_bus_hog <= BUS_HOG_TX;
- end
- STATE_CTRL_RX:
- begin
- if(ctrl_rx_src_rdy && ctrl_rx_dst_rdy)
- transfer_count <= transfer_count + 1;
- else
- state <= STATE_IDLE;
- end
- STATE_CTRL_TX:
- begin
- if(ctrl_tx_dst_rdy && ctrl_tx_src_rdy)
- transfer_count <= transfer_count + 1;
- else
- state <= STATE_IDLE;
- end
- endcase
+ always @(posedge gpif_clk)
+ if(gpif_rst) begin
+ state <= STATE_IDLE;
+ sloe <= 1;
+ slrd <= 1;
+ slwr <= 1;
+ pktend <= 1;
+ rx_enable <= 0;
+ tx_valid <= 0;
+ ctrl_valid <= 0;
+ resp_enable <= 0;
+ idle_count <= 0;
+ end
+ else case (state)
+ STATE_IDLE: begin
+ transfer_count <= 0;
+ sloe <= 1;
+ slrd <= 1;
+ slwr <= 1;
+ pktend <= 1;
+ rx_enable <= 0;
+ tx_valid <= 0;
+ ctrl_valid <= 0;
+ resp_enable <= 0;
+ if (idle_count == 2'b11) state <= STATE_THINK;
+ idle_count <= idle_count + 1;
+ end
+
+ STATE_THINK: begin
+
+ idle_count <= 0;
+
+ //handle transitions to other states
+ if(ctrl_ready & ~FX2_CE) begin //if there's room in the ctrl fifo and the FX2 has ctrl data
+ state <= STATE_CTRL_TX_SLOE;
+ fifoadr <= 2'b01;
+ sloe <= 0;
+ end
+ else if(resp_valid & ~FX2_CF) begin //if the ctrl fifo has data and the FX2 isn't full
+ state <= STATE_CTRL_RX_ADR;
+ fifoadr <= 2'b11;
+ end
+ else if(tx_ready & ~FX2_DE & last_data_bus_hog == BUS_HOG_RX) begin //if there's room in the data fifo and the FX2 has data
+ state <= STATE_DATA_TX_SLOE;
+ last_data_bus_hog <= BUS_HOG_TX;
+ fifoadr <= 2'b00;
+ sloe <= 0;
end
+ else if(rx_data_enough_occ & ~FX2_DF & last_data_bus_hog == BUS_HOG_TX) begin //if the data fifo has data and the FX2 isn't full
+ state <= STATE_DATA_RX_ADR;
+ last_data_bus_hog <= BUS_HOG_RX;
+ fifoadr <= 2'b10;
+ end
+ else if(tx_ready & ~FX2_DE) begin
+ state <= STATE_DATA_TX_SLOE;
+ last_data_bus_hog <= BUS_HOG_TX;
+ fifoadr <= 2'b00;
+ sloe <= 0;
+ end
+ else if(rx_data_enough_occ & ~FX2_DF) begin
+ state <= STATE_DATA_RX_ADR;
+ last_data_bus_hog <= BUS_HOG_RX;
+ fifoadr <= 2'b10;
+ end
+ end
- // ///////////////////////////////////////////////////////////////////
- // fifo signal assignments and enables
+ STATE_DATA_TX_SLOE: begin //just to assert SLOE one cycle before SLRD
+ state <= STATE_DATA_TX;
+ slrd <= 0;
+ end
- //enable fifos
- assign data_rx_dst_rdy = (state == STATE_DATA_RX) && ~FX2_DF && (transfer_count != data_transfer_size);
- assign data_tx_src_rdy = (state == STATE_DATA_TX) && ~FX2_DE && (transfer_count != data_transfer_size);
- assign ctrl_rx_dst_rdy = (state == STATE_CTRL_RX) && ~FX2_CF;
- assign ctrl_tx_src_rdy = (state == STATE_CTRL_TX) && ~FX2_CE;
+ STATE_CTRL_TX_SLOE: begin
+ state <= STATE_CTRL_TX;
+ slrd <= 0;
+ end
- //framing for TX ctrl packets
- wire sop_ctrl, eop_ctrl;
- assign sop_ctrl = (transfer_count == 0);
- assign eop_ctrl = (transfer_count == (ctrl_transfer_size-1));
+ STATE_DATA_RX_ADR: begin //just to assert FIFOADR one cycle before SLWR
+ state <= STATE_DATA_RX;
+ rx_enable <= 1;
+ end
+
+ STATE_CTRL_RX_ADR: begin
+ state <= STATE_CTRL_RX;
+ resp_enable <= 1;
+ end
+
+ STATE_DATA_RX: begin
+ if (FX2_DF_pre || ~rx_valid || transfer_count == DATA_XFER_COUNT-1) begin
+ state <= STATE_IDLE;
+ rx_enable <= 0;
+ end
+ gpif_d_out <= gpif_d_out_data;
+ slwr <= ~rx_valid;
