diff options
Diffstat (limited to 'fpga/usrp2/control_lib/ss_rcvr.v')
-rw-r--r-- | fpga/usrp2/control_lib/ss_rcvr.v | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/fpga/usrp2/control_lib/ss_rcvr.v b/fpga/usrp2/control_lib/ss_rcvr.v new file mode 100644 index 000000000..8e650d21b --- /dev/null +++ b/fpga/usrp2/control_lib/ss_rcvr.v @@ -0,0 +1,81 @@ + + +// Source-synchronous receiver +// Assumes both clocks are at the same rate +// Relative clock phase is +// unknown +// variable +// bounded +// The output will come several cycles later than the input + +// This should synthesize efficiently in Xilinx distributed ram cells, +// which is why we use a buffer depth of 16 + +// FIXME Async reset on rxclk side? + +module ss_rcvr + #(parameter WIDTH=16) + (input rxclk, + input sysclk, + input rst, + + input [WIDTH-1:0] data_in, + output [WIDTH-1:0] data_out, + output reg clock_present); + + wire [3:0] rd_addr, wr_addr; + + // Distributed RAM + reg [WIDTH-1:0] buffer [0:15]; + always @(posedge rxclk) + buffer[wr_addr] <= data_in; + + assign data_out = buffer[rd_addr]; + + // Write address generation + reg [3:0] wr_counter; + always @(posedge rxclk or posedge rst) + if (rst) + wr_counter <= 0; + else + wr_counter <= wr_counter + 1; + + assign wr_addr = {wr_counter[3], ^wr_counter[3:2], ^wr_counter[2:1], ^wr_counter[1:0]}; + + // Read Address generation + wire [3:0] wr_ctr_sys, diff, abs_diff; + reg [3:0] wr_addr_sys_d1, wr_addr_sys_d2; + reg [3:0] rd_counter; + + assign rd_addr = {rd_counter[3], ^rd_counter[3:2], ^rd_counter[2:1], ^rd_counter[1:0]}; + + always @(posedge sysclk) + wr_addr_sys_d1 <= wr_addr; + + always @(posedge sysclk) + wr_addr_sys_d2 <= wr_addr_sys_d1; + + assign wr_ctr_sys = {wr_addr_sys_d2[3],^wr_addr_sys_d2[3:2],^wr_addr_sys_d2[3:1],^wr_addr_sys_d2[3:0]}; + + assign diff = wr_ctr_sys - rd_counter; + assign abs_diff = diff[3] ? (~diff+1) : diff; + + always @(posedge sysclk) + if(rst) + begin + clock_present <= 0; + rd_counter <= 0; + end + else + if(~clock_present) + if(abs_diff > 5) + clock_present <= 1; + else + ; + else + if(abs_diff<3) + clock_present <= 0; + else + rd_counter <= rd_counter + 1; + +endmodule // ss_rcvr |