1 files changed, 71 insertions, 0 deletions
diff --git a/fpga/usrp2/control_lib/settings_bus_16LE.v b/fpga/usrp2/control_lib/settings_bus_16LE.v
new file mode 100644
index 000000000..7c42a0870
--- /dev/null
+++ b/fpga/usrp2/control_lib/settings_bus_16LE.v
@@ -0,0 +1,71 @@
+//
+// Copyright 2011 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+
+// Grab settings off the wishbone bus, send them out to settings bus
+// 16 bits little endian, but all registers need to be written 32 bits at a time.
+// This means that you write the low 16 bits first and then the high 16 bits.
+// The setting regs are strobed when the high 16 bits are written
+
+module settings_bus_16LE
+  #(parameter AWIDTH=16, RWIDTH=8)
+    (input wb_clk, 
+     input wb_rst, 
+     input [AWIDTH-1:0] wb_adr_i,
+     input [15:0] wb_dat_i,
+     input wb_stb_i,
+     input wb_we_i,
+     output reg wb_ack_o,
+     output strobe,
+     output reg [7:0] addr,
+     output reg [31:0] data);
+
+   reg 		       stb_int;
+   
+   always @(posedge wb_clk)
+     if(wb_rst)
+       begin
+	  stb_int <= 1'b0;
+	  addr <= 8'd0;
+	  data <= 32'd0;
+       end
+     else if(wb_we_i & wb_stb_i)
+       begin
+	  addr <= wb_adr_i[RWIDTH+1:2];  // Zero pad high bits
+	  if(wb_adr_i[1])
+	    begin
+	       stb_int <= 1'b1;     // We now have both halves
+	       data[31:16] <= wb_dat_i;
+	    end
+	  else
+	    begin
+	       stb_int <= 1'b0;     // Don't strobe, we need other half
+	       data[15:0] <= wb_dat_i;
+	    end
+       end
+     else
+       stb_int <= 1'b0;
+
+   always @(posedge wb_clk)
+     if(wb_rst)
+       wb_ack_o <= 0;
+     else
+       wb_ack_o <= wb_stb_i & ~wb_ack_o;
+
+   assign strobe = stb_int & wb_ack_o;
+          
+endmodule // settings_bus_16LE