+ transfer_count <= transfer_count + 1;
+ end
+
+ STATE_DATA_TX: begin
+ if (FX2_DE_pre || transfer_count == DATA_XFER_COUNT-1) begin
+ state <= STATE_IDLE;
+ slrd <= 1;
+ end
+ gpif_d_in <= gpif_d;
+ tx_valid <= 1;
+ transfer_count <= transfer_count + 1;
+ end
+
+ STATE_CTRL_RX: begin
+ if (FX2_CF_pre || ~resp_valid || resp_eof || transfer_count == CTRL_XFER_COUNT-1) begin
+ state <= STATE_IDLE;
+ resp_enable <= 0;
+ end
+ pktend <= ~resp_eof;
+ gpif_d_out <= gpif_d_out_ctrl;
+ slwr <= ~resp_valid;
+ transfer_count <= transfer_count + 1;
+ end
+
+ STATE_CTRL_TX: begin
+ if (FX2_CE_pre || transfer_count == CTRL_XFER_COUNT-1) begin
+ state <= STATE_IDLE;
+ slrd <= 1;
+ end
+ gpif_d_in <= gpif_d;
+ ctrl_valid <= 1;
+ transfer_count <= transfer_count + 1;
+ end
+ endcase
- // ////////////////////////////////////////////////////////////////////
- // set GPIF pins
-
- //set fifoadr to the appropriate endpoint
- // {0,0}: EP2, data TX from host
- // {0,1}: EP4, ctrl TX from host
- // {1,0}: EP6, data RX to host
- // {1,1}: EP8, ctrl RX to host
- assign fifoadr = {(state == STATE_DATA_RX) | (state == STATE_CTRL_RX) | (state == STATE_DATA_RX_ADR) | (state == STATE_CTRL_RX_ADR) | (state == STATE_PKTEND) | (state == STATE_PKTEND_ADR),
- (state == STATE_CTRL_RX) | (state == STATE_CTRL_RX_ADR) | (state == STATE_CTRL_TX) | (state == STATE_CTRL_TX_SLOE)};
- //set sloe, slwr, slrd (all active low)
- //SLOE gets asserted when we want data from the FX2; i.e., TX mode
- assign sloe = ~{(state == STATE_DATA_TX) | (state == STATE_CTRL_TX) | (state == STATE_DATA_TX_SLOE) | (state == STATE_CTRL_TX_SLOE)};
- //"read" and "write" here are from the master's point of view;
- //so "read" means "transmit" and "write" means "receive"
- assign slwr = ~{(data_rx_src_rdy && data_rx_dst_rdy) || (ctrl_rx_src_rdy && ctrl_rx_dst_rdy)};
- assign slrd = ~{(data_tx_src_rdy && data_tx_dst_rdy) || (ctrl_tx_src_rdy && ctrl_tx_dst_rdy)};
-
- wire pktend_ctrl, pktend_data;
- assign pktend_ctrl = ((~ctrl_rx_src_rdy | gpif_d_out_ctrl[17]) & (state == STATE_CTRL_RX));
- assign pktend_data = (state == STATE_PKTEND);
- assign pktend = ~(pktend_ctrl | pktend_data);
-
- //mux between ctrl/data RX data out based on endpoint selection
- assign gpif_d_out = fifoadr[0] ? gpif_d_out_ctrl : gpif_d_out_data;
// GPIF output data lines, tristate
- assign gpif_d = sloe ? gpif_d_out : 16'bz;
+ assign gpif_d = (sloe)? gpif_d_out[15:0] : 16'bz;
// ////////////////////////////////////////////////////////////////////
// TX Data Path
- wire [15:0] txfifo_data;
- wire txfifo_src_rdy, txfifo_dst_rdy;
- wire [35:0] tx36_data;
- wire tx36_src_rdy, tx36_dst_rdy;
- wire [15:0] data_tx_2clk;
- wire tx_src_rdy_2clk, tx_dst_rdy_2clk;
-
- wire [15:0] wr_fifo_space;
-
- always @(posedge gpif_clk)
- tx_data_enough_space <= (wr_fifo_space >= data_transfer_size);
-
- fifo_cascade #(.WIDTH(16), .SIZE(12)) wr_fifo
- (.clk(gpif_clk), .reset(gpif_rst), .clear(clear_tx),
- .datain(gpif_d), .src_rdy_i(data_tx_src_rdy), .dst_rdy_o(data_tx_dst_rdy), .space(wr_fifo_space),
- .dataout(txfifo_data), .src_rdy_o(txfifo_src_rdy), .dst_rdy_i(txfifo_dst_rdy), .occupied());
-
- fifo_2clock_cascade #(.WIDTH(16), .SIZE(4)) wr_fifo_2clk
