1 files changed, 71 insertions, 0 deletions
diff --git a/fpga/usrp2/custom/custom_dsp_tx.v b/fpga/usrp2/custom/custom_dsp_tx.v
new file mode 100644
index 000000000..0848a187f
--- /dev/null
+++ b/fpga/usrp2/custom/custom_dsp_tx.v
@@ -0,0 +1,71 @@
+//
+// Copyright 2012 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+//COPY ME, CUSTOMIZE ME...
+
+//The following module effects the IO of the DUC chain.
+//By default, this entire module is a simple pass-through.
+
+//To implement DSP logic before the DUC:
+//Implement custom DSP between baseband and duc input.
+
+//To implement DSP logic after the DUC:
+//Implement custom DSP between duc output and frontend.
+
+//To bypass the DUC with custom logic:
+//Implement custom DSP between baseband and frontend.
+
+module custom_dsp_tx
+#(
+    //frontend bus width
+    parameter WIDTH = 24
+)
+(
+    //control signals
+    input clock, //dsp clock
+    input reset, //active high synchronous reset
+    input clear, //active high on packet control init
+    input enable, //active high when streaming enabled
+
+    //user settings bus, controlled through user setting regs API
+    input set_stb, input [7:0] set_addr, input [31:0] set_data,
+
+    //full rate outputs directly to the TX frontend
+    output [WIDTH-1:0] frontend_i,
+    output [WIDTH-1:0] frontend_q,
+
+    //full rate outputs directly from the DUC chain
+    input [WIDTH-1:0] duc_out_i,
+    input [WIDTH-1:0] duc_out_q,
+
+    //strobed samples {I16,Q16} to the TX DUC chain
+    output [31:0] duc_in_sample,
+    input duc_in_strobe, //this is a backpressure signal
+    output duc_in_enable, //enables DUC module
+
+    //strobbed baseband samples {I16,Q16} to this module
+    input [31:0] bb_sample,
+    output bb_strobe //this is a backpressure signal
+);
+
+    assign frontend_i = duc_out_i;
+    assign frontend_q = duc_out_q;
+    assign duc_in_sample = bb_sample;
+    assign bb_strobe = duc_in_strobe;
+    assign duc_in_enable = enable;
+
+endmodule //custom_dsp_tx