1 files changed, 0 insertions, 74 deletions
diff --git a/fpga/usrp2/control_lib/wb_bus_writer.v b/fpga/usrp2/control_lib/wb_bus_writer.v
deleted file mode 100644
index 08e641d37..000000000
--- a/fpga/usrp2/control_lib/wb_bus_writer.v
+++ /dev/null
@@ -1,74 +0,0 @@
-//
-// Copyright 2011 Ettus Research LLC
-//
-// This program is free software: you can redistribute it and/or modify
-// it under the terms of the GNU General Public License as published by
-// the Free Software Foundation, either version 3 of the License, or
-// (at your option) any later version.
-//
-// This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-// GNU General Public License for more details.
-//
-// You should have received a copy of the GNU General Public License
-// along with this program.  If not, see <http://www.gnu.org/licenses/>.
-//
-
-
-// wb_bus_writer
-//
-// WB Bus Master device to send a sequence of single-word transactions
-// based on a list in a RAM or ROM (FASM interface)
-// ROM data format is {WB_ADDR[15:0],WB_DATA[31:0]}
-// continues until it gets an all-1s entry
-
-module wb_bus_writer (input start,
-		      output done,
-		      output reg [15:0] rom_addr,
-		      input [47:0] rom_data,
-		      // WB Master Interface, don't need wb_dat_i
-		      input wb_clk_i,
-		      input wb_rst_i,
-		      output [31:0] wb_dat_o,
-		      input wb_ack_i,
-		      output [15:0] wb_adr_o,
-		      output wb_cyc_o,
-		      output [3:0] wb_sel_o,
-		      output wb_stb_o,
-		      output wb_we_o
-		      );
-
-`define IDLE 0
-`define READ 1
-   
-   reg [3:0] 		     state;
-   
-   assign 		     done = (state != `IDLE) && (&rom_data);  // Done when we see all 1s
-   
-   always @(posedge wb_clk_i)
-     if(wb_rst_i)
-       begin
-	  rom_addr <= #1 0;
-	  state <= #1 0;
-       end
-     else if(start)
-       begin
-	  rom_addr <= #1 0;
-	  state <= #1 `READ;
-       end
-     else if((state == `READ) && wb_ack_i)
-       if(done)
-	 state <= #1 `IDLE;
-       else
-	 rom_addr <= #1 rom_addr + 1;
-   
-   assign wb_dat_o = rom_data[31:0];
-   assign wb_adr_o = rom_data[47:32];
-   assign wb_sel_o = 4'b1111;    // All writes are the full 32 bits
-   
-   assign wb_cyc_o = !done & (state != `IDLE);
-   assign wb_stb_o = !done & (state != `IDLE);
-   assign wb_we_o = !done & (state != `IDLE);
-   
-endmodule // wb_bus_writer