- (.wclk(gpif_clk), .datain(txfifo_data), .src_rdy_i(txfifo_src_rdy), .dst_rdy_o(txfifo_dst_rdy), .space(),
- .rclk(fifo_clk), .dataout(data_tx_2clk), .src_rdy_o(tx_src_rdy_2clk), .dst_rdy_i(tx_dst_rdy_2clk), .occupied(),
- .arst(fifo_rst));
-
- // join vita packets which are longer than one frame, add SOP/EOP/OCC
- wire [18:0] refr_data;
- wire refr_src_rdy, refr_dst_rdy;
- //below 3 signals for debug only
- wire refr_state;
- wire refr_eof;
- wire [15:0] refr_len;
-
- packet_reframer tx_packet_reframer
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .data_i(data_tx_2clk), .src_rdy_i(tx_src_rdy_2clk), .dst_rdy_o(tx_dst_rdy_2clk),
- .data_o(refr_data), .src_rdy_o(refr_src_rdy), .dst_rdy_i(refr_dst_rdy),
- .state(refr_state), .eof_out(refr_eof), .length(refr_len));
-
- fifo19_to_fifo36 #(.LE(1)) f19_to_f36
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .f19_datain(refr_data), .f19_src_rdy_i(refr_src_rdy), .f19_dst_rdy_o(refr_dst_rdy),
- .f36_dataout(tx36_data), .f36_src_rdy_o(tx36_src_rdy), .f36_dst_rdy_i(tx36_dst_rdy));
-
- fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_fifo36
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .datain(tx36_data), .src_rdy_i(tx36_src_rdy), .dst_rdy_o(tx36_dst_rdy),
- .dataout(tx_data_o), .src_rdy_o(tx_src_rdy_o), .dst_rdy_i(tx_dst_rdy_i));
+ gpmc16_to_fifo36 #(.FIFO_SIZE(DATA_TX_FIFO_SIZE), .MIN_SPACE16(DATA_XFER_COUNT)) fifo36_to_gpmc16_tx(
+ .gpif_clk(gpif_clk), .gpif_rst(gpif_rst),
+ .in_data(gpif_d_in), .ready(tx_ready), .valid(tx_valid),
+ .fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
+ .out_data(tx_data), .out_src_rdy(tx_src_rdy), .out_dst_rdy(tx_dst_rdy)
+ );
// ////////////////////////////////////////////
// RX Data Path
- wire [35:0] rx36_data;
- wire rx36_src_rdy, rx36_dst_rdy;
- wire [18:0] rx19_data;
- wire rx19_src_rdy, rx19_dst_rdy;
- wire [15:0] rxfifospace;
-
- //deep 36 bit wide input fifo buffers from DSP
- fifo_cascade #(.WIDTH(36), .SIZE(8)) rx_fifo36
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .datain(rx_data_i), .src_rdy_i(rx_src_rdy_i), .dst_rdy_o(rx_dst_rdy_o),
- .dataout(rx36_data), .src_rdy_o(rx36_src_rdy), .dst_rdy_i(rx36_dst_rdy));
-
- //convert to fifo19
- fifo36_to_fifo19 #(.LE(1)) f36_to_f19
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .f36_datain(rx36_data), .f36_src_rdy_i(rx36_src_rdy), .f36_dst_rdy_o(rx36_dst_rdy),
- .f19_dataout(rx19_data), .f19_src_rdy_o(rx19_src_rdy), .f19_dst_rdy_i(rx19_dst_rdy) );
-
- wire [18:0] data_rx_int;
- wire rx_src_rdy_int, rx_dst_rdy_int;
- //clock domain crossing fifo for RX data
- fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) rd_fifo_2clk
- (.wclk(fifo_clk), .datain(rx19_data), .src_rdy_i(rx19_src_rdy), .dst_rdy_o(rx19_dst_rdy), .space(),
- .rclk(~gpif_clk), .dataout(data_rx_int), .src_rdy_o(rx_src_rdy_int), .dst_rdy_i(rx_dst_rdy_int), .occupied(),
- .arst(fifo_rst));
-
- //rd_fifo buffers writes to the 2clock fifo above
- fifo_cascade #(.WIDTH(16), .SIZE(RXFIFOSIZE)) rd_fifo
- (.clk(~gpif_clk), .reset(gpif_rst), .clear(clear_rx),
- .datain(data_rx_int), .src_rdy_i(rx_src_rdy_int), .dst_rdy_o(rx_dst_rdy_int), .space(rxfifospace),
