diff options
Diffstat (limited to 'fpga/usrp2/control_lib/wb_bus_writer.v')
-rw-r--r-- | fpga/usrp2/control_lib/wb_bus_writer.v | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/fpga/usrp2/control_lib/wb_bus_writer.v b/fpga/usrp2/control_lib/wb_bus_writer.v new file mode 100644 index 000000000..08e641d37 --- /dev/null +++ b/fpga/usrp2/control_lib/wb_bus_writer.v @@ -0,0 +1,74 @@ +// +// Copyright 2011 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see <http://www.gnu.org/licenses/>. +// + + +// wb_bus_writer +// +// WB Bus Master device to send a sequence of single-word transactions +// based on a list in a RAM or ROM (FASM interface) +// ROM data format is {WB_ADDR[15:0],WB_DATA[31:0]} +// continues until it gets an all-1s entry + +module wb_bus_writer (input start, + output done, + output reg [15:0] rom_addr, + input [47:0] rom_data, + // WB Master Interface, don't need wb_dat_i + input wb_clk_i, + input wb_rst_i, + output [31:0] wb_dat_o, + input wb_ack_i, + output [15:0] wb_adr_o, + output wb_cyc_o, + output [3:0] wb_sel_o, + output wb_stb_o, + output wb_we_o + ); + +`define IDLE 0 +`define READ 1 + + reg [3:0] state; + + assign done = (state != `IDLE) && (&rom_data); // Done when we see all 1s + + always @(posedge wb_clk_i) + if(wb_rst_i) + begin + rom_addr <= #1 0; + state <= #1 0; + end + else if(start) + begin + rom_addr <= #1 0; + state <= #1 `READ; + end + else if((state == `READ) && wb_ack_i) + if(done) + state <= #1 `IDLE; + else + rom_addr <= #1 rom_addr + 1; + + assign wb_dat_o = rom_data[31:0]; + assign wb_adr_o = rom_data[47:32]; + assign wb_sel_o = 4'b1111; // All writes are the full 32 bits + + assign wb_cyc_o = !done & (state != `IDLE); + assign wb_stb_o = !done & (state != `IDLE); + assign wb_we_o = !done & (state != `IDLE); + +endmodule // wb_bus_writer |