- .dataout(gpif_d_out_data), .src_rdy_o(data_rx_src_rdy), .dst_rdy_i(data_rx_dst_rdy), .occupied());
+ fifo36_to_gpmc16 #(.FIFO_SIZE(DATA_RX_FIFO_SIZE), .MIN_OCC16(DATA_XFER_COUNT)) fifo36_to_gpmc16_rx(
+ .fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
+ .in_data(rx_data), .in_src_rdy(rx_src_rdy), .in_dst_rdy(rx_dst_rdy),
+ .gpif_clk(gpif_clk), .gpif_rst(gpif_rst),
+ .has_data(rx_data_enough_occ),
+ .out_data(gpif_d_out_data), .valid(rx_valid), .enable(rx_enable)
+ );
// ////////////////////////////////////////////////////////////////////
- // FIFO to Wishbone interface
+ // CTRL TX Data Path
- wire [18:0] resp_data, resp_int;
- wire resp_src_rdy, resp_dst_rdy;
- wire resp_src_rdy_int, resp_dst_rdy_int;
-
- wire [18:0] tx_err19_data;
- wire tx_err19_src_rdy, tx_err19_dst_rdy;
-
- wire [18:0] ctrl_data;
- wire ctrl_src_rdy, ctrl_dst_rdy;
-
- fifo_to_wb fifo_to_wb
- (.clk(fifo_clk), .reset(fifo_rst), .clear(0),
- .data_i(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy),
- .data_o(resp_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int),
- .wb_adr_o(wb_adr_o), .wb_dat_mosi(wb_dat_mosi), .wb_dat_miso(wb_dat_miso), .wb_sel_o(wb_sel_o),
- .wb_cyc_o(wb_cyc_o), .wb_stb_o(wb_stb_o), .wb_we_o(wb_we_o), .wb_ack_i(wb_ack_i),
- .triggers(triggers),
- .debug0(), .debug1());
-
- // ////////////////////////////////////////////////////////////////////
- // TX CTRL PATH (ctrl commands into Wishbone)
+ gpmc16_to_fifo36 #(.FIFO_SIZE(CTRL_TX_FIFO_SIZE), .MIN_SPACE16(CTRL_XFER_COUNT)) fifo36_to_gpmc16_ctrl(
+ .gpif_clk(gpif_clk), .gpif_rst(gpif_rst),
+ .in_data(gpif_d_in), .ready(ctrl_ready), .valid(ctrl_valid),
+ .fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
+ .out_data(ctrl_data), .out_src_rdy(ctrl_src_rdy), .out_dst_rdy(ctrl_dst_rdy)
+ );
- //how does this use fifo_clk instead of wb_clk
- //answer: on b100 fifo clk IS wb clk
- fifo_2clock_cascade #(.WIDTH(19), .SIZE(4)) ctrl_fifo_2clk
- (.wclk(gpif_clk), .datain({1'b0,eop_ctrl,sop_ctrl,gpif_d}),
- .src_rdy_i(ctrl_tx_src_rdy), .dst_rdy_o(ctrl_tx_dst_rdy), .space(),
- .rclk(fifo_clk), .dataout(ctrl_data),
- .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy), .occupied(),
- .arst(fifo_rst));
+ // ////////////////////////////////////////////
+ // CTRL RX Data Path
+
+ fifo36_to_gpmc16 #(.FIFO_SIZE(CTRL_RX_FIFO_SIZE)) fifo36_to_gpmc16_resp(
+ .fifo_clk(fifo_clk), .fifo_rst(fifo_rst),
+ .in_data(resp_data), .in_src_rdy(resp_src_rdy), .in_dst_rdy(resp_dst_rdy),
+ .gpif_clk(gpif_clk), .gpif_rst(gpif_rst),
+ .out_data(gpif_d_out_ctrl), .valid(resp_valid), .enable(resp_enable),
+ .eof(resp_eof)
+ );
- // ////////////////////////////////////////////////////////////////////
- // RX CTRL PATH (async packets, ctrl response data)
-
- //tx_err_data_i is the 36wide tx async err data clocked on fifo_clk
- fifo36_to_fifo19 #(.LE(1)) f36_to_f19_txerr
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .f36_datain(tx_err_data_i), .f36_src_rdy_i(tx_err_src_rdy_i), .f36_dst_rdy_o(tx_err_dst_rdy_o),
- .f19_dataout(tx_err19_data), .f19_src_rdy_o(tx_err19_src_rdy), .f19_dst_rdy_i(tx_err19_dst_rdy) );
-
- //mux FIFO-to-WB along with async tx err pkts into one ctrl resp fifo
- //how is this clocked on wb_clk?
- fifo19_mux #(.prio(0)) mux_err_stream
- (.clk(wb_clk), .reset(wb_rst), .clear(clear_rx),
- .data0_i(resp_int), .src0_rdy_i(resp_src_rdy_int), .dst0_rdy_o(resp_dst_rdy_int),
- .data1_i(tx_err19_data), .src1_rdy_i(tx_err19_src_rdy), .dst1_rdy_o(tx_err19_dst_rdy),
- .data_o(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy));
-
- //clock domain crossing cascade fifo for mux_err_stream to get from wb_clk to gpif_clk
- //the output of this fifo is CTRL DATA PENDING FOR GPIF
- fifo_2clock_cascade #(.WIDTH(18), .SIZE(4)) resp_fifo_2clk
- (.wclk(wb_clk), .datain(resp_data[17:0]), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .space(),
- .rclk(~gpif_clk), .dataout(gpif_d_out_ctrl),
- .src_rdy_o(ctrl_rx_src_rdy), .dst_rdy_i(ctrl_rx_dst_rdy), .occupied(),
- .arst(wb_rst));
-
-
- // ////////////////////////////////////////////////////////////////////
- // Debug support, timed and loopback
- // RX side muxes test data into the same stream
+ assign debug = 0;
- ///////////////////////////////////////////////////////////////////////
- // debug lines
- wire [31:0] debug_rd, debug_wr, debug_split0, debug_split1;
-
- wire [35:0] timedrx_data, loopbackrx_data, testrx_data;
- wire [35:0] timedtx_data, loopbacktx_data, testtx_data;
- wire timedrx_src_rdy, timedrx_dst_rdy, loopbackrx_src_rdy, loopbackrx_dst_rdy,
- testrx_src_rdy, testrx_dst_rdy;
- wire timedtx_src_rdy, timedtx_dst_rdy, loopbacktx_src_rdy, loopbacktx_dst_rdy,
- testtx_src_rdy, testtx_dst_rdy;
- wire timedrx_src_rdy_int, timedrx_dst_rdy_int, timedtx_src_rdy_int, timedtx_dst_rdy_int;
-
- wire [31:0] total, crc_err, seq_err, len_err;
- wire sel_testtx = test_ctrl[0];
- wire sel_loopbacktx = test_ctrl[1];
- wire pkt_src_enable = test_ctrl[2];
- wire pkt_sink_enable = test_ctrl[3];
-/*
- fifo36_mux rx_test_mux_lvl_1
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .data0_i(timedrx_data), .src0_rdy_i(timedrx_src_rdy), .dst0_rdy_o(timedrx_dst_rdy),
- .data1_i(loopbackrx_data), .src1_rdy_i(loopbackrx_src_rdy), .dst1_rdy_o(loopbackrx_dst_rdy),
- .data_o(testrx_data), .src_rdy_o(testrx_src_rdy), .dst_rdy_i(testrx_dst_rdy));
-
- fifo36_mux rx_test_mux_lvl_2
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .data0_i(testrx_data), .src0_rdy_i(testrx_src_rdy), .dst0_rdy_o(testrx_dst_rdy),
- .data1_i(rx_data_i), .src1_rdy_i(rx_src_rdy_i), .dst1_rdy_o(rx_dst_rdy_o),
- .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy));
-
- fifo_short #(.WIDTH(36)) loopback_fifo
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx | clear_rx),
- .datain(loopbacktx_data), .src_rdy_i(loopbacktx_src_rdy), .dst_rdy_o(loopbacktx_dst_rdy),
- .dataout(loopbackrx_data), .src_rdy_o(loopbackrx_src_rdy), .dst_rdy_i(loopbackrx_dst_rdy));
-
- // Crossbar used as a demux for switching TX stream to main DSP or to test logic
- crossbar36 tx_crossbar_lvl_1
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .cross(sel_testtx),
- .data0_i(tx_data), .src0_rdy_i(tx_src_rdy), .dst0_rdy_o(tx_dst_rdy),
- .data1_i(tx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input
- .data0_o(tx_data_o), .src0_rdy_o(tx_src_rdy_o), .dst0_rdy_i(tx_dst_rdy_i),
- .data1_o(testtx_data), .src1_rdy_o(testtx_src_rdy), .dst1_rdy_i(testtx_dst_rdy) );
-
- crossbar36 tx_crossbar_lvl_2
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .cross(sel_loopbacktx),
- .data0_i(testtx_data), .src0_rdy_i(testtx_src_rdy), .dst0_rdy_o(testtx_dst_rdy),
- .data1_i(testtx_data), .src1_rdy_i(1'b0), .dst1_rdy_o(), // No 2nd input
- .data0_o(timedtx_data), .src0_rdy_o(timedtx_src_rdy), .dst0_rdy_i(timedtx_dst_rdy),
- .data1_o(loopbacktx_data), .src1_rdy_o(loopbacktx_src_rdy), .dst1_rdy_i(loopbacktx_dst_rdy) );
-
- // Fixed rate TX traffic consumer
- fifo_pacer tx_pacer
- (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_sink_enable),
- .src1_rdy_i(timedtx_src_rdy), .dst1_rdy_o(timedtx_dst_rdy),
- .src2_rdy_o(timedtx_src_rdy_int), .dst2_rdy_i(timedtx_dst_rdy_int),
- .underrun(tx_underrun), .overrun());
-
- packet_verifier32 pktver32
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_tx),
- .data_i(timedtx_data), .src_rdy_i(timedtx_src_rdy_int), .dst_rdy_o(timedtx_dst_rdy_int),
- .total(total), .crc_err(crc_err), .seq_err(seq_err), .len_err(len_err));
-
- // Fixed rate RX traffic generator
- vita_pkt_gen pktgen
- (.clk(fifo_clk), .reset(fifo_rst), .clear(clear_rx),
- .len(test_len),
- .data_o(timedrx_data), .src_rdy_o(timedrx_src_rdy_int), .dst_rdy_i(timedrx_dst_rdy_int));
-
- fifo_pacer rx_pacer
- (.clk(fifo_clk), .reset(fifo_rst), .rate(test_rate), .enable(pkt_src_enable),
- .src1_rdy_i(timedrx_src_rdy_int), .dst1_rdy_o(timedrx_dst_rdy_int),
- .src2_rdy_o(timedrx_src_rdy), .dst2_rdy_i(timedrx_dst_rdy),
- .underrun(), .overrun(rx_overrun));
-*/
- // ////////////////////////////////////////////
- // DEBUG
-
- assign debug0 = { pktend_latch, data_rx_src_rdy, gpif_ctl[3:0], sloe, slrd, slwr, pktend, fifoadr[1:0], state[3:0], gpif_d[15:0]};
- //assign debug0 = { data_tx_src_rdy, data_tx_dst_rdy, tx_src_rdy_int, tx_dst_rdy_int,
- // tx19_src_rdy, tx19_dst_rdy, refr_src_rdy, refr_dst_rdy,
- // tx36_src_rdy, tx36_dst_rdy,
- // gpif_ctl[3:0], fifoadr[1:0],
- // wr_fifo_space[15:0]};
- assign debug1 = { 16'b0, transfer_count[7:0], ctrl_rx_src_rdy, ctrl_tx_dst_rdy, data_rx_src_rdy,
- data_tx_dst_rdy, ctrl_tx_src_rdy, ctrl_rx_dst_rdy, data_tx_src_rdy, data_rx_dst_rdy};
endmodule // slave_fifo
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 08:07:20 +0000